summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-05-14Merge tag 'asoc-v3.15-rc5-drivers' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Driver fixes for v3.15 A small set of driver fixes, nothing remarkable in itself or of any relevance outside of the driver.
2014-05-14Merge tag 'asoc-v3.15-rc5-core' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Core fixes for v3.15 A few things here: - Fix the creation of spurious CODEC<->CODEC links which caused DAPM to have audio paths which shouldn't be present causing spurious powerups and potential audible issues for users. - Ensure the suspend->off transition doesn't have spurious transitions to prepare added to the sequence. - Fix incorrect skipping of PCM suspension for active audio streams. - Remove Timur Tabi from the CS4270 maintainers, Cirrus are now doing this and Timur no longer has the boards that he was using.
2014-05-14Merge remote-tracking branch 'asoc/fix/pcm' into asoc-linusMark Brown
2014-05-14Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2014-05-14Merge remote-tracking branches 'asoc/fix/audmux', 'asoc/fix/cs42l52', ↵Mark Brown
'asoc/fix/fsl-esai', 'asoc/fix/fsl-spdif', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/wm8962' into asoc-linus
2014-05-13ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatileCharles Keepax
The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-05-13ALSA: hda - mask buggy stream DMA0 for Broadwell display controllerMengdong Lin
Broadwell display controller has 3 stream DMA engines. DMA0 cannot update DMA postion buffer properly while DMA1 and DMA2 can work well. So this patch masks the buggy DMA0 by keeping it as opened. This is a tentative workaround, so keep the change small as Takashi suggested. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-13ALSA: hda - Add new GPU codec ID to snd-hdaAaron Plattner
Vendor ID 0x10de0071 is used by a yet-to-be-named GPU chip. Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-12ASoC: fsl_esai: Set PCRC and PRRC registers at the end of hw_params()Nicolin Chen
According to Reference Manual -- ESAI Initialization chapter, as the standard procedure of ESAI personal reset, the PCRC and PRRC registers should be remained in its reset value and then configured after T/RCCR and T/RCR configurations's done but before TE/RE's enabling. So this patch moves PCRC and PRRC settings to the end of hw_params(). Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12ASoC: fsl_esai: Only bypass sck_div for EXTAL sourceNicolin Chen
ESAI can only output EXTAL clock source directly. But for FSYS clock source, ESAI can not output it without getting through PSR PM dividers. So this patch adds an extra check in the code. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12ASoC: fsl_esai: Fix incorrect condition within ratio range check for FPNicolin Chen
The range here from 1 to 16 is confined to FP divider only while the sck_div indicates if the calculation contains PSR and PM dividers. So for the case using PSR and PM since the sck_div is true, the range of ratio would simply become bigger than 16. So this patch fixes the condition here and adds one line comments to make the purpose here clear. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12ASoC: dapm: Fix SUSPEND -> OFF bias sequenceLars-Peter Clausen
Currently when the DAPM context bias level is SUSPEND and the target bias level is OFF dapm_pre_sequence_async() will first transition to PREPARE and dapm_post_sequence_async() will then transition back from PREPARE to STANDBY and then to OFF. This patch makes sure that dapm_pre_sequence_async() only transitions to PREPARE when either going to ON or away from ON. This avoids the extra unnecessary transitions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12ASoC: dapm: Skip CODEC<->CODEC links in connect_dai_link_widgets()Lars-Peter Clausen
For CODEC to CODEC DAI links the paths are created in snd_soc_dapm_new_pcm(). Also for CODEC to CODEC links the widgets are connected cross-over via a DAI link widget, meaning that the capture widget of one CODEC will be connected to the playback widget of the other and vice versa. Whereas snd_soc_dapm_connect_dai_link_widgets() directly connects the playback widget of the CPU DAI to the playback widget of the CODEC DAI and the capture widget of the CPU DAI to the capture widget of the CODEC DAI. So not skipping CODEC<->CODEC links in snd_soc_dapm_connect_dai_link_widgets() will create incorrect connections between the two CODECs which will cause DAPM to detect active paths where there are none and unnecessarily power up widgets. Fixes: b893ea5 ("ASoC: sapm: Automatically connect DAI link widgets in DAPM graph.") Cc: <stable@vger.kernel.org> (for 3.14+) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-12ASoC: pcm: Fix incorrect condition check for case SNDRV_PCM_TRIGGER_SUSPENDNicolin Chen
