| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
Pull "Samsung 2nd DT updates for v3.19" from Kukjin Kim:
- add micro SD card SDHCI node for exynos4412-trats
- add exynos4415 DT
- add exynos3250-rinato DT and sleep mode support
Note: based on previous tags/samsung-dt for v3.19
* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Add micro SD card SDHCI node for exynos4412-trats
ARM: dts: Add dts files for exynos4415 SoC
ARM: dts: Add sleep mode of regulator for exynos3250-rinato
ARM: dts: Add sleep mode pin configuration for exynos3250-rinato
ARM: dts: Add board dts file for exynos3250-rinato
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "temporarily disable rk3288-smp" from Heiko Stuebner:
Disable smp again on rk3288 temporarily to make Olof's boottest
run again, until the patches for using the physical architected
timers got accepted.
* tag 'v3.19-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: temporarily disable smp on rk3288
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This avoids a boot regression
* sunxi/dt:
Revert "ARM: dts: sunxi: unify APB1 clock"
Revert "ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks."
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit e883d67285e9267c73f8d2b9d32aa9e712ad00a4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/7h1toxr0ku.fsf@deeprootsystems.com
|
|
This reverts commit 338302ae32b7be73da97b746f660b283642cfc5c.
This is one of two commits that resulted in a boot regression.
Conflicts:
arch/arm/boot/dts/sun6i-a31.dtsi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/7h1toxr0ku.fsf@deeprootsystems.com
|
|
Stock firmware on rk3288 does not initizalize the CNTVOFF registers
of the architected timer correctly. This introduces issues with the
newly added SMP support for rk3288, resulting in rcu stalls due to
differing timer values per core.
There exist preliminary and tested patches for u-boot for this problem,
but there are a minority of boards using other bootloaders like coreboot.
There also is currently a second solution for miss-initialized architected
timers in the works:
- clocksource: arch_timer: Fix code to use physical timers when requested
- clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
Therefore disable smp on rk3288 again till these are finalized, also
allowing coreboot-based boards to boot again.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.rocketboards.org/linux-socfpga-next into next/dt
Pull "SoCFPGA DTS updates for v3.19" from Dinh Nguyen:
- Add DTS support for a new chip in the SOCFPGA family, the Arria 10.
- Enable watchdog node.
- Add SPI nodes.
- Add the OCRAM node.
* tag 'socfpga_dts_updates_for_v3.19' of git://git.rocketboards.org/linux-socfpga-next:
arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC
arm: dts: socfpga: enable watchdog for socfpga platform
arm: dts: socfpga: Add SPI nodes to SOCFPGA DT.
arm: dts: socfpga: Add OCRAM node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:
* Add labels for LEDs on kzm9g-reference and koelsch
* Add Sound support to r8a7790/lager and r8a7791/koelsch
* Add IIC DMA nodes to r8a7790 and r8a7791
* Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
* Add SGX, MMP and VSP1 clocks to r8a7794
* Add USBDMAC{0,1} clocks to r8a7790 and r8a7791
* tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree
ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree
ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree
ARM: shmobile: r8a7794: Add SGX clock to device tree
ARM: shmobile: koelsch: add Volume Ramp usage on comment
ARM: shmobile: lager: add Volume Ramp usage on comment
ARM: shmobile: r8a7791: add DMA nodes for IIC
ARM: shmobile: r8a7790: add DMA nodes for IIC
ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs
ARM: shmobile: koelsch dts: Add labels for the LEDs
ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
ARM: shmobile: koelsch: Sound DMA support via DVC on DTS
ARM: shmobile: koelsch: Sound DMA support via SRC on DTS
ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS
ARM: shmobile: koelsch: Sound DMA support on DTS
ARM: shmobile: koelsch: Sound PIO support on DTS
ARM: shmobile: koelsch: fixup I2C2 clock frequency
ARM: shmobile: lager: Sound DMA support via DVC on DTS
ARM: shmobile: lager: Sound DMA support via SRC on DTS
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.infradead.org/users/hesselba/linux-berlin into next/dt
Pull "Berlin DT changes for v3.19 (round 2)" from Sebastian Hesselbarth:
- AHCI and SATA PHY nodes for BG2
- USB and USB PHZ nodes for BG2/BG2CD/BG2Q
* tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
ARM: dts: berlin: enable USB on the Google Chromecast
ARM: dts: berlin: add BG2CD nodes for USB support
ARM: dts: Berlin: enable USB on the BG2Q DMP
ARM: dts: berlin: add BG2Q nodes for USB support
ARM: berlin: Enable SATA on Sony NSZ-GS7
ARM: berlin: Add AHCI and SATA PHY nodes to BG2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Arria 10 is latest SOC+FPGA from the Altera SOCFPGA platform. The Arria10
SOC shares some similarities with the SOCFPGA Cyclone5 and Arria5, but there
are enough differences to warrant a new base dtsi.
