summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-02-01au1xxx-ide: use hwif->devBartlomiej Zolnierkiewicz
* Setup hwif->dev in au_ide_probe(). * Use hwif->dev instead of ahwif->dev in auide_build_sglist(), auide_build_dmatable(), auide_dma_end() and auide_ddma_init(). * Remove no longer needed 'dev' field from _auide_hwif type. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz
Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: use ide_destroy_dmatable() instead of pci_unmap_sg() (take 2)Bartlomiej Zolnierkiewicz
Use ide_destroy_dmatable() in: * ide-dma.c::ide_build_dmatable() * sgiioc4.c::sgiioc4_build_dma_table() * pmac.c::pmac_ide_{build,destroy}_dmatable() There should be no functionality changes caused by this patch. v2: * pmac.c build fix from Andrew Morton. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: remove BUG_ON() from ide_build_sglist()Bartlomiej Zolnierkiewicz
do_rw_taskfile() has been fixed to check the return value of ->dma_setup method so this BUG_ON() is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: fix ide_intr() for non-PCI devices and CONFIG_BLK_DEV_IDEPCI=yBartlomiej Zolnierkiewicz
'hwif->pci_dev && !hwif->pci_dev->vendor' condition is never true, check for 'hwif->chipset != ide_pci' instead. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01piix: remove stale commentsBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_NO_DSC host flagBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap. * Set it in aec62xx (for ATP850UF only) and hpt34x host drivers. * Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add IDE_HFLAG_CLEAR_SIMPLEX host flagBartlomiej Zolnierkiewicz
* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base(). * Factor out code for forcing host out of "simplex" mode from ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper. * Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229), amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and serverworks (for CSB5) host drivers. * Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag instead of checking dev->device (BTW the code was buggy because it didn't check for dev->vendor, luckily none of these PCI Device IDs was used by some other vendor for PCI IDE controller). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01amd74xx: remove amd_ide_chips tableBartlomiej Zolnierkiewicz
* Remove no longer needed assertion from amd74xx_probe(). * Factor out cable detection for AMD7409 to amd7409_cable_detect() and for chipsets >= AMD7411 to amd7411_cable_detect(). * Use dev->vendor and dev->device instead of amd_config->udma_mask when selecting cable detection method and checking for broken FIFO support in init_chipset_amd74xx(). * Remove no longer needed AMD_BAD_FIFO define. * Add 'swdma' parameter for setting .swdma_mask to DECLARE_AMD_DEV() macro. * Add 'udma' parameter for setting .udma_mask to DECLARE_{AMD,NV}_DEV() macro. * Keep a copy of a current amd74xx_chipsets[] entry in amd74xx_probe() in order to fix ->swdma_mask on early AMD7409 revisions and ->udma_mask on Serenade mainboards. * Remove no longer needed fixups from init_chipset_amd74xx() and AMD_CHECK_{SWDMA,SERENADE} defines. * Move printing banner message from init_chipset_amd74xx() to amd74xx_probe(), also remove incorrect comment while at it. * Use hwif->ultra_mask instead of amd_config->udma_mask in amd_set_drive(). * Add 'udma_mask' argument to amd_set_speed() and pass UDMA mask from amd_set_drive() instead of using amd_config->udma_mask. * Move amd_config->base from AMD_* defines to users of these defines and add 0x40 the defined values. Then add amd_offset() inline helper for selecting offset from 0x40 base (needed for nVidia controllers) and finally use it in amd_set_speed(), amd7411_cable_detect() and init_chipset_amd74xx() instead of amd_config->base. * Remove no longer needed AMD_BAD_SWDMA define, ->{swdma,ultra}_mask setup from init_hwif_amd74xx(), amd_{config,chipset} variables and amd_ide_chips table. * Fix init_chipset_amd74xx() comment. * Bump driver version. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: ide_setup_dma() assumes 8 portsSergei Shtylyov
According to http://marc.info/?l=linux-ide&m=114346138611631, the drivers must always register 8 DMA ports with ide_setup_dma(), so its last argument is not needed. While at it, kill some useless parens in that function... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01trm290: cannot call ide_setup_dma()Sergei Shtylyov
The TRM-290 chip is *not* SFF-8038i compatible and therefore can *not* call ide_setup_dma() -- fix this and also cleanup the code a bit... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move the remaining cdrom.c ioctl handling code to ide-cd_ioctl.cBorislav Petkov
There should be no functional changes from this. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-{floppy,tape}: remove debug code for dumping identify dataBartlomiej Zolnierkiewicz
