summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-08-05Input: wistron_btns - support Prestigio Wifi RF kill buttonTJ
The Prestigio 157, an old no-name clone laptop uses input keys very similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled wireless radio frequency kill switch. This patch adds support for the RF kill switch control and adds manual identification of the model. The Prestigio does not expose any recognisable identity via dmidecode and so requires manual selection at module init using force=1 keymap=prestigio Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-06drm/radeon/kms: Fix caching mode selection for GTT objectJerome Glisse
GTT object can either be cached,uncached or wc just let core ttm pick the best mode according to how the bo driver and GTT memory type was initialized. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-06ftrace: Fix perf-tracepoint OOPSPeter Zijlstra
Not all tracepoints are created equal, in specific the ftrace tracepoints are created with TRACE_EVENT_FORMAT() which does not generate the needed bits to tie them into perf counters. For those events, don't create the 'id' file and fail ->profile_enable when their ID is specified through other means. Reported-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1249497664.5890.4.camel@laptop> [ v2: fix build error in the !CONFIG_EVENT_PROFILE case ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-06rtmutex: Avoid deadlock in rt_mutex_start_proxy_lock()Darren Hart
In the event of a lock steal or owner died, rt_mutex_start_proxy_lock() will give the rt_mutex to the waiting task, but it fails to release the wait_lock. This leads to subsequent deadlocks when other tasks try to acquire the rt_mutex. I also removed a few extra blank lines that really spaced this routine out. I must have been high on the \n when I wrote this originally... Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> LKML-Reference: <4A79D7F1.4000405@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05Add IDs for 3C905B-TX Fast Etherlink XL PCIPascal Terjan
We found this old card which was not supported, and physically looks similar to the other 3C905B we have (9055). After adding the IDs it seems to work fine (MII report, dhcp, scp, ...) Acked-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05tracing: do not use functions starting with .L in recordmcount.plSteven Rostedt
On Wed, 5 Aug 2009, Ingo Molnar wrote: > * Dave Airlie <airlied@gmail.com> wrote: > > > Hey, > > > > So I spent 3-4 hrs today (I'm stupid yes) tracking down a .o > > breakage by blaming rawhide gcc/binutils as I was using make > > V=1and seeing only the compiler chain running, > > Hm, is this that powerpc related build bug you just reported? Well we tracked it down and it is powerpc64 specific. Seems that in drivers/hwmon/lm93.c there's a function called: LM93_IN_FROM_REG() But PPC64 has function descriptors and the real function names (the ones you see in objdump) start with a '.'. Thus this in objdump you have: Disassembly of section .text: 0000000000000000 <.LM93_IN_FROM_REG>: 0: 7c 08 02 a6 mflr r0 4: fb 81 ff e0 std r28,-32(r1) The function name used is .LM93_IN_FROM_REG. But gcc considers symbols that start with ".L" as a special symbol that is used inside the assembly stage. The nm passed into recordmcount uses the --synthetic option which shows the ".L" symbols (my runs outside of the build did not include the --synthetic option, so my older patch worked). We see the function as a local. Now to capture all the locations that use "mcount" we need to have a reference to link into the object file a list of mcount callers. We need a reference that will not disappear. We try to use a global function and if that does not work, we use a local function as a reference. But to relink the section back into the object, we need to make it global. In this case, we run objcopy using --globalize-symbol and --localize-symbol to convert the symbol into a global symbol, link the mcount list, then convert it back to a local symbol. This works great except for this case. .L* symbols can not be converted into a global symbol, and the mcount section referencing it will remain unresolved. Reported-by: Dave Airlie <airlied@gmail.com> LKML-Reference: <alpine.DEB.2.00.0908052011590.5010@gandalf.stny.rr.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-05ring-buffer: do not disable ring buffer on oops_in_progressSteven Rostedt
