summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-07-02stmmac: dity-up and rework the driver debug levelsGiuseppe CAVALLARO
Prior this patch, the internal debugging was based on ifdef and also some printk were useless because many info are exposed via ethtool. This patch remove all the ifdef defines and now we only use netif_msg_XXX levels. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02core/dev: set pkt_type after eth_type_trans() in dev_forward_skb()Isaku Yamahata
The dev_forward_skb() assignment of pkt_type should be done after the call to eth_type_trans(). ip-encapsulated packets can be handled by localhost. But skb->pkt_type can be PACKET_OTHERHOST when packet comes via veth into ip tunnel device. In that case, the packet is dropped by ip_rcv(). Although this example uses gretap. l2tp-eth also has same issue. For l2tp-eth case, add dummy device for ip address and ip l2tp command. netns A | root netns | netns B veth<->veth=bridge=gretap <-loop back-> gretap=bridge=veth<->veth arp packet -> pkt_type BROADCAST------------>ip_rcv()------------------------> <- arp reply pkt_type ip_rcv()<-----------------OTHERHOST drop sample operations ip link add tapa type gretap remote 172.17.107.4 local 172.17.107.3 ip link add tapb type gretap remote 172.17.107.3 local 172.17.107.4 ip link set tapa up ip link set tapb up ip address add 172.17.107.3 dev tapa ip address add 172.17.107.4 dev tapb ip route get 172.17.107.3 > local 172.17.107.3 dev lo src 172.17.107.3 > cache <local> ip route get 172.17.107.4 > local 172.17.107.4 dev lo src 172.17.107.4 > cache <local> ip link add vetha type veth peer name vetha-peer ip link add vethb type veth peer name vethb-peer brctl addbr bra brctl addbr brb brctl addif bra tapa brctl addif bra vetha-peer brctl addif brb tapb brctl addif brb vethb-peer brctl show > bridge name bridge id STP enabled interfaces > bra 8000.6ea21e758ff1 no tapa > vetha-peer > brb 8000.420020eb92d5 no tapb > vethb-peer ip link set vetha-peer up ip link set vethb-peer up ip link set bra up ip link set brb up ip netns add a ip netns add b ip link set vetha netns a ip link set vethb netns b ip netns exec a ip address add 10.0.0.3/24 dev vetha ip netns exec b ip address add 10.0.0.4/24 dev vethb ip netns exec a ip link set vetha up ip netns exec b ip link set vethb up ip netns exec a arping -I vetha 10.0.0.4 ARPING 10.0.0.4 from 10.0.0.3 vetha ^CSent 2 probes (2 broadcast(s)) Received 0 response(s) Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Hong Zhiguo <honkiko@gmail.com> Cc: Rami Rosen <ramirose@gmail.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Jesse Gross <jesse@nicira.com> Cc: dev@openvswitch.org Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: convert lls to use time_in_range()Eliezer Tamir
Time in range will fail safely if we move to a different cpu with an extremely large clock skew. Add time_in_range64() and convert lls to use it. changelog: v2 - fixed double call to sched_clock in can_poll_ll - fixed checkpatchisms Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02nlmon: use standard rtnetlink link api for add/del devicesJiri Pirko
It is not nice when netdev is created right after module load and with some implicit name. So rather change nlmon to use standard rtnl link API. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_sizeHannes Frederic Sowa
If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c1833797a5a6ec23ea9261d979aa18078720b74 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET ↵Hannes Frederic Sowa
pending data We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix RMON registers on imx6Jim Baxter
commit 38ae92d "fec: Add support for reading RMON registers" causes the imx6Q to crash. This fixes it by only enabling the RMON registers, the registers are already cleared by the MAC being reset. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02cxgb3: Missing rtnl lock in error recoveryBenjamin Herrenschmidt
