summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: Revert "ide: try to use PIO Mode 0 during probe if possible" ide: use printk_once
2009-10-05omap: Lock DPLL5 at bootRajendra Nayak
Lock DPLL5 at 120MHz at boot. The USBHOST 120MHz f-clock and USBTLL f-clock are the only users of this DPLL, and 120MHz is is the only recommended rate for these clocks. With this patch, the 60 MHz ULPI clock is generated correctly. Tested on an OMAP3430 SDP. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-05omap: Fix incorrect 730 vs 850 detectionTony Lindgren
Commit cd92204924fafbd5c7241dfd12ca3176d542e0c5 added support for omap850. However, the patch accidentally removed the wrong ifdef: # define cpu_is_omap730() 1 # endif #endif +#else +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap850 +# define cpu_is_omap850() 1 +# endif +#endif ... void omap2_check_revision(void); #endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ - -#endif Instead of removing removing the #endif at the end of the file, the #endif before #else should have been removed. But we cannot have multiple #else statements as pointed out by Alistair Buxton <a.j.buxton@gmail.com>. So the fix is to: - remove the non-multi-omap special handling, as we need to detect between omap730 and omap850 anyways. - add the missing #endif back to the end of the file Reported-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-05futex: Fix locking imbalanceThomas Gleixner
Rich reported a lock imbalance in the futex code: http://bugzilla.kernel.org/show_bug.cgi?id=14288 It's caused by the displacement of the retry_private label in futex_wake_op(). The code unlocks the hash bucket locks in the error handling path and retries without locking them again which makes the next unlock fail. Move retry_private so we lock the hash bucket locks when we retry. Reported-by: Rich Ercolany <rercola@acm.jhu.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Darren Hart <dvhltc@us.ibm.com> Cc: stable-2.6.31 <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05panic: Fix panic message visibility by calling bust_spinlocks(0) before dyingAaro Koskinen
Commit ffd71da4e3f ("panic: decrease oops_in_progress only after having done the panic") moved bust_spinlocks(0) to the end of the function, which in practice is never reached. As a result console_unblank() is not called, and on some systems the user may not see the panic message. Move it back up to before the unblanking. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1254483680-25578-1-git-send-email-aaro.koskinen@nokia.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05Merge branch 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: add support for change_pte mmu notifiers KVM: MMU: add SPTE_HOST_WRITEABLE flag to the shadow ptes KVM: MMU: dont hold pagecount reference for mapped sptes pages KVM: Prevent overflow in KVM_GET_SUPPORTED_CPUID KVM: VMX: flush TLB with INVEPT on cpu migration KVM: fix LAPIC timer period overflow KVM: s390: fix memsize >= 4G KVM: SVM: Handle tsc in svm_get_msr/svm_set_msr correctly KVM: SVM: Fix tsc offset adjustment when running nested
2009-10-05Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Clear sticky FSR register after saving it to func parametr microblaze: UMS is used only for MMU kernel
2009-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: using HZ needs an include of linux/param.h sparc32: convert to asm-generic/hardirq.h sparc64: Cache per-cpu %pcr register value in perf code. sparc64: Fix comment typo in perf_event.c sparc64: Minor coding style fixups in perf code. sparc64: Add a basic conflict engine in preparation for multi-counter support. sparc64: Increase vmalloc size to fix percpu regressions. sparc64: Add initial perf event conflict resolution and checks. sparc: Niagara1 perf event support. sparc: Add Niagara2 HW cache event support. sparc: Support all ultra3 and ultra4 derivatives. sparc: Support HW cache events.
