summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-03-14[media] Documentation: devicetree: Update Samsung FIMC DT bindingSylwester Nawrocki
This patch documents following updates of the Exynos4 SoC camera subsystem devicetree binding: - addition of #clock-cells and clock-output-names properties to 'camera' node - these are now needed so the image sensor sub-devices can reference clocks provided by the camera host interface, - dropped a note about required clock-frequency properties at the image sensor nodes; the sensor devices can now control their clock explicitly through the clk API and there is no need to require this property in the camera host interface binding. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] Documentation: dt: Add binding documentation for S5C73M3 cameraSylwester Nawrocki
This adds DT binding documentation for Samsung S5C73M3 camera sensor with an embedded ISP. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] Documentation: dt: Add binding documentation for S5K6A3 image sensorSylwester Nawrocki
This patch adds binding documentation for the Samsung S5K6A3(YX) raw image sensor. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] em28xx-audio: make sure audio is unmuted on open()Frank Schaefer
In all cases, when the first capture is called, we need to call the code that unmutes the volume. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_formatHans Verkuil
Update the DocBook files accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] DocBook media: clarify v4l2_pix_format and v4l2_pix_format_mplane fieldsHans Verkuil
Be more specific with regards to how some of these fields are interpreted. In particular the height value and which fields can be set by the application. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] v4l2-pci-skeleton: add a V4L2 PCI skeleton driverHans Verkuil
This example driver uses all the latest frameworks and can serve as a starting point for a new V4L2 PCI driver. Originally written for a presentation on how to use V4L2 frameworks during FOSDEM 2014. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rc: img-ir: hw: Fix min/max bits setupJames Hogan
The calculated values for the minlen and maxlen fields, which were rounded to multiples of 2 and clamped to a valid range, were left unused. Use them in the calculation of the register value rather than using the raw input minlen and maxlen. This fixes the following warning with a W=1 build: drivers/media/rc/img-ir/img-ir-hw.c In function ‘img_ir_free_timing’: drivers/media/rc/img-ir/img-ir-hw.c +228 :23: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable] drivers/media/rc/img-ir/img-ir-hw.c +228 :15: warning: variable ‘minlen’ set but not used [-Wunused-but-set-variable] Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rc: img-ir: jvc: Remove unused no-leader timingsJames Hogan
The JVC timings included timings intended for the secondary decoder (which matches messages with no leader), however they were in the wrong part of the timings structure, repeating s00 and s01 rather than being in s10 and s11. Distinct repeat timings can't be properly supported yet for JVC anyway since the scancode callback cannot determine which decoder matched the message, so for now remove these timings and don't bother to enable the secondary decoder. This fixes the following warnings with W=1: drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: (near initialization for ‘img_ir_jvc.timings.s00’) [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: (near initialization for ‘img_ir_jvc.timings.s01’) [-Woverride-init] Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rc: img-ir: hw: Remove unnecessary semi-colonJames Hogan
Fix a coccicheck warning in img-ir driver: drivers/media/rc/img-ir/img-ir-hw.c:500:2-3: Unneeded semicolon Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] media: davinci: vpbe: fix build warningLad, Prabhakar
this patch fixes following build warning drivers/media/platform/davinci/vpbe_display.c: In function 'vpbe_start_streaming': drivers/media/platform/davinci/vpbe_display.c:344: warning: unused variable 'vpbe_dev' Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] MAINTAINERS: add rtl2832_sdr driverAntti Palosaari
Realtek RTL2832 SDR driver. Currently in staging as SDR API is not ready. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl2832_sdr: clamp bandwidth to nearest legal value in automodeAntti Palosaari
Clamp bandwidth to nearest legal value in automode in order to pass v4l2-compliance test. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl2832_sdr: fixing v4l2-compliance issuesHans Verkuil
Fix rtl2832_sdr driver v4l2-compliance issues. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: rename some variablesAntti Palosaari
Rename some variables. Change error status checks from (ret < 0) to (ret). No actual functionality changes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: convert to Regmap APIAntti Palosaari
That comes possible after driver was converted to kernel I2C model (I2C binding & proper I2C client with no gate control hack). All nasty low level I2C routines are now covered by regmap. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: get rid of DVB i2c_gate_ctrl()Antti Palosaari
Gate control is now implemented by rtl2832 I2C adapter so we do not need proprietary DVB i2c_gate_ctrl() anymore. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl28xxu: use muxed RTL2832 I2C adapters for E4000 and RTL2832_SDRAntti Palosaari
RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate control. Pass those adapters to rtl2832_sdr and e4000 modules in order to get rid of proprietary DVB .i2c_gate_ctrl() callback use. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl28xxu: depends on I2C_MUXAntti Palosaari
We need depend on I2C_MUX as rtl2832 demod used requires it. All error/warnings: warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX) ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl28xxu: fix switch-case style issueAntti Palosaari
Use break, not return, for every case. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl28xxu: attach SDR extension moduleAntti Palosaari
With that extension module it supports SDR. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl28xxu: constify demod config structsAntti Palosaari
Optimize a little bit from data to text. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl2832_sdr: expose e4000 controls to userAntti Palosaari
E4000 tuner driver provides now some controls. Expose those to userland. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] rtl2832_sdr: Realtek RTL2832 SDR driver moduleAntti Palosaari
