summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]
2011-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) MAINTAINERS: Add Andy Gospodarek as co-maintainer. r8169: disable ASPM RxRPC: Fix v1 keys AF_RXRPC: Handle receiving ACKALL packets cnic: Fix lost interrupt on bnx2x cnic: Prevent status block race conditions with hardware net: dcbnl: check correct ops in dcbnl_ieee_set() e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead igb: fix sparse warning e1000: fix sparse warning netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values dccp: fix oops on Reset after close ipvs: fix dst_lock locking on dest update davinci_emac: Add Carrier Link OK check in Davinci RX Handler bnx2x: update driver version to 1.62.00-6 bnx2x: properly calculate lro_mss bnx2x: perform statistics "action" before state transition. bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode). bnx2x: Fix ethtool -t link test for MF (non-pmf) devices. bnx2x: Fix nvram test for single port devices. ...
2011-03-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill loop_mutex blktrace: Remove blk_fill_rwbs_rq. block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue() block: add @force_kblockd to __blk_run_queue() block: fix kernel-doc format for blkdev_issue_zeroout blk-throttle: Do not use kblockd workqueue for throtl work
2011-03-03Merge branch 'i_nlink' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'i_nlink' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: hfs: fix rename() over non-empty directory udf: fix i_nlink limit fix reiserfs mkdir() breakage exofs: i_nlink races in rename() nilfs2: i_nlink races in rename() minix: i_nlink races in rename() ufs: i_nlink races in rename() sysv: i_nlink races in rename()
2011-03-04DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]David Howells
When a DNS resolver key is instantiated with an error indication, attempts to read that key will result in an oops because user_read() is expecting there to be a payload - and there isn't one [CVE-2011-1076]. Give the DNS resolver key its own read handler that returns the error cached in key->type_data.x[0] as an error rather than crashing. Also make the kenter() at the beginning of dns_resolver_instantiate() limit the amount of data it prints, since the data is not necessarily NUL-terminated. The buggy code was added in: commit 4a2d789267e00b5a1175ecd2ddefcc78b83fbf09 Author: Wang Lei <wang840925@gmail.com> Date: Wed Aug 11 09:37:58 2010 +0100 Subject: DNS: If the DNS server returns an error, allow that to be cached [ver #2] This can trivially be reproduced by any user with the following program compiled with -lkeyutils: #include <stdlib.h> #include <keyutils.h> #include <err.h> static char payload[] = "#dnserror=6"; int main() { key_serial_t key; key = add_key("dns_resolver", "a", payload, sizeof(payload), KEY_SPEC_SESSION_KEYRING); if (key == -1) err(1, "add_key"); if (keyctl_read(key, NULL, 0) == -1) err(1, "read_key"); return 0; } What should happen is that keyctl_read() reports error 6 (ENXIO) to the user: dns-break: read_key: No such device or address but instead the kernel oopses. This cannot be reproduced with the 'keyutils add' or 'keyutils padd' commands as both of those cut the data down below the NUL termination that must be included in the data. Without this dns_resolver_instantiate() will return -EINVAL and the key will not be instantiated such that it can be read. The oops looks like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff811b99f7>] user_read+0x4f/0x8f PGD 3bdf8067 PUD 385b9067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/irq CPU 0 Modules linked in: Pid: 2150, comm: dns-break Not tainted 2.6.38-rc7-cachefs+ #468 /DG965RY RIP: 0010:[<ffffffff811b99f7>] [<ffffffff811b99f7>] user_read+0x4f/0x8f RSP: 0018:ffff88003bf47f08 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88003b5ea378 RCX: ffffffff81972368 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003b5ea378 RBP: ffff88003bf47f28 R08: ffff88003be56620 R09: 0000000000000000 R10: 0000000000000395 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffffffffa1 FS: 00007feab5751700(0000) GS:ffff88003e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000003de40000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process dns-break (pid: 2150, threadinfo ffff88003bf46000, task ffff88003be56090) Stack: ffff88003b5ea378 ffff88003b5ea3a0 0000000000000000 0000000000000000 ffff88003bf47f68 ffffffff811b708e ffff88003c442bc8 0000000000000000 00000000004005a0 00007fffba368060 0000000000000000 0000000000000000 Call Trace: [<ffffffff811b708e>] keyctl_read_key+0xac/0xcf [<ffffffff811b7c07>] sys_keyctl+0x75/0xb6 [<ffffffff81001f7b>] system_call_fastpath+0x16/0x1b Code: 75 1f 48 83 7b 28 00 75 18 c6 05 58 2b fb 00 01 be bb 00 00 00 48 c7 c7 76 1c 75 81 e8 13 c2 e9 ff 4c 8b b3 e0 00 00 00 4d 85 ed <41> 0f b7 5e 10 74 2d 4d 85 e4 74 28 e8 98 79 ee ff 49 39 dd 48 RIP [<ffffffff811b99f7>] user_read+0x4f/0x8f RSP <ffff88003bf47f08> CR2: 0000000000000010 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> cc: Wang Lei <wang840925@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-03-03netlink: kill eff_cap from struct netlink_skb_parmsPatrick McHardy
Netlink message processing in the kernel is synchronous these days, capabilities can be checked directly in security_netlink_recv() from the current process. Signed-off-by: Patrick McHardy <kaber@trash.net> Reviewed-by: James Morris <jmorris@namei.org> [chrisw: update to include pohmelfs and uvesafb] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03eql: Convert printks to pr_<level> and netdev_<level>Joe Perches
