summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-02-25Bluetooth: Remove duplicated BT_INFO() from L2CAPGustavo F. Padovan
The message for the initialization of the L2CAP layer was being printed twice. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25Bluetooth: remove unnecessary call to hci_sock_cleanupAnand Gadiyar
hci_sock_cleanup is already called after the sock_err label. It appears that we can drop this call. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-22Bluetooth: fix build break on hci_sock.cAnand Gadiyar
Linux-next as of 20110217 complains when building for OMAP1. LD vmlinux `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o make: *** [vmlinux] Error 1 A recent patch by Gustavo (Bluetooth: Merge L2CAP and SCO modules into bluetooth.ko) introduced this by calling the hci_sock_cleanup function in the error path of bt_init. Fix this by dropping the __exit marking for hci_sock_cleanup. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix LE conn creationAnderson Briglia
This patch prevents a crash when remote host tries to create a LE link which already exists. i.e.: call l2test twice passing the same parameters. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix unnecessary list traversal in mgmt_pending_removeJohan Hedberg
All of the places that need to call mgmt_pending_remove already have a pointer to the pending command, so searching for the command in the list doesn't make sense. The added benefit is that many places that previously had to call list_del + mgmt_pending_free can just call mgmt_pending_remove now. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix inititial value for remote authentication requirementsJohan Hedberg
The remote authentication requirements for conections need to be initialized to 0xff (unknown) since it is possible that we receive a IO Capability Request before we have received information about the remote requirements. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_auth_failed eventJohan Hedberg
To properly track bonding completion an event to indicate authentication failure is needed. This event will be sent whenever an authentication complete HCI event with a non-zero status comes. It will also be sent when we're acting in acceptor role for SSP authentication in which case the controller will send a Simple Pairing Complete event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply return parametersJohan Hedberg
The command complete event for mgmt_pin_code_reply & mgmt_pin_code_neg_reply should have the adapter index, Bluetooth address as well as the status. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply command status opcodeJohan Hedberg
The opcode for the ENODEV case was wrong (probably copy-paste mistake). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add management support for user confirmation requestJohan Hedberg
This patch adds support for the user confirmation (numeric comparison) Secure Simple Pairing authentication method. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_pair_device commandJohan Hedberg
This patch adds a new mgmt_pair_device which can be used to initiate a dedicated bonding procedure. Some extra callbacks are added to the hci_conn struct so that the pairing code can get notified of the completion of the procedure. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Make pending_add return a pointer to the added entryJohan Hedberg
This makes it more convenient to do manipulations on the entry (needed by later commits). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-18mac80211: Clear PS related flag on disabling power save.Vivek Natarajan
Clear IEEE80211_STA_NULLFUNC_ACKED flag on disabling power save. Without this fix, there is a chance of setting CONF_PS before sending nullfunc frame. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_hw: Updates for AR9485 1.1 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath9k_htc: Fix a compilation warning.Vivek Natarajan
Initialize caldata to avoid compilation warning. CC [M] drivers/net/wireless/ath/ath9k/htc_drv_main.o drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function ‘ath9k_htc_config’: drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: warning: ‘caldata’ may be used uninitialized in this function drivers/net/wireless/ath/ath9k/htc_drv_main.c:172: note: ‘caldata’ was declared here Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18small adjustment to net/mac80211/KconfigJan Beulich
"def_bool n" without prompt is pointless, this should be just "bool". Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: reset device only if it was enabledRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: when needed, reject IM input while disabling deviceRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: implement flush callbackChristian Lamparter
