summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-02-26cnic: Update version to 2.1.1.Michael Chan
And update copyright to 2010. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Use union for the status blocks of different devices.Michael Chan
We only need to assign the status block address once and it also saves space in the structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Simplify route checking during iSCSI connection.Michael Chan
With a separate IP address for iSCSI, connections should proceed whether or not we can get a route to the target from the network stack. It is possible that the network IP address may not reach the iSCSI target. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Fix panic in cnic_iscsi_nl_msg_recv() when device is down.Michael Chan
Some data structures are freed when the device is down and it will crash if an ISCSI netlink message is received. Add RCU protection to prevent this. In the shutdown path, ulp_ops[CNIC_ULP_L4] is assigned NULL and rcu_synchronized before freeing the data structures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Finetune iSCSI connection reset.Eddie Wai
For bnx2 devices, always send notification to bnx2i to let it initiate the cleanup when RST is received. For bnx2x devices, add unsolicited RST_COMP handling to start the cleanup. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26cnic: Finetune iSCSI connection set up.Eddie Wai
Initialize IP ID and handle some additional connection errors. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: Do not allocate too many netdev txqueuesJohn Fastabend
Instead of allocating 128 struct netdev_queue per device, use the minimum value between 128 and the number of possible txq's, to reduce ram usage and "tc -s -d class shod dev .." output. This patch fixes Eric Dumazet's patch to set the TX queues to the correct minimum. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: do not stop tx queues in ixgbe_set_tsoJohn Fastabend
Disabling TSO can cause the dev_watchdog timer to be triggered because when TSO is disabled netif_tx_stop_all_queues is called. If the watchdog timer fires while the queues are stopped and traffic has not recently been sent on a paticular queue this is falsly identified as a hang and ndo_tx_timeout() is called. This is ocossionally seen during testing. This removes the netif_tx_stop_all_queues() it is not needed. The scheduler submits skb's with dev_hard_start_xmit(), this checks if netif_needs_gso and if so it calls dev_gso_segment. Disabling TSO will cause dev_hard_start_xmit() to do the gso processing. However ixgbe does not use the features flags to determine if it needs to use tso or not instead it uses skb->gso_size so ixgbe will process these frames correctly regardless of the netdev features flag. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ixgbe: Fix DMA mapping/unmapping issues when HWRSC is enabled on IOMMU ↵Mallikarjuna R Chilakala
enabled kernels Work around 82599 HW issue when HWRSC is enabled on IOMMU enabled kernels. 82599 HW is updating the header information after setting the descriptor to done, resulting DMA mapping/unmapping issues on IOMMU enabled systems. To work around the issue delay unmapping of first packet that carries the header information until end of packet is reached. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26greth: convert to netdev_tx_tkirjanov@gmail.com
Convert to netdev_tx_t Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26sis190: handle DMA mapping errorskirjanov@gmail.com
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26tc35815: Fix double locking on NAPIAtsushi Nemoto
Isolate spinlock for tx and rx to resolve double-locking. This is potential bug while this controller does not exist on any SMP platforms, but lockdep or rt-preempt reveals this bug. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26isa-skelton: Remove a wrong netif_wake_queue() callAtsushi Nemoto
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from net_tx(). So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger tx-ring overflow. This fix is ported from commit 662a96bd6f020782dfbdc0d0bd177c7dbb556687 ("tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON"). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26octeon: convert to use netdev_for_each_mc_addrJiri Pirko
Hmm so actually my original patch including this bit was correct, "list = list->next;" confused me :) - will send patch correcting that in a few. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part6Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part5 V2Jiri Pirko
removed some needless checks and also corrected bug in lp486e (dmi was passed instead of dmi->dmi_addr) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26can: netlink support for bus-error reporting and countersWolfgang Grandegger
This patch makes the bus-error reporting configurable and allows to retrieve the CAN TX and RX bus error counters via netlink interface. I have added support for the SJA1000. The TX and RX bus error counters are also copied to the data fields 6..7 of error messages when state changes are reported. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26drivers/net/myri10ge: Use pr_<level> and netdev_<level>Joe Perches