The regular state before we execute SNDRV_PCM_TRIGGER_SUSPEND should be SNDRV_PCM_TRIGGER_START, not SNDRV_PCM_TRIGGER_STOP. Thus fix it. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-09ALSA: hda - add headset mic detect quirks for three Dell laptopsHui Wang
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x1028065c; VID: 0x10ec0255, SID: 0x10280680; VID: 0x10ec0292, SID: 0x10280684), the headset mic can't be detected, after apply this patch, the headset mic can work well. And on the machine with SID 0x10280684, and the Lineout and external microphone should be routed to docking, this patch also fix this problem. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-07ASoC: Update Cirrus Logic CODEC maintainers.Paul Handrigan
Remove Timur Tabi as maintainer for CS4270 codec. I would like to thank Timur for his work on maintaining this driver. Signed-off-by: Paul Handrigan <paul.handrigan@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-05ALSA: hda - hdmi: Set converter channel count even without sinkAnssi Hannula
Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: Stephan Raue <stephan@openelec.tv> Tested-by: Stephan Raue <stephan@openelec.tv> Cc: <stable@vger.kernel.org> # 3.12+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch
The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Fix deadlocks at resumingTakashi Iwai
The recent addition of the USB audio mixer suspend/resume may lead to deadlocks when the driver tries to call usb_autopm_get_interface() recursively, since the function tries to sync with the finish of the other calls. For avoiding it, introduce a flag indicating the resume operation and avoids the recursive usb_autopm_get_interface() calls during the resume. Reported-and-tested-by: Bryan Quigley <gquigs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Save mixer status only once at suspendTakashi Iwai
The suspend callback of usb-audio driver may be called multiple times per suspend when multiple USB interfaces are bound to a single sound card instance. In such a case, it's superfluous to save the mixer values multiple times. This patch fixes it by checking the counter. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while ↵Sander Eikelenboom
DEBUG not defined This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-30ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x1028067e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-29ALSA: hda - Suppress CORBRP clear on Nvidia controller chipsTakashi Iwai
The recent commit (ca460f86521) changed the CORB RP reset procedure to follow the specification with a couple of sanity checks. Unfortunately, Nvidia controller chips seem not following this way, and spew the warning messages like: snd_hda_intel 0000:00:10.1: CORB reset timeout#1, CORBRP = 0 This patch adds the workaround for such chips. It just skips the new reset procedure for the known broken chips. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28ALSA: hda - add headset mic detect quirk for a Dell laptopHui Wang
When we plug a 3-ring headset on the Dell machine (VID: 0x10ec0255, SID: 0x10280674), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28Merge tag 'asoc-v3.15-rc2' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.15 A smattering of driver-specific fixes here, nothing generic. The Cirrus CODEC conversions to devm_ are leak fixes - the conversion adds missing error handling code.
2014-04-25ASoC: tlv320aic31xx: Convert /n to \nJoe Perches
Use a newline character appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24ASoC: imx-audmux: Fix section mismatchLars-Peter Clausen
audmux_debugfs_init() is marked as __init, but is called from imx_audmux_probe() which is not marked as __init. This creates a section mismatch and a potential runtime crash (if imx_audmux_probe() is called after the .init section was dropped). This patch removes the __init annotation from audmux_debugfs_init(), which fixes the following warning: WARNING: sound/soc/built-in.o(.text+0x86960): Section mismatch in reference from the function imx_audmux_probe() to the function .init.text:audmux_debugfs_init() Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-23ASoC: rsnd: call rsnd_dai_pointer_update() from outside of lockKuninori Morimoto
rsnd_soc_dai_trigger() will be called after rsnd_dai_pointer_update() function which is using rsnd_lock(). Thus, it should be called from outside of rsnd_lock(). Kernel will be hangup without this patch. Special thanks to Kataoka-san Reported-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22Merge remote-tracking branches 'asoc/fix/intel', 'asoc/fix/jz4740', ↵Mark Brown
'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/tlv320aic3x' into asoc-linus
2014-04-22Merge remote-tracking branches 'asoc/fix/alc5623', 'asoc/fix/cs42l52', ↵Mark Brown
'asoc/fix/cs42l73' and 'asoc/fix/fsl-spdif' into asoc-linus
2014-04-22Merge remote-tracking branch 'asoc/fix/dapm' into asoc-linusMark Brown
2014-04-22ASoC: jz4740: Remove Makefile entry for removed fileLars-Peter Clausen
