summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-03-08Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.Eran
The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012 and requires a firmware to be uploaded before it's usable. output of usb-devices for this module: T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3375 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Eran <eran@over-here.org> Tested-by: Michal Labedzki <michal.labedzki@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-07Bluetooth: Fix coding style in all .h filesGustavo F. Padovan
Proper align the struct definitions. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-07Bluetooth: Use correct type for userspace exported structsGustavo F. Padovan
It should be __u8 instead of u8. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-07Bluetooth: Fix coding style in mgmt.hGustavo F. Padovan
Align struct definition in a proper way. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-06Bluetooth: btusb: add support for BCM20702A0 [0a5c:21e6]James M. Leddy
Add another vendor specific ID for BCM20702A0. This has been tested and works on hardware with this device. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AFB227B C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: James M. Leddy <james.leddy@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-03Bluetooth: Don't force DISCOVERY_STOPPED state in inquiry_cache_flushAndre Guedes
We are not supposed to force DISCOVERY_STOPPED in inquiry_cache_flush because we may break the discovery state machine. For instance, during interleaved discovery, when we are about to start inquiry, the state machine forcibly goes to DISCOVERY_STOPPED while it should stay in DISCOVERY_FINDING state. This problem results in unexpected behaviors such as sending two mgmt_discovering events to userspace (when only one event is expected) and Stop Discovery failures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-03Bluetooth: mgmt: Fix updating local name when powering onJohan Hedberg
When powering on we need to apply whatever name has been set through mgmt_set_local_name. The appropriate place for this is mgmt_powered() and not hci_setup() since this needs to be applied also if the HCI init sequence was already completed but the adapter was still "powered off" from a mgmt perspective due the the HCI_AUTO_OFF still being set. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-03Bluetooth: Remove HCI_PI_MGMT_INIT flag for socketsJohan Hedberg
This flag is of no use right now and is in fact harmful in that it prevents the HCI_MGMT flag to be set for any controllers that may need it after the first one that bluetoothd takes into use (the flag is cleared for the first controller so any subsequent ones through the same bluetoothd mgmt socket never get the HCI_MGMT flag set). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: mgmt: Add new error code for invalid indexJohan Hedberg
The index is part of the command header and not its parameters so it makes sense to distinguish this from the invalid parameters error. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: mgmt: Fix command status error code valuesJohan Hedberg
Error codes in the command status should always be from the set of values defined for mgmt and never e.g. POSIX error codes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: Fix clearing of HCI_PENDING_CLASS flagJohan Hedberg
When doing reset HCI_PENDING_CLASS is one of the flags that should be cleared (since it's used for a pending HCI command and a reset clear all pending commands). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: Update MGMT and SMP timeout constants to use msecs_to_jiffiesMarcel Holtmann
The MGMT and SMP timeout constants are always used in form of jiffies. So just include the conversion from msecs in the define itself. This has the advantage of making the code where the timeout is used more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-02Bluetooth: Update L2CAP timeout constants to use msecs_to_jiffiesMarcel Holtmann
The L2CAP timeout constants are always used in form of jiffies. So just include the conversion from msecs in the define itself. This has the advantage of making the code where the timeout is used more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-01Bluetooth: mgmt: Centralize message length checksJohan Hedberg
This patch moves the command length information into the command handler table allowing the removal of length checks from the handler functions and doing the check in a single place before calling the handler function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: mgmt: Add defines for command sizesJohan Hedberg
These defines are shorter than "sizeof(struct mgmt_cp_foo_bar...)" and will be helpful when extending the command lookup table to contain the expected command size information. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: mgmt: Move command handlers into a tableJohan Hedberg
By moving the command handlers into a table (the index being equal to the opcode) the lookup is made a bit more efficient. Having a struct to describe each handler also paves the way to add more meta-data for each handler, e.g. the minimum message size for the command and allow handling of common tasks like this in a centralized place. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: mgmt: Initialize HCI_MGMT flag for any commandJohan Hedberg
The read_controller_info is typically the first command that user space sends when taking a controller into use. This is also the reason why this command has been used as the trigger to set the HCI_MGMT flag. However, when not running the user-space daemon and using command line tools it is possible that read_controller_info is not the first controller specific command. This patch moves the HCI_MGMT initialization to a generic place where it will be set for whatever happens to be the first mgmt command targetting a specific controller. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: mgmt: Refactor hci_dev lookup for commandsJohan Hedberg
Almost all mgmt commands need to lookup a struct hci_dev based on the index received within the mgmt headers. It makese therefore sense to look this up in a single place and then just pass the hdev pointer to each command handler function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: Fix init sequence for some CSR based controllersJohan Hedberg
Some CSR controllers will generate a spontaneous reset during init and just eat up any pending command without sending a command complete for it. This patch solves the issue by just resending whatever was the last sent command. hci_send_cmd is not used since we need to bypass all other commands in the send queue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: Check capabilities in BR/EDR and LE-Only discoveryAndre Guedes
This patch add an extra check for BR/EDR and LE-Only discovery. This way, we are able to return error immediately if the discovery type requested is not supported by the device. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-01Bluetooth: mgmt: Add missing hci_dev locking to set_le()Johan Hedberg
The set_le() function was missing hci_dev locking which is e.g. critical for the mgmt pending command adding/removing. Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-01Bluetooth: Fix coding style with breaking linesGustavo F. Padovan
Our limit is 80 and broken lines should as right as possible. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-02-29Bluetooth: Fix Kconfig help descriptionAndre Guedes
SMP is not a kernel module, it is part of Bluetooth Core (as already described in lines above). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-29Bluetooth: Use NULL instead of integer for mgmt_device_connected paramSzymon Janc