IDE core supports dumping raw identify data in hdparm friendly format now so verbose identify dumping in ide-{floppy,tape}.c device drivers (done iff IDE{FLOPPY,TAPE}_DEBUG_INFO is defined to '1' and it is '0' by default) is no longer nedeed. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: add ide_dump_identify() debug helperBartlomiej Zolnierkiewicz
* Add ide_dump_identify() debug helper for dumping raw identify data in the hdparm friendly format (== the identify data can be extracted from dmesg output and passed to hdparm --Istdin). * Dump identify data in ide-probe.c::do_identify() if DEBUG is enabled. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: update driver version, comments and copyrightsBartlomiej Zolnierkiewicz
* Bump driver version. * Remove filename and stale TODO from comments. * Add my copyrights. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify request end exit path in cdrom_decode_status()Bartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_write_check_ireason() and cdrom_read_check_ireason()Bartlomiej Zolnierkiewicz
Add 'rw' parameter to cdrom_read_check_ireason(), make it handle both read and write checking, rename it to ide_cd_check_ireason(), finally remove no longer needed cdrom_write_check_ireason(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_rw_intr() and cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Add handling of fs read/write requests to cdrom_nepwc_intr() and remove no longer needed cdrom_rw_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_rw_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: prepare cdrom_rw_intr() and cdrom_newpc_intr() to be mergedBartlomiej Zolnierkiewicz
In cdrom_newpc_intr(): * cleanup variables in the 'transfer data' loop In cdrom_rw_intr(): * rename 'sectors_to_transfer' to 'thislen' * rename 'this_transfer' to 'blen' * keep number of bytes (instead of sectors) in 'thislen' and 'blen' * call 'xferfunc' only once for 'blen' * cache 'rq->buffer' in 'ptr' variable * check for 'rq->bio' before setting 'ptr' and 'blen' * check for 'ptr' instead of 'rq->current_nr_sectors' There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify moving to the next buffer in cdrom_rw_intr()Bartlomiej Zolnierkiewicz
Use the fact that for the first loop rq->current_nr_sectors is always set and unify moving to the next buffer for read/write requests. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_start_read() and cdrom_start_write()Bartlomiej Zolnierkiewicz
Add handling of read requests to cdrom_start_write(), rename it to cdrom_start_rw() and remove no longer needed cdrom_start_read(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_start_read_continuation() and cdrom_start_rw_cont()Bartlomiej Zolnierkiewicz
* Add handling of write requests to cdrom_start_read_continuation(), rename it to cdrom_start_rw_cont() and remove no longer needed cdrom_start_write_cont(). * Remove redundant '(rq->sector & (sectors_per_frame - 1)' check. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_read_intr() and cdrom_write_intr()Bartlomiej Zolnierkiewicz
Add handling of read requests to cdrom_write_intr(), rename it to cdrom_rw_intr() and remove no longer needed cdrom_read_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out transfer size checking from cdrom_read_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_read_intr() and cdrom_write_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: add ide_cd_drain_data() helperBartlomiej Zolnierkiewicz
Add ide_cd_drain_data() and use it in cdrom_{buffer_sectors,read_intr}() (as a nice side-effect this cuts 0.5kB of code from ide-cd.o). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_do_packet_command() and cdrom_do_block_pc()Bartlomiej Zolnierkiewicz
Add REQ_TYPE_{SENSE,ATA_PC} requests handling to cdrom_do_block_pc() and remove cdrom_do_packet_command(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove cdrom_do_pc_continuation()Bartlomiej Zolnierkiewicz
cdrom_do_pc_continuation() is now identical to cdrom_do_newpc_cont() so just always use the latter function. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_pc_intr() and cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Add handling of REQ_TYPE_{SENSE,ATA_PC} requests to cdrom_newpc_intr() (please note that these requests never have 'bio' attached to them and they never use DMA), then remove no longer needed cdrom_pc_intr(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: unify request end exit path in cdrom_pc_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out request sense fixup from cdrom_pc_intr()Bartlomiej Zolnierkiewicz
This is a preparation for cdrom_pc_intr() and cdrom_newpc_intr() merge. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: call blk_dump_rq_flags() on "missing data" in cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove BUG_ON() from cdrom_newpc_intr()Bartlomiej Zolnierkiewicz
There is no need for it anylonger and ide_set_handler() complains if ->handler is not NULL anyway. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.cBartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: rename cdrom_* functions to ide_cd_*Bartlomiej Zolnierkiewicz