Commit 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") jz4740-pcm.c file, but neglected to remove the Makefile entries. Fixes: 0406a40a0 ("ASoC: jz4740: Use the generic dmaengine PCM driver") Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22ASoC: Intel: Fix audio crash due to negative address offsetWenkai Du
There were occasional ADSP crash during reboot testing: [ 11.883364] BUG: unable to handle kernel paging request at ffffc90121700000 [ 11.883380] IP: [<ffffffffc024d8bc>] sst_module_insert_fixed_block+0x24f/0x26d [snd_soc_sst_dsp] [ 11.883397] PGD 7800b067 PUD 0 [ 11.883405] Oops: 0002 [#1] SMP [ 11.886418] gsmi: Log Shutdown Reason 0x03 The virtual address, ffffc90121700000, was out of range. The virtual address is calculated by adding LPE base address with an offset: sst_memcpy32(dsp->addr.lpe + data->offset, data->data, data->size); The offset is calculated in sst_byt_parse_module, by subtraction of two virtual addresses dsp->addr.fw_ext and dsp->addr.lpe: block_data.offset = block->ram_offset + (dsp->addr.fw_ext - dsp->addr.lpe); These virtual addresses are assigned by kernel from ioremap: sst->addr.lpe = ioremap(pdata->lpe_base, pdata->lpe_size); sst->addr.fw_ext = ioremap(pdata->fw_base, pdata->fw_size); In current driver code, offset is defined as unsigned int32: struct sst_module_data { ... u32 offset; /* offset in FW file */ }; Most of the time kernel assigned virtual addresses with addr.fw_ext greater than addr.lpe. But sometimes it was the other way round. Fix the problem by declaring offset as signed int32_t. Signed-off-by: Wenkai Du <wenkai.du@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-21ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrolJarkko Nikula
Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable") is trying to free the widget it allocated by snd_soc_dapm_new_control() call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to dapm_kcontrol_free(). This is causing a widget double free with auto-disabled DAPM kcontrols in sound card unregistration because widgets are already freed before dapm_kcontrol_free() is called. Reason for that is all widgets are added into dapm->card->widgets list in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during execution of snd_soc_dapm_free(). Now snd_soc_dapm_free() calls for different DAPM contexts happens before snd_card_free() call from where the call chain to dapm_kcontrol_free() begins: soc_cleanup_card_resources() soc_remove_dai_links() soc_remove_link_dais() snd_soc_dapm_free(&cpu_dai->dapm) soc_remove_link_components() soc_remove_platform() snd_soc_dapm_free(&platform->dapm) soc_remove_codec() snd_soc_dapm_free(&codec->dapm) snd_soc_dapm_free(&card->dapm) snd_card_free() snd_card_do_free() snd_device_free_all() snd_device_free() snd_ctl_dev_free() snd_ctl_remove() snd_ctl_free_one() dapm_kcontrol_free() This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for them. Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable) Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-04-20Linux 3.15-rc2v3.15-rc2Linus Torvalds
2014-04-20Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling
2014-04-20Merge tag 'iommu-fixes-v3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea46
2014-04-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
2014-04-20Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-20perf tools: Improve error reportingAdrien BAK
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf tools: Adjust symbols in VDSOVladimir Nikulichev
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvs Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-20perf kvm: Fix 'Min time' counting in report commandAlexander Yarygin
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by: Jiri Olsa <jolsa@redhat.com>
2014-04-19coredump: fix va_list corruptionEric Dumazet
A va_list needs to be copied in case it needs to be used twice. Thanks to Hugh for debugging this issue, leading to various panics. Tested: lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern 'produce_core' is simply : main() { *(int *)0 = 1;} lpq84:~# ./produce_core Segmentation fault (core dumped) lpq84:~# dmesg | tail -1 [ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed Notice the last argument was replaced by a NULL (we were lucky enough to not crash, but do not try this on your production machine !) After fix : lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern lpq83:~# ./produce_core Segmentation fault lpq83:~# dmesg | tail -1 [ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed Fixes: 5fe9d8ca21cc ("coredump: cn_vprintf() has no reason to call vsnprintf() twice") Signed-off-by: Eric Dumazet <edumazet@google.com> Diagnosed-by: Hugh Dickins <hughd@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
