summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-12-04sparc: gitignore a few filesSam Ravnborg
With this 'git status' no longer reports any new files At least not for a sparc allnoconfig build Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: clean boot/Sam Ravnborg
Leave all cleaning to boot/Makefile and delete zImage too when we do a 'make clean' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: refactor MakefileSam Ravnborg
The btfixup step needs knowledge of all the .o files, but there is no need to pass them in independent variables. Simplify it to use only two variables. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify asm-offsets.cSam Ravnborg
sparc64 does not use constants generated from asm-offsets but to prepare it to do so the parts that could be shared do now generate constants for sparc64 too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: use vmlinux.lds.S from sparcSam Ravnborg
Previous commit made them identical so use the sparc version Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: prepare vmlinux.lds.S for unificationSam Ravnborg
This patch makes the two vmlinux.lds.S files identical and serve as documentation for the changes in each file. This mainly add stuffs to sparc32 that is otherwise only used by sparc64 and thus it should have no effect. Build tested only. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Provide oprofile pseudo-NMI on Niagara.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add performance counter hypervisor calls for sun4v.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add save_stack_trace_tsk().David S. Miller
And this allows us to indicate HAVE_LATENCYTOP_SUPPORT. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc32: pdev_to_pnode() is used from __devinitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc32: Don't btfixup cache flush ops for viking multiple times.David S. Miller
Just do it once. Pointed out by Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: combine unistd_{32,64}.hStephen Rothwell
This is complicated a little because compat_audit.c wants to see only the 32bit syscall numbers, but is being built in a 64bit compile. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Use NMI oprofile profiling on cheetah and derivative cpus.David S. Miller
We use clock cycle counter, adjusted to HZ. This can be extended to sun4v based processors as well, as they also have a proper overflow interrupt facility for the performance counters. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add write_pic() helper.David S. Miller
It writes the %pic register, keeping mind of processor bugs. Implement reset_pic() in terms of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Block NMIs in critical section of context switch.David S. Miller
In these instructions we load the new thread register, switch the register window, and setup the new frame pointer. All of these must appear atomic, and things will explode if we take a PIL=15 NMI interrupt in the middle of this sequence. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Make special trap return path for TRAP_NMI().David S. Miller
We don't want the rtrap path to try and run softirqs or anything like that when returning from a PIL==15 NMI. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Make %pil level 15 a pseudo-NMI.David S. Miller
So that we can profile code even in a local_irq_disable() section, only write 14 (instead of 15) into the %pil register to disable IRQs. This allows PIL level 15 to serve as a pseudo NMI. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: Include drivers/pcmcia/KconfigDavid S. Miller
Stephen Rothwell pointed out that pcmcia can't be enabled on sparc64. There is an empty non-prompt PCMCIA explicit entry in arch/sparc/Kconfig but that doesn't do anything. 32-bit sparc needs a small hack to make this work, since it doesn't use the generic IRQ layer yes. We have to provide a dummy definition of probe_irq_mask(), since this is used by the yenta socket driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add interface for registering a performance counter IRQ handler.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add tsb-ratio sysctl.David S. Miller
Add a sysctl to tweak the RSS limit used to decide when to grow the TSB for an address space. In order to avoid expensive divides and multiplies only simply positive and negative powers of two are supported. The function computed takes the number of TSB translations that will fit at one time in the TSB of a given size, and either adds or subtracts a percentage of entries. This final value is the RSS limit. See tsb_size_to_rss_limit(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify mm/Sam Ravnborg
- move all sparc64/mm/ files to arch/sparc/mm/ - commonly named files are named _64.c - add files to sparc/mm/Makefile preserving link order - delete now unused sparc64/mm/Makefile - sparc64 now finds mm/ in sparc Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare mm/ for unificationSam Ravnborg
