summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-10-08Merge branch 'heads/soc2' into boards2-baseSimon Horman
2013-10-08ARM: shmobile: r8a7791 SMP supportMagnus Damm
Tie in the APMU SMP code on r8a7791. When used together with the secondary CPU device node and smp_ops in the board specific code then this will allow use of the two Cortex-A15 cores in the r8a7791 SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7779: split r8a7779_init_irq_extpin() for DTKuninori Morimoto
r8a7779 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3, and r8a7779_init_irq_extpin() is controlling it via irlm parameter. But this function registers renesas_intc_irqpin driver if irlm was set, and this value depends on platform. This is not good for DT. This patch splits r8a7779_init_irq_extpin() function into "mode settings" and "funtion register" parts Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7778: split r8a7778_init_irq_extpin() for DTKuninori Morimoto
r8a7778 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3, and r8a7778_init_irq_extpin() is controlling it via irlm parameter. But this function registers renesas_intc_irqpin driver if irlm was set, and this value depends on platform. This is not good for DT. This patch splits r8a7778_init_irq_extpin() function into "mode settings" and "funtion register" parts. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r7s72100 SCIF supportMagnus Damm
Add SCIF serial port support to the r7s72100 SoC by adding platform devices for SCIF0 -> SCIF7 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: Initial r7s72100 SoC supportMagnus Damm
Add initial support for the r7272100 SoC including: - Single Cortex-A9 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 Arch timer workaroundMagnus Damm
Make use of the R-Car Gen2 arch timer workaround on r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 IRQC platform device supportMagnus Damm
Add a platform device for the r8a7791 IRQC hardware driving IRQ pins IRQ0 to IRQ9. The Linux interrupt number is statically assigned to allow board code written in C to make use of static interrupt numbers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: Introduce r8a7791_add_standard_devices()Magnus Damm
Introduce the function r8a7791_add_standard_devices() that follows the same style as other mach-shmobile SoC code and allows C version of board code to add on-chip devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: Break out R-Car Gen2 setup codeMagnus Damm
Move arch timer workaround code and boot mode pin handling from setup-r8a7790.c to setup-rcar-gen2.c. With this in place the same code can be used on other R-Car Generation 2 devices such as r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a73a4: add a clock alias for the DMAC in DT modeGuennadi Liakhovetski
Devices, initialised from the Device Tree and from platform code usually have different names. This patch adds a clock alias for DMAC on r8a73a4 in DT mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7790: add I2C clocks and aliases for the DT modeGuennadi Liakhovetski
This patch adds clock definitions for the 4 I2C interfaces on r8a7790 and clock aliases, suitable for the DT mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7779: add HPB-DMAC supportMax Filippov
Add HPB-DMAC platform device on R8A7779 SoC along with its slave and channel configurations (only for SDHI0 so far). Signed-off-by: Max Filippov <max.filippov@cogentembedded.com> [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed <mach/dma.h> to <mach/r8a7779.h>, removed #include <mach/dma.h> from setup-r8a7779.c, removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and hpb_dmae_channels[], added ASYNCMDR.ASBTMD{20|24|43} and ASYNCMDR.ASMD{20|24|43} fields/values, fixed comments to ASYNCMDR.ASBTMD2[123] and ASYNCMDR.ASMD2[123] fields/values, renamed all the bit/field/value #define's to include 'HBP_DMAE_' prefix to match the driver, moved comments after the element initializers of hpb_dmae_channels[].] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7778: add HPB-DMAC supportMax Filippov
Add HPB-DMAC platform device on R8A7778 SoC along with its slave and channel configurations (only for SDHI0 so far). Signed-off-by: Max Filippov <max.filippov@cogentembedded.com> [Sergei: moved *enum* declaring HPB-DMAC slave IDs from now removed <mach/dma.h> to <mach/r8a7778.h>, removed #include <mach/dma.h> from setup-r8a7778.c, removed SSI-related *enum* values and SSI-related data from hpb_dmae_slaves[] and hpb_dmae_channels[], moved the comments after the element initializers of hpb_dmae_channels[].] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a73a4: add a DMAC platform device and clock for itGuennadi Liakhovetski
Add a DMAC platform device and clock definitions for it on r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08Merge tag 'renesas-smp-for-v3.13' into soc2-baseSimon Horman
