summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-03-02OMAP: DSS2: Taal: Fix TE when resumingTomi Valkeinen
TE was not initialized properly on power on, which broke TE when resuming from suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-01OMAP: DSS2: Taal: Fix ESD checkTomi Valkeinen
Using taal_enable_te() when DSI bus was locked caused a deadlock. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-01OMAP: DSS2: OMAPFB: Constify some function parametersVille Syrjälä
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-01OMAP: DSS2: OMAPFB: install omapfb.hVille Syrjälä
omapfb has several custom ioctls so user space needs the header in order to utilize them. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-26OMAP: DSS2: DSI: add error printsTomi Valkeinen
Add error printing for dsi_vc_dcs_write() and dsi_vc_dcs_read(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-26OMAP: DSS2: TPO-TD03MTEA1: fix function namesTomi Valkeinen
Copy/paste had resulted in wrong function names in TPO TD043MTEA1 panel driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-25OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen
Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATETomi Valkeinen
Remove the option for forcing auto-update. Auto-update for manual update displays is no more a DSS feature, so if a particular display devices does have auto-update mode, it should be in display's custom settings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: DSI: remove external TE supportTomi Valkeinen
With the reworked model, DSI driver doesn't need to know anything about external TE lines. Thus we can remove ext_te support, and only leave the DSI TE trigger support. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move timing functionsTomi Valkeinen
Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_wss()Tomi Valkeinen
Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen
Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move update() and sync()Tomi Valkeinen
Move update() and sync() from omap_dss_device to omap_dss_driver. Also, update was hardcoded to use virtual channel 0. This patch adds a parameter that specifies the VC. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen
Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/get_te()Tomi Valkeinen
Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_recommended_bpp()Tomi Valkeinen
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_resolution()Tomi Valkeinen
Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen
Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move wait_vsync()Tomi Valkeinen
Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get/set_rotate()Tomi Valkeinen
Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_mirror()Tomi Valkeinen
Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move memory_read()Tomi Valkeinen
Move memory_read() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move run_test()Tomi Valkeinen
Move run_test() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: DSI: remove auto-update perf measurementTomi Valkeinen
Remove performance measurement for auto-update. Auto-update and thus performance measurement cannot be supported after the driver change where the control is moved to display drivers. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: DSI: change DSI bus_lock to semaphoreTomi Valkeinen
Physical DSI bus is protected by a mutex. This patch changed the mutex to a semaphore, so that we can lock and unlock the bus_lock from different threads. This is needed as the update process is started by user space program, and thus the lock is acquired in that context, but the lock can be released in different context, a work thread via irq. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-23OMAP: DSS2: fix get_dsi/dispc_clk_source() usageTomi Valkeinen
After changing the selection of DSI and DISPC clock source the users of get_dsi/dispc_clk_source() functions were left unchanged. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: OMAPFB: fix cleanup on dssdev enable errorTomi Valkeinen
If enabling a dss device failed, omapfb didn't exit, leading to crash. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: OMAPFB: fix dssdev cleanup on errorTomi Valkeinen
If there was a dss device without a driver and thus omapfb probe failed, ref counts could be left to dss devices. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: fix driver probe error handlingTomi Valkeinen
If driver's probe failed, the uninit was not called. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: remove sub-panel systemTomi Valkeinen
The system to allow panel drivers to exists as attached to ctrl drivers did never work very well. It is not useed, and this patch removes it to make the driver cleaner. For now, controller drivers need to include also the panel driver code. In the future a proper mechanism for this should be developed, perhaps by creating busses for controllers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: Check ctx loss count only when starting the first clockTomi Valkeinen
When OMAP PM layer is no-op/debug, the PM layer will increment context loss count with every call. This resulted DSS2 to restore context whenever a clock was enabled. This commit checks the context loss count only when the context actually could have been lost, ie. when enabling a clock when no clocks had been previously enabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: remove dsi_vc_print_status()Tomi Valkeinen
It was not used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: configure all DSI VCsTomi Valkeinen
