summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-15cifs: handle FindFirst failure gracefullySuresh Jayaraman
FindFirst failure due to permission errors or any other errors are silently ignored by cifs_readdir(). This could cause problem to applications that depend on the error to do further processing. Reproducer: - mount a cifs share - mkdir tdir;touch tdir/1 tdir/2 tdir/3 - chmod -x tdir - ls tdir Currently, we start calling filldir() for '.' and '..' before we know we whether FindFirst could succeed or not. If FindFirst fails later, there is no way to notify VFS by setting buf.error and so VFS won't be able to catch this. Fix this by moving the call to initiate_cifs_search() before we start doing filldir(). This fixes https://bugzilla.samba.org/show_bug.cgi?id=7535 Reported-by: Tom Dexter <digitalaudiorock@gmail.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-14NTLM authentication and signing - Calculate auth response per smb sessionShirish Pargaonkar
Start calculation auth response within a session. Move/Add pertinet data structures like session key, server challenge and ntlmv2_hash in a session structure. We should do the calculations within a session before copying session key and response over to server data structures because a session setup can fail. Only after a very first smb session succeeds, it copies/makes its session key, session key of smb connection. This key stays with the smb connection throughout its life. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-12cifs: don't use vfsmount to pin superblock for oplock breaksJeff Layton
Filesystems aren't really supposed to do anything with a vfsmount. It's considered a layering violation since vfsmounts are entirely managed at the VFS layer. CIFS currently keeps an active reference to a vfsmount in order to prevent the superblock vanishing before an oplock break has completed. What we really want to do instead is to keep sb->s_active high until the oplock break has completed. This patch borrows the scheme that NFS uses for handling sillyrenames. An atomic_t is added to the cifs_sb_info. When it transitions from 0 to 1, an extra reference to the superblock is taken (by bumping the s_active value). When it transitions from 1 to 0, that reference is dropped and a the superblock teardown may proceed if there are no more references to it. Also, the vfsmount pointer is removed from cifsFileInfo and from cifs_new_fileinfo, and some bogus forward declarations are removed from cifsfs.h. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-12cifs: keep dentry reference in cifsFileInfo instead of inode referenceJeff Layton
cifsFileInfo is a bit problematic. It contains a reference back to the struct file itself. This makes it difficult for a cifsFileInfo to exist without a corresponding struct file. It would be better instead of the cifsFileInfo just held info pertaining to the open file on the server instead without any back refrences to the struct file. This would allow it to exist after the filp to which it was originally attached was closed. Much of the use of the file pointer in this struct is to get at the dentry. Begin divorcing the cifsFileInfo from the struct file by keeping a reference to the dentry. Since the dentry will have a reference to the inode, we can eliminate the "pInode" field too and convert the igrab/iput to dget/dput. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-12cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)Jeff Layton
commit 3aa1c8c2900065a51268430ab48a1b42fdfe5b45 made cifs_getattr set the ownership of files to current_fsuid/current_fsgid when multiuser mounts were in use and when mnt_uid/mnt_gid were non-zero. It should have instead based that decision on the CIFS_MOUNT_OVERR_UID/GID flags. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-12CIFS ntlm authentication and signing - Build a proper av/ti pair blob for ↵Shirish Pargaonkar
ntlmv2 without extended security authentication Build an av pair blob as part of ntlmv2 (without extended security) auth request. Include netbios and dns names for domain and server and a timestamp in the blob. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08cifs: initialize tlink_tree_lock and tlink_treeJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08Merge branch 'for-next'Steve French
2010-10-08[CIFS] Remove build warningSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08cifs: fix module refcount leak in find_domain_nameJeff Layton
find_domain_name() uses load_nls_default which takes a module reference on the appropriate NLS module, but doesn't put it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08cifs: implement recurring workqueue job to prune old tconsJeff Layton
Create a workqueue job that cleans out unused tlinks. For now, it uses a hardcoded expire time of 10 minutes. When it's done, the work rearms itself. On umount, the work is cancelled before tearing down the tlink tree. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-08cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #5)Jeff Layton
...when unix extensions aren't enabled. This makes everything on the mount appear to be owned by the current user. This version of the patch differs from previous versions however in that the admin can still force the ownership of all files to appear as a single user via the uid=/gid= options. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07Merge branch 'hwpoison-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6 * 'hwpoison-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: HWPOISON: Stop shrinking at right page count HWPOISON: Report correct address granuality for AO huge page errors HWPOISON: Copy si_addr_lsb to user page-types.c: fix name of unpoison interface
2010-10-07Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: elevator: fix oops on early call to elevator_change()
2010-10-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: check return code of read_sb_page md/raid1: minor bio initialisation improvements. md/raid1: avoid overflow in raid1 resync when bitmap is in use.
