summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-07-23spi/bcm63xx: fix clock configuration selectionFlorian Fainelli
We are currently using an inferior or equal operator for comparing the transfer frequency with the clock frequency table. Because of this, we always end up selecting 20Mhz as a frequency, due to the inequality transfer hz <= 20 Mhz being always true. Fix this by reversing the inequality, which is how the comparison should be done. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-23spi/orion: add device tree bindingAndrew Lunn
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-22spi/omap2: mark omap2_mcspi_master_setup as __devinitArnd Bergmann
This warning recently appeared with omap2plus_defconfig: WARNING: drivers/spi/built-in.o(.devinit.text+0x3c4): Section mismatch in reference from the function omap2_mcspi_probe() to the function .init.text:omap2_mcspi_master_setup() The function __devinit omap2_mcspi_probe() references a function __init omap2_mcspi_master_setup(). If omap2_mcspi_master_setup is only used by omap2_mcspi_probe then annotate omap2_mcspi_master_setup with a matching annotation. The fix is obviously to mark the omap2_mcspi_master_setup function as __devinit, rather than __init. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: omap2-mcspi: Fix the below warningShubhrajyoti D
The dma_map and dma_unmap should have same parameter passed otherwise we get the below warn. ks8851 spi1.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000009f22] [ 2.066925] Modules linked in: [ 2.070312] [ 2.071929] [<c001c250>] (unwind_backtrace+0x0/0x130) from [<c0043d84>] (warn_slowpath_common+0x4c/0x64) [ 2.081909] [<c0043d84>] (warn_slowpath_common+0x4c/0x64) from [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) [ 2.091949] [<c0043e30>] (warn_slowpath_fmt+0x30/0x40) from [<c0293824>] (check_unmap+0x6d0/0x7b0) [ 2.101348] [<c0293824>] (check_unmap+0x6d0/0x7b0) from [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) [ 2.111053] [<c02939cc>] (debug_dma_unmap_page+0x64/0x70) from [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) [ 2.121582] [<c03519a4>] (omap2_mcspi_txrx_dma+0x2d8/0x4fc) from [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) [ 2.132537] [<c03524d8>] (omap2_mcspi_work.clone.4+0xf0/0x290) from [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) [ 2.144592] [<c0352900>] (omap2_mcspi_transfer_one_message+0x288/0x438) from [<c03503bc>] (spi_pump_messages+0x100/0x160) [ 2.156127] [<c03503bc>] (spi_pump_messages+0x100/0x160) from [<c006635c>] (kthread_worker_fn+0xac/0x180) [ 2.166168] [<c006635c>] (kthread_worker_fn+0xac/0x180) from [<c0066578>] (kthread+0x90/0x9c) [ 2.175140] [<c0066578>] (kthread+0x90/0x9c) from [<c00157fc>] (kernel_thread_exit+0x0/0x8) [ 2.183898] ---[ end trace d1830ce6e44292f2 ]--- Fix the warn by changing the unmap parameter. Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-20spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driverLars-Peter Clausen
This patch adds support for the I2C-SPI bridge which can be found on the Analog Devices AD-FMCOMMS1-EBZ board. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi/imx: use gpio_is_valid to determine if a gpio is validHui Wang
Use gpio_is_valid() to replace "gpio >= 0" or "gpio < 0". Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-13spi/imx: remove redundant config.speed_hz settingHui Wang
The config.speed_hz is just setted at the two lines ahead of it, obviously we don't need to copy the code to set the config.speed_hz again. Remove it for a cleanup. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hui Wang <jason77.wang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-11Merge branch 'pl022' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into spi-next
2012-07-10spi/gpio: start with CS non-activeUwe Kleine-König
The chip select line was configured as output with the initial value being active explicitly. It was later deasserted during spi_bitbang_setup() without any clock activity in between. So it makes no sense to activate the device at all and the chip select line can better start non-active. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10spi: tegra: use dmaengine based dma driverLaxman Dewangan
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI FIFO and memory in place of legacy Tegra APB DMA. The new driver is selected if legacy driver is not selected and new DMA driver is enabled through config file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-02spi/pl022: cleanup pl022 header documentationAlexandre Pereira da Silva
Remove the unused fields from struct ssp_config_chip that was removed before Add bus_id documentation to pl022_ssp_controller Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-07-02spi/pl022: enable runtime PMLinus Walleij
If we're gonna use runtime PM it's a pretty good idea to actually enable it in probe() and disable it in remove() too, so it gets used for real. Up until now we only fooled around with the reference count. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-02spi/pl022: delete DB5500 supportLinus Walleij