Add pr_fmt. Removed trailing "\n" from version, add back via pr_info("%s\n", version); Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03MAINTAINERS: Add Andy Gospodarek as co-maintainer.Jay Vosburgh
Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03mii: Convert printks to netdev_infoJoe Perches
Add a bit more data to the output. Convert string speeds to integer. Object size reduced a tiny bit. $ size drivers/net/mii.o* text data bss dec hex filename 4155 56 1000 5211 145b drivers/net/mii.o.new 4184 56 1000 5240 1478 drivers/net/mii.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03mv643xx_eth: Use netdev_<level> and pr_<level>Joe Perches
Use the current logging styles. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03tlan: Use pr_fmt, pr_<level> and netdev_<level>Joe Perches
Neatening and standardization to the current logging mechanisms. Miscellaneous speen/speed typo correction. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03tlan: Remove changelogJoe Perches
As it isn't necessary nor really useful any longer. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03benet: use GFP_KERNEL allocations when possibleEric Dumazet
Extend be_alloc_pages() with a gfp parameter, so that we use GFP_KERNEL allocations instead of GFP_ATOMIC when not running in softirq context. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: zero proper structure size for geometry calls
2011-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix regression that i-flag is not set on changeless checkpoints
2011-03-03tun: Convert logging messages to pr_<level> and tun_debugJoe Perches
Use the current logging forms with pr_fmt. Convert DBG macro to tun_debug, use netdev_printk as well. Add printf verification when TUN_DEBUG not defined. Miscellaneous comment typo fix. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03net: add Faraday FTMAC100 10/100 Ethernet driverPo-Yu Chuang
FTMAC100 Ethernet Media Access Controller supports 10/100 Mbps and MII. This driver has been working on some ARM/NDS32 SoC's including Faraday A320 and Andes AG101. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03ipv6: Use ERR_CAST in addrconf_dst_alloc.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03r8169: disable ASPMStanislaw Gruszka
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-03-03ipv4: Fix __ip_dev_find() to use ifa_local instead of ifa_address.David S. Miller
Reported-by: Stephen Hemminger <shemminger@vyatta.com> Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03net_sched: reduce fifo qdisc sizeEric Dumazet
Because of various alignements [SLUB / qdisc], we use 512 bytes of memory for one {p|b}fifo qdisc, instead of 256 bytes on 64bit arches and 192 bytes on 32bit ones. Move the "u32 limit" inside "struct Qdisc" (no impact on other qdiscs) Change qdisc_alloc(), first trying a regular allocation before an oversized one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parmsPatrick McHardy
Netlink message processing in the kernel is synchronous these days, the session information can be collected when needed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03ipv4: Fix crash in dst_release when udp_sendmsg route lookup fails.David S. Miller
As reported by Eric: [11483.697233] IP: [<c12b0638>] dst_release+0x18/0x60 ... [11483.697741] Call Trace: [11483.697764] [<c12fc9d2>] udp_sendmsg+0x282/0x6e0 [11483.697790] [<c12a1c01>] ? memcpy_toiovec+0x51/0x70 [11483.697818] [<c12dbd90>] ? ip_generic_getfrag+0x0/0xb0 The pointer passed to dst_release() is -EINVAL, that's because we leave an error pointer in the local variable "rt" by accident. NULL it out to fix the bug. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03block: kill loop_mutexPetr Uzel
Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [<c102ec04>] irq_exit+0x36/0x59 [<c101502c>] smp_apic_timer_interrupt+0x6b/0x75 [<c127f639>] apic_timer_interrupt+0x31/0x38 [<c101df88>] mutex_spin_on_owner+0x54/0x5b [<fe2250e9>] lo_release+0x12/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a4da5>] fput+0xd5/0x1aa [<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop] [<fe225110>] lo_release+0x39/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a59d9>] deactivate_locked_super+0x17/0x36 [<c10b6f37>] sys_umount+0x27e/0x2a5 [<c10b6f69>] sys_oldumount+0xb/0xe [<c1002897>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan <knikanth@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03blktrace: Remove blk_fill_rwbs_rq.Tao Ma
If we enable trace events to trace block actions, We use blk_fill_rwbs_rq to analyze the corresponding actions in request's cmd_flags, but we only choose the minor 2 bits from it, so most of other flags(e.g, REQ_SYNC) are missing. For example, with a sync write we get: write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + = 8 [write_test] Since now we have integrated the flags of both bio and request, it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and blk_fill_rwbs_rq isn't needed any more. With this patch, after a sync write we get: write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 += 8 [write_test] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-03ixgbe: cleanup copyright string for 2011Don Skidmore
Updating the copyrights for 2011 as well as make the ixgbe_copyright string a constant. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: add function pointer for semaphore functionDon Skidmore
The X540 devices grabs semaphores differently than 82599 and 82598 devices do. They do however also grab them in allot of the same functions. So I'm adding a new MAC operation function pointer to allow us to use the correct function based on our MAC type. I'm also changing all the semaphore calls to use this new function pointer. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: X540 CleanupGreg Rose