The commit: commit e0fdace10e75dac67d906213b780ff1b1a4cc360 Author: David Miller <davem@davemloft.net> Date: Fri Aug 1 01:11:22 2008 -0700 debug_locks: set oops_in_progress if we will log messages. Otherwise lock debugging messages on runqueue locks can deadlock the system due to the wakeups performed by printk(). Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Will permanently set oops_in_progress on any lockdep failure. When this triggers it will cause any read from the ring buffer to permanently disable the ring buffer (not to mention no locking of printk). This patch removes the check. It keeps the print in NMI which makes sense. This is probably OK, since the ring buffer should not cause something to set oops_in_progress anyway. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-05ring-buffer: fix check of try_to_discard resultSteven Rostedt
The function ring_buffer_discard_commit inversed the code path of the result of try_to_discard. It should skip incrementing the entry counter if try_to_discard succeeded. But instead, it increments the entry conder if it succeeded to discard, and does not increment it if it fails. The result of this bug is that filtering will make the stat counters incorrect. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-05ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>Hartley Sweeten
<linux/clk.h> should be included to get the base API prototypes. This fixes the following sparse warnings: arch/arm/common/clkdev.c:65:12: warning: symbol 'clk_get_sys' was not declared. Should it be static? arch/arm/common/clkdev.c:79:12: warning: symbol 'clk_get' was not declared. Should it be static? arch/arm/common/clkdev.c:87:6: warning: symbol 'clk_put' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCHHartley Sweeten
preserve_crunch_context() calls __copy_to_user() which expects the destination address to be in __user space. setup_sigframe() properly passes the destination address. restore_crunch_context() calls __copy_from_user() which expects the source address to be in __user space. restore_sigframe() properly passes the source address. This fixes {preserve/restore}_crunch_context() to accept the address as __user space and resolves the following sparse warnings: arch/arm/kernel/signal.c:146:31: warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:1>*to got struct crunch_sigframe *frame arch/arm/kernel/signal.c:156:38: warning: incorrect type in argument 2 (different address spaces) expected void const [noderef] <asn:1>*from got struct crunch_sigframe *frame arch/arm/kernel/signal.c:250:48: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> arch/arm/kernel/signal.c:365:49: warning: incorrect type in argument 1 (different address spaces) expected struct crunch_sigframe *frame got struct crunch_sigframe [noderef] <asn:1>*<noident> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in driversAndrew Victor
Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer to a KS8695_CLOCK_RATE. Issue pointed out by Russell King on arm-linux-kernel mailing list. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05phonet: phonet_device_get() fixEric Dumazet
net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05drm/i915: Fix read outside array bounds in restoring the SWF10 range.Roel Kluin
dev_priv->saveSWF1 is a 16 element array, but this reads up to index 22, and restored values from the wrong registers. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-05drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-05dccp: missing destroy of percpu counter variable while unload moduleWei Yongjun
percpu counter dccp_orphan_count is init in dccp_init() by percpu_counter_init() while dccp module is loaded, but the destroy of it is missing while dccp module is unloaded. We can get the kernel WARNING about this. Reproduct by the following commands: $ modprobe dccp $ rmmod dccp $ modprobe dccp WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c() Hardware name: VMware Virtual Platform list_add corruption. next->prev should be prev (c080c0c4), but was (null). (next =ca7188cc). Modules linked in: dccp(+) nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc Pid: 1956, comm: modprobe Not tainted 2.6.31-rc5 #55 Call Trace: [<c042f8fa>] warn_slowpath_common+0x6a/0x81 [<c053a6cb>] ? __list_add+0x27/0x5c [<c042f94f>] warn_slowpath_fmt+0x29/0x2c [<c053a6cb>] __list_add+0x27/0x5c [<c053c9b3>] __percpu_counter_init+0x4d/0x5d [<ca9c90c7>] dccp_init+0x19/0x2ed [dccp] [<c0401141>] do_one_initcall+0x4f/0x111 [<ca9c90ae>] ? dccp_init+0x0/0x2ed [dccp] [<c06971b5>] ? notifier_call_chain+0x26/0x48 [<c0444943>] ? __blocking_notifier_call_chain+0x45/0x51 [<c04516f7>] sys_init_module+0xac/0x1bd [<c04028e4>] sysenter_do_call+0x12/0x22 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05netxen: fix dma mask update calculationDhananjay Phadke