Renesas ARM based SoC SMP updates for v3.13 * Add CPU notifier based SCU boot vector code - Use on emev2, r8a7779 and sh73a0 SoCs - Remove now unused shmobile_smp_scu_boot_secondary() * Add shared APMU SMP support code - Use to add SMP support for r8a7790 SoC * Introduce shmobile_boot_size * Expose shmobile_invalidate_start() * Introduce shmobile_smp_cpu_disable() - Use on sh73a0 SoC - Remove now unused shmobile_smp_init_cpus()
2013-09-30ARM: shmobile: Include CA7 cores in APMU tableMagnus Damm
Add information to the shared APMU code regarding the APMU instance used to control the CA7 cores. This can be used on r8a7790 and r8a73a4, but should most likely be converted to DT in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Extend APMU code to allow single cluster onlyMagnus Damm
Extend the APMU code with a check to only allow boot of CPU cores that sit in the same cluster as CPU0. This makes it possible for people to use the r8a790 CA7 boot mode with CA7-cores only. The default CA15 boot mode will enable CA15 cores only. This is an intentional software limitation to cope with lacking scheduler support. By removing this patch it is possible to run all 8 cores in parallel, but this is not recommended without out of tree scheduler modfications or custom user space code to control the CPU affinitiy. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Remove shmobile_smp_scu_boot_secondary()Magnus Damm
Remove shmobile_smp_scu_boot_secondary() since it is no longer used. CPU boot vector setup is instead handled by CPU notifiers. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let r8a7779 rely on SCU CPU notifierMagnus Damm
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let EMEV2 rely on SCU CPU notifierMagnus Damm
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Let sh73a0 rely on SCU CPU notifierMagnus Damm
Now when CPU notifiers are used for SCU boot vector setup shmobile_smp_scu_boot_secondary() is no longer needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Add CPU notifier based SCU boot vector codeMagnus Damm
Add CPU notifiers for the shared mach-shmobile SCU code to allow removal of the shared SCU boot_secondary code. Regarding notifiers, at CPU_UP_PREPARE time the SMP boot vector is initialized so secondary CPU cores can boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Add r8a7790 SMP support using APMU codeMagnus Damm
Add r8a7790 SMP support using the shared APMU code. To enable SMP the r8a7790 specific DTS needs to be updated to include CPU cores, and this is happening in a separate patch. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Shared APMU SMP support code without DTMagnus Damm
Introduce shared APMU SMP code for mach-shmobile. Both SMP boot up and CPU Hotplug is supported. This version does not use DT but if needed this will be added as an incremental feature patch. The code is designed around CONFIG_NR_CPUS and should in theory support any number of APMUs, however due to the current DT-less static design only a single APMU is supported. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: disable MMCIF Command Completion Signal, add CLK_CTRL2Guennadi Liakhovetski
MMCIF on r8a7790 doesn't support Command Completion Signal, but it does implement a CE_CLK_CTRL2 register. Platform parameters have to be added to account for these features on lager. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: kzm9g: disable MMCIF Command Completion SignalGuennadi Liakhovetski
MMCIF on sh73a0 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on kzm9g. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: armadillo800eva: disable MMCIF Command Completion SignalGuennadi Liakhovetski
MMCIF on r8a7740 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on armadillo800eva. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: ape6evm: disable MMCIF Command Completion SignalGuennadi Liakhovetski
MMCIF on r8a73a4 doesn't support Command Completion Signal, a platform parameter has to be added to disable it on ape6evm. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: add USB Function supportKuninori Morimoto
Bock-W USB1 (CN29) can be USB Host/Func by SW98/SW99 settings. USB Func will be enabled if CONFIG_USB_RENESAS_USBHS_UDC[_MODULE] was selected on this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Koelsch supportHisashi Nakamura
Koelsch base board support making use of 2 GiB of memory, the r8a7791 SoC with the SCIF0 serial port and CA15 with CMT timer. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready SMP/PFC] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: add R-Car sound support (PIO)Kuninori Morimoto