* cdrom_prepare_request() -> ide_cd_init_rq() * cdrom_queue_packet_command() -> ide_cd_queue_pc() * cdrom_lockdoor() -> ide_cd_lockdoor() * cdrom_read_toc() -> ide_cd_read_toc() * cdrom_get_toc_entry() -> ide_cd_get_toc_entry() This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: coding style fixes for cdrom_get_toc_entry()Bartlomiej Zolnierkiewicz
This is a preparation to move code handling cdrom.c IOCTLs out of ide-cd.c. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move lba_to_msf() and msf_to_lba() to <linux/cdrom.h>Bartlomiej Zolnierkiewicz
* Move lba_to_msf() and msf_to_lba() to <linux/cdrom.h> (use 'u8' type instead of 'byte' while at it). * Remove msf_to_lba() copy from drivers/cdrom/cdrom.c. Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_select_speed() into ide_cdrom_select_speed()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_read_subchannel() into ide_cdrom_get_mcn()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: merge cdrom_play_audio() into ide_cd_fake_play_trkind()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: factor out ioctl handlers from ide_cdrom_audio_ioctl()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.cBartlomiej Zolnierkiewicz
* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out from ide-cd.[c,h]. Add MODULE_ALIAS("ide-cd") to preserve compatibility. * Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c. ide-cd_verbose.c is IDE subsystem independent and may be easily converted into generic library usable by other drivers (i.e. libata) if needed. * Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig replacing VERBOSE_IDE_CD_ERRORS define. Make this config option enabled by default and visible only if CONFIG_EMBEDDED is defined. before the patch: text data bss dec hex filename 22841 360 1056 24257 5ec1 drivers/ide/ide-cd.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y: text data bss dec hex filename 22857 360 1056 24273 5ed1 drivers/ide/ide-cd_mod.o after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n: text data bss dec hex filename 15091 360 1056 16507 407b drivers/ide/ide-cd_mod.o Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: coding style fixes for VERBOSE_IDE_CD_ERRORS codeBartlomiej Zolnierkiewicz
* Coding style fixes for VERBOSE_IDE_CD_ERRORS code. * Add KERN_{ERR,CONT} printk() levels where needed. This is a preparation for moving this code out of ide-cd.[c,h]. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove duplicate sense keys definitions from ide-cd.hBartlomiej Zolnierkiewicz
ide-cd.c already uses sense keys definitions from <scsi/scsi.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: re-organize handling of quirky devicesBartlomiej Zolnierkiewicz
Re-organize handling of quirky devices: * Add struct cd_list_entry, ide_cd_quirks_list[] and ide_cd_flags() helper. * Set flags returned by ide_cd_flags() in ide_cdrom_setup(). * Add IDE_CD_FLAG_VERTOS_{300_SDD,600_ESD} and IDE_CD_FLAG_SANYO_3CD flags. * Move device quirks from ide_cdrom_setup() to ide_cd_quirks_list[]. * Rename IDE_CD_FLAG_NEC260 to IDE_CD_FLAG_PRE_ATAPI12 and handle quirky Stingray 8X CD-ROM using ide_cd_quirks_list[]. * Add IDE_CD_FLAG_FULL_CAPS_PAGE flag and handle quirky ACER 50X CD-ROM / WPI 32X CD-ROM using ide_cd_quirk_list[]. * Add IDE_CD_FLAG_PLAY_AUDIO_OK flag and handle quirky MATSHITA DVD-ROMs using ide_cd_quirks_list[]. * Add IDE_CD_FLAG_LE_SPEED_FIELDS flag and handle quirky ACER/AOpen 24X CD-ROM using ide_cd_quirk_list[]. * Fix some comments about quirky devices while at it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: use BCD2BIN()/BIN2BCD() macros from <linux/bcd.h>Bartlomiej Zolnierkiewicz
Use BCD2BIN()/BIN2BCD() macros from <linux/bcd.h> and remove the local bcd2bin()/bin2bcd() inlines. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove STANDARD_ATAPI defineBartlomiej Zolnierkiewicz
Remove STANDARD_ATAPI define + drive-by coding style fixes. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove NO_DOOR_LOCKING defineBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove struct ide_cd_{config,state}_flagsBartlomiej Zolnierkiewicz
* Remove unused ->{writing,reserved} fields from struct ide_cd_config_flags. * Move ->max_speed from struct ide_cd_config_flags to struct cdrom_info. * Move ->current_speed from struct ide_cd_state_flags to struct cdrom_info. * Add defines for config and state flags. * Add 'unsigned int cd_flags' to struct cdrom_info and use ->cd_flags instead of ->{config,state}_flags. * Remove no longer needed struct ide_cd_{config,state}_flags. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide-cd: remove struct atapi_capabilities_page (take 2)Bartlomiej Zolnierkiewicz
* Remove struct atapi_capabilities_page. * Add ATAPI_CAPABILITIES_PAGE[_PAD]_SIZE define. v2: * The buf[] array access indexes were swapped between 'curspeed'/'maxspeed'. (Noticed by Borislav Petkov). Cc: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 02:03:37 +0000