summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-01-16mac80211: more kernel-doc fixesRandy Dunlap
Fix (delete) more mac80211 kernel-doc: Warning(linux-2.6.28-git13//include/net/mac80211.h:375): Excess struct/union/enum/typedef member 'retry_count' description in 'ieee80211_tx_info' Warning(linux-2.6.28-git13//net/mac80211/sta_info.h:308): Excess struct/union/enum/typedef member 'last_txrate' description in 'sta_info' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16p54: fix oops caused by bad eepromsChristian Lamparter
This patch fixes a bug that could occur, if it the eeprom is incomplete or partly corrupted. BUG: unable to handle kernel NULL pointer dereference at 00000008 IP: p54_assign_address+0x108/0x15d [p54common] Oops: 0002 [#1] SMP Pid: 12988, comm: phy1 Tainted: P W 2.6.28-rc6-wl #3 RIP: 0010: p54_assign_address+0x108/0x15d [p54common] [...] Call Trace: p54_alloc_skb+0xa3/0xc0 [p54common] p54_scan+0x37/0x204 [p54common] [...] Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-15b44: GFP_DMA skb should not escape from driverEric Dumazet
b44 chip has some hardware limitations, that need GFP_DMA bounce buffers in some situations. In order to not deplete DMA zone, we should keep allocated GFP_DMA skb only for driver use. At rx time, we copy such skb to newly allocated skb, reusing existing copybreak infrastructure. On machines with low amount of memory, all skb meet the hardware limitation, so no copy is needed. We detect this situation using a new device flag, set to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb(). Previously allocated skb, even outside from DMA zone will then be recycled, to have minimal impact on DMA zone use. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Tested-by: Ionut Leonte <ionut.leonte@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do not use IRQF_SHARED with IRQF_DISABLEDPhil Sutter
As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared IRQs". Since these IRQs' values are hardcoded and my test system doesn't show any shared use of IRQs at all, rather make them non-shared than non-disabled. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do not stop queue herePhil Sutter
Apparently this doesn't make sense. Otherwise the queue gets disabled as soon as it's getting empty and can only be resurrected by a driver restart. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: fix handling tx_chain_tailPhil Sutter
Originally this must have been a rewrite error when introducing 'chain_index'. But the original driver did not use the previous chain item everywhere: when altering the address tx_chain_tail points to, it should move forward, not backwards. Also this is not an "index" but rather the penultimate element in the chain, so rename it accordingly. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do tx at the right positionPhil Sutter
Triggering TX before the write to the DMA status mask register leads to transferring packets with maximum payload no matter what the actual packet size is. While here, also trigger RX scheduling after writing the DMA status mask register, like it was in the original driver before it was sent upstream. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: do schedule napi after testing for itPhil Sutter
The called netif_rx_schedule() does all the work for us: - it checks the return value of netif_rx_schedule_prep() and - if everything is ok calls __netif_rx_schedule(). Before this change, the driver received absolutely nothing. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: rework korina_rx() for use with napiPhil Sutter
This function needs an early exit condition to function properly, or else caller assumes napi workload wasn't enough to handle all received packets and korina_rx is called again (and again and again and ...). Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: disable napi on close and restartPhil Sutter
Without this the driver will crash when the NIC is being restarted. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: reset resource buffer size to 1536Phil Sutter
The new value is the one used in the external patch before and allows at least a standard MTU of 1500 to be handled correctly. Impact of this change gets visible when bigger packets are to be received, issuing: | ping -s 492 <IP> and bigger payload sized led to 100% packet loss. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15korina: fix usage of driver_dataPhil Sutter
Using platform_set_drvdata() here makes no sense, since the driver_data field has already been filled with valuable data (i.e. the MAC address). Also having driver_data point to the net_device is rather pointless since struct korina_device contains an apropriate field for it. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: First slow path interrupt raceEilon Greenstein
The "read for interrupts" flag must be set before enabling slow-path interrupts as well (and not just before fast-path interrupts) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: MTU FilterEilon Greenstein