2010-10-07Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: don't drop handle reference on unload drm/ttm: Fix two race conditions + fix busy codepaths
2010-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix runtime PM related deadlock Input: joydev - fix JSIOCSAXMAP ioctl Input: uinput - setup MT usage during device creation
2010-10-07Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: properly account for reclaimed inodes
2010-10-07Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (37 commits) V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() call V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent() V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interface V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error on S5PV210 SoCs V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failure V4L/DVB: uvcvideo: Restrict frame rates for Chicony CNF7129 webcam V4L/DVB: uvcvideo: Fix support for Medion Akoya All-in-one PC integrated webcam V4L/DVB: ivtvfb: prevent reading uninitialized stack memory V4L/DVB: cx25840: Fix typo in volume control initialization: 65335 vs. 65535 V4L/DVB: v4l: mem2mem_testdev: add missing release for video_device V4L/DVB: v4l: mem2mem_testdev: fix errorenous comparison V4L/DVB: mt9v022.c: Fixed compilation warning V4L/DVB: mt9m111: added current colorspace at g_fmt V4L/DVB: mt9m111: cropcap and s_crop check if type is VIDEO_CAPTURE V4L/DVB: mx2_camera: fix a race causing NULL dereference V4L/DVB: tm6000: bugfix data handling V4L/DVB: gspca - sn9c20x: Bad transfer size of Bayer images V4L/DVB: videobuf-dma-sg: set correct size in last sg element V4L/DVB: cx231xx: Avoid an OOPS when card is unknown (card=0) V4L/DVB: dvb: fix smscore_getbuffer() logic ...
2010-10-07Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: of/i2c: Fix module load order issue caused by of_i2c.c i2c: Fix checks which cause legacy suspend to never get called i2c-pca: Fix waitforcompletion() return value i2c: Fix for suspend/resume issue i2c: Remove obsolete cleanup for clientdata
2010-10-07sysctl: fix min/max handling in __do_proc_doulongvec_minmax()Eric Dumazet
When proc_doulongvec_minmax() is used with an array of longs, and no min/max check requested (.extra1 or .extra2 being NULL), we dereference a NULL pointer for the second element of the array. Noticed while doing some changes in network stack for the "16TB problem" Fix is to not change min & max pointers in __do_proc_doulongvec_minmax(), so that all elements of the vector share an unique min/max limit, like proc_dointvec_minmax(). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07MAINTAINERS: add Samsung S5P series FIMC maintainersKyungmin Park
Add Samsung S5P series FIMC(Camera Interface) maintainers. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07MAINTAINERS: Haavard has movedAndrew Morton
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07memcg: fix thresholds with use_hierarchy == 1Kirill A. Shutemov
We need to check parent's thresholds if parent has use_hierarchy == 1 to be sure that parent's threshold events will be triggered even if parent itself is not active (no MEM_CGROUP_EVENTS). Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07mm: alloc_large_system_hash() printk overflow on 16TB bootRobin Holt
During boot of a 16TB system, the following is printed: Dentry cache hash table entries: -2147483648 (order: 22, 17179869184 bytes) Signed-off-by: Robin Holt <holt@sgi.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07[CIFS] Various small checkpatch cleanupsSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07cifs: add "multiuser" mount optionJeff Layton
This allows someone to declare a mount as a multiuser mount. Multiuser mounts also imply "noperm" since we want to allow the server to handle permission checking. It also (for now) requires Kerberos authentication. Eventually, we could expand this to other authtypes, but that requires a scheme to allow per-user credential stashing in some form. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07cifs: add routines to build sessions and tcons on the flyJeff Layton
This patch is rather large, but it's a bit difficult to do piecemeal... For non-multiuser mounts, everything will basically work as it does today. A call to cifs_sb_tlink will return the "master" tcon link. Turn the tcon pointer in the cifs_sb into a radix tree that uses the fsuid of the process as a key. The value is a new "tcon_link" struct that contains info about a tcon that's under construction. When a new process needs a tcon, it'll call cifs_sb_tcon. That will then look up the tcon_link in the radix tree. If it exists and is valid, it's returned. If it doesn't exist, then we stuff a new tcon_link into the tree and mark it as pending and then go and try to build the session/tcon. If that works, the tcon pointer in the tcon_link is updated and the pending flag is cleared. If the construction fails, then we set the tcon pointer to an ERR_PTR and clear the pending flag. If the radix tree is searched and the tcon_link is marked pending then we go to sleep and wait for the pending flag to be cleared. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-07HWPOISON: Stop shrinking at right page countAndi Kleen