Clean up commented out include file and use #define instead of hard coded value for number of RAR entries. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup handling of I2C interface to PHYEmil Tantilov
The I2C interface was not being correctly locked down per port. As such this can lead to race conditions that can cause issues. This patch cleans up the handling to make certain we are not experiencing racy I2C access. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: store permanent address before initializing Rx addressesEmil Tantilov
We were reading the address after it had been initialized and this results in the permanent address on the system being changed. This change corrects that by storing the address before we re-initialize it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Numerous whitespace / formatting cleanupsEmil Tantilov
This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Specific check for 100 Full link speedEmil Tantilov
This patch specifically checks for 100 Full link speed instead of assuming we are linked at 100 if not linked at 10G and 1G. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Drop unused code for setting up unicast addressesEmil Tantilov
This change removes the unused code that was setting up the uc_addr_list. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: rework ixgbe MTA handling to not drop packetsEmil Tantilov
This change modifies the ixgbe drivers so that it will not drop the multicast filters while updating them. Instead it uses an intermediate table to store the filter and then writes that filter to the hardware. Based on original patch from Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reported-by: Dave Boutcher <daveboutcher@gmail.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup X540 PHY reset function pointerDon Skidmore
The X540 PHY reset pointer isn't currently used which is a good thing as it wouldn't work as implemented. On top of that the X540 firmware is written with the assumption that is does not need to be reset for proper initialization so it's not needed. I'm just assigning the pointer at NULL as the current implementation is rather misleading. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Bounds checking for set_rar, clear_rar, set_vmdq, clear_vmdqEmil Tantilov
This change makes it so that out of bounds requests to these calls will now return IXGBE_ERR_INVALID_ARGUMENT instead of returning 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Fill out PCIe speed and width enums with valuesEmil Tantilov
This patch fills in the values for bus speed and width of the ixgbe_bus_speed and ixgbe_bus_width enums. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: add polling test to end of PHY resetEmil Tantilov
Some PHYs require that we poll the reset bit and wait for it to clear before continuing initialization. As such we should add this check to the end of the ixgbe_reset_phy_generic routine. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Check link wants report current link stateEmil Tantilov
Currently check link reports the link state as down, if at any time the link had previously gone down since the last time the LINKS register was read. This does not accurately reflect the function of the check link call, which should be to return the CURRENT link state. Code now reads the LINKS registers twice, once to clear the previous and again to get the current value. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup code in ixgbe_identify_sfp_module_genericEmil Tantilov
This change cleans up several issues in ixgbe_identify_sfp_module_generic including whitespace, redundant code, I2C EEPROM reads without exception handling, and an if/elseif/else without braces. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: Add ability to double reset on failure to clear master enableEmil Tantilov
Double resets are required for recovery from certain error conditions. Between resets, it is necessary to stall to allow time for any pending HW events to complete. We use 1usec since that is what is needed for ixgbe_disable_pcie_master(). The second reset then clears out any effects of those events. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: set media type for 82599 T3 LOMEmil Tantilov
The media type was not being set for the 82599 T3 LAN on motherboard. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: balance free_irq calls with request_irq callsAlexander Duyck
We were incorrectly freeing IRQs that we had not requested. This change corrects that by making certain we only free q_vectors that we have requested IRQs for. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup logic related to HW semaphoresEmil Tantilov
This change cleans up much of the logic related to the hardware semaphores on the adapters. There were a number of issues with timings that needed to be addressed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbe: cleanup wake on LAN definesEmil Tantilov
This change just cleans up a few defines in ixgbe_type.h related to wake on LAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03ixgbevf: Fix Compiler WarningsGreg Rose
Fix Compiler warnings of variables that are initialized but not used. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix strncpy calls to be safe per source code review toolsCarolyn Wyborny
This fix changes the remaining calls to strncpy that have not yet been changed to use the "sizeof(buf) - 1" syntax rather than just a number for buffer size. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-03igb: Fix reg pattern test in ethtool for i350 devicesCarolyn Wyborny
This fixes the reg_pattern_test so that the test does not fail on i350 parts. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-12 18:35:49 +0000