Last param of mgmt_device_connected is of pointer type, so use NULL instead of 0 for it. This fix following sparse warning: CHECK net/bluetooth/hci_event.c net/bluetooth/hci_event.c:3262:74: warning: Using plain integer as NULL pointer Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-29Bluetooth: Change interleaved discovery behaviorAndre Guedes
According to last discussion on IRC, if an interleaved discovery is issued, but the device is not dual mode, we should return error instead of performing a regular BR/EDR or LE-only discovery. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-29Bluetooth: Save remote L2CAP fixed channel maskAndrei Emeltchenko
Fixed channel mask needs to be stored to decide whether to use A2MP for example. So far save only one relevant byte which keeps all information we need. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-29Bluetooth: change min_t() cast in hci_reassembly()Dan Carpenter
"count" is type int so the cast to __u16 truncates the high bits away and triggers a Smatch static checker warning. It looks like a high value of count could cause a forever loop, but I didn't follow it through to see if count is capped somewhere. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-29Bluetooth: use kfree_skb() instead of kfree()Dan Carpenter
sk_buffs should be freed using kfree_skb(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-28Bluetooth: Use LMP_HOST_SSP define instead of magic valuesJohan Hedberg
This patch fixes the code to use the proper LMP_HOST_SSP define instead of magic values and thereby makes the code more readable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28Bluetooth: Add missing host features definitionsJohan Hedberg
This patch adds missing SSP and "Simultaneous LE & BR/EDR" feature bit definitions to hci.h. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28Bluetooth: Remove redundant read_host_features commandsJohan Hedberg
Previously the write_le_enable would trigger a read_host_features command but since we have access to the value LE support was set to we can simply just clear or set the bit in hdev->host_features. This also removes a second unnecessary read_host_features command from the device initialization procedure since LE is only enabled after the first read_host_features command completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28Bluetooth: Don't send unnecessary write_le_enable commandJohan Hedberg
If the local host features indicate that LE is already in the state that is desired there's no point in sending the HCI command to try to change the setting. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-27Bluetooth: Use kernel int types instead of ones from stdint.hJohan Hedberg
u8/__u8/u32/etc should be used in the kernel instead of stdint.h types. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: Remove duplicated code in l2cap conn reqAndrei Emeltchenko
The same sequence sending L2CAP Connection Request was used in several places. Using subroutine makes those places easy to read. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Fix double locking in LE and conless chanAndrei Emeltchenko
Remove socket lock since chan->ops->recv locks socket itself. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Add support for creating HCI UART based AMP controllersMarcel Holtmann
In reality this might never be used for real hardware, but it is a nice feature for emulating AMP controllers within a virtual machine. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Allow HCI UART reset parameter via flags ioctlMarcel Holtmann
The flags ioctl for HCI UART drivers already allows setting of certain Bluetooth core quirks. The reset parameter fits right in here. So allow this as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Fix init request completion with AMP controllersAndrei Emeltchenko
Mark request status as done for Read Local Version HCI command. In AMP initialization this HCI command is the last and needs to be completed. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Fix init request completion with old controllersJohan Hedberg
With Bluetooth 1.1 controllers the last command in the HCI init sequence will be a write_local_name, however there was no callback to indicate init request completion in this case. This patch fixes the issue by adding the necessary callback to the write_local_name_complete handler. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: mgmt: Fix clear_uuids responseJohan Hedberg
Since the clear_uuids operation doesn't send an immediate HCI command but just sets off a timer to wait for subsequent add_uuid calls it doesn't make sense to wait until the timer fires off to send the response. Instead send the response immediately. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: mgmt: Fix dev_class related command response timingJohan Hedberg
All mgmt commands that may fire off a hci_write_class_of_device command should wait for the completion of the HCI command before sending a response to user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: mgmt: Track pending class changesJohan Hedberg
This patch adds a flag to track pending changes to the class of device. This is needed since we cannot cleanly handle multiple simultaneous commands and need to return a "busy" error status in the mgmt commands that might trigger a class change. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Add flags parameter to device_connectedJohan Hedberg
This patch updates the Device Connected events to match the latest API by adding a flags parameter to them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix clear UUIDs responseJohan Hedberg
We also need to send a proper response when clearing UUIDs. This patch adds fixes the missing response for this use case. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Move service cache setting to a more sensible placeJohan Hedberg
Since we can now add UUIDs when powered off we don't really need to always use the service cache to avoid large bursts of HCI commands. Instead, the only important use case is when we're already powered and user space starts to initialize itself. This can be easiest detected by a "clear UUIDs" operation which is where this patch moves the service cache setting. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix return value of add/remove_uuidJohan Hedberg
The Add/Remove UUID commands should return the device class instead of an empty parameter list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix update_eir/class with HCI_AUTO_OFF flag setJohan Hedberg
If we're powered but still have the HCI_AUTO_OFF flag set the update_eir and update_class functions should not do anything. Additionally these functions need to be called when the flag is finally cleared through set_powered or when powering on for real. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Set DISCOVERY_STOPPED if controller resetsAndre Guedes
If controller is reset during the discovery procedure, Start Discovery command stops working. This can be easily reproduced by running "hciconfig hci0 reset" while discovering devices, for instance. We should force discovery state to DISCOVERY_STOPPED in case we receive a reset command complete event. Otherwise we may stuck in one of the active discovery states (DISCOVERY_INQUIRY, DISCOVERY_LE_SCAN and DISCOVERY_RESOLVING) and subsequent Start Discovery commands will simply fail. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Fix count parameter in get_connections replyJohan Hedberg
This patch fixes the count parameter in the Get Connections reply message. We cannot know the right number until iterating through all connections so set the parameter value only after the loop. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-22 14:48:52 +0000