summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2005-09-12[ALSA] pcm-oss - Add bugg-yptr optionTakashi Iwai
Documentation,ALSA<-OSS emulation Added 'buggy-ptr' proc option to switch the behavior of GETOPTR ioctl. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] powermac - Add AUTO_DRC configTakashi Iwai
PPC,PPC Tumbler driver Added AUTO_DRC kernel config to enable/disable the auto-DRC-toggle feature on tumbler/snapper. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hda-intel - Fix modem PCM creationTakashi Iwai
HDA Intel driver Fix a bug of modem PCM creation (due to a typo). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] pci_find_device removeJiri Slaby
Memalloc module,CS46xx driver,VIA82xx driver,ALI5451 driver au88x0 driver Replace pci_find_device() with pci_get_device() and pci_dev_put(). Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Remove superfluous PCI ID definitionsTakashi Iwai
CS46xx driver,EMU10K1/EMU10K2 driver,PCM Midlevel,Trident driver YMFPCI driver,BT87x driver,CMIPCI driver,CS4281 driver ENS1370/1+ driver,ES1938 driver,ES1968 driver,Intel8x0 driver Intel8x0-modem driver,Maestro3 driver,RME32 driver,RME96 driver SonicVibes driver,VIA82xx driver,ALI5451 driver,ICE1712 driver ICE1724 driver,NM256 driver,RME HDSP driver,RME9652 driver Remove superfluous PCI ID definitions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Fix DocBook warningsTakashi Iwai
PCM Midlevel,RawMidi Midlevel Fix DocBook warnings. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hda-codec - Assign audio PCMS firstTakashi Iwai
HDA Codec driver,HDA Intel driver,HDA generic driver Assign audio PCMs first before modem PCMs. The modem stream is assigned up to device #6, to be consistent over different models. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Correct detection of iBook G4 1420Mhz soundcardVincent Pelletier
PPC PMAC driver Here is a patch to correct detection of the soundcard on my iBook model (bought really recently). Without that fix, there were only andui in the headphone, and the mixer was totaly non functional. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] rtctimer: add option to make RTC timer the default sequencer timerClemens Ladisch
ALSA Core,ALSA sequencer Add an option to make the RTC timer the default sequencer timer. This becomes necessary for precise MIDI timing when the system timer runs at less than 1000 Hz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] Add snd_card_set_generic_dev() call to ISA driversTakashi Iwai
ISA,CMI8330 driver,ES18xx driver,OPL3SA2 driver,Sound Galaxy driver Sound Scape driver,AD1848 driver,CS4231 driver,CS4236+ driver ES1688 driver,GUS Classic driver,GUS Extreme driver,GUS MAX driver AMD InterWave driver,Opti9xx drivers,SB16/AWE driver,SB8 driver Wavefront drivers - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Add snd_card_set_generic_dev() callTakashi Iwai
ARM,SA11xx UDA1341 driver,Generic drivers,MPU401 UART,MIPS MIPS AU1x00 driver,PPC,PPC PowerMac driver,SPARC,SPARC AMD7930 driver SPARC cs4231 driver,SPARC DBRI driver - Added snd_card_set_generic_dev() call. - Added SND_GENERIC_DRIVER to Kconfig. - Clean up the error path in probe if necessary. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Introduce snd_card_set_generic_dev()Takashi Iwai
ALSA Core A new function snd_card_set_generic_dev() is introduced to add the 'generic device' support for devices without proper bus on sysfs. It's a last resort, and should be removed in future when they have a proper bus, instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Update/fix ALSA documentTakashi Iwai
Documentation Update/fix ALSA document. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hda-intel - Check validity of DMA positionTakashi Iwai
HDA Intel driver Check the validity of the current DMA position when position_fix=0 (auto) is set. If the DMA position overcomes the threshold, the driver changes the fix behavior automatically to use POSBUF. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] Add snd_card_set_dev()Takashi Iwai
ARM AACI PL041 driver,PARISC Harmony driver Added snd_card_set_dev() calls to register the device pointer for the card. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hda-codec - Bring the Vaio's RA826G HDA (82801) to life ...Davide Libenzi
HDA Codec driver Add the subsystem PCI devid to the list (on top of 2.6.13). Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] opti93x: optimize a register accessClemens Ladisch
Opti9xx drivers When clearing some bits in a register, don't bother with the bits that won't be changed anyway. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] sparse address space annotationsClemens Ladisch
ALSA Core,RawMidi Midlevel,ALSA<-OSS emulation,ALSA sequencer RME32 driver,RME96 driver,EMU10K1/EMU10K2 driver,NM256 driver Add sparse annotations where we do strange this with __iomem/__user pointers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] usb-audio: add SNDRV_PCM_INFO_BATCH flagClemens Ladisch
USB generic driver Add the SNDRV_PCM_INFO_BATCH flag to the PCM hardware information to indicate that the driver uses double buffering. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] snd-ca0106, snd-emu10k1: Add symlink in the sys tree.James Courtier-Dutton
CA0106 driver,EMU10K1/EMU10K2 driver A thread appeared on the LKML. This patch implements the fix. Question: in sysfs, /sys/bus/*/drivers lists the driver names, with their exported .name (eg. '.name = 'EMU10K1_Audigy'' in the module code, from now on 'driver name'). In /sys/modules, the kernel modules are listed with their module name, eg. snd_emu10k1. However, it seems to me that in sysfs, there is no way in particular to tell, which module has which .name. That is, that snd_emu10k1 is EMU10K1_Audigy and vice versa. I wonder whether it wouldn't be possible to add a symlink to the particular module from the driver, and/or from the module to the driver, so the list of devices handled by the module and the module name would be accessible. This way, I would know which driver name corresponds to which module name and vice versa. Answer: For PCI drivers, just add the line: .owner = THIS_MODULE, to their struct pci_driver definition and you will get the symlink created for you. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-09-12[ALSA] Fix ALC658D supportTakashi Iwai