This ASIC variant has been deleted from the ARM tree, no need to keep support around. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-02spi/pl022: disable port when unusedVirupax Sadashivpetimath
Commit ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0 "spi: create a message queueing infrastructure" Accidentally deleted the logic to disable the port when unused leading to higher power consumption. Fix this up. Cc: stable@kernel.org Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-30Linux 3.5-rc5v3.5-rc5Linus Torvalds
2012-06-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30printk.c: fix kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30linux/irq.h: fix kernel-doc warningRandy Dunlap
Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-30Merge branch 'v3.5-samsung-fixes-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30ARM: imx6q: fix suspend regression caused by common clk migrationShawn Guo
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-06-30Merge tag 'omap-fixes-for-v3.5-rc4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
2012-06-30Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
2012-06-30Merge tag 'driver-core-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
2012-06-30Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', ↵Len Brown
'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
2012-06-30acpi_pad: fix power_saving thread deadlockStuart Hayes
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by: Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-30ACPI video: Still use ACPI backlight control if _DOS doesn't existZhang Rui
This fixes a regression in 3.4-rc1 caused by commit ea9f8856bd6d4ed45885b06a338f7362cd6c60e5 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-29Merge tag 'pm-for-3.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
2012-06-29printk: Optimize if statement logic where newline existsSteven Rostedt
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mop Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
2012-06-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
2012-06-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
2012-06-29Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
2012-06-29printk: flush continuation lines immediately to consoleKay Sievers
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-29powerpc/pseries: Fix software invalidate TCEMichael Neuling
The following added support for powernv but broke pseries/BML: 1f1616e powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc: check_and_cede_processor() never cedesAnton Blanchard
Commit f948501b36c6 ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc/ftrace: Do not trace restore_interrupts()Steven Rostedt
As I was adding code that affects all archs, I started testing function tracer against PPC64 and found that it currently locks up with 3.4 kernel. I figured it was due to tracing a function that shouldn't be, so I went through the following process to bisect to find the culprit: cat /debug/tracing/available_filter_functions > t num=`wc -l t` sed -ne "1,${num}p" t > t1 let num=num+1 sed -ne "${num},$p" t > t2 cat t1 > /debug/tracing/set_ftrace_filter echo function /debug/tracing/current_tracer <failed? bisect t1, if not bisect t2> It finally came down to this function: restore_interrupts() I'm not sure why this locks up the system. It just seems to prevent scheduling from occurring. Interrupts seem to still work, as I can ping the box. But all user processes freeze. When restore_interrupts() is not traced, function tracing works fine. Cc: stable@kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc: Fix Section mismatch warnings in prom_init.cLi Zhong
This patches tries to fix a couple of Section mismatch warnings like following one: WARNING: arch/powerpc/kernel/built-in.o(.text+0x2923c): Section mismatch in reference from the function .prom_query_opal() to the function .init.text:.call_prom() The function .prom_query_opal() references the function __init .call_prom(). This is often because .prom_query_opal lacks a __init annotation or the annotation of .call_prom is wrong. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preemptTiejun Chen
In entry_64.S version of ret_from_except_lite, you'll notice that in the !preempt case, after we've checked MSR_PR we test for any TIF flag in _TIF_USER_WORK_MASK to decide whether to go to do_work or not. However, in the preempt case, we do a convoluted trick to test SIGPENDING only if PR was set and always test NEED_RESCHED ... but we forget to test any other bit of _TIF_USER_WORK_MASK !!! So that means that with preempt, we completely fail to test for things like single step, syscall tracing, etc... This should be fixed as the following path: - Test PR. If not set, go to resume_kernel, else continue. - If go resume_kernel, to do that original do_work. - If else, then always test for _TIF_USER_WORK_MASK to decide to do that original user_work, else restore directly. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc: Fix uninitialised error in numa.cMichael Neuling