When exercising error injection on IBM pseries machine, I hit the following warning: [ 251.450043] RTAS: event: 89, Type: Platform Error, Severity: 2 [ 253.549822] cxgb3 0006:01:00.0: enabling device (0140 -> 0142) [ 253.713560] cxgb3 0006:01:00.0: adapter recovering, PEX ERR 0x100 [ 254.895437] RTNL: assertion failed at net/core/dev.c (2031) [ 254.895467] CPU: 6 PID: 5449 Comm: eehd Tainted: G W 3.10.0-rc7-00157-gea461ab #19 [ 254.895474] Call Trace: [ 254.895483] [c000000fac56f7d0] [c000000000014dcc] .show_stack+0x7c/0x1f0 (unreliable) [ 254.895493] [c000000fac56f8a0] [c0000000007ba318] .dump_stack+0x28/0x3c [ 254.895500] [c000000fac56f910] [c0000000006c0384] .netif_set_real_num_tx_queues+0x224/0x230 [ 254.895515] [c000000fac56f9b0] [d00000000ef35510] .cxgb_open+0x80/0x3f0 [cxgb3] [ 254.895525] [c000000fac56fa50] [d00000000ef35914] .t3_resume_ports+0x94/0x100 [cxgb3] [ 254.895533] [c000000fac56fae0] [c00000000005fc8c] .eeh_report_resume+0x8c/0xd0 [ 254.895539] [c000000fac56fb60] [c00000000005e9fc] .eeh_pe_dev_traverse+0x9c/0x190 [ 254.895545] [c000000fac56fc10] [c000000000060000] .eeh_handle_event+0x110/0x330 [ 254.895551] [c000000fac56fca0] [c000000000060350] .eeh_event_handler+0x130/0x1a0 [ 254.895558] [c000000fac56fd30] [c0000000000ad758] .kthread+0xe8/0xf0 [ 254.895566] [c000000fac56fe30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x80 It appears that t3_resume_ports() is called with the rtnl_lock held from the fatal error task but not from the PCI error callbacks. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: cdc_ether: allow combined control and data interfaceBjørn Mork
Some Icera based Huawei modems handled by this driver are not completely CDC ECM compliant, using the same USB interface for both control and data. The CDC functional descriptors include a Union naming this interface as both master and slave, so it is supportable by relaxing the descriptor parsing in case these interfaces are identical. This has been tested on a Huawei K3806 and verified to add support for that device. Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: fec: Fix Transmitted bytes counterJim Baxter
The tx_bytes field was not being updated so the network card statistics showed 0.0B transmitted. Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipip: fix a regression in ioctlCong Wang
This is a regression introduced by commit fd58156e456d9f68fe0448 (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02l2tp: add missing .owner to struct pppox_protoWei Yongjun
Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: ethernet: davinci_emac: remove redundant dev_err call in ↵Wei Yongjun
davinci_emac_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02xen-netback: xenbus.c: use more current logging stylesWei Liu
Convert one printk to pr_<level>. Add a missing newline in several places to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ipv4: remove fib_update_nh_saddrs() declaration.Rami Rosen
This patch removes the fib_update_nh_saddrs() declaration from include/net/ip_fib.h, as the fib_update_nh_saddrs() method was removed in coomit 436c3b6 ("ipv4: Invalidate nexthop cache nh_saddr more correctly"). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: ipheth: Add USB ID for iPad miniAaron Marburg
Adds the USB device ID (0x12ab) to the ipheth network-over-USB-tethering driver for iOS devices. Applied and tested against mainline tag v3.10 (as well as 3.8.x and 3.6.y kernel for Raspbian on Raspberry pi) Signed-off-by: Aaron Marburg <amarburg@notetofutureself.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: sctp: prevent checksum.h from double inclusionDaniel Borkmann
The header file checksum.h is missing proper defines that prevents it from double inclusion. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02tools: selftests: psock_tpacket: get rid of macro wrappersDaniel Borkmann
The TPACKET_V3 test code consists of a lot of unecessary macro wrappers that rather obfuscate what members are accessed in what way. So get rid of them and make the code more readable. Also credit Chetan for providing tpacket_v3 example code. Furthermore, get rid of private offset usage, as we do not need it here. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02ethtool: make .get_dump_data() harder to misuse by driversMichal Schmidt
As the patch "bnx2x: remove zeroing of dump data buffer" showed, it is too easy implement .get_dump_data incorrectly in a driver. Let's make sure drivers cannot get confused by userspace requesting a too big dump. Also WARN if the driver sets dump->len to something weird and make sure the length reported to userspace is the actual length of data copied to userspace. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: fill in sane dump flag informationMichal Schmidt
bnx2x did not set dump->version in its .get_dump_flag() method. Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice number (0x50acff01 currently), but at least it's something deterministic. dump->flag should report the value previously set using ethtool -W. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: fix dump flag handlingMichal Schmidt
