summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-08-14pcm038: mux configuration for predefined gpio lineLuotao Fu
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-08-14MX31 Fix spi clock namesSascha Hauer
Fix the SPI clock names to match the device names. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mx3x: Fixup USB base addressesSascha Hauer
The i.MX31 and the i.MX35 have different USB base addresses. Adjust the resources accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mx27: add support for phytec pca100 (phyCARD-s) boardLuotao Fu
Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14i.MX35 clock support: Add USB clocksSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MX31: add spi controller devices/resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MX2: Add SPI devices/resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mx31moboard: move usb otg support back to moboard common fileValentin Longchamp
since all boards finally have this device Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mx31moboard: added usb xcvr reset for mx31moboardValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mx31: added one more pin definitionValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: add iomux pins configuration support for MXC91231Dmitriy Taychenachev
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: add basic MXC91231 supportDmitriy Taychenachev
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14i.MX25 iomux definitions (corrected version)Lothar Waßmann
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14fix mx35 wrong clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14Freescale i.MX25 PDK (3ds) board supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14Add i.MX25 supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14mxc pwm: add mx25 supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14iomux-v3: Allow for a runtime base addressSascha Hauer
also, check for a valid pad_ctrl_ofs before changing the pad control register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: i.MX25 timer supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14MXC: use variable for irq controller base in entry-macro.SSascha Hauer
This allows us to determine the irq controller base address on runtime. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14ARM: MX3: add ckil clockDaniel Mack
The CKIL clock source is used by the upcoming RTC driver, so we need to export it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14ARM: mxc: Fix i2c_board_info definitionsSascha Hauer
Fix i2c_board_info definitions - we were defining the 'type' field of these structures twice since the first argument of I2C_BOARD_INFO sets this field. Move the second definition into I2C_BOARD_INFO(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org>
2009-08-07Add support for Eukrea's MBIMX27Eric Benard
MBIMX27 is the evaluation board for CPUIMX27 and integrates : a QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to SDHC1. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07Add support for Eukrea's CPUIMX27Eric Benard
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR, it includes an ethernet PHY in MII mode, an I2C RTC and a ST16554 QuadUART on nCS3. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX27: Add USB platform devices and resourcesjavier Martin
This adds clocks and resources for usb in i.mx27 SoC. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX3: add additional USB pins to iomuxDaniel Mack
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07ehci mxc: Fix clocksSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MX3: Add USB platform devices and resourcesDaniel Mack
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07[ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEVSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07[ARM] MXC: Switch MX1 to clkdev supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC PLL decoding: calculate mfn value with less magicSascha Hauer
Also, use cpu_is_* macros rather than CONFIG_ARCH_* Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC: pwm driver fixesSascha Hauer
- fix off-by-one error in divider calculation - disable pwm in pwm_disable Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC gpio interrupt support: move register definitions to .c fileSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc gpio: CONFIG_ARCH_* -> cpu_is_*()Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07pcm038: Add support for SJA1000 on baseboardSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07pcm037: Add support for SJA1000 on baseboardSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07imxfb: Add support for multiple displaysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07imxfb: use resource_size() macroSascha Hauer
This fixes an off-by-one error. Also, use dev_err instead of printk in probe() function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07imxfb: calculate bpix value from bits_per_pixelSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx1: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx3: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx2: Codingstyle: Let the compiler count arraysSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mx2: remove mxc_irda platform deviceSascha Hauer
Irda support is handled by the normal ims serial driver, so we do not need this device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC iomux-v3: Fix defines for PAD_CTL registersSascha Hauer
The old defines leaked in from an old version of the patch. Change the defines to match the register layout of the iomuxer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: turn to soc specific init_irq functionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: remove do not include directlySascha Hauer
Everyone should be free to include the files he actually needs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07i.MX serial: do not use #ifdef CONFIG_ARCH_*Sascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC: remove board specific setup of MXC_LL_UART_[PV]ADDRSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07MXC uncompress macros: determine uart base by machine typeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07mxc: remove ARCH_NR_GPIOSSascha Hauer
Use the default value of 256 which is enough for all i.MX SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 16:19:29 +0000