- rename files where sparc64 has similar files to _32.c - Restructure Makefile - Sneak in -Werror as we have for sparc64 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: unify arch/sparc64/oprofile/Sam Ravnborg
A simple: diff arch/sparc64/oprofile/init.c arch/sparc/oprofile/init.c diff arch/sparc64/oprofile/Makefile arch/sparc/oprofile/Makefile revealed that the directories were equal. So let sparc64 point to the sparc version and drop the sparc64 oprofile dir Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: unify math-emuSam Ravnborg
Move relavent files to sparc/math-emu and adjust path/include accordingly. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare math-emu for unificationSam Ravnborg
Add _32 to filenames to make them 32 bit unique Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: cleanup math-emuSam Ravnborg
- Drop unused assignment from Makefile - Replace EXTRA_CFLAGS with ccflags-y - Delete unused file Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: add BITS to arch MakefileSam Ravnborg
BITS will be used to simplify unified Makefiles Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify Kconfig filesSam Ravnborg
Merge all of sparc64 Kconfig to sparc Kconfig. The merge was checked by: - visual inspection in menuconfig - result of allnoconfig, allmodconfig, allyesconfig was checked before and after - result of a number of randconfig was checked before and after scripts/diffconfig was used to check if the config differed before and after The validity of the test was checked by on purpose introducing a few bugs - and they were all caught by first run. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: add "Bus options" to KconfigSam Ravnborg
To align with sparc64 add a "Bus options" menu This has the additiona advantage that all bus options are kept together Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: add menu "Executable file formats"Sam Ravnborg
This is what we use in sparc64 - make sparc equal Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: use Kconfig.hzSam Ravnborg
We already has the proper definition in place in param.h. So use the common Kconfig.hz file Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: drop UNIX98_PTYS from arch KconfigSam Ravnborg
We have it in drivers/char/Kconfig There is no need to ask twice Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: added more config options to the menusSam Ravnborg
moved a few config entries inside a menu so we do not clutter the first screen up with a lot of detailed config options. The structure now remotely resemble the structure for i386 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: refactor Kconfig a littleSam Ravnborg
Mode declaration of SPARC up in the top to match the structure of sparc64 Kconfig Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: unify Kconfig.debugSam Ravnborg
Let sparc and sparc64 use the same Kconfig.debug Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Stop using memory barriers for atomics and locks.David S. Miller
The kernel always executes in the TSO memory model now, so none of this stuff is necessary any more. With helpful feedback from Nick Piggin. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Run the kernel always in the TSO memory model.David S. Miller
The fact of the matter is, all UltraSPARC-III and later chips only implement TSO. They don't implement PSO and RMO memory models at all. Only the Ultra-I and Ultra-II family chips implement RMO and they are only helped marginally by using this setting when executing kernel code. The big plus to doing this is that we can eliminate all of the non-Sync memory barriers in the kernel except for the ones used in the optimized memcpy/memset code (these use block load and store operations which have their own memory ordering rules). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04of: Fix comment, sparc no longer uses of_device objects on special busses.David S. Miller
It only uses of_platform_bus_type. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Rework auxio driver to save some text space.David S. Miller
Use common functions instead of inlining and duplicating logic over and over to handle the SBUS vs. EBUS cases. Before: text data bss dec hex filename 715 568 16 1299 513 arch/sparc64/kernel/auxio.o After: text data bss dec hex filename 631 568 16 1215 4bf arch/sparc64/kernel/auxio.o Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
2008-12-04sparc64: Sync FPU state in VIS emulation handler.Hong H. Pham
Copy the FPU state to the task's thread_info->fpregs for the VIS emulation functions to access. Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03sparc64: Fix VIS emulation bugsJoseph Myers
This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix setting of max_segment_size and seg_boundary mask block: internal dequeue shouldn't start timer block: set disk->node_id before it's being used When block layer fails to map iov, it calls bio_unmap_user to undo
2008-12-03Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts powerpc: Fix dma_map_sg() cache flushing on non coherent platforms