bnx2x interprets the dump flag as an index of a register preset. It is important to validate the index to avoid out of bounds memory accesses. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02bnx2x: remove zeroing of dump data bufferMichal Schmidt
There is no need to initialize the dump data with zeros. data is allocated with vzalloc, so it's already zero-filled. More importantly, the memset is harmful, because dump->len (the length requested by userspace) can be bigger than the allocated buffer (whose size is determined by asking the driver's .get_dump_flag method). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-02net: sctp: get rid of SCTP_DBG_TSNS entirelyDaniel Borkmann
After having reworked the debugging framework, Neil and Vlad agreed to get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons: We can use systemtap scripts to investigate these things, we now have pr_debug() helpers that make life easier, and if we really need anything else besides those tools, we will be forced to come up with something better than we have there. Therefore, get rid of this ifdef debugging code entirely for now. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01cassini: Make missing firmware non-fatalBen Hutchings
The firmware patch for the Saturn PHY fixes a bug, but is not absolutely essential. And its licence is unclear, so it is not included in all distributions. Just log an error message and continue if it is missing or invalid. References: http://bugs.debian.org/712674 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Jose Andres Arias Velichko <Andres.Arias@PaisLinux.net> (against 3.2) Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01qmi_wwan: add ONDA MT689DC device ID (fwd)Enrico Mioso
Another QMI-speaking device by ZTE, re-branded by ONDA! I'm connected ovr this device's QMI interface right now, so I can say I tested it! :) Note: a follow-up patch was posted to the linux-usb mailing list, to prevent the option driver from binding to the device's QMI interface, making it unusable. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01ipv6,mcast: always hold idev->lock before mca_lockAmerigo Wang
dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by: dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Ding Tianhong <dingtianhong@huawei.com> Tested-by: Chen Weilong <chenweilong@huawei.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01vti: remove duplicated code to fix a memory leakCong Wang
vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Saurabh Mohan <saurabh.mohan@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01gre: fix a regression in ioctlCong Wang
When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c54419321455631079c7d ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: sctp: rework debugging framework to use pr_debug and friendsDaniel Borkmann
We should get rid of all own SCTP debug printk macros and use the ones that the kernel offers anyway instead. This makes the code more readable and conform to the kernel code, and offers all the features of dynamic debbuging that pr_debug() et al has, such as only turning on/off portions of debug messages at runtime through debugfs. The runtime cost of having CONFIG_DYNAMIC_DEBUG enabled, but none of the debug statements printing, is negligible [1]. If kernel debugging is completly turned off, then these statements will also compile into "empty" functions. While we're at it, we also need to change the Kconfig option as it /now/ only refers to the ifdef'ed code portions in outqueue.c that enable further debugging/tracing of SCTP transaction fields. Also, since SCTP_ASSERT code was enabled with this Kconfig option and has now been removed, we transform those code parts into WARNs resp. where appropriate BUG_ONs so that those bugs can be more easily detected as probably not many people have SCTP debugging permanently turned on. To turn on all SCTP debugging, the following steps are needed: # mount -t debugfs none /sys/kernel/debug # echo -n 'module sctp +p' > /sys/kernel/debug/dynamic_debug/control This can be done more fine-grained on a per file, per line basis and others as described in [2]. [1] https://www.kernel.org/doc/ols/2009/ols2009-pages-39-46.pdf [2] Documentation/dynamic-debug-howto.txt Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs] format specifierDaniel Borkmann
