summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-05-14pata_mpc52xx: reduce code size by simple change of constant data typesRoman Fietze
I've prepared a totally simple patch that, if I did it and measured it correctly, reduces the text size as of the ppc-6xx-size command of pata-mpc52xx by more than 10%, by reducing the rodata size from 0x4a4 to 0x17e bytes. This is simply done by changing the data types of the ATA timing constants. If you are interested at all, and it's worth the trouble, here the details: ppc-6xx-size: text data bss dec hex filename old: 6532 1068 0 7600 1db0 pata-mpc52xx.o new: 5718 1068 0 6786 1a82 pata-mpc52xx.o The (assembler) code itself doesn't really change very much. I double checked the final results inside mpc52xx-ata-apply-timings() and they match. The driver is still working fine of course. Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: clean up board IDsTejun Heo
ahci over time has grown a number of board IDs and it's a bit of mess right now. Clean it up such that, * board_id_* now live in a separate enum board_ids and numbers are assigned automatically. * Board IDs assigned to features are separated from the ones assigned to specific implementations and both are ordered alphabetically. * For NV MCPs, define per-generation alias board_ids and assign matching aliases in the pci id table. This makes mcp_linux, 67-73 use board_ahci_mcp65 instead of board_ahci_yesncq. Both are identical in content. * Kill now unused board_ahci_nopmp and board_ahci_yesncq. This patch doesn't cause any functional change but will make future changes to board_ids and quirks much less painful. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Turn off DMA engines when there's no device attachedMatthew Garrett
According to section 10.3.1 of the AHCI spec, PxCMD.ST must not be set unless there's a device attached. Following this saves us a measurable quantity of power and does not impair hotplug support. Based on a patch by Kristen Carlson Accardi. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Add platform driverAnton Vorontsov
This can be used for AHCI-compatible interfaces implemented inside System-On-Chip solutions, or AHCI devices connected via localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Move generic code into libahciAnton Vorontsov
This patch should contain no functional changes, just moves code around. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Introduce ahci_set_em_messages()Anton Vorontsov
Factor out some ahci_em_messages handling code from ahci_init_one(). We would like to reuse it for non-PCI devices. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Factor out PCI specifics from ahci_print_info()Anton Vorontsov
Introduce ahci_pci_print_info() that now handles PCI stuff. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Factor out PCI specifics from ahci_init_controller()Anton Vorontsov
Move PCI stuff into ahci_pci_init_controller(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Get rid of pci_dev argument in ahci_port_init()Anton Vorontsov
To make the function bus-independand we have to get rid of "struct pci_dev *", so let's pass just "struct devce *". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Factor out PCI specifics from ahci_reset_controller()Anton Vorontsov
Move PCI stuff into ahci_pci_reset_controller(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Get rid of pci_dev argument in ahci_save_initial_config()Anton Vorontsov
To make the function generic we have to get rid of "struct pci_dev *", so let's pass just a "struct devce *". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Factor out PCI specifics from ahci_save_initial_config()Anton Vorontsov
Make ahci_save_initial_config() a bit more generic by introducing force_port_map and mask_port_map arguments. Move PCI stuff into ahci_pci_save_initial_config(). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14ahci: Get rid of host->iomap usageAnton Vorontsov
Currently the driver uses host->iomap to store all the iomapped BARs of a PCI device (while AHCI devices actually use just a single memory window). We're going to teach AHCI to work with non-PCI buses, so there are two options to make this work: 1. "fake" host->iomap array for non-PCI devices, and place the needed address at iomap[AHCI_PCI_BAR]; 2. Get rid of host->iomap usage, instead introduce a private mmio field. This patch implements the second option. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-14Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds
* 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: don't leak user struct on inotify release inotify: race use after free/double free in inotify inode marks inotify: clean up the inotify_add_watch out path Inotify: undefined reference to `anon_inode_getfd' Manual merge to remove duplicate "select ANON_INODES" from Kconfig file
2010-05-14Merge branch 'davinci-fixes-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: DA830: fix USB 2.0 clock entry
2010-05-14DA830: fix USB 2.0 clock entrySergei Shtylyov
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0 clock. Arrange matching USB 2.0 clock by the clock name instead of the device. (Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case I won't have any device at all.) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-14inotify: don't leak user struct on inotify releasePavel Emelyanov
inotify_new_group() receives a get_uid-ed user_struct and saves the reference on group->inotify_data.user. The problem is that free_uid() is never called on it. Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify using fsnotify) after 2.6.30. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Eric Paris <eparis@parisplace.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Paris <eparis@redhat.com>