Implement SDR driver for Realtek RTL2832U chip as a DVB extension module. SDR module is attached by DVB USB RTL28XXU driver as a DVB SEC (satellite equipment controller) module. Abusing unused SEC here has no harm as that is DVB-T only frontend. SDR functionality is provided by RTL2832 DVB-T demodulator. I suspect it is originally planned for DAB and FM, but it could be abused general SDR, due to modern silicon tuners that has wide frequency range and a lot of configurable parameters (filters, gains, ...). http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/44461 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: implement PLL lock v4l controlAntti Palosaari
Implement PLL lock control to get PLL lock flag status from tuner synthesizer. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: fix PLL calc to allow higher frequenciesAntti Palosaari
There was 32-bit overflow on VCO frequency calculation which blocks tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO frequency overflow. After that fix device in question tunes to following range: 60 - 1104 MHz 1250 - 2207 MHz Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: implement controls via v4l2 control frameworkAntti Palosaari
Implement gain and bandwidth controls using v4l2 control framework. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-14[media] e4000: convert DVB tuner to I2C driver modelAntti Palosaari
Driver conversion from proprietary DVB tuner model to more general I2C driver model. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] media: rc-core: use %s in rc_map_get() module loadKees Cook
rc_map_get() takes a single string literal for the module to load, so make sure it cannot be used as a format string in the call to request_module(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook media: fix broken FIELD_ALTERNATE descriptionHans Verkuil
The sizeimage is that of a single field, not that of a full frame. That makes no sense, and in fact all drivers supporting ALTERNATE will set sizeimage to that of a field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook media: clarify v4l2_buffer/plane fieldsHans Verkuil
Be more specific as to who has to fill in each field/flag: the driver or the application. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook: fix incorrect code exampleHans Verkuil
The code said for (i = 0; i > 30; ++i) instead of i < 30. Fix this and clean it up a bit at the same time. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook media: update STREAMON/OFF documentationHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] v4l: rename v4l2_format_sdr to v4l2_sdr_formatAntti Palosaari
Rename v4l2_format_sdr to v4l2_sdr_format in order to keep it in line with other formats. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi3101: fix v4l2-compliance issuesAntti Palosaari
Fix msi3101 driver v4l2-compliance issues. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi001: fix v4l2-compliance issuesAntti Palosaari
Fix msi001 driver v4l2-compliance issues. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi3101: clamp mmap buffers to reasonable levelAntti Palosaari
That value is coming from the user and we need only ensure it is reasonable. That was pointed by Hans when reviewing rtl2832_sdr driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] MAINTAINERS: add msi3101 driverAntti Palosaari
Mirics MSi2500 (MSi3101) SDR ADC + USB interface driver. Currently in staging as SDR API is not ready. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] MAINTAINERS: add msi001 driverAntti Palosaari
Mirics MSi001 silicon tuner driver. Currently in staging as SDR API is not ready. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi3101: use msi001 tuner driverAntti Palosaari
Remove MSi001 RF tuner related code as MSi001 functionality is moved to own driver. Implement SPI master adapter. Attach MSi001 driver via SPI / V4L subdev framework. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi001: Mirics MSi001 silicon tuner driverAntti Palosaari
That RF tuner driver is bound via SPI bus model and it implements V4L subdev API. I split it out from MSi3101 SDR driver. MSi3101 = MSi2500 + MSi001. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] msi3101: convert to SDR APIAntti Palosaari
Massive rewrite. Use SDR API. Fix bugs. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] v4l: add control for RF tuner PLL lock flagAntti Palosaari
Add volatile boolean control to indicate if tuner frequency synthesizer is locked to requested frequency. That means tuner is able to receive given frequency. Control is named as "PLL lock", since frequency synthesizers are based of phase-locked-loop. Maybe more general name could be wise still? Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook: media: document PLL lock controlAntti Palosaari
Document PLL lock V4L2 control. It is read only RF tuner control which is used to inform if tuner is receiving frequency or not. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] v4l: add enum_freq_bands support to tuner sub-deviceAntti Palosaari
Add VIDIOC_ENUM_FREQ_BANDS, enumerate supported frequency bands, IOCTL support for sub-device tuners too. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] v4l: uapi: add SDR formats CU8 and CU16LEAntti Palosaari
V4L2_SDR_FMT_CU8 — Complex unsigned 8-bit IQ sample V4L2_SDR_FMT_CU16LE — Complex unsigned 16-bit little endian IQ sample Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook: V4L: add V4L2_SDR_FMT_CU16LE - 'CU16'Antti Palosaari
Document V4L2_SDR_FMT_CU16LE format. It is complex unsigned 16-bit little endian IQ sample. Used by software defined radio devices. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook: V4L: add V4L2_SDR_FMT_CU8 - 'CU08'Antti Palosaari
Document V4L2_SDR_FMT_CU8 SDR format. It is complex unsigned 8-bit IQ sample. Used by software defined radio devices. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] DocBook: media: add some general info about RF tunersAntti Palosaari
Add some info what is RF tuner in context of V4L RF tuner class. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-13[media] v4l: reorganize RF tuner control ID numbersAntti Palosaari
It appears that controls are ordered by ID number when enumerating. That could lead illogical UI as controls are usually enumerated and drawn by the application at runtime. Change order of controls by reorganizing assigned IDs now as we can. It is not reasonable possible after the API is released. Also, leave some spare space between IDs too for possible future extensions. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-26 23:14:34 +0000