2009-10-05iSCSI/iBFT: use proper address translationJan Beulich
In virtual environments (namely, Xen Dom0) virt <-> phys and virt <-> isa-bus translations cannot be freely interchanged (and even outside such environments it is not really correct to do so). When looking at memory below 1M, the latter translations should always be used. iscsi_ibft_find.c part from: Martin Wilck <martin.wilck@ts.fujitsu.com>. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <ketuzsezs@darnok.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-05Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Run generate-cmdlist.sh properly perf_event: Clean up perf_event_init_task() perf_event: Fix event group handling in __perf_event_sched_*() perf timechart: Add a power-only mode perf top: Add poll_idle to the skip list
2009-10-05Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: Remove overly verbose "switch to high res mode" message
2009-10-05Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kmemtrace: Fix up tracer registration tracing: Fix infinite recursion in ftrace_update_pid_func()
2009-10-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Don't leak 64-bit kernel register values to 32-bit processes x86, SLUB: Remove unused CONFIG FAST_CMPXCHG_LOCAL x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg x86: Don't generate cmpxchg8b_emu if CONFIG_X86_CMPXCHG64=y x86: Fix csum_ipv6_magic asm memory clobber x86: Optimize cmpxchg64() at build-time some more
2009-10-05rcu: Replace the rcu_barrier enum with pointer to call_rcu*() functionPaul E. McKenney
The rcu_barrier enum causes several problems: (1) you have to define the enum somewhere, and there is no convenient place, (2) the difference between TREE_RCU and TREE_PREEMPT_RCU causes problems when you need to map from rcu_barrier enum to struct rcu_state, (3) the switch statement are large, and (4) TINY_RCU really needs a different rcu_barrier() than do the treercu implementations. So replace it with a functionally equivalent but cleaner function pointer abstraction. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541998232366-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05rcu: Clean up code based on review feedback from Josh Triplett, part 4Paul E. McKenney
These issues identified during an old-fashioned face-to-face code review extending over many hours. This group improves an existing abstraction and introduces two new ones. It also fixes an RCU stall-warning bug found while making the other changes. o Make RCU_INIT_FLAVOR() declare its own variables, removing the need to declare them at each call site. o Create an rcu_for_each_leaf() macro that scans the leaf nodes of the rcu_node tree. o Create an rcu_for_each_node_breadth_first() macro that does a breadth-first traversal of the rcu_node tree, AKA stepping through the array in index-number order. o If all CPUs corresponding to a given leaf rcu_node structure go offline, then any tasks queued on that leaf will be moved to the root rcu_node structure. Therefore, the stall-warning code must dump out tasks queued on the root rcu_node structure as well as those queued on the leaf rcu_node structures. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541491934126-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05rcu: Clean up code based on review feedback from Josh Triplett, part 3Paul E. McKenney
Whitespace fixes, updated comments, and trivial code movement. o Fix whitespace error in RCU_HEAD_INIT() o Move "So where is rcu_write_lock()" comment so that it does not come between the rcu_read_unlock() header comment and the rcu_read_unlock() definition. o Move the module_param statements for blimit, qhimark, and qlowmark to immediately follow the corresponding definitions. o In __rcu_offline_cpu(), move the assignment to rdp_me inside the "if" statement, given that rdp_me is not used outside of that "if" statement. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12541491931164-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05rcu: Fix rcu_lock_map build failure on CONFIG_PROVE_LOCKING=yPaul E. McKenney
Move the rcu_lock_map definition from rcutree.c to rcupdate.c so that TINY_RCU can use lockdep. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix rename of pt_regs offset defines breakage m68knommu: remove duplicated #include m68knommu: show KiB rather than pages in "Freeing initrd memory:" message
2009-10-05OMAP3: PM: introduce a new powerdomain walk helperArtem Bityutskiy