Too big packets could pass due to wrong filter size Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Indirection table initialization indexEilon Greenstein
Wrong initialization of the multi-queue indirection table - it should be using the function and not the port index Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing bracketsEilon Greenstein
Calculation bug due to missing brackets Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Fixing the doorbell sizeEilon Greenstein
The size of the doorbell is 4KB, this bug become visible when using more than 8 queues Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Endianness issuesEilon Greenstein
Adding missing le_to_cpu and disabling wrong HW endianity flag (the two complete each other) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: VLAN tagged packets without VLAN offloadEilon Greenstein
Wrong handling of tagged packet if VLAN offload is disabled caused packets to get corrupted Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Protecting the link change indicationEilon Greenstein
Without this lock, in some race conditions the driver missed link change indication Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Flow control updated before reporting the linkEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing mask when calculating flow controlEilon Greenstein
Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Using system page size for SGEEilon Greenstein
When the page size is not 4KB, the FW must be programmed to work with the right SGE boundaries and fragment list length. To avoid confusion with the BCM_PAGE_SIZE which is set to 4KB for the FW sake, another alias for the system page size was added to explicitly indicate that it is meant for the SGE Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Missing memory barriersEilon Greenstein
While working on IA64, it became clear that the following memory barriers are missing Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15bnx2x: Using singlethread work queueEilon Greenstein
Since slow-path events, including link update, are handled in work-queue, a race condition was introduced in the self-test that sometimes caused the link status to fail: the self-test was running under RTNL lock, and if the link-watch was scheduled it stoped the shared work-queue (waiting for the RTNL lock) and so the link update event was not handled until the self-test ended (releasing the RTNL lock) with failure (since the link status was not updated) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14can: fix slowpath issue in hrtimer callback functionOliver Hartkopp
Due to the loopback functionality in can_send() we can not invoke it from hardirq context which was done inside the bcm_tx_timeout_handler() hrtimer callback: [ 700.361154] [<c012228c>] warn_slowpath+0x80/0xb6 [ 700.361163] [<c013d559>] valid_state+0x125/0x136 [ 700.361171] [<c013d858>] mark_lock+0x18e/0x332 [ 700.361180] [<c013e300>] __lock_acquire+0x12e/0xb1e [ 700.361189] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361198] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361206] [<c01262a7>] __local_bh_disable+0x2b/0x64 [ 700.361213] [<c031e20a>] dev_queue_xmit+0x191/0x479 [ 700.361225] [<f8aa69a1>] can_send+0xd7/0x11a [can] [ 700.361235] [<f8ab522b>] bcm_can_tx+0x9d/0xd9 [can_bcm] [ 700.361245] [<f8ab597f>] bcm_tx_timeout_handler+0x6a/0xbc [can_bcm] [ 700.361255] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361263] [<c0134143>] __run_hrtimer+0x5a/0x86 [ 700.361273] [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm] [ 700.361282] [<c0134a50>] hrtimer_interrupt+0xb9/0x110 This patch moves the rest of the functionality from the hrtimer callback to the already existing tasklet to fix this slowpath problem. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14ax88796: start_xmit fix using net_device_opsMagnus Damm
This patch hooks up the start_xmit/tx_timeout/get_stats callbacks in the ax88796 driver since they no longer are installed by the lib8390 code. Without this patch the function dev_hard_start_xmit() crashes due to a start_xmit callback with the value NULL. While at it, update the ax88796 driver to make use of use of struct net_device_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14net: Add init_dummy_netdev() and fix EMAC driver using itBenjamin Herrenschmidt
This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14drivers/net/irda/irda-usb.c: fix buffer overflowJos-Vicente Gilabert
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=12397 We're doing an sprintf of an 11-char string into an 11-char buffer. Whoops. It breaks firmware uploading. Reported-by: Jos-Vicente Gilabert <josevteg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: handle dma mapping failuresDhananjay Phadke
o Bail out if pci_map_single() fails while replenishing rx ring. o Drop packet if pci_map_{single,page}() fail in tx. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: hold tx lock while sending firmware commandsDhananjay Phadke
