summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-12-05Input: ALPS - add support for DualPoint device on Dell XT2 modelYunkang Tang
The device uses special MPU controller that necessitates the new initialization sequence for the device. We also define a new protocol for the trackpad that allows reporting better resolution than older V2 protocol. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: elantech - add support for newer (August 2013) devicesMatt Walker
Added detection for newer Elantech touchpads, so that kernel doesn't fall-back to default PS/2 driver. Supports touchpads released after ~August 2013. Fixes bug: https://lists.launchpad.net/kernel-packages/msg18481.html Tested on an Acer Aspire S7-392-6302. Signed-off by: Matt Walker <matt.g.d.walker@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: add SW_MUTE_DEVICE switch definitionPing Cheng
Some devices, such as new Intuos series tablets, have a hardware switch to turn touch data on/off. To report the state, SW_MUTE_DEVICE is added in include/uapi/linux/input.h. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-01Input: usbtouchscreen - separate report and transmit buffer size handlingChristian Engelmayer
This patch supports the separate handling of the USB transfer buffer length and the length of the buffer used for multi packet support. For devices supporting multiple report or diagnostic packets, the USB transfer size is now limited to the USB endpoints wMaxPacketSize - otherwise it defaults to the configured report packet size as before. This fixes an issue where event reporting can be delayed for an arbitrary time for multi packet devices. For instance the report size for eGalax devices is defined to the 16 byte maximum diagnostic packet size as opposed to the 5 byte report packet size. In case the driver requests 16 byte from the USB interrupt endpoint, the USB host controller driver needs to split up the request into 2 accesses according to the endpoints wMaxPacketSize of 8 byte. When the first transfer is answered by the eGalax device with not less than the full 8 byte requested, the host controller has got no way of knowing whether the touch controller has got additional data queued and will issue the second transfer. If per example a liftoff event finishes at such a wMaxPacketSize boundary, the data will not be available to the usbtouch driver until a further event is triggered and transfered to the host. From user perspective the BTN_TOUCH release event in this case is stuck until the next touch down event. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-01Input: sur40 - suppress false uninitialized variable warningDmitry Torokhov
We will never use packet_id before initializing it as we start with "need_blobs == -1" and will set packet_id there. Also use le32_to_cpu when fetching header->packet_id. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-26Input: add key code for ambient light sensor buttonPali Rohár
Many notebooks have a special button for enabling/disabling ambient light sensor. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-25Input: keyboard - "keycode & KEY_MAX" changes some keycode valuesAndrew Liu
For exmaple, keycode: KEY_OK(0x160) is changed by "and" operation with KEY_MAX(0x2ff) to KEY_KPENTER(96). Signed-off-by: Andrew Liu <andrew.liu200917@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-22Merge branch 'next' into for-linusDmitry Torokhov
Second round of input updates for 3.13.
2013-11-20MAINTAINERS - add keyboard driver to Hyper-V file listHaiyang Zhang
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: atmel-wm97xx - fix compile errorDmitry Torokhov
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: hp_sdc_rtc - unlock on error in hp_sdc_rtc_read_i8042timer()Dan Carpenter
The transaction task here is hp_sdc_tasklet() and it releases the lock. The problem is if we aren't able to queue the transaction then we need to release the lock ourselves. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: cyttsp4 - remove unnecessary work pending testXie XiuQi
Remove unnecessary work pending test before calling schedule_work(). It has been tested in queue_work_on() already. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-20Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)Florian Echtler
This patch adds support for the built-in multitouch sensor in the Samsung SUR40 touchscreen device, also known as Microsoft Surface 2.0 or Microsoft Pixelsense. Support for raw video output from the sensor as well as the accelerometer will be added in a later patch. Signed-off-by: Florian Echtler <floe@butterbrot.org> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-14Merge branch 'next' into for-linusDmitry Torokhov
Merge first round of changes for 3.13 merge window.
