summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-04-22USB: fix remote wakeup settings during system sleepAlan Stern
This patch (as1363) changes the way USB remote wakeup is handled during system sleeps. It won't be enabled unless an interface driver specifically needs it. Also, it won't be enabled during the FREEZE or QUIESCE phases of hibernation, when the system doesn't respond to wakeup events anyway. Finally, if the device is already runtime-suspended with remote wakeup enabled, but wakeup is supposed to be disabled for the system sleep, the device gets woken up so that it can be suspended again with the proper wakeup setting. This will fix problems people have reported with certain USB webcams that generate wakeup requests when they shouldn't, and as a result cause system suspends to fail. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Erik Andrén <erik.andren@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: pl2303: add AdLink ND-6530 USB IDsManuel Jander
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.William Lightning
Signed-off-by: William Lightning <kassah@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: OHCI: DA8xx/OMAP-L1x: fix up macro renameSergei Shtylyov
It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable: commit 1960e693ac12ae5fe518309d6a63a44c93fad9e7 (davinci: da8xx/omapl1: add support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to DA8XX_SYSCFG0_* and it's been committed before the glue layer... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: qcaux: add LG Rumor and Sanyo Katana LX device IDsDan Williams
These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when placed into "Dial-up Networking" mode after connecting a USB cable. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22usb: wusb: don't overflow the Keep Alive IE bufferDavid Vrabel
The Keep Alive IE only has space for WUIE_ELT_MAX (== 4) device addresses. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ehci: omap: fix kernel panic with rmmodAjay Kumar Gupta
Sets the regulator values to NULL if they are not defined. This is required to fix the kernel panic in exit path when EHCI module is removed on the platforms where EHCI regulator are not set. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: fixed bug in usbsevseg using USB autosuspend incorrectlyHarrison Metzger
This patch fixes a bug with the usbsevseg driver which assumed that USB autosuspend will always be used. Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22USB: ti_usb_3410_5052: adding multitech dialup fax/modem devicesAlex Manoussakis
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-22drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy BridgeJesse Barnes
Since 965, the hardware has supported the PIPE_CONTROL command, which provides fine grained GPU cache flushing control. On recent chipsets, this instruction is required for reliable interrupt and sequence number reporting in the driver. So add support for this instruction, including workarounds, on Ironlake and Sandy Bridge hardware. https://bugs.freedesktop.org/show_bug.cgi?id=27108 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-23md/raid5: fix previous patch.NeilBrown
Previous patch changes stripe and chunk_number to sector_t but mistakenly did not update all of the divisions to use sector_dev(). This patch changes all the those divisions (actually the '%' operator) to sector_div. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2010-04-22drm/i915: cleanup FBC buffers at unload timeJesse Barnes
This keeps the memory manager from complaining when we take it down. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: wait for local CSR lock access to finish firewire: ohci: prevent aliasing of locally handled register addresses firewire: core: fw_iso_resource_manage: return -EBUSY when out of resources firewire: core: fix retries calculation in iso manage_channel() firewire: cdev: fix cut+paste mistake in disclaimer
2010-04-22NFS: Fix an unstable write data integrity raceTrond Myklebust
Commit 2c61be0a9478258f77b66208a0c4b1f5f8161c3c (NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible) exposed a race on file close. In order to ensure correct close-to-open behaviour, we want to wait for all outstanding background commit operations to complete. This patch adds an inode flag that indicates if a commit operation is under way, and provides a mechanism to allow ->write_inode() to wait for its completion if this is a data integrity flush. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-04-22nfs: testing for null instead of ERR_PTR()Dan Carpenter
nfs_path() returns an ERR_PTR(), it doesn't return null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-04-22NFS: rsize and wsize settings ignored on v4 mountsChuck Lever
NFSv4 mounts ignore the rsize and wsize mount options, and always use the default transfer size for both. This seems to be because all NFSv4 mounts are now cloned, and the cloning logic doesn't copy the rsize and wsize settings from the parent nfs_server. I tested Fedora's 2.6.32.11-99 and it seems to have this problem as well, so I'm guessing that .33, .32, and perhaps older kernels have this issue as well. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Stable <stable@kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-04-22NFSv4: Don't attempt an atomic open if the file is a mountpointTrond Myklebust