In order to avoid making code that deals with printing both, IPv4 and IPv6 addresses, unnecessary complicated as for example ... if (sa.sa_family == AF_INET6) printk("... %pI6 ...", ..sin6_addr); else printk("... %pI4 ...", ..sin_addr.s_addr); ... it would be better to introduce a format specifier that can deal with those kind of situations internally; just as we have a "struct sockaddr" for generic mapping into "struct sockaddr_in" or "struct sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could reduce the above statement into something like: printk("... %pIS ..", &sockaddr); In case our pointer is NULL, pointer() then deals with that already at an earlier point in time internally. While we're at it, support for both %piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free. Additionally to that, postfix specifiers 'p', 'f' and 's' are supported as suggested and initially implemented in 2009 by Joe Perches [1]. Handling of those additional specifiers orientate on the initial RFC that was proposed. Also we support IPv6 compressed format specified by 'c' and various other IPv4 extensions as stated in the documentation part. Likely, there are many other areas than just SCTP in the kernel to make use of this extension as well. [1] http://patchwork.ozlabs.org/patch/31480/ Signed-off-by: Daniel Borkmann <dborkman@redhat.com> CC: Joe Perches <joe@perches.com> CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/vxlan-next Stephen Hemminger says: ==================== Here is current updates for vxlan in net-next. It includes Mike's changes to handle multiple destinations and lots of little cosmetic stuff. This is a fresh vxlan-next repository which was forked from net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: Swap ver and type in pppoe_hdrChangli Gao
Ver and type in pppoe_hdr should be swapped as defined by RFC2516 section-4. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01x25: Fix broken locking in ioctl error paths.Dave Jones
Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning: ================================================ [ BUG: lock held when returning to user space! ] 3.10.0-rc7+ #36 Not tainted ------------------------------------------------ trinity-child2/31407 is leaving the kernel with locks still held! 1 lock held by trinity-child2/31407: #0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25] Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01netem: use rb tree to implement the time queueEric Dumazet
Following typical setup to implement a ~100 ms RTT and big amount of reorders has very poor performance because netem implements the time queue using a linked list. ----------------------------------------------------------- ETH=eth0 IFB=ifb0 modprobe ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 action mirred egress \ redirect dev $IFB ethtool -K $ETH gro off tso off gso off tc qdisc add dev $IFB root netem delay 50ms 10ms limit 100000 tc qd add dev $ETH root netem delay 50ms limit 100000 --------------------------------------------------------- Switch netem time queue to a rb tree, so this kind of setup can work at high speed. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: add TP-LINK MA260Bjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: add Option GTM681WBjørn Mork
A standard Gobi 3000 reference design module. Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: qmi_wwan: fixup Sierra Wireless MC8305 entryBjørn Mork
The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by: Lana Black <sickmind@lavabit.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: avoid calling sched_clock when LLS is offEliezer Tamir
Change Low Latency Sockets code for select and poll so that when LLS is disabled sched_clock() is never called. Also, avoid sending POLL_LL to sockets if disabled. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: fix LLS debug_smp_processor_id() warningEliezer Tamir
Our use of sched_clock is OK because we don't mind the side effects of calling it and occasionally waking up on a different CPU. When CONFIG_DEBUG_PREEMPT is on, disable preempt before calling sched_clock() so we don't trigger a debug_smp_processor_id() warning. Reported-by: Cody P Schafer <devel-lists@codyps.com> Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01neighbour: fix a race in neigh_destroy()Eric Dumazet
There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: stmmac: fixed enh_desc set always zeroByungho An
This patch fixed that enh_desc value is always zero. Due to calling order of stmmac_selec_desc_mode(), enh_desc value is always zero. Even though mac is set to use enhanced dma descriptor, if enh_desc is zero, functions related dma descriptor are not working correctly. Signed-off-by: Byungho An <bh74.an@samsung.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: stmmac: fixed operator typoByungho An