The differences are:
* 3 EMAC controllers
* 5 I2C controllers
* 3 SPI controllers
* 1.5 GHZ dual A9s
* Support for DDR4
Besides the usual memory map and IRQ changes, the clock framework will be
different, so this patch just adds the fixed-clocks.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
|
|
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
|
|
Add 2 SPI nodes to SOCFPGA device tree.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
|
|
Add a 64KB ocram node for SOCFPGA.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "ARM: rockchip: second batch of dts related changes" from Heiko Stuebner:
- the dts part of the rk3288 smp support
- rate init for rk3288 clocks
- enablement of various peripherals
- new boardfile for Haoyu Marsboard (rk3066 based)
* tag 'v3.19-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable PWM on Radxa Rock
ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi
ARM: dts: rk3288: add VOP iommu nodes
ARM: dts: rockchip: add reset for CPU nodes
ARM: dts: rockchip: add intmem node for rk3288 smp support
ARM: dts: rockchip: add pmu references to cpus nodes
ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner Device Tree Changes for 3.19" from Maxime Ripard:
A lot of things happened during that merge window, but mostly:
- Preliminary Support for the A80
- New Boards Support
+ Mele M3
+ Banana Pi
+ Optimus
+ OLinuXino Lime2
- Device Tree Relicensing to GPLv2/X11 dual license
* tag 'sunxi-dt-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (52 commits)
ARM: dts: sun6i: Add ethernet support to M9 board
ARM: sun6i: DT: Add PLL6 multiple outputs
ARM: dts: sun6i: Add support for the status led
ARM: dts: sun6i: Add EHCI support for the M9 board
ARM: dts: sunxi: Add regulator-boot-on property to ahci-5v regulator
ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS
ARM: dts: sun7i: Cubietruck: override regulator pin
ARM: sun7i: dtsi: add support for usbphy0
ARM: dtsi: sunxi: add common VBUS regulator
ARM: dts: sunxi: Banana Pi: increase startup-delay for the GMAC PHY regulator
ARM: dts: sunxi: Use sun4i-a10-apb1-clk for sun6i/sun8i apb2 clocks.
ARM: dts: sunxi: unify APB1 clock
ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller
ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11
ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11
ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11
ARM: sun4i: pcduino: Relicense the device tree under GPLv2/X11
ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11
ARM: dts: sun9i: Enable uart4 for A80 Optimus board
ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/dt
Pull "ARM: meson: DTS related changes" from Carlo Caione:
here is the pull request for the DT related changes for the 3.19.
It's mainly the work done by Beniamino for the preliminary support of
the Amlogic Meson8 SoC, the support for L2 cache and the I2C
controller.
Please note that the support for the Tronsmart S89 Elite TV box has not
been included since the Meson8 development will be done now on a
different dev board kindly provided by Amlogic.
* tag 'v3.19-meson-dts' of https://github.com/carlocaione/linux-meson:
ARM: dts: meson: add I2C controller nodes
ARM: meson: DTS: enable L2 cache
ARM: dts: add dtsi for Amlogic Meson8 SoCs
DTS: meson: Add forgotten compatible in board DTS
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.stlinux.com/devel/kernel/linux-sti into next/dt
Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin:
Highlights:
-----------
- Refactor STiH407 SoC and board to add STiH410 SoC support
- Add USB support to STiH416 SoC
* tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti:
ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000
ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs
ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.
ARM: STi: DT: STih407: Abstract common dt nodes into shared files.
ARM: STi: DT: STiH410: Add pinctl config for usb controllers.
ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks
ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.
ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy
ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/dt
Pull "Add support for mt6592, mt8127 and mt8135 Socs from Mediatek"
from Matthias Brugger:
Here comes the pull request which introduces basic support for
Mediatek SoCs mt6592, mt8127 and mt8135.
The patches for the mt81xx got merged in the late tree for v3.18 but
were not be merged at the end. They got a small fix regarding the
compatible and model string in the dts files.
* tag 'v3.19-next-dts' of https://github.com/mbgg/linux-mediatek:
dt-bindings: add documentation for Mediatek SoC
ARM: mediatek: add dts for mt6592-evb
ARM: mediatek: Add basic support for mt6592
dt-bindings: add more chips in documentation for Mediatek SoC
ARM: dts: Build dtb for mt8127 & mt8135
ARM: mediatek: add dts for MT8135 evaluation board.