chroma_defconfig currently gives me this with gcc 4.6: arch/powerpc/mm/numa.c:638:13: error: 'dm' may be used uninitialized in this function [-Werror=uninitialized] It's a bogus warning/error since of_get_drconf_memory() only writes it anyway. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: <stable@kernel.org> [v3.3+] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-29powerpc: Fix BPF_JIT code to link with multiple TOCsMichael Ellerman
If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-28Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl
2012-06-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias
2012-06-28Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes from Jan Kara: "Make UDF more robust in presence of corrupted filesystem" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fortify loading of sparing table udf: Avoid run away loop when partition table length is corrupted udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
2012-06-28Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion
2012-06-28watchdog: core: fix WDIOC_GETSTATUS return valueWim Van Sebroeck
In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: hpwdt: Unregister NMI events on exit.Mingarelli, Thomas
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28watchdog: iTCO_wdt: add platform driver module aliasJan Beulich
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-06-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nearly all intel, one missing license header in nouveau, nothing majorly earth shattering." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: allow PCH PWM override on IVB" drm/nouveau: add license header to prime. drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-28Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh: kfr2r09: fix compile breakage
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking update from David Miller: 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg. 2) Add device IDs for AR3011 and AR3012 bluetooth chips. From Giancarlo Formicuccia and Marek Vasut. 3) Fix wireless regulatory deadlock, from Eliad Peller. 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet. 5) Revert the two commits that added skb_orphan_try(), it causes erratic bonding behavior with UDP clients and the gains it used to give are mostly no longer happening due to how BQL works. From Eric Dumazet. 6) It took two tries, but Thomas Graf fixed a problem wherein we registered ipv6 routing procfs files before their backend data were initialized properly. 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi. 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from Jason Wang. 9) Fix use of stale SKB data pointer after skb_linearize() call in batman-adv, from Antonio Quartulli. 10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander Duyck. 11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn Mork. 12) Fix suspend/resume and open failure handling in usbnet from Ming Lei. 13) Attempt to fix device r8169 hangs for certain chips, from Francois Romieu. 14) Fix advancement of RX dirty pointer in some situations in sh_eth driver, from Yoshihiro Shimoda. 15) Attempt to fix restart of IPV6 routing table dumps when there is an intervening table update. From Eric Dumazet. 16) Respect security_inet_conn_request() return value in ipv6 TCP. From Neal Cardwell. 17) Add another iPAD device ID to ipheth driver, from Davide Gerhard. 18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep splats, from Eric Dumazet. 19) Make sure all bridge devices, regardless of whether they were created via netlink or ioctls, have their rtnetlink ops hooked up. From Thomas Graf and Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) 9p: fix min_t() casting in p9pdu_vwritef() can: flexcan: use be32_to_cpup to handle the value of dt entry xen/netfront: teardown the device before unregistering it. bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) vhost: use USER_DS in vhost_worker thread ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP net: l2tp_eth: use LLTX to avoid LOCKDEP splats mac802154: add missed braces net: l2tp_eth: fix l2tp_eth_dev_xmit race net/mlx4_en: Release QP range in free_resources net/mlx4: Use single completion vector after NOP failure net/mlx4_en: Set correct port parameters during device initialization ipheth: add support for iPad caif-hsi: Add missing return in error path caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost caif: Clear shutdown mask to zero at reconnect. tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request() ipv6: fib: fix fib dump restart batman-adv: fix race condition in TT full-table replacement batman-adv: only drop packets of known wifi clients ...