Some firmware commands like mac address addition/deletion are sent on the transmit ring. So need to hold the tx lock before touching tx producer/consumer indices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: cleanup mac list on driver unloadDhananjay Phadke
This fixes a tiny memory leak when driver is unloaded. The mac address list maintained in netxen_adapter needs to deleted when driver is going down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: firmware init fixDhananjay Phadke
o Fix order or rom register writes. o Reduce udelays when writing rom registers. This cuts the firmware init time by 40%. o Do not reset core/memory clocks when reinitializing driver. Firmware willl handle this when initialized. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix link speed reporting for some boardsDhananjay Phadke
o Read negotiated link speed when link state changes. o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and 10Gbps ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix ipv6 offload and tx cleanupDhananjay Phadke
o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14netxen: fix endianness in firmware commandsDhananjay Phadke
o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14sis900: generate fake MAC address if the hardware doesn't have oneDaniele Venzano
The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14powerpc/fs_enet: Add missing irq free in error path.Mike Ditto
If something goes wrong attaching to phy driver, we weren't freeing the IRQ. Signed-off-by: Mike Ditto <mditto@consentry.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gso: Ensure that the packet is long enoughHerbert Xu
When we get a GSO packet from an untrusted source, we need to ensure that it is sufficiently long so that we don't end up crashing. Based on discovery and patch by Ian Campbell. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Fix page ref count for skbs freed normallyHerbert Xu
When an skb with page frags is merged into an existing one, we cannibalise its reference count. This is OK when the skb is reused because we set nr_frags to zero in that case. However, for the case where the skb is freed through kfree_skb, we didn't clear nr_frags which causes the page to be freed prematurely. This is fixed by moving the skb resetting into skb_gro_receive. Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14xfrm: For 32/64 compatability wrt. xfrm_usersa_infoDavid S. Miller
Reported by Jiri Klimes. Fix suggested by Patrick McHardy. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14i4l: minor cleanupsPaul Bolle
Minor cleanups, either made possible or obvious after commit d700555 (I4l: convert to net_device_ops). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14i4l: do not print a warning when shutting down an i4l ppp interfacePaul Bolle
When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a scary warning is logged: isdn_free_channel: called with invalid drv(-1) or channel(-1) This warning is caused by isdn_net_unbind_channel(), which always calls isdn_free_channel() even if isdn_net_local->isdn_device and isdn_net_local->isdn_channel are (still) in a perfectly acceptable default state, so let's not do that. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14phylib: Fix Freescale TBI PHY detectionAnton Vorontsov
Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14gro: Check for GSO packets and packets with frag_listHerbert Xu
As GRO cannot be applied to packets with frag_list we need to make sure that we reject such packets if they are fed to us, e.g., through a tunnel device. Also there is no point in applying GRO on GSO packets so they too should be rejected. This allows GRO to be used in virtio-net which may produce GSO packets directly but may still benefit from GRO if the other end of it doesn't support GSO. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-14ARM etherh: Fix build failure.David S. Miller
Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13ipv6: Fix fib6_dump_table walker leakHerbert Xu
When a fib6 table dump is prematurely ended, we won't unlink its walker from the list. This causes all sorts of grief for other users of the list later. Reported-by: Chris Caputo <ccaputo@alt.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13tcp: splice as many packets as possible at onceWilly Tarreau
As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not optimal. It processes at most one segment per call. This results in low performance and very high overhead due to syscall rate when splicing from interfaces which do not support LRO. Willy provided a patch inside tcp_splice_read(), but a better fix is to let tcp_read_sock() process as many segments as possible, so that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less often. With this change, splice() behaves like tcp_recvmsg(), being able to consume many skbs in one system call. With typical 1460 bytes of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return 16*1460 = 23360 bytes. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-01-13p54: fix "‘ret’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 06:42:02 +0000