When we call the slab shrinker to free a page we need to stop at page count one because the caller always holds a single reference, not zero. This avoids useless looping over slab shrinkers and freeing too much memory. Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07HWPOISON: Report correct address granuality for AO huge page errorsAndi Kleen
The SIGBUS user space signalling is supposed to report the address granuality of a corruption. Pass this information correctly for huge pages by querying the hpage order. Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07HWPOISON: Copy si_addr_lsb to userAndi Kleen
The original hwpoison code added a new siginfo field si_addr_lsb to pass the granuality of the fault address to user space. Unfortunately this field was never copied to user space. Fix this here. I added explicit checks for the MCEERR codes to avoid having to patch all potential callers to initialize the field. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07page-types.c: fix name of unpoison interfaceNaoya Horiguchi
The page-types utility still uses an out of date name for the unpoison interface: debugfs:hwpoison/renew-pfn This patch renames and fixes it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07elevator: fix oops on early call to elevator_change()Jens Axboe
2.6.36 introduces an API for drivers to switch the IO scheduler instead of manually calling the elevator exit and init functions. This API was added since q->elevator must be cleared in between those two calls. And since we already have this functionality directly from use by the sysfs interface to switch schedulers online, it was prudent to reuse it internally too. But this API needs the queue to be in a fully initialized state before it is called, or it will attempt to unregister elevator kobjects before they have been added. This results in an oops like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000051 IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 PGD 47ddfc067 PUD 47c6a1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq CPU 2 Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffff8116f15e>] [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP: 0018:ffff88027da25d08 EFLAGS: 00010246 RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000 RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88 RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0 R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528 FS: 00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090) Stack: ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88 <0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77 <0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528 Call Trace: [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60 [<ffffffff8123feb9>] kobject_add+0x69/0x90 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0 [<ffffffff81224204>] elv_register_queue+0x34/0xa0 [<ffffffff81224aad>] elevator_change+0xfd/0x250 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t] [<ffffffff810001de>] do_one_initcall+0x3e/0x170 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6 RIP [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP <ffff88027da25d08> CR2: 0000000000000051 ---[ end trace a6541d3bf07945df ]--- Fix this by adding a registered bit to the elevator queue, which is set when the sysfs kobjects have been registered. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-07drm: don't drop handle reference on unloadDave Airlie
since the handle references are all tied to a file_priv, and when it disappears all the handle refs go with it. The fbcon ones we'd only notice on unload, but the nouveau notifier one would would happen on reboot. nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com> nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com> i915 unload: Reported-by: Keith Packard <keithp@keithp.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06xfs: properly account for reclaimed inodesJohannes Weiner
When marking an inode reclaimable, a per-AG counter is increased, the inode is tagged reclaimable in its per-AG tree, and, when this is the first reclaimable inode in the AG, the AG entry in the per-mount tree is also tagged. When an inode is finally reclaimed, however, it is only deleted from the per-AG tree. Neither the counter is decreased, nor is the parent tree's AG entry untagged properly. Since the tags in the per-mount tree are not cleared, the inode shrinker iterates over all AGs that have had reclaimable inodes at one point in time. The counters on the other hand signal an increasing amount of slab objects to reclaim. Since "70e60ce xfs: convert inode shrinker to per-filesystem context" this is not a real issue anymore because the shrinker bails out after one iteration. But the problem was observable on a machine running v2.6.34, where the reclaimable work increased and each process going into direct reclaim eventually got stuck on the xfs inode shrinking path, trying to scan several million objects. Fix this by properly unwinding the reclaimable-state tracking of an inode when it is reclaimed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@kernel.org Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-10-07md: check return code of read_sb_pageVasiliy Kulikov
Function read_sb_page may return ERR_PTR(...). Check for it. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-07md/raid1: minor bio initialisation improvements.NeilBrown
