| Age | Commit message (Collapse) | Author |
|---|
|
It hasn't "summed" anything in over 7 years, and it's
just a straight mempcy ala skb_copy_to_linear_data()
so just get rid of it.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the code for /proc/net/tcp disable BH while iterating
over the entire established hash table. Even though we call
cond_resched_softirq for each entry, we still won't process
softirq's as regularly as we would otherwise do which results
in poor performance when the system is loaded near capacity.
This anomaly comes from the 2.4 code where this was all in a
single function and the local_bh_disable might have made sense
as a small optimisation.
The cost of each local_bh_disable is so small when compared
against the increased latency in keeping it disabled over a
large but mostly empty TCP established hash table that we
should just move it to the individual read_lock/read_unlock
calls as we do in inet_diag.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Over the years this code has gotten hairier. Resulting in many long
discussions over long summer days and patches that get it wrong.
This patch helps tame that code so normal people will understand it.
Thanks to Thomas Graf, Peter J. waskiewicz Jr, and Patrick McHardy
for their valuable reviews.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enhances TIPC's stream socket send routine so that
it avoids transmitting data in chunks that require fragmentation
and reassembly, thereby improving performance at both the
sending and receiving ends of the connection.
The "maximum packet size" hint that records MTU info allows
the socket to decide how big a chunk it should send; in the
event that the hint has become stale, fragmentation may still
occur, but the data will be passed correctly and the hint will
be updated in time for the following send. Note: The 66060 byte
pseudo-MTU used for intra-node connections requires the send
routine to perform an additional check to ensure it does not
exceed TIPC"s limit of 66000 bytes of user data per chunk.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch modifies TIPC's socket API to utilize existing
generic routines to indicate unsupported operations, rather
than adding similar TIPC-specific routines.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch simplifies TIPC's Ethernet receive routine to take
advantage of information already present in each incoming sk_buff
indicating whether the packet was explicitly sent to the interface,
has been broadcast to all interfaces, or was picked up because the
interface is in promiscous mode.
This new approach also fixes the problem of TIPC accepting unwanted
traffic through UML's multicast-based Ethernet interfaces (which
deliver traffic in a promiscuous manner even if the interface is
not configured to be promiscuous).
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With help from Chris Wedgwood.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the termios2 structure ready for enabling on most platforms. One or
two like Sparc are plain weird so have been left alone. Most can use the
same structure as ktermios for termios2 (ie the newer ioctl uses the
structure matching the current kernel structure)
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.
This makes code about 300 lines smaller:
The first version of this patch made the helper functions static inline
in the seq_file.h header. This patch moves them to the fs/seq_file.c as
Andrew proposed. The vmlinux .text section sizes are as follows:
2.6.22-rc1-mm1: 0x001794d5
with the previous version: 0x00179505
with this patch: 0x00179135
The config file used was make allnoconfig with the "y" inclusion of all
the possible options to make the files modified by the patch compile plus
drivers I have on the test node.
This patch:
Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sx.c is failing to locate Graham's card.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Graham Murray <gmurray@webwayone.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a hybrid version of the patch to add the LZO1X compression
algorithm to the kernel. Nitin and myself have merged the best parts of
the various patches to form this version which we're both happy with (and
are jointly signing off).
The performance of this version is equivalent to the original minilzo code
it was based on. Bytecode comparisons have also been made on ARM, i386 and
x86_64 with favourable results.
There are several users of LZO lined up including jffs2, crypto and reiser4
since its much faster than zlib.
Signed-off-by: Nitin Gupta <nitingupta910@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: at91_mci: fix hanging and rework to match flowcharts
mmc: at91_mci typo
sdhci: Fix "Unexpected interrupt" handling
mmc: fix silly copy-and-paste error
mmc: move layer init and workqueue to core file
mmc: refactor host class handling
mmc: refactor bus operations
sdhci: add ene controller id
mmc: bounce requests for simple hosts
|
|
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
bonding/bond_main.c: make 2 functions static
ps3: gigabit ethernet driver for PS3, take3
[netdrvr] Fix dependencies for ax88796 ne2k clone driver
eHEA: Capability flag for DLPAR support
Remove sk98lin ethernet driver.
sunhme.c:quattro_pci_find() must be __devinit
bonding / ipv6: no addrconf for slaves separately from master
atl1: remove write-only var in tx handler
macmace: use "unsigned long flags;"
Cleanup usbnet_probe() return value handling
netxen: deinline and sparse fix
eeprom_93cx6: shorten pulse timing to match spec (bis)
phylib: Add Marvell 88E1112 phy id
phylib: cleanup marvell.c a bit
AX88796 network driver
IOC3: Switch to pci refcounting safe APIs
e100: Fix Tyan motherboard e100 not receiving IPMI commands
QE Ethernet driver writes to wrong register to mask interrupts
rrunner.c:rr_init() must be __devinit
tokenring/3c359.c:xl_init() must be __devinit
...