2010-05-14inotify: race use after free/double free in inotify inode marksEric Paris
There is a race in the inotify add/rm watch code. A task can find and remove a mark which doesn't have all of it's references. This can result in a use after free/double free situation. Task A Task B ------------ ----------- inotify_new_watch() allocate a mark (refcnt == 1) add it to the idr inotify_rm_watch() inotify_remove_from_idr() fsnotify_put_mark() refcnt hits 0, free take reference because we are on idr [at this point it is a use after free] [time goes on] refcnt may hit 0 again, double free The fix is to take the reference BEFORE the object can be found in the idr. Signed-off-by: Eric Paris <eparis@redhat.com> Cc: <stable@kernel.org>
2010-05-14inotify: clean up the inotify_add_watch out pathEric Paris
inotify_add_watch explictly frees the unused inode mark, but it can just use the generic code. Just do that. Signed-off-by: Eric Paris <eparis@redhat.com>
2010-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: vhost: fix barrier pairing
2010-05-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: mmap_min_addr check CAP_SYS_RAWIO only for write
2010-05-14Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix module loading on system with WB cache microblaze: export assembly functions used by modules microblaze: Remove powerpc code from Microblaze port microblaze: Remove compilation warnings in cache macro microblaze: export assembly functions used by modules microblaze: fix get_user/put_user side-effects microblaze: re-enable interrupts before calling schedule
2010-05-14Merge branch 'net-2.6' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-05-14mmap_min_addr check CAP_SYS_RAWIO only for writeKees Cook
Redirecting directly to lsm, here's the patch discussed on lkml: http://lkml.org/lkml/2010/4/22/219 The mmap_min_addr value is useful information for an admin to see without being root ("is my system vulnerable to kernel NULL pointer attacks?") and its setting is trivially easy for an attacker to determine by calling mmap() in PAGE_SIZE increments starting at 0, so trying to keep it private has no value. Only require CAP_SYS_RAWIO if changing the value, not reading it. Comment from Serge : Me, I like to write my passwords with light blue pen on dark blue paper, pasted on my window - if you're going to get my password, you're gonna get a headache. Signed-off-by: Kees Cook <kees.cook@canonical.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> (cherry picked from commit 822cceec7248013821d655545ea45d1c6a9d15b3)
2010-05-14microblaze: Fix module loading on system with WB cacheMichal Simek
There is necessary to flush whole dcache. Icache work should be done in kernel/module.c. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Clean up after WM83xx AUXADC interrupt if it arrives late
2010-05-13Merge branch 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Keep index within boundaries in kvmppc_44x_emul_tlbwe() KVM: VMX: blocked-by-sti must not defer NMI injections KVM: x86: Call vcpu_load and vcpu_put in cpuid_update KVM: SVM: Fix wrong intercept masks on 32 bit KVM: convert ioapic lock to spinlock
2010-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: imx.c: fix CTS trigger level lower to avoid lost chars tty: Fix unbalanced BKL handling in error path serial: mpc52xx_uart: fix null pointer dereference
2010-05-13serial: imx.c: fix CTS trigger level lower to avoid lost charsValentin Longchamp
The imx CTS trigger level is left at its reset value that is 32 chars. Since the RX FIFO has 32 entries, when CTS is raised, the FIFO already is full. However, some serial port devices first empty their TX FIFO before stopping when CTS is raised, resulting in lost chars. This patch sets the trigger level lower so that other chars arrive after CTS is raised, there is still room for 16 of them. Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch> Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch> Acked-by: Wolfram Sang<w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13tty: Fix unbalanced BKL handling in error pathAlan Cox
Arnd noted: After the "retry_open:" label, we first get the tty_mutex and then the BKL. However a the end of tty_open, we jump back to retry_open with the BKL still held. If we run into this case, the tty_open function will be left with the BKL still held. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13serial: mpc52xx_uart: fix null pointer dereferenceAnatolij Gustschin
Commit 6acc6833510db8f72b5ef343296d97480555fda9 introduced NULL pointer dereference and kernel crash on ppc32 machines while booting. Fix this bug now. Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: guard against hardlinking directories
2010-05-13vfs: Fix O_NOFOLLOW behavior for paths with trailing slashesJan Kara
According to specification mkdir d; ln -s d a; open("a/", O_NOFOLLOW | O_RDONLY) should return success but currently it returns ELOOP. This is a regression caused by path lookup cleanup patch series. Fix the code to ignore O_NOFOLLOW in case the provided path has trailing slashes. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Acked-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ice1724 - Fix ESI Maya44 capture source control ALSA: pcm - Use pgprot_noncached() for MIPS non-coherent archs ALSA: virtuoso: fix Xonar D1/DX front panel microphone ALSA: hda - Add hp-dv4 model for IDT 92HD71bx ALSA: hda - Fix mute-LED GPIO pin for HP dv series ALSA: hda: Fix 0 dB for Lenovo models using Conexant CX20549 (Venice)
2010-05-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7877 - keep dma rx buffers in seperate cache lines Input: psmouse - reset all types of mice before reconnecting Input: elantech - use all 3 bytes when checking version Input: iforce - fix Guillemot Jet Leader 3D entry Input: iforce - add Guillemot Jet Leader Force Feedback