Fix dma mask calculation that caps at 63-bit addressing even when firmware advertises full 64-bit support. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05OMAP3: Overo: add missing pen-down GPIO definitionKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP: GPIO: clear/restore level/edge detect settings on mask/unmaskKevin Hilman
If IRQ triggering is enabled, it can trigger a pending interrupt even for masked interrupts. Any pending GPIO interrupts can prevent the powerdomain from hitting retention. Problem found, reported and additional review and testing by Chunquiu Wang. Tested-by: Chunquiu Wang <cqwang@motorola.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: Fix wrong sequence in suspend.Jouni Hogander
Powerdomain previous state is checked after restoring new states in suspend. This patch fixes this problem. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP: PM: CPUfreq: obey min/max settings of policyEero Nurkkala
Use the min/max settings from CPUfreq policy rather than processor defined min/max settings. Without this patch, it's possible to scale frequency outside the current policy range. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP2/3/4: UART: allow in-order port traversalKevin Hilman
Use list_add_tail() when adding discovered UART ports. This is so traversal using list_for_each_entry() will traverse the list in the order they were found. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial portsKevin Hilman
This patch causes the OMAP uarts to honor the sysfs power/wakeup file for IOPAD wakeups. Before the OMAP was always woken up from off mode on a rs232 signal change. This patch also creates a different platform device for each serial port so that the wakeup properties can be control per port. By default, IOPAD wakeups are enabled for each UART. To disable, # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup Where serial8250.0 can be replaced by .1, or .2 to control the other ports. Original idea and original patch from Russ Dill <russ.dill@gmail.com> Cc: Russ Dill <russ.dill@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: Fixed crash bug with serial + suspendTero Kristo
It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP4: UART: cleanup special case IRQ handlingKevin Hilman
Streamline the OMAP4 special IRQ assignments by putting inside normal init loop instead of having a separate loop. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: Do not build suspend code if SUSPEND is not enabledKevin Hilman
Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: prevent module wakeups from waking IVA2Kevin Hilman
By default, prevent functional wakeups from inside a module from waking up the IVA2. Let DSP Bridge code handle this when loaded. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: Clear pending PRCM reset flags on initKevin Hilman
Any pending reset flags can prevent retention. Ensure they are all cleared during boot. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: Ensure PRCM interrupts are cleared at bootKevin Hilman
Any pending PRCM interrupts can prevent retention. Ensure they are cleared during boot. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: PM: CM_REGADDR macros using wrong nameKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP2/3: PM: make PM __init calls staticKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05net: Fix spinlock use in alloc_netdev_mq()Ingo Molnar
