summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-03-10libipw: split ieee->networks into small piecesZhu Yi
The ieee->networks consists of 128 struct libipw_network entries. If we allocate this chunk of memory altogether, it ends up with an order 4 page allocation. High order page allocation is likely to fail on system high load. This patch splits the big chunk memory allocation into small pieces, each is 344 bytes, allocates them with 128 times. The patch fixed bug http://bugzilla.kernel.org/show_bug.cgi?id=14989 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix sta_mtx unlocking on insert STA failure pathJouni Malinen
Commit 34e895075e21be3e21e71d6317440d1ee7969ad0 introduced sta_mtx locking into sta_info_insert() (now sta_info_insert_rcu), but forgot to unlock this mutex on one of the error paths. Fix this by adding the missing mutex_unlock() call for the case where STA insert fails due to an entry existing already. This may happen at least in AP mode when a STA roams between two BSSes (vifs). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rt2x00: remove KSEG1ADDR define from rt2x00soc.hHelmut Schaa
Remove the KSEG1ADDR define from rt2x00soc.h as it redefines and covers the correct one from the arch/mips/include/asm/addrspace.h. Otherwise the driver oopses on the target platform (Ralink rt3050 board). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10uartlite: Fix build on sparc.David Miller
We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-10NFSv4: Don't ignore the NFS_INO_REVAL_FORCED flag in nfs_revalidate_inode()Trond Myklebust
If the NFS_INO_REVAL_FORCED flag is set, that means that we don't yet have an up to date attribute cache. Even if we hold a delegation, we must put a GETATTR on the wire. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-03-10net: add ColdFire support to the smc91x driverGreg Ungerer
Some embedded ColdFire based boards use the SMC 91x family of ethernet devices. (For example the Freescale M5249C3 and MoretonBay NETtel). Add IO access support to the SMC91x driver, and allow this driver to be configured for ColdFire platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10asix: fix setting mac address for AX88772Jussi Kivilinna
Setting new MAC address only worked when device was set to promiscuous mode. Fix MAC address by writing new address to device using undocumented command AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Hollis <dhollis@davehollis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.YOSHIFUJI Hideaki / 吉藤英明
Commit a43912ab19... ("tunnel: eliminate recursion field") eliminated use of recursion field from tunnel structures, but its definition still exists in ip6_tnl{}. Let's remove that unused field. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Fix dev_mc_add()Eric Dumazet
Commit 6e17d45a (net: add addr len check to dev_mc_add) added a bug in dev_mc_add(), since it can now exit with a lock imbalance. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Annotates neigh_invalidate()Eric Dumazet
Annotates neigh_invalidate() with __releases() and __acquires() for sparse sake. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tcp: Fix tcp_v4_rcv()Eric Dumazet
Commit d218d111 (tcp: Generalized TTL Security Mechanism) added a bug for TIMEWAIT sockets. We should not test min_ttl for TW sockets. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tg3: Fix tg3_poll_controller() passing wrong pointer to tg3_interrupt()Louis Rilling
Commit 09943a1819a240ff4a72f924d0038818fcdd0a90 Author: Matt Carlson <mcarlson@broadcom.com> Date: Fri Aug 28 14:01:57 2009 +0000 tg3: Convert ISR parameter to tnapi forgot to update tg3_poll_controller(), leading to intermittent crashes with netpoll. Fix this. Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: change checksumming default for HiperSocketsFrank Blaschka
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: enable kmsg hash processing in qeth_core_sys.cUrsula Braun
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10HID: ntrig: fix touch eventsRafi Rubin
This reinstates the lost unpressing of BTN_TOUCH. To prevent undesireably touch toggles this also deals with tip switch events. Added a trap to prevent going out of bounds for hidinputs with empty reports. Clear bits of unused buttons which result in misidentification. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-10perf: Drop the obsolete profile naming for trace eventsFrederic Weisbecker
Drop the obsolete "profile" naming used by perf for trace events. Perf can now do more than simple events counting, so generalize the API naming. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
2010-03-10perf: Take a hot regs snapshot for trace eventsFrederic Weisbecker
We are taking a wrong regs snapshot when a trace event triggers. Either we use get_irq_regs(), which gives us the interrupted registers if we are in an interrupt, or we use task_pt_regs() which gives us the state before we entered the kernel, assuming we are lucky enough to be no kernel thread, in which case task_pt_regs() returns the initial set of regs when the kernel thread was started. What we want is different. We need a hot snapshot of the regs, so that we can get the instruction pointer to record in the sample, the frame pointer for the callchain, and some other things. Let's use the new perf_fetch_caller_regs() for that. Comparison with perf record -e lock: -R -a -f -g Before: perf [kernel] [k] __do_softirq | --- __do_softirq | |--55.16%-- __open | --44.84%-- __write_nocancel After: perf [kernel] [k] perf_tp_event | --- perf_tp_event | |--41.07%-- lock_acquire | | | |--39.36%-- _raw_spin_lock | | | | | |--7.81%-- hrtimer_interrupt | | | smp_apic_timer_interrupt | | | apic_timer_interrupt The old case was producing unreliable callchains. Now having right frame and instruction pointers, we have the trace we want. Also syscalls and kprobe events already have the right regs, let's use them instead of wasting a retrieval. v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs() Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Archs <linux-arch@vger.kernel.org>
2010-03-10perf: Introduce new perf_fetch_caller_regs() for hot regs snapshotFrederic Weisbecker