2010-05-13mfd: Clean up after WM83xx AUXADC interrupt if it arrives lateMark Brown
In certain circumstances, especially under heavy load, the AUXADC completion interrupt may be detected after we've timed out waiting for it. That conversion would still succeed but the next conversion will see the completion that was signalled by the interrupt for the previous conversion and therefore not wait for the AUXADC conversion to run, causing it to report failure. Provide a simple, non-invasive cleanup by using try_wait_for_completion() to ensure that the completion is not signalled before we wait. Since the AUXADC is run within a mutex we know there can only have been at most one AUXADC interrupt outstanding. A more involved change should follow for the next merge window. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-13microblaze: export assembly functions used by modulesMichal Simek
Export __strncpy_user, memory_size, ioremap_bot for modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: Remove powerpc code from Microblaze portMichal Simek
Remove eeh_add_device_tree_late which is powerpc specific code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: Remove compilation warnings in cache macroMichal Simek
CC arch/microblaze/kernel/cpu/cache.o arch/microblaze/kernel/cpu/cache.c: In function '__invalidate_dcache_range_wb': arch/microblaze/kernel/cpu/cache.c:398: warning: ISO C90 forbids mixed declarations and code arch/microblaze/kernel/cpu/cache.c: In function '__flush_dcache_range_wb': arch/microblaze/kernel/cpu/cache.c:509: warning: ISO C90 forbids mixed declara Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13microblaze: export assembly functions used by modulesSteven J. Magnani
Modules that use copy_{to,from}_user(), memcpy(), and memset() fail to build in certain circumstances. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-05-13Input: ad7877 - keep dma rx buffers in seperate cache linesOskar Schirmer
With dma based spi transmission, data corruption is observed occasionally. With dma buffers located right next to msg and xfer fields, cache lines correctly flushed in preparation for dma usage may be polluted again when writing to fields in the same cache line. Make sure cache fields used with dma do not share cache lines with fields changed during dma handling. As both fields are part of a struct that is allocated via kzalloc, thus cache aligned, moving the fields to the 1st position and insert padding for alignment does the job. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Oliver Schneidewind <osw@emlix.com> Signed-off-by: Johannes Weiner <jw@emlix.com> Acked-by: Mike Frysinger <vapier@gentoo.org> [dtor@mail.ru - changed to use ___cacheline_aligned as suggested by akpm] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-13Input: psmouse - reset all types of mice before reconnectingDmitry Torokhov
Synaptics hardware requires resetting device after suspend to ram in order for the device to be operational. The reset lives in synaptics-specific reconnect handler, but it is not being invoked if synaptics support is disabled and the device is handled as a standard PS/2 device (bare or IntelliMouse protocol). Let's add reset into generic reconnect handler as well. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-13Input: elantech - use all 3 bytes when checking versionDmitry Torokhov
Apparently all 3 bytes returned by ETP_FW_VERSION_QUERY are significant and should be taken into account when matching hardware version/features. Tested-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-13microblaze: fix get_user/put_user side-effectsSteven J. Magnani
The Microblaze implementations of get_user() and (MMU) put_user() evaluate the address argument more than once. This causes unexpected side-effects for invocations that include increment operators, i.e. get_user(foo, bar++). This patch also removes the distinction between MMU and noMMU put_user(). Without the patch: $ echo 1234567890 > /proc/sys/kernel/core_pattern $ cat /proc/sys/kernel/core_pattern 12345 Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
2010-05-13microblaze: re-enable interrupts before calling scheduleSteven J. Magnani
schedule() should not be called with interrupts disabled. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-13KVM: PPC: Keep index within boundaries in kvmppc_44x_emul_tlbwe()Roel Kluin
An index of KVM44x_GUEST_TLB_SIZE is already one too large. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Hollis Blanchard <hollis@penguinppc.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13KVM: VMX: blocked-by-sti must not defer NMI injectionsJan Kiszka
As the processor may not consider GUEST_INTR_STATE_STI as a reason for blocking NMI, it could return immediately with EXIT_REASON_NMI_WINDOW when we asked for it. But as we consider this state as NMI-blocking, we can run into an endless loop. Resolve this by allowing NMI injection if just GUEST_INTR_STATE_STI is active (originally suggested by Gleb). Intel confirmed that this is safe, the processor will never complain about NMI injection in this state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> KVM-Stable-Tag Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13KVM: x86: Call vcpu_load and vcpu_put in cpuid_updateDongxiao Xu
cpuid_update may operate VMCS, so vcpu_load() and vcpu_put() should be called to ensure correctness. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13KVM: SVM: Fix wrong intercept masks on 32 bitJoerg Roedel
This patch makes KVM on 32 bit SVM working again by correcting the masks used for iret interception. With the wrong masks the upper 32 bits of the intercepts are masked out which leaves vmrun unintercepted. This is not legal on svm and the vmrun fails. Bug was introduced by commits 95ba827313 and 3cfc3092. Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 23:26:51 +0000