ARM: mediatek: Add basic support for mt8135
ARM: mediatek: add dts for 8127 Moose board
ARM: mediatek: Add basic support for mt8127
Signed-off-by; Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
Pull "Keystone dts updates for 3.19" from Santosh Shilimkar:
- PCIE controller related updates
- 1GBe phy related upates
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1
ARM: dts: keystone: add DT bindings for PCI controller for port 0
ARM: dts: k2l-evm: add 1g ethernet phys nodes
ARM: dts: k2e-evm: add 1g ethernet phys nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/dt
Pull "Broadcom Cygnus SoC Device Tree changes" from Florian Fainelli:
This pull request contains the Broadcom Cygnus Device Tree changes:
- binding documentation for the SoC and clock
- cygnus SoC and clock dtsi files
- DTS for Cygnus Entreprise phone, BCM911360K and BCM958300K
* tag 'arm-soc/for-3.19/cygnus-dts-v2' of http://github.com/brcm/linux:
ARM: dts: Enable Broadcom Cygnus SoC
dt-bindings: Document Broadcom Cygnus SoC and clocks
[arnd: something went wrong here, we already had pulled an earlier
version of the same patches, which had the wrong license statement.
I've pulled this one over the old pull request and fixed up the
conflicts now]
Conflicts:
arch/arm/boot/dts/bcm-cygnus-clock.dtsi
arch/arm/boot/dts/bcm-cygnus.dtsi
arch/arm/boot/dts/bcm911360_entphn.dts
arch/arm/boot/dts/bcm911360k.dts
arch/arm/boot/dts/bcm958300k.dts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
compatible property
This patch corrects the vendor-prefix for isl29028 in the compatible property from
"isil,isl29028" to "isl,isl29028" according to listed vendor-prefixes in
Documentation/devicetree/bindings/vendor-prefixes.txt. Incorrect vendor-prefix "isl"
was reported by checkpatch.pl warning for drivers/staging/iio/light/isl29028.c.
Thus incorrect vendor-prefix "isil" was corrected for every mention of device isl29028.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds the correct vendor-prefix for device isl29028 and
maintains deprecated vendor-prefix found by checkpatch warning
for older kernel releases.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch documents deprecated vendor name "isil" to fix warning of
undocumented string for device isl29028 as reported while running checkpatch.pl
on drivers/staging/iio/light/isl29028.c. This is done to maintain compatibility
with older kernels.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch documents the device isl29028 with its vendor-prefix. Undocumented deprecated vendor-prefix
found by checkpatch also documented for compatibility reasons.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The model B and B+ differ in the GPIO lines for ACT and PWR leds, and the
I2S interface.
Signed-off-by: Matthias Klein <matthias.klein@linux.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Device tree related changes for omaps" from Tony Lindgren:
- Fix currently harmless but wrong sizes for various GPMC connected
devices
- Set up timings for several GPMC connected devices to get rid of
bootloader dependencies in later patches
- Enable various drivers for dra7xx
- Prepare Igep boards to support new variants
- Add intial support for BeagleBoard-X15
* tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (37 commits)
ARM: dts: DRA7: Add aliases for all serial ports
ARM: dts: Add am57xx-beagle-x15
ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device.
ARM: dts: omap3-igep00x0: Remove i2c2 node.
ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F
ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.
ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G
ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file.
ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module.
ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree.
ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree.
ARM: dts: omap3-igep00x0: Move NAND configuration to a common place.
ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.