Events that trigger overflows by interrupting a context can use get_irq_regs() or task_pt_regs() to retrieve the state when the event triggered. But this is not the case for some other class of events like trace events as tracepoints are executed in the same context than the code that triggered the event. It means we need a different api to capture the regs there, namely we need a hot snapshot to get the most important informations for perf: the instruction pointer to get the event origin, the frame pointer for the callchain, the code segment for user_mode() tests (we always use __KERNEL_CS as trace events always occur from the kernel) and the eflags for further purposes. v2: rename perf_save_regs to perf_fetch_caller_regs as per Masami's suggestion. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Archs <linux-arch@vger.kernel.org>
2010-03-10perf/x86-64: Use frame pointer to walk on irq and process stacksFrederic Weisbecker
We were using the frame pointer based stack walker on every contexts in x86-32, but not in x86-64 where we only use the seven-league boots on the exception stacks. Use it also on irq and process stacks. This utterly accelerate the captures. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-03-10lockdep: Move lock events under lockdep recursion protectionFrederic Weisbecker
There are rcu locked read side areas in the path where we submit a trace event. And these rcu_read_(un)lock() trigger lock events, which create recursive events. One pair in do_perf_sw_event: __lock_acquire | |--96.11%-- lock_acquire | | | |--27.21%-- do_perf_sw_event | | perf_tp_event | | | | | |--49.62%-- ftrace_profile_lock_release | | | lock_release | | | | | | | |--33.85%-- _raw_spin_unlock Another pair in perf_output_begin/end: __lock_acquire |--23.40%-- perf_output_begin | | __perf_event_overflow | | perf_swevent_overflow | | perf_swevent_add | | perf_swevent_ctx_event | | do_perf_sw_event | | perf_tp_event | | | | | |--55.37%-- ftrace_profile_lock_acquire | | | lock_acquire | | | | | | | |--37.31%-- _raw_spin_lock The problem is not that much the trace recursion itself, as we have a recursion protection already (though it's always wasteful to recurse). But the trace events are outside the lockdep recursion protection, then each lockdep event triggers a lock trace, which will trigger two other lockdep events. Here the recursive lock trace event won't be taken because of the trace recursion, so the recursion stops there but lockdep will still analyse these new events: To sum up, for each lockdep events we have: lock_*() | trace lock_acquire | ----- rcu_read_lock() | | | lock_acquire() | | | trace_lock_acquire() (stopped) | | | lockdep analyze | ----- rcu_read_unlock() | lock_release | trace_lock_release() (stopped) | lockdep analyze And you can repeat the above two times as we have two rcu read side sections when we submit an event. This is fixed in this patch by moving the lock trace event under the lockdep recursion protection. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com>
2010-03-10perf report: Print the map table just after samples for which no map was foundArnaldo Carvalho de Melo
If -vv is used just the map table will be printed, -vvv will print the symbol table too, with it we can see that we have a bug where some samples are not being resolved to a map when we get them in the perf.data stream, but after we have it all processed, we can find the right map, some reordering probably is happening. Upcoming patches will provide ways to ask for most PERF_SAMPLE_ conditional samples to be taken for !PERF_RECORD_SAMPLE events too, then we'll be able to ask for PERF_SAMPLE_TIME and PERF_SAMPLE_CPU to help diagnose this. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1268161097-17761-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf report: Add multiple event supportEric B Munson
Perf report does not handle multiple events being reported, even though perf record stores them properly on disk. This patch addresses that issue by adding the logic to perf report to use the event stream id that is saved by record and the new data structures to seperate the event streams and report them individually. Signed-off-by: Eric B Munson <ebmunson@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-6-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf session: Change perf_session post processing functions to take ↵Eric B Munson
histogram tree Now that report can store historgrams for multiple events we need to be able to do the post processing work for each histogram. This patch changes the post processing functions so that they can be called individually for each event's histogram. Signed-off-by: Eric B Munson <ebmunson@us.ibm.com> [ Guarantee bisectabilty by fixing up builtin-report.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-5-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf session: Add storage for seperating event types in reportEric B Munson
This patch adds the structures necessary to count each event type independently in perf report. Signed-off-by: Eric B Munson <ebmunson@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-4-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf session: Change add_hist_entry to take the tree root instead of sessionEric B Munson
In order to minimize the impact of storing multiple events in a report this function will now take the root of the histogram tree so that the logic for selecting the proper tree can be inserted before the call. Signed-off-by: Eric B Munson <ebmunson@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-3-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf record: Add ID and to recorded event data when recording multiple eventsEric B Munson
Currently perf record does not write the ID or the to disk for events. This doesn't allow report to tell if an event stream contains one or more types of events. This patch adds this entry to the list of data that record will write to disk if more than one event was requested. Signed-off-by: Eric B Munson <ebmunson@us.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf probe: Add missing variable initializationArnaldo Carvalho de Melo