|
|
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits)
[libata] sata_mv: print out additional chip info during probe
[libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)
[libata] Clean up driver udma_mask initializers
libata: Support chips with 64K PRD quirk
Add a PCI ID for santa rosa's PATA controller.
sata_sil24: sil24_interrupt() micro-optimisation
Add irq_flags to struct pata_platform_info
sata_promise: cleanups
[libata] pata_ixp4xx: kill unused var
ata_piix: fix pio/mwdma programming
[libata] ahci: minor internal cleanups
[ATA] Add named constant for ATAPI command DEVICE RESET
[libata] sata_sx4, sata_via: minor documentation updates
[libata] ahci: minor internal cleanups
[libata] ahci: Factor out SATA port init into a separate function
[libata] pata_sil680: minor cleanups from benh
[libata] sata_sx4: named constant cleanup
[libata] pata_ixp4xx: convert to new EH
[libata] pdc_adma: Reorder initializers with a couple structs
...
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
[MIPS] PNX8550: Cleanup proc code.
[MIPS] WRPPMC: Fix build.
[MIPS] Yosemite: Fix modpost warnings.
[MIPS] Change names of local variables to silence sparse
[MIPS] SB1: Fix modpost warning.
[MIPS] PNX: Fix modpost warnings.
[MIPS] Alchemy: Fix modpost warnings.
[MIPS] Non-FPAFF: Fix warning.
[MIPS] DEC: Fix modpost warning.
[MIPS] MIPSsim: Enable MIPSsim virtual network driver.
[MIPS] Delete Ocelot 3 support.
[MIPS] remove LASAT Networks platforms support
[MIPS] Early check for SMTC kernel on non-MT processor
[MIPS] Add debugfs files to show fpuemu statistics
[MIPS] Add some debugfs files to debug unaligned accesses
[MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
[MIPS] tc35815: Load MAC address via platform_device
[MIPS] Move FPU affinity code into separate file.
[MIPS] Make ioremap() work on TX39/49 special unmapped segment
[MIPS] rbtx4938: Update and minimize defconfig
...
|
|
* git://git.infradead.org/~dwmw2/battery-2.6:
[BATTERY] ds2760 W1 slave
[BATTERY] One Laptop Per Child power/battery driver
[BATTERY] Apple PMU driver
[BATTERY] 1-Wire ds2760 chip battery driver
[BATTERY] APM emulation driver for class batteries
[BATTERY] pda_power platform driver
[BATTERY] Universal power supply class (was: battery class)
|
|
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] vmlogrdr function annotation.
[S390] s390: rename CPU_IDLE to S390_CPU_IDLE
[S390] cio: Remove prototype for non-existing function cmf_reset().
[S390] zcrypt: fix request timeout handling
[S390] system call optimization.
[S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
[S390] Remove volatile from atomic_t
[S390] Program check in diag 210 under 31 bit
[S390] Bogomips calculation for 64 bit.
[S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
[S390] zcore: Fix __user annotation.
[S390] fixed cdl-format detection.
[S390] sclp: Test facility list before executing a service call.
[S390] sclp: introduce some new interfaces.
[S390] Fixed comment typo.
[S390] vmcp cleanup
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
[GFS2] Accept old format NFS filehandles
[GFS2] Small fixes to logging code
[DLM] dump more lock values
[GFS2] Remove i_mode passing from NFS File Handle
[GFS2] Obtaining no_formal_ino from directory entry
[GFS2] git-gfs2-nmw-build-fix
[GFS2] System won't suspend with GFS2 file system mounted
[GFS2] remounting w/o acl option leaves acls enabled
[GFS2] inode size inconsistency
[DLM] Telnet to port 21064 can stop all lockspaces
[GFS2] Fix gfs2_block_truncate_page err return
[GFS2] Addendum to the journaled file/unmount patch
[GFS2] Simplify multiple glock aquisition
[GFS2] assertion failure after writing to journaled file, umount
[GFS2] Use zero_user_page() in stuffed_readpage()
[GFS2] Remove bogus '\0' in rgrp.c
[GFS2] Journaled file write/unstuff bug
[DLM] don't require FS flag on all nodes
[GFS2] Fix deallocation issues
[GFS2] return conflicts for GETLK
...