The 'pwrdm_for_each()' function walks powerdomains with a spinlock locked, so the the callbacks cannot do anything which may sleep. This patch introduces a 'pwrdm_for_each_nolock()' helper which does the same, but without the spinlock locked. This fixes the following lockdep warning: [ 0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec() [ 0.000000] Modules linked in: (unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60) (warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec) (lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0) (kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4) (d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118) (__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94) (lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c) (debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20) (debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90) (pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80) (pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c) (pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8) (do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c) (kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05OMAP3: PM: Enable GPIO module-level wakeupsKevin Hilman
Currently, only GPIOs in the wakeup domain (GPIOs in bank 0) are enabled as wakups. This patch also enables GPIOs in the PER powerdomain (banks 2-6) to be used as possible wakeup sources. In addition, this patch ensures that all GPIO wakeups can wakeup the MPU using the PM_MPUGRPSEL_<pwrdm> registers. NOTE: this doesn't enable the individual GPIOs as wakeups, this simply enables the per-bank wakeups at the powerdomain level. This problem was discovered by Mike Chan when preventing the CORE powerdomain from going into retention/off. When CORE was allowed to hit retention, GPIO wakeups via IO pad were working fine, but when CORE remained on, GPIO module-level wakeups were not working properly. To test, prevent CORE from going inactive/retention/off, thus preventing the IO chain from being armed: # echo 3 > /debug/pm_debug/core_pwrdm/suspend This ensures that GPIO wakeups happen via module-level wakeups and not via IO pad. Tested on 3430SDP using the touchscreen GPIO (gpio 2, in WKUP) Tested on Zoom2 using the QUART interrup GPIO (gpio 102, in PER) Also, c.f. OMAP PM wiki for troubleshooting GPIO wakeup issues: http://elinux.org/OMAP_Power_Management Reported-by: Mike Chan <mikechan@google.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05OMAP3: PM: USBHOST: clear wakeup events on both hostsVikram Pandita
USBHOST module has 2 fclocks (for HOST1 and HOST2), only one iclock and only a single bit in the WKST register to indicate a wakeup event. Because of the single WKST bit, we cannot know whether a wakeup event was on HOST1 or HOST2, so enable both fclocks before clearing the wakeup event to ensure both hosts can properly clear the event. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05OMAP3: PM: PRCM interrupt: only handle selected PRCM interruptsPaul Walmsley
Clearing wakeup sources is now only done when the PRM indicates a wakeup source interrupt. Since we don't handle any other types of PRCM interrupts right now, warn if we get any other type of PRCM interrupt. Either code needs to be added to the PRCM interrupt handler to react to these, or these other interrupts should be masked off at init. Updated after Jon Hunter's PRCM IRQ rework by Kevin Hilman. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05OMAP3: PM: PRCM interrupt: check MPUGRPSEL registerPaul Walmsley
PM_WKST register contents should be ANDed with the contents of the MPUGRPSEL registers. Otherwise the MPU PRCM interrupt handler could wind up clearing wakeup events meant for the IVA PRCM interrupt handler. A future revision to this code should be to read a cached version of MPUGRPSEL from the powerdomain code, since PRM reads are relatively slow. Updated after Jon Hunter's PRCM IRQ change by Kevin Hilman Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05OMAP3: PM: Prevent hang in prcm_interrupt_handlerJon Hunter
There are two scenarios where a race condition could result in a hang in the prcm_interrupt handler. These are: 1). Waiting for PRM_IRQSTATUS_MPU register to clear. Bit 0 of the PRM_IRQSTATUS_MPU register indicates that a wake-up event is pending for the MPU. This bit can only be cleared if the all the wake-up events latched in the various PM_WKST_x registers have been cleared. If a wake-up event occurred during the processing of the prcm interrupt handler, after the corresponding PM_WKST_x register was checked but before the PRM_IRQSTATUS_MPU was cleared, then the CPU would be stuck forever waiting for bit 0 in PRM_IRQSTATUS_MPU to be cleared. 2). Waiting for the PM_WKST_x register to clear. Some power domains have more than one wake-up source. The PM_WKST_x registers indicate the source of a wake-up event and need to be cleared after a wake-up event occurs. When the PM_WKST_x registers are read and before they are cleared, it is possible that another wake-up event could occur causing another bit to be set in one of the PM_WKST_x registers. If this did occur after reading a PM_WKST_x register then the CPU would miss this event and get stuck forever in a loop waiting for that PM_WKST_x register to clear. This patch address the above race conditions that would result in a hang. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05Btrfs: fix deadlock on async thread startupChris Mason