This patch fixed operator typo from & to ==. Due to incorrect operator, the result is incorrect. Signed-off-by: Byungho An <bh74.an@samsung.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01xen: Use more current logging stylesJoe Perches
Instead of mixing printk and pr_<level> forms, just use pr_<level> Miscellaneous changes around these conversions: Add a missing newline to avoid message interleaving, coalesce formats, reflow modified lines to 80 columns. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01net: fec: Fix multicast list setup in fec_restart().Christoph Müllner
Setup the multicast list of the net_device instead of clearing it blindly. This restores the multicast groups in case of a link down/up event or when resuming from suspend. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01ipv6: fix ecmp lookup when oif is specifiedNicolas Dichtel
There is no reason to skip ECMP lookup when oif is specified, but this implies to check oif given by user when selecting another route. When the new route does not match oif requirement, we simply keep the initial one. Spotted-by: dingzhi <zhi.ding@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01ipv6: only apply anti-spoofing checks to not-pointopoint tunnelsHannes Frederic Sowa
Because of commit 218774dc341f219bfcf940304a081b121a0e8099 ("ipv6: add anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets for 2002::/16 destinations and sources even when configured to work as a tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing checks if the device is not in pointopoint mode. This was an oversight from me in the above commit, sorry. Thanks to Roman Mamedov for reporting this! Reported-by: Roman Mamedov <rm@romanrm.ru> Cc: David Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Yet one more pull request for wireless updates intended for 3.11... For the mac80211 bits, Johannes says: "Here we have a few memory leak fixes related to BSS struct handling mostly from Ben, including a fix for a more theoretical problem (associating while a BSS struct times out) from myself, a compilation warning fix from Arend, mesh fixes from Thomas, tracking the beacon bitrate (Alex), a bandwidth change event fix (Ilan) and some initial work for 5/10 MHz channels from Simon." Regarding the iwlwifi bits, Johannes says: "Emmanuel removed some unneeded/unsupported module parameters and adds a Bluetooth 1x1 lookup-table for some upcoming products. From Alex I have an older patch to add low-power receive support, this depended on a mac80211 commit that only just came in with the merge from wireless-next I did. Ilan made beacon timings better, and Eytan added some debug statements for thermal throttling. I have a few cleanups, a fix for a long-standing but rare warning, and, arguably the most important patch here, the firmware API version bump for the 7260/3160 devices." Also included is a Bluetooth pull -- Gustavo says: "Here goes a set of patches to 3.11. The biggest work here is from Andre Guedes on the move of the Discovery to use the new request framework. Other than that Johan provided a bunch of fixes to the L2CAP code. The rest are just small fixes and clean ups." On top of all that, there are a variety of updates and fixes to brcmfmac, rt2x00, wil6210, ath9k, ath10k, and a few others here and there. This also includes a pull of the wireless tree, in order to prevent some merge conflicts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01openvswitch: Add Kconfig dependency on GRE-DEMUX.Pravin B Shelar
Openvswitch uses function from NET_IPGRE_DEMUX module. Add Kconfig dependency to fix following compilation errors: http://marc.info/?l=linux-netdev&m=137244035226634 CC: Jesse Gross <jesse@nicira.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pravin Shelar <pshelar@nicira.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix ethtool support codeJohannes Berg
A number of places treated features wrongly, listing not-supported features instead of supported ones. Also, the get_drvinfo ethtool callback isn't needed, and alx_get_pauseparam can be simplified. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01alx: fix MAC address alignment problemJohannes Berg
In two places, parts of MAC addresses are used as u32/u16 values. This can cause alignment problems, use put_unaligned and get_unaligned to fix this. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 09:15:11 +0000