|
|
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
pipe: add documentation and comments
pipe: change the ->pin() operation to ->confirm()
Remove remnants of sendfile()
xip sendfile removal
splice: completely document external interface with kerneldoc
sendfile: remove bad_sendfile() from bad_file_ops
shmem: convert to using splice instead of sendfile()
relay: use splice_to_pipe() instead of open-coding the pipe loop
pipe: allow passing around of ops private pointer
splice: divorce the splice structure/function definitions from the pipe header
splice: relay support
sendfile: convert nfsd to splice_direct_to_actor()
sendfile: convert nfs to using splice_read()
loop: convert to using splice_direct_to_actor() instead of sendfile()
splice: add void cookie to the actor data
sendfile: kill generic_file_sendfile()
sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
sys_sendfile: switch to using ->splice_read, if available
vmsplice: add vmsplice-to-user support
splice: abstract out actor data
|
|
* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
Use list_for_each_entry() instead of list_for_each() in the block device
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
block/Kconfig already has its own "menuconfig" so remove these
Use menuconfigs instead of menus, so the whole menu can be disabled at once
cfq-iosched: fix async queue behaviour
unexport bio_{,un}map_user
Remove legacy CDROM drivers
[PATCH] fix request->cmd == INT cases
cciss: add new controller support for P700m
[PATCH] Remove acsi.c
[BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
[PATCH] cdrom_sysctl_info fix
blk_hw_contig_segment(): bad segment size checks
[TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
|
|
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Chad Tindel <ctindel@users.sourceforge.net>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Hi,
This is the third submission of the network driver for PS3.
The differences from the previous one are:
- renamed source file names so that their prefix can match
with the module name
- added cbe-oss-dev@ozlabs.org line for MAINTAINER file
- changed some in copyright comments
If there are no more comments, please apply for 2.6.23.
Thank you
--
Subject: PS3: Ethernet driver
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Add Gigabit Ethernet support for the PS3 game console. The module will
be called ps3_gelic.
CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
It needs writesb(), not available on all platforms.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
This patch introduces a capability flag that is used by the DLPAR userspace
tool to check which DLPAR features are supported by the eHEA driver.
Missing goto has been included.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Unmaintained, superceded by skge.
Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
This patch fixes the following section mismatch:
<-- snip -->
...
MODPOST vmlinux
WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove')
...
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
At present, when a device is enslaved to bonding, if ipv6 is
active then addrconf will be initated on the slave (because it is closed
then opened during the enslavement processing). This causes DAD and RS
packets to be sent from the slave. These packets in turn can confuse
switches that perform ipv6 snooping, causing them to incorrectly update
their forwarding tables (if, e.g., the slave being added is an inactve
backup that won't be used right away) and direct traffic away from the
active slave to a backup slave (where the incoming packets will be
dropped).
This patch alters the behavior so that addrconf will only run on
the master device itself. I believe this is logically correct, as it
prevents slaves from having an IPv6 identity independent from the
master. This is consistent with the IPv4 behavior for bonding.
This is accomplished by (a) having bonding set IFF_SLAVE sooner
in the enslavement processing than currently occurs (before open, not
after), and (b) having ipv6 addrconf ignore UP and CHANGE events on
slave devices.
The eql driver also uses the IFF_SLAVE flag. I inspected eql,
and I believe this change is reasonable for its usage of IFF_SLAVE, but
I did not test it.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Code will do local_irq_save() on it.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
usbnet_probe() handles a positive return value from the driver bind()
function as success, but will later only setup the status handler if the
return value was zero, leading to confusion. Patch adjusts this to accept
positive values as success in both checks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.
Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Based on an original idea by John W. Linville.
It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the
88E1111 inits.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Simplify the marvell driver init a bit: Make the supported devices an
array instead of explicitly registering each structure. This makes it
considerably easier to add new devices down the road.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Support for the Asix AX88796 network controller, an
NE2000 compatible 10/100 ethernet device with internal
PHY.
The driver supports PHY settings via either ioctl() or
the ethtool driver ops.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Here's a slightly cleaner way of creating the /proc structure for the
pnx8850. mostly, it creates a directory with default mode 555, since the
one you're creating is mode 444, which is somewhat unusual for a directory
under /proc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Using another systems defines is a safe way to get your code broken by
accident when that system is removed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch is an workaround for these sparse warnings:
linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')
WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd40): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd44): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MODPOST vmlinux
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1750): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1754): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms')
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Export contents of struct mips_fpu_emulator_stats via debugfs.
There is no way to read these statistics for now but they (at least
the "emulated" count) might be sometimes useful for performance tuning
on FPU-less CPUs.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Currently a number of unaligned instructions is counted but not used.
Add /debug/mips/unaligned_instructions file to show the value.
And add /debug/mips/unaligned_action to control behavior upon an
unaligned access. Possible actions are:
0: silently fixup the unaligned access.
1: send SIGBUS.
2: dump registers, process name, etc. and fixup.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