cc1: warnings being treated as errors util/probe-finder.c: In function 'find_line_range': util/probe-finder.c:172: warning: 'src' may be used uninitialized in this function make: *** [util/probe-finder.o] Error 1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267804269-22660-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf tools: Don't trow away old map slices not overlapped by new mapsArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267800842-22324-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf: Provide better condition for event rotationPeter Zijlstra
Try to avoid useless rotation and PMU disables. [ Could be improved by keeping a nr_runnable count to better account for the < PERF_STAT_INACTIVE counters ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Fix double enable callsPeter Zijlstra
hw_perf_enable() would enable already enabled events. This causes problems with code that assumes that ->enable/->disable calls are balanced (like the LBR code does). What happens is that events that were already running and left in place would get enabled again. Avoid this by only enabling new events that match their previous assignment. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Fix double disable callsPeter Zijlstra
hw_perf_enable() would disable events that were not yet enabled. This causes problems with code that assumes that ->enable/->disable calls are balanced (like the LBR code does). What happens is that we disable newly added counters that match their previous assignment, even though they are not yet programmed on the hardware. Avoid this by only doing the first pass over the existing events. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Properly account n_addedPeter Zijlstra
Make sure n_added is properly accounted so that we can rely on the value to reflect the number of added counters. This is needed if its going to be used for more than a boolean check. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Avoid double disable on throttle vs ioctl(PERF_IOC_DISABLE)Peter Zijlstra
Calling ioctl(PERF_EVENT_IOC_DISABLE) on a thottled counter would result in a double disable, cure this by using x86_pmu_{start,stop} for throttle/unthrottle and teach x86_pmu_stop() to check ->active_mask. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Fix x86_pmu_startPeter Zijlstra
pmu::start should undo pmu::stop, make it so. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Use unlocked bitopsPeter Zijlstra
There is no concurrency on these variables, so don't use LOCK'ed ops. As to the intel_pmu_handle_irq() status bit clean, nobody uses that so remove it all together. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100304140100.240023029@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Change x86_pmu.{enable,disable} calling conventionPeter Zijlstra
Pass the full perf_event into the x86_pmu functions so that those may make use of more than the hw_perf_event, and while doing this, remove the superfluous second argument. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100304140100.165166129@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Remove superfluous arguments to x86_perf_event_update()Peter Zijlstra
The second and third argument to x86_perf_event_update() are superfluous since they are simple expressions of the first argument. Hence remove them. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100304140100.089468871@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86: Remove superfluous arguments to x86_perf_event_set_period()Peter Zijlstra
The second and third argument to x86_perf_event_set_period() are superfluous since they are simple expressions of the first argument. Hence remove them. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100304140100.006500906@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf, x86, Do not user perf_disable from NMI contextPeter Zijlstra
Explicitly use intel_pmu_{disable,enable}_all() in intel_pmu_handle_irq() to avoid the NMI race conditions in perf_{disable,enable} Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf: Optimize perf_disablePeter Zijlstra
Currently we always call hw_perf_disable(), even if its already disabled, this seems superflous, esp. since it cannot be made NMI safe (see further patches). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf: Rework and fix the arch CPU-hotplug hooksPeter Zijlstra
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug notifiers. This has the advantage of reducing the static weak interface as well as exposing all hotplug actions to the PMU. Use this to fix x86 hotplug usage where we did things in ONLINE which should have been done in UP_PREPARE or STARTING. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mundt <lethal@linux-sh.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100305154128.736225361@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10perf: Provide generic perf_sample_data initializationPeter Zijlstra
This makes it easier to extend perf_sample_data and fixes a bug on arm and sparc, which failed to set ->raw to NULL, which can cause crashes when combined with PERF_SAMPLE_RAW. It also optimizes PowerPC and tracepoint, because the struct initialization is forced to zero out the whole structure. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jean Pihet <jpihet@mvista.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Jamie Iles <jamie.iles@picochip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: stable@kernel.org LKML-Reference: <20100304140100.315416040@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-03-10Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-03-10sh: Export uncached helper symbols.Paul Mundt
oprofile and others need to get at these, so provide symbol exports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10sh: Fix up NUMA build for 29-bit.Paul Mundt
pmb_bolt_mapping() is undefined on 29-bit builds, so provide a stub. This fixes up the NUMA build on platforms lacking PMB support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-09Input: ad7877 - increase pen up imeoutMichael Hennerich
The time interval between consecutive interrupts depends on a number of tunables: first_conversion_delay, acquisition_time, averaging and foremost the pen_down_acc_interval. Since the mod_timer() action for the PEN UP event happens in the spi_async() callback function, latencies incurred by the spi bus drivers also need to be taken into account. So all in all, give the PEN UP event a bit more wiggle room and increase timeout to 100ms. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>