2014-04-19Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: - a SCHED_DEADLINE task selection fix - a sched/numa related lockdep splat fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Check for stop task appearance when balancing happens sched/numa: Fix task_numa_free() lockdep splat
2014-04-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kernel side fixes: - an Intel uncore PMU driver potential crash fix - a kprobes/perf-call-graph interaction fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU kprobes/x86: Fix page-fault handling logic
2014-04-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Unfortunately this contains no easter eggs, its a bit larger than I'd like, but I included a patch that just moves code from one file to another and I'd like to avoid merge conflicts with that later, so it makes it seem worse than it is, Otherwise: - radeon: fixes to use new microcode to stabilise some cards, use some common displayport code, some runtime pm fixes, pll regression fixes - i915: fix for some context oopses, a warn in a used path, backlight fixes - nouveau: regression fix - omap: a bunch of fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (51 commits) drm: bochs: drop unused struct fields drm: bochs: add power management support drm: cirrus: add power management support drm: Split out drm_probe_helper.c from drm_crtc_helper.c drm/plane-helper: Don't fake-implement primary plane disabling drm/ast: fix value check in cbr_scan2 drm/nouveau/bios: fix a bit shift error introduced by 457e77b drm/radeon/ci: make sure mc ucode is loaded before checking the size drm/radeon/si: make sure mc ucode is loaded before checking the size drm/radeon: improve PLL params if we don't match exactly v2 drm/radeon: memory leak on bo reservation failure. v2 drm/radeon: fix VCE fence command drm/radeon: re-enable mclk dpm on R7 260X asics drm/radeon: add support for newer mc ucode on CI (v2) drm/radeon: add support for newer mc ucode on SI (v2) drm/radeon: apply more strict limits for PLL params v2 drm/radeon: update CI DPM powertune settings drm/radeon: fix runpm handling on APUs (v4) drm/radeon: disable mclk dpm on R7 260X drm/tegra: Remove gratuitous pad field ...
2014-04-19Merge branch 'drm-next-3.15-wip' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-next Some i2c fixes over DisplayPort. * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: Improve vramlimit module param documentation drm/radeon: fix audio pin counts for DCE6+ (v2) drm/radeon/dp: switch to the common i2c over aux code drm/dp/i2c: Update comments about common i2c over dp assumptions (v3) drm/dp/i2c: send bare addresses to properly reset i2c connections (v4) drm/radeon/dp: handle zero sized i2c over aux transactions (v2) drm/i915: support address only i2c-over-aux transactions drm/tegra: dp: Support address-only I2C-over-AUX transactions
2014-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull more networking fixes from David Miller: 1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI context, not synchronize it. From Chris Mason. 2) Ipv4 flow input interface should never be zero, it should be LOOPBACK_IFINDEX instead. From Cong Wang and Julian Anastasov. 3) Properly configure MAC to PHY connection in mvneta devices, from Thomas Petazzoni. 4) sys_recv should use SYSCALL_DEFINE. From Jan Glauber. 5) Tunnel driver ioctls do not use the correct namespace, fix from Nicolas Dichtel. 6) Fix memory leak on seccomp filter attach, from Kees Cook. 7) Fix lockdep warning for nested vlans, from Ding Tianhong. 8) Crashes can happen in SCTP due to how the auth_enable value is managed, fix from Vlad Yasevich. 9) Wireless fixes from John W Linville and co. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net: sctp: cache auth_enable per endpoint tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled vlan: Fix lockdep warning when vlan dev handle notification seccomp: fix memory leak on filter attach isdn: icn: buffer overflow in icn_command() ip6_tunnel: use the right netns in ioctl handler sit: use the right netns in ioctl handler ip_tunnel: use the right netns in ioctl handler net: use SYSCALL_DEFINEx for sys_recv net: mdio-gpio: Add support for separate MDI and MDO gpio pins net: mdio-gpio: Add support for active low gpio pins net: mdio-gpio: Use devm_ functions where possible ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source() ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll net: mvneta: properly configure the MAC <-> PHY connection in all situations net: phy: add minimal support for QSGMII PHY sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast) mwifiex: fix hung task on command timeout mwifiex: process event before command response ...
2014-04-18Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "A set of 5 small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cif: fix dead code cifs: fix error handling cifs_user_readv fs: cifs: remove unused variable. Return correct error on query of xattr on file with empty xattrs cifs: Wait for writebacks to complete before attempting write.