Fix https://bugzilla.kernel.org/show_bug.cgi?id=15789 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-04-22SUNRPC: Fix a bug in rpcauth_prune_expiredTrond Myklebust
Don't want to evict a credential if cred->cr_expire == jiffies, since that means that it was just placed on the cred_unused list. We therefore need to use time_in_range() rather than time_in_range_open(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-04-22dri-devel mailing list moved - update MAINTAINERSValdis.Kletnieks@vt.edu
I posted to dri-devel@lists.sourceforge.net, and got a bounce back: The dri-devel list has moved to freedesktop.org (see http://lists.freedesktop.org/mailman/listinfo/dri-devel). If you were subscribed to the list here, the subscription should have been transferred to the new location. Please only post to the new list. Fix MAINTAINERS to correspond. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/miscLinus Torvalds
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: uml: Fix build breakage after slab.h changes
2010-04-22scsi: fix operator precedence warningRandy Dunlap
Fix operator precedence warning (from sparse), which results in the data value always being 0: drivers/scsi/qla4xxx/ql4_mbx.c:470:66: warning: right shift by bigger than source value Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ravi Anand <ravi.anand@qlogic.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Cc: Karen Higgins <karen.higgins@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] zcore: Fix reipl device detection [S390] vdso: use ntp adjusted clock multiplier [S390] cio: use exception-save stsch [S390] add hook to reenable mss after hibernation [S390] cio: allow enable_facility from outside init functions [S390] dasd: fix endless loop in erp
2010-04-22[S390] zcore: Fix reipl device detectionMichael Holzheu
The reipl device information is passed from the kernel to zfcpdump using a pointer in the lowcore (0xe00) that points to the reipl information Currently if that pointer is not zero, we copy the reipl information. If the pointer is not initialized and points outside the accessible memory, it can happen that the memory copy fails. In that case we currently stop the initialization of zcore which leads to a failing kernel dump. The correct behavior is to disable the reipl after dump and continue with zcore intialization. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] vdso: use ntp adjusted clock multiplierHendrik Brueckner
Commit "timekeeping: Fix clock_gettime vsyscall time warp" (0696b711e) introduced the new parameter "mult" to update_vsyscall(). This parameter contains the internal NTP adjusted clock multiplier. The s390x vdso did not use this adjusted multiplier. Instead, it used the constant clock multiplier for gettimeofday() and clock_gettime() variants. This may result in observable time warps as explained in commit 0696b711e. Make the NTP adjusted clock multiplier available to the s390x vdso implementation and use it for time calculations. Cc: <stable@kernel.org> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] cio: use exception-save stschSebastian Ott
Using stsch on schids with ssid != 0 can lead to an operand exception. Use stsch_err to handle potential exceptions if we fail to reenable mss after hibernation. Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] add hook to reenable mss after hibernationSebastian Ott
Reenable multiple subchannel sets after hibernation, prior to the device callbacks. Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] cio: allow enable_facility from outside init functionsSebastian Ott
Prepare chsc_enable_facility to be used from outside init functions. Use static memory for the chsc call and protect its access by a spinlock (although there is no concurrent usage). Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22[S390] dasd: fix endless loop in erpStefan Haberland
If not enough memory is available to build a new erp request it ended up in an endless loop trying to build erp requests. Fixed the loop to proceed the next request instead. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-22ALSA: snd-meastro3: Ignore spurious HV interrupts during suspend / resumeHans de Goede
Ignore spurious HV interrupts during suspend / resume, this avoids mistaking them for a mute button press. This is not very pretty but it seems the only way to fix the master volume control gets muted after suspend issue I'm seeing. Note that the es1968 driver is doing exactly the same. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-22ALSA: snd-meastro3: Add amp_gpio quirk for Compaq EVO N600CHans de Goede