The btrfs async worker threads are used for a wide variety of things, including processing bio end_io functions. This means that when the endio threads aren't running, the rest of the FS isn't able to do the final processing required to clear PageWriteback. The endio threads also try to exit as they become idle and start more as the work piles up. The problem is that starting more threads means kthreadd may need to allocate ram, and that allocation may wait until the global number of writeback pages on the system is below a certain limit. The result of that throttling is that end IO threads wait on kthreadd, who is waiting on IO to end, which will never happen. This commit fixes the deadlock by handing off thread startup to a dedicated thread. It also fixes a bug where the on-demand thread creation was creating far too many threads because it didn't take into account threads being started by other procs. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-05sched: Set correct normal_prio and prio values in sched_fork()Peter Williams
normal_prio should be updated if policy changes from RT to SCHED_MORMAL or if static_prio/nice is changed. Some paths through sched_fork() ignore this requirement and may result in normal_prio having an invalid value. Fixing this issue allows the call to effective_prio() in wake_up_new_task() to be removed. Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <f8f46736fd4e7f090ac0.1253774830@mudlark.pw.nest> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05microblaze: Clear sticky FSR register after saving it to func parametrMichal Simek
Previous patch d63678d607d0e37ec7abe5ceb545d7e8aab956a4 clear it for noMMU kernel. This one do it for MMU. Correct noMMU version Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05microblaze: UMS is used only for MMU kernelMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05wext: let get_wireless_stats() sleepJohannes Berg
A number of drivers (recently including cfg80211-based ones) assume that all wireless handlers, including statistics, can sleep and they often also implicitly assume that the rtnl is held around their invocation. This is almost always true now except when reading from sysfs: BUG: sleeping function called from invalid context at kernel/mutex.c:280 in_atomic(): 1, irqs_disabled(): 0, pid: 10450, name: head 2 locks held by head/10450: #0: (&buffer->mutex){+.+.+.}, at: [<c10ceb99>] sysfs_read_file+0x24/0xf4 #1: (dev_base_lock){++.?..}, at: [<c12844ee>] wireless_show+0x1a/0x4c Pid: 10450, comm: head Not tainted 2.6.32-rc3 #1 Call Trace: [<c102301c>] __might_sleep+0xf0/0xf7 [<c1324355>] mutex_lock_nested+0x1a/0x33 [<f8cea53b>] wdev_lock+0xd/0xf [cfg80211] [<f8cea58f>] cfg80211_wireless_stats+0x45/0x12d [cfg80211] [<c13118d6>] get_wireless_stats+0x16/0x1c [<c12844fe>] wireless_show+0x2a/0x4c Fix this by using the rtnl instead of dev_base_lock. Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05be2net: Fix a bug in preparation of mcc wrb which was causing flash ↵Ajit Khaparde
operation to fail This patch fixes a bug that got introduced in commit 76998bc7. During preparation of mcc wrb, req was being wrongly overwritten and the flash operation was failing. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05tracing: Use free_percpu instead of kfreeFrederic Weisbecker
In the event->profile_enable() failure path, we release the per cpu buffers using kfree which is wrong because they are per cpu pointers. Although free_percpu only wraps kfree for now, that may change in the future so lets use the correct way. Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zefan <lizf@cn.fujitsu.com>
2009-10-05tracing: Check total refcount before releasing bufs in profile_enable failureFrederic Weisbecker
When we call the profile_enable() callback of an event, we release the shared perf event tracing buffers unconditionnaly in the failure path. This is wrong because there may be other users of these. Then check the total refcount before doing this. Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zefan <lizf@cn.fujitsu.com>
2009-10-05sparc: using HZ needs an include of linux/param.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05pcnet_cs: add cis of National Semicondoctor's multifunction pcmcia cardKen Kawasaki
pcnet_cs,serial_cs: add cis of National Semicondoctor's lan&modem mulitifunction pcmcia card, NE2K, tamarack ethernet card, and some serial card(COMpad2, COMpad4). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05net: Support inclusion of <linux/socket.h> before <sys/socket.h>Ben Hutchings
The following user-space program fails to compile: #include <linux/socket.h> #include <sys/socket.h> int main() { return 0; } The reason is that <linux/socket.h> tests __GLIBC__ to decide whether it should define various structures and macros that are now defined for user-space by <sys/socket.h>, but __GLIBC__ is not defined if no libc headers have yet been included. It seems safe to drop support for libc 5 now. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Bastian Blank <waldi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05ALSA: hda - Fix invalid initializations for ALC861 auto modeTakashi Iwai
