summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2007-04-27V4L/DVB (5418): Speed is a signed 32-bit integer, not unsigned.Hans Verkuil
Negative speed values have to be allowed for reverse playback. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5417): First unregister the driver, and then free the memory.Hans Verkuil
ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5416): Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5414): Add missing kfree in early exit of saa7115.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5413): Use spin_lock_init to fix lockdep warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5411): Use v4l_printk_ioctl for debugHans Verkuil
Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5409): Add CARDLIST.ivtv and README.ivtvHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5407a): Update feature-removal-schedule.txt: remove VIDIOC_S/G_MPEGCOMPHans Verkuil
Those two experimental APIs never worked fine nor, afaik, were implemented at the apps. Their functionalities were implemented by other means. So, let's remove those obsolete stuff. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5406): Add comment why the symbols are exported.Hans Verkuil
It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree, currently being ported to be in kernel. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5405): Add missing includes.Hans Verkuil
Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5404): Merges VBI & YUV handling into a single work queue.Hans Verkuil
Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5403): Set vsync_field correctly in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5402): Add vsync_field to the union in video_event for ↵Hans Verkuil
VIDEO_EVENT_VSYNC VIDEO_EVENT_VSYNC needs to tell the application which field it was that received a VSYNC (odd/even/progressive). The vsync_field was added to the union in video_event for this purpose. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5399): Usbvideo module handlingOliver Neukum
Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5398): Cpia_pp.c: don't use _WORK_NAROleg Nesterov
pp_cam_entry->cb_task need not to be _NOAUTOREL ... because in fact it is never used ??? Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5397): Saa7134: fix MODULES=n compilationAdrian Bunk
This patch fixes the following compile error with CONFIG_MODULES=n: CC drivers/media/video/saa7134/saa7134-core.o /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979:24: error: macro "request_submodules" passed 1 arguments, but takes just 0 /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c: In function 'saa7134_initdev': /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: 'request_submodules' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.21-rc2-mm1/drivers/media/video/saa7134/saa7134-core.c:979: error: for each function it appears in.) make[5]: *** [drivers/media/video/saa7134/saa7134-core.o] Error 1 Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5392): Zr364xx: Use kernel's byte-swapping functionTrent Piepho
Some code to swap bytes wasn't using the swab16() function that the kernel provides for this. Make use of it, which results in more efficient code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5391): Saa7134: Clean up printk()sTrent Piepho
Change some debug messages from printk() to dprintk(). Add KERN_WARNING and KERN_ERR level indicators to other printk()s that lacked them. Format printk lines with consistent ("%s/dvb: ", dev->name) prefix. Fixed dprintk macro, which had an if with no else that wasn't protected with a do {} while(0) block. That leads to "if(...) dprintk(); else" not doing what one would expect. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5389): Add tveeprom entry for tuner LG S701D MK3Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5388): Ivtv warning fixAndrew Morton
drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5386): Add some missing Hauppauge and Belkin devices to the driverDwaine P. Garden
-Add some missing Hauppauge and Belkin devices to the driver. -Fixed up some device descriptions. Signed-off-by: Dwaine P. Garden <DwaineGarden@rogers.com> Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5385): Fix compilation issue with zr364xx when V4L1 is disabledAntoine Jacquet
Add a missing header to fix compilation issue in the zr364xx driver when CONFIG_VIDEO_V4L1 and CONFIG_VIDEO_V4L1_COMPAT are not set. Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5383): Fix duplicated codes in Pinnacle Grey remoteEmil Georgiev
The keymap for this remote had duplicated labels for different keys, which resulted in those key pairs being unable to function as different inputs. Signed-off-by: Emil Georgiev <emilonlinester@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5381): Dvb-ttpci: Update frontend lock status in transfer mode (bugfix)Oliver Endriss
In transfer/replay mode the frontend lock status was never updated. This caused a 'black screen' if VDR switched from transfer mode to live mode on the same transponder. Thanks to Marco Schluessler for spotting the problem. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5380): Cx25840-firmware include cleanupJean Delvare
There is no reason why cx25840-firmware.c would need to include <linux/i2c-algo-bit.h>. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5379): If possible make vars/functions static.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5378): Add missing IVTV_FB_WARN #defineHans Verkuil
This is needed for ivtv-fb. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5377): Replace SA_* with IRQF_*Hans Verkuil
SA_* interrupt flags are being phased out, update to newer flags. Thanks to Maarten Maathuis for pointing this out to me. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5376): Add dependency on VIDEO_V4L1Hans Verkuil
VIDEO_V4L1 is needed to get tvaudio to be built. Stupid really as ivtv is only using the v4l2 API to communicate with tvaudio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5375): Add missing VIDEO_CX25840 dep, remove unused ↵Hans Verkuil
VIDEO_TLV320AIC23B dep VIDEO_CX25840 was missing in the ivtv dependencies. VIDEO_TLV320AIC23B was removed since it isn't used by ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5374): Or51132: refactor i2c code, improve error resilienceTrent Piepho
