summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-25ARM: S3C64XX: Ensure s3c64xx_ide_setup_gpio() is prototypedMark Brown
Since it's exported we should make sure we're using the prototype others see. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototypedMark Brown
Since it's exported we should make sure we're using the prototype others see. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Update Kconfig and Makefile for supporting CPUFREQ driverJaecheol Lee
This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210, and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add support CPUFREQJaecheol Lee
This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling). Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add Register definition for CMUJaecheol Lee
This patch adds some CMU(Clock Management Unit) registers for supporting CPUFREQ and some drivers. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add MOUT_DMC0 and SCLK_DMC0 clocksJaecheol Lee
This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock in CPUFREQ driver. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Add struct clk_ops for clk_fout_apllJaecheol Lee
Current fout_apll has fixed rate value. So CPUFREQ driver gets incorrect value when finding current CPU frequency. Because some operation level need to change APLL. Added get_rate function for fout_apll can give correct frequency value when calling get_rate function. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Add I2C channel 3, 4, 5, 6, and 7 device supportKyungmin Park
S5PV310 and S5PC210 support more I2C devices than previous SoCs. Add the device support code for them. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Define address & interrupt for all I2C blocksKyungmin Park
S5PV310 and S5PC210 support total 8 (+ 1 dedicated for HDMI) I2C devices. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV210: Fix wrong interrupt I2C2 and I2C3 numberKyungmin Park
The name of the I2C2 and I2C3 interrupt should be IIC2 and IIC3 instead of CAN0 and CAN1. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PC100: Change I2C2 and I2C3 IRQ namesKukjin Kim
This patch changes I2C2 and I2C3 interrupt name from IRQ_CANX to IRQ_IICX according other SoCs' I2C interrupt naming rule. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5P: Cleanup the S5P SoCs' VA address mappingKukjin Kim
Basically S5P SoCs use the Samsung common VA address mapping where plat-samsung and use plat-s5p's mapping also. The later is a little mess. So this patch cleans it up. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: I2C0/1 devices support on Universal boardKyungmin Park
Camera devices use the I2C0 and Gyro uese the I2C1 on universal board. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Universal OneNAND supportKyungmin Park
OneNAND device support for Universal board. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: SAMSUNG: Add clock types into platform dataJeongbae Seo
This patch adds clock types into platform data to support external clock divider instead of internal clock divider. It is defined that what kinds of clock type is used in machine. Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: SAMSUNG: Modified to change of bus width and host capsHyuk Lee
This patch adds to change bus width and host capability of HSMMC, when HSMMC is only configured with another value of bus width and host capability from default one. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Add support HSMMC on SMDKV310 and SMDKC210Hyuk Lee
This patch adds support HSMMC for S5PV310(SMDKV310) and S5PC210(SMDKC210). Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Add HSMMC platform dataHyuk Lee
This patch adds initialization HSMMC device information. And HSMMC platform data like card detect, data bus width and capability is configured. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PV310: Add support HSMMC and SDHCI configurationHyuk Lee
This patch adds support HSMMC for S5PV310 and S5PC210 and setup for HSMMC host controller and also related GPIO. At most 4 channel can be used at the same time. A user can configure SDHCI data bus as 8bit or 4bit. Signed-off-by: Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25ARM: S5PC100: Cleanup the GPIOlib codeKukjin Kim
This patch clean up the GPIO code and removes useless GPIO addresses. It can be calculated with offset, the 'base' member of s3c_gpio_chip is also initialized in the init function. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25Merge branch 'next-gpio-update' into for-nextKukjin Kim
2010-10-25ARM: S5P: Fix missed IRQ_EINT_BIT()Kukjin Kim
When merged patches, missed IRQ_EINT_BIT() definition from commit ea31fd43 (ARM: S5PV210: Add Power Management Support). The IRQ_EINT_BIT() is used in the Power Management operation (plat-samsung/pm.c). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Fix special function for IISv4 portMark Brown
When converting to use s3c_gpio_cfgpin_range() the function for the IISv4 block appears to have been typoed as 4 (the keypad) rather than 5 as it should be. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgrange_nopull()Kukjin Kim
This patch changes code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgrange_nopull()Ben Dooks
Change code setting special-function and no pull-up to use the s3c_gpio_cfgrange_nopull() wrapper. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add s3c_gpio_cfgrange_nopull() helperBen Dooks
A number of the SDHCI code configure a GPIO to a special function and remove any pull-up, so add s3c_gpio_cfgrange_nopull() as a wrapper to the s3c_gpio_cfgall_range() to make the code that calls it fit on one line. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: 2nd Change to using s3c_gpio_cfgall_range()Kukjin Kim
This patch changes the code setting range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV310: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P6442: Change to using s3c_gpio_cfgall_range()Kukjin Kim
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgall_range()Ben Dooks
Change the code setting a range of GPIO pins' configuration and pull state to use the recently introduced s3c_gpio_cfgall_range(). Mop up a few missed s3c_gpio_cfgpin_range() changes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fix small comments] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add s3c_gpio_cfgall_range() functionBen Dooks
Add a function to configure a range of GPIOs function and pull in one go, mainly for the SDHCI and framebuffer helpers which tend to do this. Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fix small comments] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV310: Change to using s3c_gpio_cfgpin_range()Kukjin Kim
This patch changes the code setting ranges of GPIO pins in mach-s5pv310 using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PV210: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: coding-style fixes] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5PC100: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: Fixed wrong change] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: 2nd Change to using s3c_gpio_cfgpin_range()Kukjin Kim
This patch changes the code setting ranges of GPIO pins in mach-s5p64x0 using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). NOTE: This is for missed things from the previous patch. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P64X0: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: modified to s5p64x0 from s5p6440] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S5P6442: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> [kgene.kim@samsung.com: fixed wrong change] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change to using s3c_gpio_cfgpin_range()Ben Dooks
Change the code setting ranges of GPIO pins using s3c_gpio_cfgpin() to use the recently introduced s3c_gpio_cfgpin_range(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: S3C64XX: Change dev-audio.c to use S3C_GPIO_SFN() for special functionsBen Dooks
To aide in changing the gpio code, remove the use of pin-specific configs and move to using the S3C_GPIO_SFN() versions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-23ARM: SAMSUNG: Add GPIO configuration for a range of pinsBen Dooks
Add s3c_gpio_cfgpin_range() to configure a range of pins to the given value. This is useful for a number of blocks where the pins are in order and saves multiple calls to s3c_gpio_cfgpin(). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 20:02:13 +0000