The recent auto-parser doesn't work for machines with a single output with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets the hp_pins[0] while it's listed in line_outs[0]. This ends up with the doubled initialization of the same mixer widget, and it mutes the DAC route because hp_pins has no DAC assigned. To fix this problem, just check spec->autocfg.hp_outs and speaker_outs so that they are really detected pins. Reference: Novell bnc#544161 http://bugzilla.novell.com/show_bug.cgi?id=544161 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-04pktgen: restore nanosec delaysEric Dumazet
Commit fd29cf72 (pktgen: convert to use ktime_t) inadvertantly converted "delay" parameter from nanosec to microsec. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04pktgen: Fix multiqueue handlingEric Dumazet
It is not currently possible to instruct pktgen to use one selected tx queue. When Robert added multiqueue support in commit 45b270f8, he added an interval (queue_map_min, queue_map_max), and his code doesnt take into account the case of min = max, to select one tx queue exactly. I suspect a high performance setup on a eight txqueue device wants to use exactly eight cpus, and assign one tx queue to each sender. This patchs makes pktgen select the right tx queue, not the first one. Also updates Documentation to reflect Robert changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04e1000e: swap max hw supported frame size between 82574 and 82583Alexander Duyck
There appears to have been a mixup in the max supported jumbo frame size between 82574 and 82583 which ended up disabling jumbo frames on the 82574 as a result. This patch swaps the two so that this issue is resolved. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14261 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04ixgbe: add support for 82599 based X520 10G Dual KX4 Mezz cardDon Skidmore
This patch adds device support for the 82599 based X520 10GbE Dual Port KX4 Mezzanine card. Signed-off-by: Don Skidmore<donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04ixgbe: add support for 82599 Combined BackplaneDon Skidmore
This patch will add support for the 82599 Dual port Backplane device (0x10f8). This device has the ability to link in serial (KR) and parallel (KX4/KX) modes, depending on what the switch capabilities are in the blade chassis. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-04Revert "ide: try to use PIO Mode 0 during probe if possible"David S. Miller
This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Based upon a report by David Fries, wherein his system hangs on bootup with sis5513 controller, right after the CDROM is registered by ide-cd.c and the TOC is first read. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05sh: mach-ecovec24: Document DS2 switch settings.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-04Linux 2.6.32-rc3v2.6.32-rc3Linus Torvalds
I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in order to avoid confusion, I'm jumping from -rc1 to -rc3. That way, when 'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about whether people perhaps meant -rc1 or -rc2.
2009-10-05drm/fb: add setcmap and fix 8-bit support.Dave Airlie
This adds support for the setcmap api and fixes the 8bpp support at least on radeon hardware. It adds a new load_lut hook which can be called once the color map is setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)Dave Airlie
Also add single crtc for RN50 chips. changes in v2: fix vblank init to respect single crtc flag fix r100 mode bandwidth to respect single crtc flag Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctlZhao Yakui
We can get the corresponding info by adding the boot option of "drm.debug= 0x07". But On some boxes it will print the following message many times in course of moving mouse. In such case the useful DRM debug info will be flushed. >[drm:drm_mode_cursor_ioctl], Avoid using the DRM_DEBUG_KMS in drm_mode_cursor_ioctl. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05drm/radeon/kms: add support for "Surround View"Alex Deucher
"Surround View" is an option in the system bios that enables the AMD IGP chip in conjunction with a discrete AMD card. However, since the IGP vbios is part of the system bios it is not accessible via the rom bar or the legacy vga location. When "Surround View" is enabled in the system bios, the system bios puts a copy of the IGP vbios image at the start of vram. This patch adds support for reading the vbios image out of vram on IGP cards. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-04headers: remove sched.h from poll.hAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04Merge branch 'acpi-pad' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acpi_pad: build only on X86 ACPI: create Processor Aggregator Device driver Fixup trivial conflicts in MAINTAINERS file.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 08:05:37 +0000