2008-12-03Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: NLM: client-side nlm_lookup_host() should avoid matching on srcaddr nfsd: use of unitialized list head on error exit in nfs4recover.c Add a reference to sunrpc in svc_addsock nfsd: clean up grace period on early exit
2008-12-03iTCO_wdt: fix typo when setting TCO_EN bitLinus Torvalds
The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which obviously didn't set that bit at all, but instead just reset all the other bits in the SMI_EN register. This bug seemingly caused various random behavior, with Frans Pop reporting that X.org just silently hung at startup and Rafael Wysocki reports the fan spinning with full speed. See http://lkml.org/lkml/2008/12/3/178 http://bugzilla.kernel.org/show_bug.cgi?id=12162 The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards" (commit 7cd5b08be3c489df11b559fef210b81133764ad4), but the bogus code existed before that too (in the "supermicro_old_pre_stop()" function), it just apparently never showed up due to different logic. In that commit the broken code got moved around and now gets executed much more. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Frans Pop <elendil@planet.nl> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03sparc: asm/bitops.h should define __flsRusty Russell
bitops_64.h includes the generic one; pretty sure 32 should too. (Found by using __fls in generic code and breaking sparc defconfig build: thanks Stephen and linux-next!) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dtsAnton Vorontsov
Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99 ("powerpc/83xx: Add support for MCU microcontroller in .dts files"): the commit adds the MCU controller node into the DMA node, which is wrong because the MCU sits on the I2C bus. Fix this by moving the MCU node into the I2C controller node. The original patch[1] was OK though. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-03block: fix setting of max_segment_size and seg_boundary maskMilan Broz
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm devices. When stacking devices (LVM over MD over SCSI) some of the request queue parameters are not set up correctly in some cases by default, namely max_segment_size and and seg_boundary mask. If you create MD device over SCSI, these attributes are zeroed. Problem become when there is over this mapping next device-mapper mapping - queue attributes are set in DM this way: request_queue max_segment_size seg_boundary_mask SCSI 65536 0xffffffff MD RAID1 0 0 LVM 65536 -1 (64bit) Unfortunately bio_add_page (resp. bio_phys_segments) calculates number of physical segments according to these parameters. During the generic_make_request() is segment cout recalculated and can increase bio->bi_phys_segments count over the allowed limit. (After bio_clone() in stack operation.) Thi is specially problem in CCISS driver, where it produce OOPS here BUG_ON(creq->nr_phys_segments > MAXSGENTRIES); (MAXSEGENTRIES is 31 by default.) Sometimes even this command is enough to cause oops: dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10 This command generates bios with 250 sectors, allocated in 32 4k-pages (last page uses only 1024 bytes). For LVM layer, it allocates bio with 31 segments (still OK for CCISS), unfortunatelly on lower layer it is recalculated to 32 segments and this violates CCISS restriction and triggers BUG_ON(). The patch tries to fix it by: * initializing attributes above in queue request constructor blk_queue_make_request() * make sure that blk_queue_stack_limits() inherits setting (DM uses its own function to set the limits because it blk_queue_stack_limits() was introduced later. It should probably switch to use generic stack limit function too.) * sets the default seg_boundary value in one place (blkdev.h) * use this mask as default in DM (instead of -1, which differs in 64bit) Bugs related to this: https://bugzilla.redhat.com/show_bug.cgi?id=471639 http://bugzilla.kernel.org/show_bug.cgi?id=8672 Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03block: internal dequeue shouldn't start timerTejun Heo
blkdev_dequeue_request() and elv_dequeue_request() are equivalent and both start the timeout timer. Barrier code dequeues the original barrier request but doesn't passes the request itself to lower level driver, only broken down proxy requests; however, as the original barrier code goes through the same dequeue path and timeout timer is started on it. If barrier sequence takes long enough, this timer expires but the low level driver has no idea about this request and oops follows. Timeout timer shouldn't have been started on the original barrier request as it never goes through actual IO. This patch unexports elv_dequeue_request(), which has no external user anyway, and makes it operate on elevator proper w/o adding the timer and make blkdev_dequeue_request() call elv_dequeue_request() and add timer. Internal users which don't pass the request to driver - barrier code and end_that_request_last() - are converted to use elv_dequeue_request(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 14:34:54 +0000