Instead of configuring only VC0 to be usable, configure all four VCs similarly. This is needed to utilize the other VCs. Setting the FIFO sizes evenly for all VCs, regardless of how many VCs are actually used, is not optimal. However, this affects only cases when larger amounts of data are written or read via L4, meaning that normal use cases are not affected. At some point this could be optimized better to suit different use cases. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: export dsi_vc_enable_hs()Tomi Valkeinen
Rename and export dsi_vc_enable_hs() so that the display drivers can control the mode of the DSI link. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: add helpers for DCS read/writeTomi Valkeinen
Add helper functions for most common DCS read and write operations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: add dsi_bus_is_locked()Tomi Valkeinen
Helper function to clean up the checking of the bus lock. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: improve DSS clk src selectionTomi Valkeinen
dss_select_clk_source() was rather confusing. Selecting the source with enums is much clearer. The clk source selection is also stored into memory, so that we know what is the selected source, even when clocks are off. This is important during setup, as we need to what clocks to turn on before the clocks are turned on. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: OMAPFB: Add omapfb_update_window prototypeTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: fix irq-stats compilationTomi Valkeinen
Fix compilation of the CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS feature. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: OMAPFB: implement OMAPFB_GET_DISPLAY_INFOTomi Valkeinen
Previously the only place to get the size of the display was from the DSS's sysfs interface, making, for example, configuring overlays and doing updates on manual displays more difficult. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: DSS: Taal: fix error returns in taal_probe()Aaro Koskinen
The workqueue creation error branch attempted to destroy a NULL wq, and, in turn, a failed registration does not destroy the newly created workqueue. The problem was reported by a static analysis tool. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: 3430SDP: remove vdvi regulatorTomi Valkeinen
The regulator is now enabled by DSS driver, and thus the panel driver doesn't need to touch it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: DSS2: enable VDDS_DSI when using DPITomi Valkeinen
It looks like on OMAP3 some DSS pins need VDDS_DSI to function properly. This has not been confirmed from TI, but looking at figure 15-1 "Display subsystem highlight" from the TRM, some data pins come near the DSI and SDI blocks. This is not very hard evidence, but the fact remains that with the power on, pixels are ok, and with the power off, pixels are not ok. It may also be that VDDS_SDI is needed to power some pins, but as normally both VDDS_SDI and VDDS_DSI come from the same power source, this hasn't been shown. It seems that a single driver can only get a regulator once. This patch solves it by getting all the required regulators in one place, and from which the submodules then get the regulators they need. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12omapfb: lcd_ams_delta: add support for contrast controlJanusz Krzysztofik
The patch extends the Amstrad Delta LCD panel driver with optional support for changing contrast using standard LCD class device API instead of setting it silently to a default value at panel enable. It also allows for lowering power consumption by turning off OMAP_PWL_CLK_ENABLE via lcd_ops.set_power callback. Created and tested against linux-omap for-next, commit 155a75d9725e66e5ec8a383822957dee52427057. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12omapfb: Fix 12-bit display (RGB444 color mode) handlingJanusz Krzysztofik
Support for RGB444 (12-bit) pixel format has been introduced into omapfb/lcdc by Mark Underwood on 2006-05-26 (commit f74edb6668aad9fc8e81585861b18f996c78a574) in preparation for Amstrad Delta (E3) videophone LCD display support. Before the Amstrad Delta LCD patch by Jonathan McDowell was applied (on 2006-08-04, commit 8d22fb2ea004cdb6379b54c1a8fd1546cfe40ed7), omapfb and lcdc code was changed substantially (commit e563dc81aa01bd8bbb01bc53975a15c398715f62 dated 2006-06-26) in a way that broke Mark's 12-bit display support. Than, a patch by Jonathan, that supposed to correct the problem, was introduced immediatelly (on 2006-08-04, commit e10a75b49e7a57ae17c28b705153c70eba15a8ef). As a result, the Amstrad Delta display was working correctly at boot time, with fbset reporting: geometry 480 320 480 320 16 ... rgba 4/8,4/4,4/0,0/0 However, after first framebuffer reinitialization, colors were no longer being displayed correctly and fbset was reporting: rgba 5/11,6/5,5/0,0/0 The patch tries to correct the issue by setting plane->color_mode depending on panel->bpp, not var->bits_per_pixel. Created and tested on Amstrad Delta against linux-2.6.33-rc3. Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: DSS2: Improve Kconfig help textsTomi Valkeinen
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: DSS: add TPO TD043MTEA1 panelGrazvydas Ignotas
Add support of TPO TD043MTEA1 TFT LCD panel to DSS2 driver. This panel is used by OMAP3 Pandora device. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: DSS2: add Toppoly TDO35S panelMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-08OMAP: DSS2: Add Sharp LQ043T1DG01 panel driverVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-01-12OMAP: DSS2: OMAPFB: fix crash when panel driver was not loadedTomi Valkeinen
If the panel's probe had failed, omapfb would still go on, eventually crashing. A better fix would be to handle each display properly, and leaving just the failed display out. But that is a bigger change. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>