2013-11-14Revert "Input: ALPS - add support for model found on Dell XT2"Dmitry Torokhov
This reverts commit 5beea882e64121dfe3b33145767d3302afa784d5 as it breaks trackpoint operation on XT2.
2013-11-11arm: dts: am335x sk: add touchscreen supportFelipe Balbi
Add missing nodes for the touchscreen available on AM335x EVM SK. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-11Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT bindingFelipe Balbi
There was a spelling mistake on TSC/ADC binding where "coordinate" was spelled as "coordiante". We can't simply fix the error due to DT being an ABI, the approach taken was to first use correct spelling and if that fails, fall back to miss-spelled version. It's unfortunate that has creeped into the tree. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-11Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERODuan Jiong
This patch fixes coccinelle error regarding usage of IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-11Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe()Wei Yongjun
Add missing i2c_set_clientdata() in mma8450_probe(), otherwise calling i2c_get_clientdata() in mma8450_remove() returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-11Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe()Wei Yongjun
Add missing i2c_set_clientdata() in mpu3050_probe(), otherwise calling i2c_get_clientdata() in mpu3050_remove() returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-11Input: tnetv107x-keypad - make irqs signed for error handlingDan Carpenter
There is a bug in keypad_probe() where we do: kp->irq_press = platform_get_irq_byname(pdev, "press"); kp->irq_release = platform_get_irq_byname(pdev, "release"); if (kp->irq_press < 0 || kp->irq_release < 0) { The problem is that these irq variables are unsigned so the error handling doesn't work. I've changed them to signed values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: add driver for Neonode zForce based touchscreensHeiko Stübner
This adds a driver for touchscreens using the zforce infrared technology from Neonode connected via i2c to the host system. It supports multitouch with up to two fingers and tracking of the contacts in hardware. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: sh_keysc - enable the driver on all ARM platformsLaurent Pinchart
Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: remove a redundant max() callKang Hu
dev->hint_events_per_packet is guaranteed to be >= packet_size. so an extra max() call is not needed. Signed-off-by: Kang Hu <hukangustc@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: mousedev - allow disabling even without CONFIG_EXPERTTom Gundersen
Moust (if not all) modern software, including X, uses /dev/eventX rather than the legacy /dev/mouseX devices. It therefore makes sense for general-purpose (distro) kernels to use MOUSEDV=m (or even n), so let's drop the EXPERT=y requirement. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: allow deselecting serio drivers even without CONFIG_EXPERTTom Gundersen
There is plenty of consumer hardware (e.g., mac books) that does not use AT keyboards or PS/2 mice. It therefore makes sense for distro kernels to build the related drivers as modules to avoid loading them on hardware that does not need them. As such, these options should no longer be protected by EXPERT. Moreover, building these drivers as modules gets rid of the following ugly error during boot: [ 2.337745] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.439537] i8042: No controller found Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: i8042 - add PNP modaliasesTom Gundersen
This allows the module to be autoloaded in the common case. In order to work on non-PnP systems the module should be compiled in or loaded unconditionally at boot (c.f. modules-load.d(5)), as before. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: evdev - fall back to vmalloc for client event bufferDaniel Stone
evdev always tries to allocate the event buffer for clients using kzalloc rather than vmalloc, presumably to avoid mapping overhead where possible. However, drivers like bcm5974, which claims support for reporting 16 fingers simultaneously, can have an extraordinarily large buffer. The resultant contiguous order-4 allocation attempt fails due to fragmentation, and the device is thus unusable until reboot. Try kzalloc if we can to avoid the mapping overhead, but if that fails, fall back to vzalloc. Signed-off-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: cypress_ps2 - do not consider data bad if palm is detectedJoseph Salisbury
If hardware (or firmware) detects palm on the surface of the device it does not mean that the data packet is bad from the protocol standpoint. Instead of reporting PSMOUSE_BAD_DATA in this case simply threat it as if nothing touches the surface. BugLink: http://bugs.launchpad.net/bugs/1229361 Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: cypress_ps2 - remove useless castGeyslan G. Bem
