summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-03-05ASoC: rsnd: remove all rsnd_xxx_remove()Kuninori Morimoto
Now, rsnd_xxx_remove() do nothing. remove these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: nothing to do on rsnd_dai_remove()Kuninori Morimoto
rsnd_dai_remove() called rsnd_path_exit(), but these memory will be cleaned automatically. Because it is created by devm_kzalloc(). nothing to do on rsnd_dai_remove() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: use mod probe method on SSIKuninori Morimoto
Now, it can use .probe Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: use mod probe method on SCUKuninori Morimoto
Now, it can use .probe Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: add probe/remove callback on rsnd_mod_opsKuninori Morimoto
Each rsnd mod needs specific probe method, and its best timing is DAI probe timing. But current code runs it mod probe timing. This patch adds new probe/remove callback to solve it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: call rsnd_scu_ssi_mode_init() from SSIKuninori Morimoto
Current R-Car sound driver is assuming that SCU mod is used even though it is not needed. Because scu.c is controlling SSIU too. (it is Gen1 compatibility) But, SCU mod will be really not used if new platform dai feature was added. Thus, rsnd_scu_ssi_mode_init() is called from SSI directory by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: add rsnd_scu_enable_ssi_irq()Kuninori Morimoto
Current R-Car sound driver is assuming that SCU mod is used even though it is not needed. Because scu.c is controlling SSIU too. (it is Gen1 compatibility) But, SCU mod will be really not used if new platform dai feature was used. Thus, SSIU irq setting is called from SSI directory by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: Get correct SCU IDKuninori Morimoto
Current rsnd driver is assuming that SCU/SRU ID is same as SSIU/SSI ID, because Gen1 can't select it. But, Gen2 can select it. The SCU/SRU/SSIU/SSI pair depends on the platform. This patch get correct SCU ID from platform info. To keep compatible, it still assuming SCU ID = SSI ID if platform doesn't have info Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: add struct rsnd_dai_platform_infoKuninori Morimoto
R-Car sound DAI consists from SSI/SCU/SSIU/SRU... Current R-Car sound DAI is decided from these settings, but it is intuitively unclear, and is not good design for DT support. This patch adds new rsnd_dai_platform_info to solve this issue. But now, many platform is using this driver without rsnd_dai_platform_info. So, this patch still supports DAI settings via SSI to keep compatible. It will be removed in next Linux version. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: share reg_field and reduce memoryKuninori Morimoto
Gen1/Gen2 code never be used in same time. Thus, driver can share Gen1 only register and Gen2 only register. It can reduce memory too. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: modify rsnd_adg_ssi_ws_timing_gen2() parameterKuninori Morimoto
rsnd_adg_ssi_ws_timing_gen2() returns SSI WS timing, and it used "mod" as parameter. but, this "mod" is sometimes not ssi mod. Get SSI mod from rsnd_dai_stream Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: remove unused SSI_CONTROLKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: use function pointer for each probeKuninori Morimoto
R-Car sound consists of many devices. It will have more device support in the future. Thus, for each probe become now function pointer array. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: use devm_clk_get() instead of clk_get()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: get ssi/scu from rsnd_dai_streamKuninori Morimoto
Current driver is assuming that SSI id = SCU id. But, now, it can get correct SSI/SCU from rsnd_dai_stream. use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: use mod array instead of list on rdaiKuninori Morimoto
struct rsnd_dai_stream used list for mod list. It added only odd flexibility to current driver, and it is a factor which makes extendibility difficult. rsnd use mod array instead of list from now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: run rsnd_path_init() when probe() timingKuninori Morimoto
Current rsnd SSIU/SSI/SCU/SRU path is set when playback/capture starts up. But it is meaningless method, since the path is based on platform and can be set in probe() timing. This patch sets the path on probe() timing. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: tidyup RSND_SSI_xxx flagsKuninori Morimoto
6f3ab6c1c022e7a4877d38940cd45ae7804a15e2 (ASoC: rsnd: remove pin sync option) added unused RSND_SSI_CLK_FROM_ADG flag. It should remove RSND_SSI_SYNC. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: unify rdai namingKuninori Morimoto
struct rsnd_dai is called as "rdai", but its size has been called as "dai_nr". Unify these as "rdai" Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: remove verbose debug message from scu/ssiKuninori Morimoto
scu/ssi probe() already have more detail debug message. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: remove verbose function parameterKuninori Morimoto
priv has rcar_snd_info pointer. having priv and info in same time is verbose. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: move rsnd_mod_call() macroKuninori Morimoto
core.c is the only user of rsnd_mod_call() macro. Move it to core.c from rsnd.h Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: move priv member settings to upper sideKuninori Morimoto
There is no big meaning, but preparation for platform dai support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: print error if there is SRC settings mismatchKuninori Morimoto
rsnd request clock master if SRC is used Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()Kuninori Morimoto
DIV_EN register enable bit is required when you use Gen2 SRC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: tidyup original for_each_rsnd_xxx macroKuninori Morimoto