-tip testing found this lockdep warning: [ 2.272010] calling net_dev_init+0x0/0x164 @ 1 [ 2.276033] device class 'net': registering [ 2.280191] INFO: trying to register non-static key. [ 2.284005] the code is fine but needs lockdep annotation. [ 2.284005] turning off the locking correctness validator. [ 2.284005] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip #1145 [ 2.284005] Call Trace: [ 2.284005] [<7958eb4e>] ? printk+0xf/0x11 [ 2.284005] [<7904f83c>] __lock_acquire+0x11b/0x622 [ 2.284005] [<7908c9b7>] ? alloc_debug_processing+0xf9/0x144 [ 2.284005] [<7904e2be>] ? mark_held_locks+0x3a/0x52 [ 2.284005] [<7908dbc4>] ? kmem_cache_alloc+0xa8/0x13f [ 2.284005] [<7904e475>] ? trace_hardirqs_on_caller+0xa2/0xc3 [ 2.284005] [<7904fdf6>] lock_acquire+0xb3/0xd0 [ 2.284005] [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<79591514>] _spin_lock_bh+0x2d/0x5d [ 2.284005] [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<79489678>] alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<793a38f2>] ? loopback_setup+0x0/0x74 [ 2.284005] [<798eecd0>] loopback_net_init+0x20/0x5d [ 2.284005] [<79483efb>] register_pernet_device+0x23/0x4b [ 2.284005] [<798f5c9f>] net_dev_init+0x115/0x164 [ 2.284005] [<7900104f>] do_one_initcall+0x4a/0x11a [ 2.284005] [<798f5b8a>] ? net_dev_init+0x0/0x164 [ 2.284005] [<79066f6d>] ? register_irq_proc+0x8c/0xa8 [ 2.284005] [<798cc29a>] do_basic_setup+0x42/0x52 [ 2.284005] [<798cc30a>] kernel_init+0x60/0xa1 [ 2.284005] [<798cc2aa>] ? kernel_init+0x0/0xa1 [ 2.284005] [<79003e03>] kernel_thread_helper+0x7/0x10 [ 2.284078] device: 'lo': device_add [ 2.288248] initcall net_dev_init+0x0/0x164 returned 0 after 11718 usecs [ 2.292010] calling neigh_init+0x0/0x66 @ 1 [ 2.296010] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs it's using an zero-initialized spinlock. This is a side-effect of: dev_unicast_init(dev); in alloc_netdev_mq() making use of dev->addr_list_lock. The device has just been allocated freshly, it's not accessible anywhere yet so no locking is needed at all - in fact it's wrong to lock it here (the lock isnt initialized yet). This bug was introduced via: | commit a6ac65db2329e7685299666f5f7b6093c7b0f3a0 | Date: Thu Jul 30 01:06:12 2009 +0000 | | net: restore the original spinlock to protect unicast list Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05perf report: Add missing command line options to man pageArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090805130453.GC10688@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOsRoger Quadros
gpio_get() should return DATAIN register value when the GPIO is configured as input whereas it should return DATAOUT register value when the GPIO is configured as output. Now /sys/kernel/debug/gpio shows proper values for output GPIOs Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-05perf: Auto-detect libbfdPeter Zijlstra
Since the C++ demangling isn't needed for everybody and bfd/iberty aren't widely/easily available on all machines, make it optional. It also allows you to forcefully disable demangling by using NO_DEMANGLE=1 and otherwise tries to detect libbfd/libiberty combinations that result in a compiling demangler. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> LKML-Reference: <20090801082048.GX12579@kernel.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05KVM: ia64: fix build failures due to ia64/unsigned long mismatchesAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpcStephen Rothwell
Eliminates this compiler warning: arch/powerpc/kvm/../../../virt/kvm/kvm_main.c:1178: error: integer overflow in expression Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05perf report: Make --sort comm,dso,symbol the defaultPekka Enberg
If you're doing performance testing, you're interested in the symbols anyway so lets make "--sort comm,dso,symbol" the default sort option. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: acme@redhat.com LKML-Reference: <1249467921-10450-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05KVM: fix ack not being delivered when msi presentMichael S. Tsirkin
kvm_notify_acked_irq does not check irq type, so that it sometimes interprets msi vector as irq. As a result, ack notifiers are not called, which typially hangs the guest. The fix is to track and check irq type. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: s390: fix wait_queue handlingChristian Borntraeger
There are two waitqueues in kvm for wait handling: vcpu->wq for virt/kvm/kvm_main.c and vpcu->arch.local_int.wq for the s390 specific wait code. the wait handling in kvm_s390_handle_wait was broken by using different wait_queues for add_wait queue and remove_wait_queue. There are two options to fix the problem: o move all the s390 specific code to vcpu->wq and remove vcpu->arch.local_int.wq o move all the s390 specific code to vcpu->arch.local_int.wq This patch chooses the 2nd variant for two reasons: o s390 does not use kvm_vcpu_block but implements its own enabled wait handling. Having a separate wait_queue make it clear, that our wait mechanism is different o the patch is much smaller Report-by: Julia Lawall <julia@diku.dk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: VMX: Fix locking imbalance on emulation failureJan Kiszka