Add #define pr_fmt(fmt) Convert logging messages to pr_<level> and netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26drivers/net/chelsio: Use pr_<level>, netif_msg_<type>Joe Perches
Convert CH_<level> and CH_DBG uses to pr_<level> and netif equivalents Remove CH_<level> and CH_DBG macro definitions Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26isdn: remove ishexdigit() in regard to isxdigit()Andy Shevchenko
Samll cleanup in drivers/isdn/gigaset/capi.c where own implementation of isxdigit() has been changed to kernel native one. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26gigaset: reduce syslog clutterTilman Schmidt
Improve readability of the Gigaset driver's kernel messages by removing a few unnecessary messages and limiting the emission of some debug messages more narrowly. Impact: logging Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26bas_gigaset: collapse CR/LF at end of AT responseTilman Schmidt
Copy the mechanism from ser_/usb_gigaset to avoid producing spurious empty responses for CR/LF sequences from the device. Add a comment in all drivers documenting that behaviour. Correct an off by one error that might result in a one byte buffer overflow when receiving an unexpectedly long reply. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26gigaset: small documentation improvementTilman Schmidt
Clarify the non-support by isdnlog, and propose a better standard debug mask. Impact: Documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26KS8695: Don't call netif_carrier_off() from ndo_stop()Yegor Yefremov
netif_carrier_on() and netif_carrier_off() should be called from link status interrupt handler Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-24netfilter: xtables: reduce arguments to translate_tableJan Engelhardt
Just pass in the entire repl struct. In case of a new table (e.g. ip6t_register_table), the repldata has been previously filled with table->name and table->size already (in ip6t_alloc_initial_table). Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: optimize call flow around xt_ematch_foreachJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: replace XT_MATCH_ITERATE macroJan Engelhardt
The macro is replaced by a list.h-like foreach loop. This makes the code more inspectable. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: optimize call flow around xt_entry_foreachJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: replace XT_ENTRY_ITERATE macroJan Engelhardt
The macro is replaced by a list.h-like foreach loop. This makes the code much more inspectable. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23net: bug fix for vlan + gro issueAjit Khaparde
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23xfrm: clone mark when cloning policyJamal Hadi Salim
When we clone the SP, we should also clone the mark. Useful for socket based SPs. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23netfilter: xt_recent: fix false matchTim Gardner
A rule with a zero hit_count will always match. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23netfilter: xt_recent: fix buffer overflowTim Gardner
e->index overflows e->stamps[] every ip_pkt_list_tot packets. Consider the case when ip_pkt_list_tot==1; the first packet received is stored in e->stamps[0] and e->index is initialized to 1. The next received packet timestamp is then stored at e->stamps[1] in recent_entry_update(), a buffer overflow because the maximum e->stamps[] index is 0. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-23tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ONAtsushi Nemoto
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)Torgny Johansson
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23IPv6: better document max_addresses parameterBrian Haley
Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23MAINTAINERS: update mv643xx_eth maintenance statusLennert Buytenhek
I am no longer with Marvell. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: Fix DMA mapping error handling on RXAnton Blanchard
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: correct wrong coding style for "else"Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: Allow user space manipulation of SPD markJamal Hadi Salim
Add ability for netlink userspace to manipulate the SPD and manipulate the mark, retrieve it and get events with a defined mark, etc. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: Allow user space config of SAD markJamal Hadi Salim
Add ability for netlink userspace to manipulate the SAD and manipulate the mark, retrieve it and get events with a defined mark. MIGRATE may be added later. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SP lookups with markJamal Hadi Salim
Allow mark to be used when doing SP lookup Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SP lookups signature with markJamal Hadi Salim
pass mark to all SP lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups with markJamal Hadi Salim
Allow mark to be added to the SA lookup Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: introduce basic mark infrastructureJamal Hadi Salim
Add basic structuring and accessors for xfrm mark Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>