Get rid of unnecessary (void *) casting in 'cypress_init' function. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31Input: ALPS - add support for model found on Dell XT2Yunkang Tang
This patch adds support for touchpad found on Dell XT2. It's a dual device with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2". Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-22Input: fix PWM-related undefined reference errorsMajunath Goudar
This patch adds a PWM dependency to configure the INPUT_MAX8997_HAPTIC and INPUT_PWM_BEEPER. Without this patch, build system can lead to build failure. This was observed during randconfig testing, in which INPUT_MAX8997_HAPTIC or INPUT_PWM_BEEPER was enabled w/o PWM being enabled, leading to the following errors: init/built-in.o drivers/built-in.o: In function `max8997_haptic_disable': :(.text+0x1073a0): undefined reference to `pwm_disable' drivers/built-in.o: In function `max8997_haptic_remove': :(.text+0x1073fc): undefined reference to `pwm_free' drivers/built-in.o: In function `max8997_haptic_play_effect_work': :(.text+0x1074f0): undefined reference to `pwm_config' :(.text+0x1075b0): undefined reference to `pwm_enable' drivers/built-in.o: In function `max8997_haptic_probe': :(.text+0x1076f8): undefined reference to `pwm_request' :(.text+0x1077e8): undefined reference to `pwm_free' drivers/built-in.o: In function `pwm_beeper_resume': :(.text+0x1081a4): undefined reference to `pwm_config' make: *** [vmlinux] Error 1 Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-22Input: ALPS - change secondary device's nameYunkang Tang
Change the dev2's name from "PS/2 Mouse" to "ALPS PS/2 Device". Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-22Input: wacom - not all multi-interface devices support touchPing Cheng
Some multi-interface devices support expresskeys on a separate interface, such as Bamboo; some multi-interface devices do not support touch at all, such as Pen only Intuos5. Make sure we report the right device names. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-22Input: wacom - add support for ISDv4 0x10E sensorJason Gerecke
Used in the Fujitsu T732 Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-22Input: wacom - add support for ISDv4 0x10F sensorJason Gerecke
Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Filip Zarnecki <Filip.Zarnecki@fuw.edu.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-15Input: wacom - export battery scopeBastien Nocera
This will stop UPower from detecting the tablet as a power supply, and using its battery status to hibernate or switch off the machine. https://bugs.freedesktop.org/show_bug.cgi?id=70321 Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-15Input: nspire-keypad - add missing clk_disable_unprepare() on error pathWei Yongjun
Add the missing clk_disable_unprepare() before return from nspire_keypad_open() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-15Input: clarify gamepad API ABS valuesDavid Herrmann
It wasn't really clear from the gamepad-API description how ABS values are mapped exactly. Clarify that negative is left/up and positive is right/down. Unfortunately, this means I screwed up the Wii U ProController ABI. Anyhow, this just means we continue to have 0 compatible gamepad drivers in the kernel. User-space needs to fix them up, anyway, as all other gamepads are also incompatible. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-08Merge tag 'v3.12-rc4' into nextDmitry Torokhov
Merge with mainline to bring in changes to input subsystem that were committed through other trees.
2013-10-06Linux 3.12-rc4v3.12-rc4Linus Torvalds
2013-10-06net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
2013-10-06Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
2013-10-06Input: cm109 - convert high volume dev_err() to dev_err_ratelimited()Tim Gardner
BugLink: http://bugs.launchpad.net/bugs/1222850 This input device can get into a state that produces a high volume of device status errors. Attempt to throttle these error messages such that the kernel log is not flooded. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: move name/timer init to input_alloc_dev()David Herrmann
We want to allow drivers to call input_event() at any time after the device got allocated. This means input_event() and input_register_device() must be allowed to run in parallel. The only conflicting calls in input_register_device() are init_timer() and dev_set_name(). Both can safely be moved to device allocation and we're good to go. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: st1232 - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: rotary_encoder - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: pwm-beeper - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: pxa27x_keypad - include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>