Without this quirk sound stops working after suspend resume. With this quirk, one still needs to manually unmute the master volume control after a suspend / / resume cycle. That is fixed in another patch in this set. Note that this patch was submitted to the alsa bug tracker a long time ago: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4319 Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bnx2i: Bug fixes related to MTU change issue when there are active iscsi sessions [SCSI] ibmvscsi: fix DMA API misuse [SCSI] wd7000: fix reset handler typo spin_unlock_irq() => spin_lock_irq() [SCSI] zfcp: Fix tracing of requests with error status [SCSI] zfcp: Update MAINTAINERS entry [SCSI] iscsi_tcp: fix relogin/shutdown hang [SCSI] qla2xxx: fix lock imbalance [SCSI] lpfc: fix lock imbalances [SCSI] be2iscsi: fix lock imbalance [SCSI] dpt_i2o: several use after free issues
2010-04-22virtio: Fix GFP flags passed from the virtio balloon driverBalbir Singh
The virtio balloon driver can dig into the reservation pools of the OS to satisfy a balloon request. This is not advisable and other balloon drivers (drivers/xen/balloon.c) avoid this as well. The patch also adds changes to avoid printing a warning if allocation fails, since we retry after sometime anyway. Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: kvm <kvm@vger.kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c-stu300: off by one issue i2c-pnx: Add stop conditions for end of transfer i2c-pnx: Limit maximum divider to 1023 i2c-omap: fix OOPS in omap_i2c_unidle() during probe i2c-imx: fix error handling
2010-04-22staging: fix dt3155 buildRandy Dunlap
When the dt3155 driver is built-in (not as a loadable module), these build errors happen: drivers/staging/dt3155/dt3155_drv.c:1047: error: implicit declaration of function 'request_irq' drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_DISABLED' undeclared (first use in this function) drivers/staging/dt3155/dt3155_drv.c:1091: error: implicit declaration of function 'free_irq' so remove the #ifdef MODULE check since it's not needed. Also remove the CONFIG_PCI check since the Kconfig file already requires that. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Scott Smedley <ss@aao.gov.au> Tested-by: Jan III Sobieski <jan3sobi3ski@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: security: testing the wrong variable in create_by_name() CRED: Fix a race in creds_are_invalid() in credentials debugging CRED: Fix double free in prepare_usermodehelper_creds() error handling
2010-04-22ALSA: hda: Use ALC880_F1734 quirk for Fujitsu Siemens AMILO Xi 1526Daniel T Chen
BugLink: https://launchpad.net/bugs/567494 The OR has verified that the existing model quirk, ALC880_UNIWILL, is insufficient for audible playback and capture by default. Instead, the ALC880_F1734 model quirk needs to be used. This change is necessary for both 2.6.32.11 and 2.6.33.2. Reported-by: Arnaud Malpeyre <amalpeyre@gmail.com> Tested-by: Arnaud Malpeyre <amalpeyre@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-22drbd: Terminate a connection early if sending the protocol failsPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22drbd: fix memory leakDan Carpenter
We leak memory if "--dry-run" is not supported by the peer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22Fix JFFS2 sync silent failureJörn Engel
JFFS2 does not appear to set s_bdi anywhere. And as of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. As a result, sync_fs() is never called for jffs2 and whatever remains in the wbuf will not make it to the device. Fix that up by assigning the mtd bdi. Signed-off-by: Jörn Engel <joern@logfs.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT.viresh kumar
pl061_direction_output doesn't set value of gpio to value passed to it. This patch sets value of GPIO pin to requested value after changing direction to OUT. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs.viresh kumar
PL061 driver is using set_irq_chip_data and get_irq_chip_data for real irq lines. It must be using *_irq_data functions instead. As chip_data is used by interrupt controllers also, which makes vic write at incorrect addresses. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22ARM: 6023/1: update bcmring_defconfig to latest version and fix build errorLeo Chen
update bcmring_defconfig to the latest kernel version, this will fix the KAutobuild error. Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22security: testing the wrong variable in create_by_name()Dan Carpenter
There is a typo here. We should be testing "*dentry" instead of "dentry". If "*dentry" is an ERR_PTR, it gets dereferenced in either mkdir() or create() which would cause an OOPs. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-04-22smbfs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22ncpfs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22exofs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22ecryptfs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22coda: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22cifs: add bdi backing to mount sessionJens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22afs: add bdi backing to mount session.Jens Axboe
This ensures that dirty data gets flushed properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>