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: remove invalid define SSB_TMSLOW_PHYCLKRafał Miłecki
It was incorrectly introduced in d2730b2a6a019d14455556019d744ab051e6554b. We have already fixed function to use correct define, but forgot remove old one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: trivial: fix SPROM extract warning formattingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix 2.4 GHz 40 MHz disablingJohannes Berg
The module parameter ieee80211_disable_40mhz_24ghz was meant to allow disabling 40 MHz operation in the 2.4 GHz band by default. However, it is buggy as implemented because while it advertises to the AP that the device doesn't support 40 MHz, it will itself still use 40 MHz configurations. To fix this, clear the 40 MHz bits from the sband completely instead of overriding where used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18wireless-next-2.6: brcm80211: fix compile issueHenry Ptasinski
Commit 59eb21a65047 "cfg80211: Extend channel to frequency mapping for 802.11j" changed the definition of the ieee80211_channel_to_frequency; so fix its usage in brcmfmac. Signed-off-by: Stanislav Fomichev <kernel@fomichev.me> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: Add power to debugfs.Ben Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18p54: Fix compile warningLarry Finger
If any of the p54-based drivers are built with CONFIG_P54_LEDS not defined, the following warning is generated: CC [M] drivers/net/wireless/p54/main.o drivers/net/wireless/p54/main.c: In function ‘p54_register_common’: drivers/net/wireless/p54/main.c:614:21: warning: unused variable ‘priv’ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ath5k: move external function definitions to a header fileBob Copeland
Johannes pointed out the mess of external function prototypes in the mac80211-ops.c file. Woe to anyone who changes these functions... Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: Make ssb_wait_bit multi-bit safeMichael Büsch
ssb_wait_bit was designed for only one-bit bitmasks. People start using it for multi-bit bitmasks. Make the "set" case is safe for this. The "unset" case is already safe. This does not change behavior of the current code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-02-18ath5k: Correct channel setting for AR2317 chipNikolay Ledovskikh
Correct channel setting function must be used for AR2317. When I tested ahb patch on bullet2 all seemed to work fine, but it couldn't connect another host (using ibss for example). During an analysis I observed that it's transmitting on another channel. I looked into madwifi code and understood that the problem is in channel setting function. So atheros RF2317 not fully handled in the current ath5k version and must be patched. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18wireless: rt2x00: rt2800pci.c: add two idsXose Vazquez Perez
taken two RT35XX EDIMAX from DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18mac80211: fix conn_mon_timer running after disassociateStanislaw Gruszka
Low level driver could pass rx frames to us after disassociate, what can lead to run conn_mon_timer by ieee80211_sta_rx_notify(). That is obviously wrong, but nothing happens until we unload modules and resources are used after free. If kernel debugging is enabled following warning could be observed: WARNING: at lib/debugobjects.c:259 debug_print_object+0x65/0x70() Hardware name: HP xw8600 Workstation ODEBUG: free active (active state 0) object type: timer_list Modules linked in: iwlagn(-) iwlcore mac80211 cfg80211 aes_x86_64 aes_generic fuse cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext3 jbd dm_mirror dm_region_hash dm_log dm_mod uinput hp_wmi sparse_keymap sg wmi arc4 microcode serio_raw ecb tg3 shpchp rfkill ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif firewire_ohci firewire_core crc_itu_t mptsas mptscsih mptbase scsi_transport_sas ahci libahci pata_acpi ata_generic ata_piix floppy nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core video [last unloaded: cfg80211] Pid: 13827, comm: rmmod Tainted: G W 2.6.38-rc4-wl+ #22 Call Trace: [<ffffffff810649cf>] ? warn_slowpath_common+0x7f/0xc0 [<ffffffff81064ac6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff81226fc5>] ? debug_print_object+0x65/0x70 [<ffffffff81227625>] ? debug_check_no_obj_freed+0x125/0x210 [<ffffffff8109ebd7>] ? debug_check_no_locks_freed+0xf7/0x170 [<ffffffff81156092>] ? kfree+0xc2/0x2f0 [<ffffffff813ec5c5>] ? netdev_release+0x45/0x60 [<ffffffff812f1067>] ? device_release+0x27/0xa0 [<ffffffff81216ddd>] ? kobject_release+0x8d/0x1a0 [<ffffffff81216d50>] ? kobject_release+0x0/0x1a0 [<ffffffff812183b7>] ? kref_put+0x37/0x70 [<ffffffff81216c57>] ? kobject_put+0x27/0x60 [<ffffffff813d5d1b>] ? netdev_run_todo+0x1ab/0x270 [<ffffffff813e771e>] ? rtnl_unlock+0xe/0x10 [<ffffffffa0581188>] ? ieee80211_unregister_hw+0x58/0x120 [mac80211] [<ffffffffa0377ed7>] ? iwl_pci_remove+0xdb/0x22a [iwlagn] [<ffffffff8123cde2>] ? pci_device_remove+0x52/0x120 [<ffffffff812f5205>] ? __device_release_driver+0x75/0xe0 [<ffffffff812f5348>] ? driver_detach+0xd8/0xe0 [<ffffffff812f4111>] ? bus_remove_driver+0x91/0x100 [<ffffffff812f5b62>] ? driver_unregister+0x62/0xa0 [<ffffffff8123d194>] ? pci_unregister_driver+0x44/0xa0 [<ffffffffa0377df5>] ? iwl_exit+0x15/0x1c [iwlagn] [<ffffffff810ab492>] ? sys_delete_module+0x1a2/0x270 [<ffffffff81498889>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8100bf42>] ? system_call_fastpath+0x16/0x1b Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2011-02-17Bluetooth: fix checkpatch errors in af_bluetooth.cGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: fix errors reported by checkpatch.plGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_event.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.cSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Fix some code style issues in hci_core.hSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Clean up hci_sniff_subrate_evt functionSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-17Bluetooth: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>Szymon Janc
As warned by checkpatch.pl, use #include <linux/uaccess.h> instead of <asm/uaccess.h>. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Send LE Connection Update CommandClaudio Takahasi
If the new connection update parameter are accepted, the LE master host sends the LE Connection Update Command to its controller informing the new requested parameters. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use proper timer for hci command timoutVille Tervo
Use proper timer instead of hci command flow control to timeout failed hci commands. Otherwise stack ends up sending commands when flow control is used to block new commands. 2010-09-01 18:29:41.592132 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:16:CF:E1:C7:D7 mode 2 clkoffset 0x0000 2010-09-01 18:29:41.592681 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 0 2010-09-01 18:29:51.022033 < HCI Command: Remote Name Request Cancel (0x01|0x001a) plen 6 bdaddr 00:16:CF:E1:C7:D7 Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Make hci a child of the corresponding tty device.Andrei Warkentin
Make /sys/class/bluetooth/hciX a symlink to path under corresponding tty. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Fix crash when ioctl(HCIUARTSETPROTO) failsGustavo F. Padovan
If the fail happens the HCI del_timer may timeout after the the hci dev unregister. This lead to a kernel crash. Reported-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add connection parameter update responseClaudio Takahasi
Implements L2CAP Connection Parameter Update Response defined in the Bluetooth Core Specification, Volume 3, Part A, section 4.21. Address the LE Connection Parameter Procedure initiated by the slave. Connection Interval Minimum and Maximum have the same range: 6 to 3200. Time = N * 1.25ms. Minimum shall be less or equal to Maximum. The Slave Latency field shall have a value in the range of 0 to ((connSupervisionTimeout / connIntervalMax) - 1). Latency field shall be less than 500. connSupervisionTimeout = Timeout Multiplier * 10 ms. Multiplier field shall have a value in the range of 10 to 3200. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add LE signaling commands handlingClaudio Takahasi
This patch splits the L2CAP command handling function in order to have a clear separation between the commands related to BR/EDR and LE. Commands and responses in the LE signaling channel are not being handled yet, command reject is sent to all received requests. Bluetooth Core Specification, Volume 3, Part A, section 4 defines the signaling packets formats and allowed commands/responses over the LE signaling channel. Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Use usb_fill_int_urb()Gustavo F. Padovan
Instead set urb structure directly we call usb_fill_int_urb() to set the values to us. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Add SMP command structuresVille Tervo
Add command structures for security manager protocol. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Treat LE and ACL links separately on timeoutVille Tervo
Separate LE and ACL timeouts. Othervise ACL connections on non LE hw will time out after 45 secs. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-16 04:47:51 +0000