This patch enables R-Car sound, AK4643 (CN19) and AK4554 (CN20/CN21) codec chip on Bock-W. But, it supports PIO transfer only at this point. User can check sound settings (Dip-switch/PFC etc) via this patch, but will get under/over flow error when playback/capture. Because PIO transfer via SSI will be interrupted "sampling rate" times per 1 second. DMA transfer will be supported when HPB-DMAC was enabled on r8a7778. You will notice strange ALSA sound card HW numbering on Bock-W board. This came from AK4554 strange format on playback/capture. The format on playback/capture is same on "normal" codec chip, but AK4554 was different. Because of that, AK4554 playback/capture are registered as a different sound card. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [horms+renesas@verge.net.au: squashed cleanup of SND_SOC_xxx in Kconfig by Kuninori Morimoto] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: bockw: enable global use of FPGAKuninori Morimoto
This patch enables global use of FPGA, since it will be used from many devices. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: Fix Display Unit platform dataLaurent Pinchart
The DU device erroneously receives the DU resources array as platform data instead of the DU platform data structure. Fix it. This problem was introduced by f631fa0 ("ARM: shmobile: lager: Add Display Unit support"). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulatorsGuennadi Liakhovetski
Currently a dummy fixed always-on regulator is used for all 3 SD/MMC interfaces on ape6evm. This patch updates the board to use correct supplies for MMC0, SDHI0 and SDHI1 VDD. SDHI0 VccQ supply regulator should be implemented in a separate patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: lager: Add Display Unit supportLaurent Pinchart
Only the VGA output is currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: marzen: Add Display Unit supportLaurent Pinchart
Support the DU0 VGA and DU1 LVDS outputs. DU1 is connected to a Mitsubishi AA104XD12 panel (10.4" XGA). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7778: add usb phy power control functionKuninori Morimoto
USB phy initialisation function is needed from not only USB Host but also USB Function too. This patch adds usb phy common control function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7778: add USBHS clockKuninori Morimoto
This patch adds USBHS clock for renesas_usbhs driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 CMT supportMagnus Damm
Add r8a7791 CMT support via channel 0 of CMT0. At this point the CMT is used for clock event operation, but in the future the arch timer will be the main timer and the CMT will be used for deep sleep wake up only. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> (cherry picked from commit a7663b88280d00359715817620798e99d54d401c) Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: r8a7791 SCIF supportYoshikazu Fujikawa
Add SCIF serial port support to the r8a7791 SoC by adding platform devices for SCIFA0 -> SCIFA5 as well as SCIFB0 -> SCIFB2 and SCIF0 -> SCIF5 together with clock bindings. DT device description is excluded at this point since such bindings are still under development. Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped holes in enum] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-30ARM: shmobile: Initial r8a7791 SoC supportHisashi Nakamura
Add initial support for the r8a7791 SoC including: - Single Cortex-A15 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, dropped not-yet-ready code] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Introduce shmobile_boot_sizeMagnus Damm
Introduce shmobile_boot_size that can be used by future SMP code to determine the size of the boot code that needs to be copied to internal SRAM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Expose shmobile_invalidate_start()Magnus Damm
Expose shmobile_invalidate_start() in common.h for mach-shmobile. This function will be used for boot of secondary processors on future non-SCU SMP platforms. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Remove unused shmobile_smp_init_cpus()Magnus Damm
Remove shmobile_smp_init_cpus() since all SMP platforms in mach-shmobile now rely on DT for CPU core description instead of for instance determining number of cores from the SCU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Use shmobile_smp_cpu_disable() on sh73a0Magnus Damm
Use shmobile_smp_cpu_disable() on sh73a0 since it allows CPU Hotplug of any CPU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-20ARM: shmobile: Introduce shmobile_smp_cpu_disable()Magnus Damm
Introduce the shared CPU Hotplug function shmobile_smp_cpu_disable() for mach-shmobile. It is useful for the case when all CPUs may be hotplugged, including CPU 0. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-19ARM: shmobile: r8a7778: add SSI/SRU clock supportKuninori Morimoto
Add a platform clock for the r8a7778 SRU/SSI sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-19ARM: shmobile: r8a7790: Add DU and LVDS clocksLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-19ARM: shmobile: r8a7779: Rename DU device in clock lookups listLaurent Pinchart
The DU device will be called rcar-du-r8a7779. Rename the clock lookup entry accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 06:51:12 +0000