The code the i2c transactions was leftover from the old V4L-based ATSC driver. It did too little with too much code. It is re-written to remove unnecessary parameters and be more efficient. A demod register can now be read with one function call, instead of repeating a dozen line block of code each time. There were msleep()'s, which appear to be unnecessary, spread around all the I2C transactions. These have been removed. Reading SNR used to take about 130 ms, now it's down to 1.8 ms. Reads from the demodulator's registers do not return correct results sometimes. Adding or removing the delays in the I2C transactions did not appear to effect the probability of failure. If anything, the transactions without delays were less likely to fail, but since far more transactions could be made per second the number of failures per hour was greater. To increase reliability, the SNR and get_params functions will now retry once if they get bad data back. This appears to have reduced the probability of failure to effectively zero. Some error messages are cleaned up or given KERN_* levels when they were missing. or51132_setmode() wasn't returning correct error codes, which is fixed as well. CC: Rusty Scott <rustys@ieee.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5373): [PATCH] Hauppauge Nova-T endianess problem on powerpcDennis Ranke
When trying to use a Hauppauge Nova-T Stick on a big-endian architecture (such as powerpc) no frontend can be attached. The attached patch fixes this problem by removing two lines in dib0700_ctrl_rd() that try to correct the endianess on two values that already are correct: - /* think about swapping here */ - value = le16_to_cpu(value); - index = le16_to_cpu(index); With this simple patch this dvb hardware works great, thanks to anyone involved for the good work. :) Signed-off-by: Dennis Ranke <mail@exoticorn.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5371): [PATCH] Pinnacle PCTV Sat Pro USB (450e) support by ttusb2.c ↵Christophe Cattelain
(400e driver) Added USB_PID_PCTV_450E to the 'usb_device_id ttusb2_table' and an entry in the .devices table. The 400e driver now supports the 'Pinnacle PCTV Sat Pro USB (450e)' with USB_ID 2304:0222. Signed-off-by: Christophe Cattelain <xof@skynet.be> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5369): Fixed 1 byte too short buffer in tda827x.cHartmut Hackmann
- The i2c data buffer in tda827xa_set_params was 1 byte too short - saa7134-dvb now gives an error mesage if tda827x could not be attached - coding style fix in tda1004x.c Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5367): Pvrusb2: (trivial) Fix too-wide source lineMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5363): Dvb: Remove lgh06xf driverTrent Piepho
The code of the dvb-pll driver and the lgh06xf driver is nearly identical. The main difference is that the lgh06xf driver would set the AGC TOP value on every tune call. The dvb-pll driver now has the ability to set the AGC TOP when the front-end device is opened, which is a better way to go about it. By using this ability of dvb-pll, the lgh06xf driver is made unnecessary. There is one other difference. dvb-pll will probe for the presence of an I2C pll chip by doing a one byte read, the lgh06xf driver did not do this. In some devices the PLL is not reachable over I2C at the timer the tuner is attached. Some more initialization, such as firmware loading, must take place first. None of the devices using a LG-H06xF should have this problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5362): Dvb-pll: add code for doing tuner initializationTrent Piepho
Some tuners need or benefit from initialization, to change certain settings from their power on default values. Typically, tuners with TUA603x PLLs can benefit from setting the AGC TOP value to something else. This patch includes code to set the AGC TOP to 103 dBuV for the Thomson DTT-761x tuners, which I have experimentally verified gives the best SNR readings, increasing SNR by about 0.19 dB over the default value. Other tuners can make use of this as well. For example, the separate LG TDVS-H06xF driver's only difference from dvb-pll is this same setting of AGC TOP value. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5361): Dvb-pll: Fix Kconfig files and allow dvb-pll to be optionalTrent Piepho
A number of drivers selected DVB_PLL when they did not need it, and some that did need it did not select it. The DVB_PLL option is given a name and help text, so that it will show up in the config menu. DVB_PLL support can be turned on if an out-of-tree driver needs it. The standard dvb fe customization support is added to dvb-pll.h. Since all modules which select DVB_PLL do so unconditionally, it is not possible to turn dvb-pll off when an enabled module selects it, unlike most of the other frontend/tuner drivers. This is because the users of dvb-pll have static references to dvb-pll symbols other than the attach function. If these references are removed, then dvb-pll will be disablable as the other frontend/tuner drivers are. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5360): Dvb-pll: Use sizeof() to get name lengthTrent Piepho
Better to use sizeof() to get the size of the output buffer for the tuner name, instead of just hard coding 128. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5356): Fix bogus error messages in ivtv for VIDIOC_G_CHIP_IDENTHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5355): Add VIDIOC_G_CHIP_IDENT to various i2c modulesHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5344): Dvb-ttpci: Support for MSC_RAW and MSC_SCAN RC eventsOliver Endriss
Support for MSC_RAW and MSC_SCAN remote control events. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5341): Add cx23415/6 chip idents.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5336): Cx23416 doc updates + rename CX2341X_ENC_UNKNOWNHans Verkuil
The documentation of Several miscellaneous commands was updated. As a result of which the CX2341X_ENC_UNKNOWN command was renamed to CX2341X_ENC_SET_VERT_CROP_LINE. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5335): Budget-ci: Use the repeat handling of the input subsystemDavid Härdeman
The attached patch contains the last set of changes to the budget-ci IR handling which makes it use the repeat handling of the input subsystem. This allows some code simplification, makes sure that repeat key presses are reported as such and also allows the "debounce" hack to be removed altogether. In addition a couple of static variables were removed which would have confused the IR code if more than one card is used. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5334): Dvb-ttpci: Infrared remote control refactoringOliver Endriss
Infrared remote control support rewritten. Now each device provides its own event device, keymap, protocol, inversion and address setting. EVIOCGKEYCODE and EVIOCSKEYCODE ioctls are supported to read/modify a keymap. Keymaps may be loaded using - input tools (keyb etc.) - av7110_loadkeys (obsolete, for backward compatibility) New command line parameters: - ir_protocol: select infrared protocol: 0 RC5, 1 RCMM (default) - ir_inversion: signal inversion: 0 not inverted (default), 1 inverted - ir_device_mask: bitmask of infrared devices (default: accept all) Those parameters may be set anytime. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5331): Identify MSI TV@nywhere DuoPeter Missel
It is a Lifeview Duo with a different ID Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 04:54:06 +0000