AC97 Codec Fix the internal speaker problem (e.g. Targa Traveller 826) with ALC658D codec. The info is taken from Cyberlink/realtek-modified code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] hdsp: always initialize card nameClemens Ladisch
RME HDSP driver When using the kernel firmware loader, initialize the card shortname before registering the card with ALSA to prevent it from using a default card ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] ad1889: add AD1889 driver docsClemens Ladisch
Documentation move the AD1889 driver docs to the kernel tree, too Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] intel8x0 - Add quirk for IBM NetVisa A30pTakashi Iwai
Intel8x0 driver Added ac97_quirk entry for IBM NetVisa A30p. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] atiixp - Fix PM resumeTakashi Iwai
ATIIXP driver Fixed PM resume on atiixp driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] ad1889: add AD1889 driverClemens Ladisch
PCI drivers,AD1889 driver move the AD1889 driver to the kernel tree Acked-by: Thibaut Varene <varenet@parisc-linux.org> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-09-12[ALSA] Fix EAPD for MSI S270Takashi Iwai
AC97 Codec Fix pin47 setting for EAPD control on MSI S270 laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-09-12[ALSA] snd-ca0106: Tidy up volume controlsJames Courtier-Dutton
CA0106 driver Playback volume controls were appearing in both the playback and capture displays of alsamixer. Now those playback controls only appear in the playback display. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
2005-09-11Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-09-11Pull sn-features into release branchTony Luck
2005-09-11Pull sim-fixes into release branchTony Luck
2005-09-11[IA64] MCA/INIT: remove obsolete unwind codeKeith Owens
Delete the special case unwind code that was only used by the old MCA/INIT handler. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[IA64] MCA/INIT: remove the physical mode path from minstate.hKeith Owens
Remove the physical mode path from minstate.h. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[PATCH] MCA/INIT: use per cpu stacksKeith Owens
The bulk of the change. Use per cpu MCA/INIT stacks. Change the SAL to OS state (sos) to be per process. Do all the assembler work on the MCA/INIT stacks, leaving the original stack alone. Pass per cpu state data to the C handlers for MCA and INIT, which also means changing the mca_drv interfaces slightly. Lots of verification on whether the original stack is usable before converting it to a sleeping process. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[IA64] MCA/INIT: avoid reading INIT record during INIT eventKeith Owens
Reading the INIT record from SAL during the INIT event has proved to be unreliable, and a source of hangs during INIT processing. The new MCA/INIT handlers remove the need to get the INIT record from SAL. Change salinfo.c so mca.c can just flag that a new record is available, without having to read the record during INIT processing. This patch can be applied without the new MCA/INIT handlers. Also clean up some usage of NR_CPUS which should have been using cpu_online(). Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[IA64] MCA/INIT: add an extra thread_info flagKeith Owens
Add an extra thread_info flag to indicate the special MCA/INIT stacks. Mainly for debuggers. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11[PATCH] MCA/INIT: scheduler hooksKeith Owens
Scheduler hooks to see/change which process is deemed to be on a cpu. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11mips: rename offsets.c to asm-offsets.cSam Ravnborg
Cannot build MIPS now. We need to change offset.c to asm-offsets.c Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-11kbuild: fix silentoldconfig with make O=Sam Ravnborg
Al Viro reported that sometimes silentoldconfig failed because output directory was missing. So create it unconditionally before executing conf Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-11kbuild: rename prepare to archprepare to fix dependency chainSam Ravnborg
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare The dependency chain looks like this now: prepare | +--> prepare0 | +--> archprepare | +--> scripts_basic +--> prepare1 | +---> prepare2 | +--> prepare3 So prepare 3 is processed before prepare2 etc. This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed. prepare0 which build the asm-offsets.h file will need the actions performed by archprepare. The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-11Merge master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband Linus Torvalds
2005-09-11Merge branch 'for-linus' from kernel.org:/.../shaggy/jfs-2.6 manuallyLinus Torvalds
Clash due to new delete_inode behavior (the filesystem now needs to do the truncate_inode_pages() call itself). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] Sun HME: enable and map PCI ROM properlyWilly Tarreau
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11Sun GEM ethernet: enable and map PCI ROM properlyLinus Torvalds
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11hpt366: write the full 4 bytes of ROM address, not just low 1 byteLinus Torvalds
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using. "Lost and wandering in the desert of confusion" Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11Merge master.kernel.org:/home/rmk/linux-2.6-mmc Linus Torvalds
2005-09-11[MFD] Cleanups suggested by Dmitri, Vojtech and lists.Pavel Machek
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri and the lists. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 assabet platform supportRussell King
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 touchscreen supportRussell King
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 device supportRussell King
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 22:00:31 +0000