When performing a resync we pre-allocate some bios and repeatedly use them. This requires us to re-initialise them each time. One field (bi_comp_cpu) and some flags weren't being initiaised reliably. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-07md/raid1: avoid overflow in raid1 resync when bitmap is in use.NeilBrown
bitmap_start_sync returns - via a pass-by-reference variable - the number of sectors before we need to check with the bitmap again. Since commit ef4256733506f245 this number can be substantially larger, 2^27 is a common value. Unfortunately it is an 'int' and so when raid1.c:sync_request shifts it 9 places to the left it becomes 0. This results in a zero-length read which the scsi layer justifiably complains about. This patch just removes the shift so the common case becomes safe with a trivially-correct patch. In the next merge window we will convert this 'int' to a 'sector_t' Reported-by: "George Spelvin" <linux@horizon.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-06Linux 2.6.36-rc7v2.6.36-rc7Linus Torvalds
2010-10-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Octeon: Place cnmips_cu2_setup in __init memory. MIPS: Don't place cu2 notifiers in __cpuinitdata MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin MIPS: Alchemy: Resolve prom section mismatches MIPS: Fix syscall 64 bit number comments. MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls. MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN MIPS: N32: Fix getdents64 syscall for n32 MIPS: Remove pr_<level> uses of KERN_<level> MIPS: PNX8550: Sort out machine halt, restart and powerdown functions. MIPS: GIC: Remove dependencies from Malta files. MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC. MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask. MIPS: Audit: Fix hang in entry.S. MIPS: Document why RELOC_HIDE is there. MIPS: Octeon: Determine if helper needs to be built MIPS: Use generic atomic64 for 32-bit kernels MIPS: RM7000: Symbol should be static MIPS: kspd: Adjust confusing if indentation MIPS: Fix a typo.
2010-10-06Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: always use sb->s_bdi for writeback purposes
2010-10-06Merge branch 'v2.6.36-rc6-urgent-fixes' of ↵Linus Torvalds
git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: do not initialize PV timers on HVM if !xen_have_vector_callback xen: do not set xenstored_ready before xenbus_probe on hvm
2010-10-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Initialize total_len in fuse_retrieve()
2010-10-06ntlm authentication and signing - Correct response length for ntlmv2 ↵Shirish Pargaonkar
authentication without extended security Fix incorrect calculation of case sensitive response length in the ntlmv2 (without extended security) response. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-06cifs: fix cifs_show_options to show "username=" or "multiuser"Jeff Layton
...based on CIFS_MOUNT_MULTIUSER flag. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-06cifs: have find_readable/writable_file filter by fsuidJeff Layton
When we implement multiuser mounts, we'll need to filter filehandles by fsuid. Add a flag for multiuser mounts and code to filter by fsuid when it's set. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-06cifs: have cifsFileInfo hold a reference to a tlink rather than tcon pointerJeff Layton
cifsFileInfo needs a pointer to a tcon, but it doesn't currently hold a reference to it. Change it to keep a pointer to a tcon_link instead and hold a reference to it. That will keep the tcon from being freed until the file is closed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-06cifs: add refcounted and timestamped container for holding tconsJeff Layton
Eventually, we'll need to track the use of tcons on a per-sb basis, so that we know when it's ok to tear them down. Begin this conversion by adding a new "tcon_link" struct and accessors that get it. For now, the core data structures are untouched -- cifs_sb still just points to a single tcon and the pointers are just cast to deal with the accessor functions. A later patch will flesh this out. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-05powerpc: remove unused variableStephen Rothwell
Since powerpc uses -Werror on arch powerpc, the build was broken like this: cc1: warnings being treated as errors arch/powerpc/kernel/module.c: In function 'module_finalize': arch/powerpc/kernel/module.c:66: error: unused variable 'err' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-06drm/ttm: Fix two race conditions + fix busy codepathsThomas Hellstrom
This fixes a race pointed out by Dave Airlie where we don't take a buffer object about to be destroyed off the LRU lists properly. It also fixes a rare case where a buffer object could be destroyed in the middle of an accelerated eviction. The patch also adds a utility function that can be used to prematurely release GPU memory space usage of an object waiting to be destroyed. For example during eviction or swapout. The above mentioned commit didn't queue the buffer on the delayed destroy list under some rare circumstances. It also didn't completely honor the remove_all parameter. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=615505 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591061 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-13 10:47:23 +0000