Current for_each_rsnd_xxx macro will read out-of-array's memory after last loop operation. It was not good C language operation, and the binary which was compiled by (at least) gcc 4.8.1 is broken This patch tidyup these issues Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07ASoC: rsnd: use device dependency clockKuninori Morimoto
Current R-Car sound driver is using device independent audio clock, but it is not good design for DT support. This patch adds device dependent clock support. But, there are some platform which is using independent audio clock. It is still supported at this point, but it will be removed soon. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add Gen2 SRC and DMAEngine supportKuninori Morimoto
Renesas sound Gen2 has SRC (= Sampling Rate Converter) which needs 2 DMAC. The data path image when you use SRC on Gen2 is [mem] -> Audio-DMAC -> SRC -> Audio-DMAC-peri-peri -> SSIU -> SSI This patch support SRC and DMAEnine. It is tested on R-Car H2 Lager board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rsnd_ssi_probe() goes forwarder than rsnd_scu_probe()Kuninori Morimoto
rsnd_ssi_probe() goes forwarder than rsnd_scu_probe(), since scu will need ssi information on Gen2 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove SSI dependent DMAEngine callbackKuninori Morimoto
Renesas Gen2 sound will use 2 DMAC which are Audio-DMAC, and Audio-DMAC-peri-peri. Current driver has callback function for each DMAC, because it assumed each DMAC needs special settings. But it became clear that these can share settings. This patch removes unnecessary callback Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: extracts Gen1/Gen2 common partsKuninori Morimoto
Renesas sound IP Gen1/Gen2 are similar, but different. This patch extracts Gen1/Gen2 common and dependency parts, and create Gen1/Gen2 ops to control it. According to this structure, SSIU setup which has been implemented on ssi.c can be moved to scu.c (SRU/SSIU/SCU should be implemented on scu.c) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add rsnd_ssi_is_play()Kuninori Morimoto
SCU needs SSI direction if Gen2. Add rsnd_ssi_is_play() function for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: merge SRC clock timing/settingKuninori Morimoto
SRC clock and timing setting register exist in SRU and ADG on Gen1. But, these are merged into ADG on Gen2. Current driver is supporting Gen1 SRC only at this point, but, above settings are set as different function. This patch merges these as preparation of Gen2 support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rsnd_scu_hpbif_is_enable() become macroKuninori Morimoto
rsnd_scu_hpbif_is_enable() is used only scu.c now. It can be local macro Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: Merge macros in scu.cKuninori Morimoto
Merge #define lines, since these are defined in the scattering place Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: clarify scu.c areaKuninori Morimoto
scu.c cares SRU(Gen1) / SCU(Gen2) / SSIU(Gen2) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: SCU should be called before SSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: don't use schedule_work() when rsnd_dma_start()Kuninori Morimoto
rsnd_dma_start() is the function to start DMAEngine. Current code is using schedule_work() for it, but it breaks DMAC/SSI register setting timing. Don't use schedule_work() on it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: fixup Gen2 module namingKuninori Morimoto
Gen2 has SCU, not SRU Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: non 0 is error on probeKuninori Morimoto
Some xxx_probe() returns not only -Exx, but also PTR_ERR(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove duplicate *priv from rsnd_dmaKuninori Morimoto
*priv pointer exists under rsnd_mod, and, it can get rsnd_mod pointer from rsnd_dma. remove duplicate rsnd_dma :: priv Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: explain SRC bypass mode settings in commentKuninori Morimoto
SRC bypass mode is useful for debugging. This patch explains SRC bypass mode settings in comment Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rename rsnd_scu_convert_rate_ctrl()Kuninori Morimoto
rsnd_scu_convert_rate_ctrl() is unclear naming, and there is "rsnd_scu_convert_rate" variable. These are confusable. it renamed to rsnd_scu_set_convert_rate() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove ssiu from ssi.cKuninori Morimoto
Now, SSI_MODE0/1 are controlled under scu.c ssiu is no longer needed on ssi.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: SSI_MODE0/1 settings goes to scu.cKuninori Morimoto
SRU (Gen1) / SCU (Gen2) / SSIU (Gen2) are controlled under scu.c. (SCU + SSIU (Gen2) was SRU (Gen1)) And register of SSI_MODE0/1 are mapped on these IP. But these have been implemented under ssi.c on this driver. The naming is very confusable, but it should be implemented under scu.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove pin sync optionKuninori Morimoto
Renesas Chip is supporting multi pin sound, but the HW setting is very difficult and confusable. But driver is supporting it halfway. Remove SYNC option at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rsnd_dai_is_clk_master() can be sharedKuninori Morimoto
Current rsnd driver is using ssi local rsnd_rdai_is_clk_master() for checking clock master. But it can be rsnd_dai_is_clk_master(), and share in each file Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: merge rsnd_scu_start/stop() and rsnd_scu_transfer_start/stop()Kuninori Morimoto
rsnd_scu_transfer_start/stop() are no longer needed. merge into rsnd_scu_start/stop() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove meaningless function parameterKuninori Morimoto
struct rsnd_priv *priv on rsnd_scu_init/start/stop() are no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add rsnd_scu_init(), and separate init/startKuninori Morimoto
Current scu.c has rsnd_scu_start(), and, operation of initialization/start are implemented in this function. This patch adds new rsnd_scu_init() and separates rsnd_scu_start(), since rsnd_mod_ops has .init/.start callbacks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-08 07:23:32 +0000