ARM: dts: dra7: add labels to DWC3 nodes
ARM: dts: dra72x-evm: Enable CPSW and MDIO
ARM: dts: dra7-evm: Keep all VDD rails always-on
ARM: dts: dra72-evm: Add MMC nodes
ARM: dts: dra72-evm: Add power button node
ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC
ARM: dts: dra72-evm: Add regulator information to USB2 PHYs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull "mvebu DT changes for v3.19" from Jason Cooper:
- mvebu
- ReadyNAS 102 leds, esata
- ReadyNAS 2120 esata
- Add cache-unified for Aurora L2 node
- Add ref clk for timer and watchdog on Armada 375
- Cleanup Armada XP pinctrl for GigE
- Add RGMII pinctrl, i2c eeprom, and fix 74hc595 counter on Lenovo ix4-300d
- kirkwood
- Add DLink DIR665 and it's DSA configuration
* tag 'mvebu-dt-3.19' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: armada-xp: Fix 74hc595 count for Lenovo ix4-300d
ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d
ARM: mvebu: armada-xp: Add RGMII pinctrl to Lenovo ix4-300d
ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII
ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII
ARM: mvebu: armada-xp: Use pinctrl node alias
ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address
ARM: mvebu: armada-xp: Consolidate pinctrl node
ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
ARM: Kirkwood: Add support for DLink DIR665
ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120
ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file
arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts file
ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/dt
Pull "ARM: DT: Hisilicon terminal SoC HiX5HD2 DT updates for 3.19" from Wei Xu:
- Add reboot node, reusing syscon-reboot
- Add I2C nodes Hisilicon IP
- Add IR node based on Hisilicon IP
- Add Watchdog node based on ARM IP
- Add GPIO nodes based on ARM GPIO IP
- Add SATA node based on Hisilicon IP
- Add USB nodes
- Add MMC nodes based on Synopsys IP
- Add GMAC nodes based on Hisilicon IP
* tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hix5hd2: add reboot node
ARM: dts: hix5hd2: add i2c node
ARM: dts: hix5hd2: add ir node
ARM: dts: hix5hd2: add wdg node
ARM: dts: hix5hd2: add gpio node
ARM: dts: hix5hd2: add sata node
ARM: dts: hix5hd2: add usb node
ARM: dts: hix5hd2: add mmc node
ARM: dts: hix5hd2: add gmac node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Third Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:
* Use keyboard as gpio-keys node name
* tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name
ARM: shmobile: koelsch: Use keyboard as gpio-keys node name
ARM: shmobile: lager: Use keyboard as gpio-keys node name
ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:
* Drop console= bootargs parameter on alt
* Correct scifb* naming on r8a73a4
* Drop 0x unit-address prefixes
* Remove unnecessary MMC options
* tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: alt dts: Drop console= bootargs parameter
ARM: shmobile: r8a73a4: fix scifb* naming
ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix
ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix
ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix
ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options
ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options
ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:
* Add Add SoC-specific SATA compatible property to r8a7779
* Enable DMA for MMCIF on r8a7791 and r8a7790
* Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790
* Enable TMU timer via DT on r8a7778
* Enable CMT timer via DT on r8a73a4
* Add MMP and {SR}GX clocks to r8a7791 and r8a7790
* Correct scifa2 clock index on r8a7740
* Add missing INTCA for irqpin on r8a7740
* tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node
ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes
ARM: shmobile: r8a7791: Add MMCIF0 DT node
ARM: shmobile: r8a7790: Rename mmcif node to mmc
ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property
ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property
ARM: shmobile: henninger: enable HS-USB
ARM: shmobile: koelsch: enable HS-USB
ARM: shmobile: r8a7791: add HS-USB device node
ARM: shmobile: lager: enable HS-USB
ARM: shmobile: r8a7790: add HS-USB device node
ARM: shmobile: r8a7791: add USB3.0 device node
ARM: shmobile: lager: enable USB3.0
ARM: shmobile: r8a7790: add USB3.0 device node
ARM: shmobile: r8a7794: Add arch_timer to device tree
ARM: shmobile: bockw-reference: Initialise TMU device using DT
ARM: shmobile: r8a7778: Add TMU nodes
ARM: shmobile: armadillo800eva dts: Enable TMU0
ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a base for the DT updates, merged through the arm-soc
cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The LEDs on the kzm9g board are labeled using upper-case characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The LEDs on the koelsch board are labeled using upper-case characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The IIC nodes used the generic compatible properties only.
This causes the driver to fail when using Standard Speed, as the
operational clock is driven by the 104 MHz HP clock:
i2c-sh_mobile e6820000.i2c: timing values out of range: L/H=0x208/0x1bf
i2c-sh_mobile: probe of e6820000.i2c failed with error -22
Add the SoC-specific compatible property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The IIC nodes used the generic compatible properties only.
This may cause the driver to fail when using Standard Speed on IIC
masters where the operational clock is driven by the 130 MHz HP clock.
Add the SoC-specific compatible property to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
DMA transfer uses DVC
DMA DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
DMA transfer to/from SRC
DMA DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]
Current sound driver is supporting
SSI/SRC random connection.
So, this patch is tring
SSI0 -> SRC2
SSI1 <- SRC3
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
DMA transfer to/from SSIU
DMA
[MEM] -> [SSIU] -> [SSI]
DMA
[MEM] <- [SSIU] <- [SSI]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
DMA transfer to/from SSI
DMA
[MEM] -> [SSI]
DMA
[MEM] <- [SSI]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Current Koelsch I2C2 has 400kHz settings,
but, ak4643 audio codec chip which is connected to I2C2 can't
work such frequency.
Fixup I2C2 clock frequency to 100kHz.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