We have to disable preemption and IRQs on every exit from handle_invalid_guest_state, otherwise we generate at least a preempt_disable imbalance. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: VMX: Fix locking order in handle_invalid_guest_stateJan Kiszka
Release and re-acquire preemption and IRQ lock in the same order as vcpu_enter_guest does. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in ↵Marcelo Tosatti
kvm_mmu_change_mmu_pages kvm_mmu_change_mmu_pages mishandles the case where n_alloc_mmu_pages is smaller then n_free_mmu_pages, by not checking if the result of the subtraction is negative. Its a valid condition which can happen if a large number of pages has been recently freed. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: SVM: force new asid on vcpu migrationMarcelo Tosatti
If a migrated vcpu matches the asid_generation value of the target pcpu, there will be no TLB flush via TLB_CONTROL_FLUSH_ALL_ASID. The check for vcpu.cpu in pre_svm_run is meaningless since svm_vcpu_load already updated it on schedule in. Such vcpu will VMRUN with stale TLB entries. Based on original patch from Joerg Roedel (http://patchwork.kernel.org/patch/10021/) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: x86: verify MTRR/PAT validityMarcelo Tosatti
Do not allow invalid memory types in MTRR/PAT (generating a #GP otherwise). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: PIT: fix kpit_elapsed division by zeroMarcelo Tosatti
Fix division by zero triggered by latch count command on uninitialized counter. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05KVM: Fix KVM_GET_MSR_INDEX_LISTJan Kiszka
So far, KVM copied the emulated_msrs (only MSR_IA32_MISC_ENABLE) to a wrong address in user space due to broken pointer arithmetic. This caused subtle corruption up there (missing MSR_IA32_MISC_ENABLE had probably no practical relevance). Moreover, the size check for the user-provided kvm_msr_list forgot about emulated MSRs. Cc: stable@kernel.org Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05x86: Fix VMI && stack protectorAlok Kataria
With CONFIG_STACK_PROTECTOR turned on, VMI doesn't boot with more than one processor. The problem is with the gs value not being initialized correctly when registering the secondary processor for VMI's case. The patch below initializes the gs value for the AP to __KERNEL_STACK_CANARY. Without this the secondary processor keeps on taking a GP on every gs access. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: <stable@kernel.org> # for v2.6.30.x LKML-Reference: <1249425262.18955.40.camel@ank32.eng.vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-05intel-iommu: Mask physical address to correct page size in intel_map_single()Fenghua Yu
The physical address passed to domain_pfn_mapping() should be rounded down to the start of the MM page, not the VT-d page. This issue causes kernel panic on PAGE_SIZE>VTD_PAGE_SIZE platforms e.g. ia64 platforms. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-05intel-iommu: Correct sglist size calculation.Fenghua Yu
In domain_sg_mapping(), use aligned_nrpages() instead of hand-coded rounding code for calculating the size of each sg elem. This means that on IA64 we correctly round up to the MM page size, not just to the VT-d page size. Also remove the incorrect mm_to_dma_pfn() when intel_map_sg() calls domain_sg_mapping() -- the 'size' variable is in VT-d pages already. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-05Input: i8042 - add Asus G1S to noloop exception listJory A. Pratt
The synaptic touchpad on the Asus G1S is not properly detected when rebooting machine or on cold boot from time to time. Adding the Asus G1S to the noloop exception table resolves the issue. # dmidecode 2.10 SMBIOS 2.4 present. Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: ASUSTeK Computer Inc. Product Name: G1S Version: 1.0 Wake-up Type: Power Switch SKU Number: Family: Signed-off-by: Jory A. Pratt <geekypenguin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 12:47:33 +0000