summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2006-09-14Input: atkbd - support Microsoft Natural Elite Pro keyboardsDmitry Torokhov
Microsoft Natural Elite Pro keyboard produces unisual response to the GET ID command - single byte 0xaa (normally keyboards produce 2-byte response). Fail GET ID command so atkbd gets a change to do alternate probe. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-14Input: i8042 - disable MUX mode on Toshiba Equium A110Dmitry Torokhov
When keyboard controller is in active multiplexing mode ALPS touchpad may get detected twice. Since the box does not have external PS/2 ports simply disabling MUX mode is safe solution. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-10Input: i8042 - get rid of polling timerDmitry Torokhov
Remove polling timer that was used to detect keybord/mice hotplug and register both IRQs right away instead of waiting for a driver to attach to a port. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-10Input: send key up events at disconnectDmitry Torokhov
Emit key up events for all pressed keys/buttons when disconnecting an input device. Cures "stuck" enter key effect when unloading keyboard module. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-10Input: constify psmouse driverHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-08Input: i8042 - add Amoi to the MUX blacklistCjacker Huang
ALPS touchpad on Amoi laptops (Amoi is a vendor in China) is not detected when keyboard controller is in MUX mode, add to blacklist. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-08Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanupHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchwin serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchright serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Penmount serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - add support for non-pressure-sensitive touchscreensShaun Jackman
- Use the touch status bit rather than the pressure bits to distinguish a BTN_TOUCH event. Non-pressure-sensitive touchscreens always report full pressure - Report ABS_PRESSURE information only if the touchscreen supports it Signed-off-by: Shaun Jackman <sjackman@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - fix checksum calculationShaun Jackman
Fix 10-byte protocol checksum calculation and do not discard packet early unless it is missing lead in byte. Signed-off-by: Shaun Jackman <sjackman@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - handle input_register_device() failuresDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-04Input: hid - #if 0 the no longer used hid_find_field_by_usage()Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: update the force feedback documentationAnssi Hannula
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: add force feedback driver for PSX-style Zeroplus devicesAnssi Hannula
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: drop remnants of the old force-feedback interfaceAnssi Hannula
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: uinput - switch to the new FF interfaceAnssi Hannula
The userspace interface of the force feedback part is changed and documentation in uinput.h is updated accordingly. MODULE_VERSION is also incremented to reflect the revision. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: use new FF interface in the HID force feedback driversAnssi Hannula
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: add force feedback driver for PID devicesAnssi Hannula
This replaces the older PID driver which was never completed. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: iforce - switch to the new FF interfaceAnssi Hannula
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: unified force feedback support for memoryless devicesAnssi Hannula
Consolidate core implementing memoryless devices in one module; added support for gain and envelopes and periodic => rumble conversion. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: implement new force feedback interfaceAnssi Hannula
Implement a new force feedback interface, in which all non-driver-specific operations are separated to a common module. This includes handling effect type validations, locking, etc. The effects are now file descriptor specific instead of the previous strange half-process half-fd specific behaviour. The effect memory of devices is not emptied if the root user opens and closes the device while another user is using effects. This is a minor change and most likely no force feedback aware programs are affected by this negatively. Otherwise the userspace interface is left unaltered. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: move fixp-arith.h to drivers/inputAnssi Hannula
Move fixp-arith.h from drivers/usb/input to drivers/input, as the part of force feedback support that requires trigonometric functions is being moved there. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: rename input.ko into input-core.koDmitry Torokhov
This will allow building input core module from several files which is needed for the reworked force feedback support. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: serio/gameport - check whether driver core calls succeededRandy Dunlap
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: spaceball - make 4000FLX Lefty workNick Martin
Although the Spaceball 4000FLX Lefty is already supported by the spaceball driver, it does not register properly due to SPACEBALL_MAX_ID being set too low. Increment SPACEBALL_MAX_ID such that the 4000FLX Lefty is properly recognized. Signed-off-by: Nick Martin <nim+linux@nimlabs.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: keyboard - simplify emulate_raw() implementationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: keyboard - remove static variable and clean up initializationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: hiddev - use standard list implementationDmitry Torokhov
Fixes Coverity #id 303 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-19Input: add missing handler->start() callDmitry Torokhov
The start() method need to be called every time we create a new handle. This includes not only registering new devices but also when registering new handlers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-15Input: HID - fix potential out-of-bound array accessDmitry Torokhov
Fixes Coverity #id 978 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-15Input: fix list iteration in input_release_device()Andrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-15Input: iforce - add Trust Force Feedback Race Master supportPrzemek Iskra
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: iforce - check array bounds before accessing elementsDmitry Torokhov
Fixes Coverity #id 864 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: libps2 - warn instead of oopsing when passed bad argumentsDmitry Torokhov
This is more user-friendly and also fixes Coverity #id 249 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: fm801-gp - fix use after freeDmitry Torokhov
Fixes Coverity #id 916 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: wistron - fix section reference mismatchesAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: introduce input_inject_event() functionDmitry Torokhov
Create input_inject_event() function which is to be used by input handlers as opposed to input_event() which is reserved for drivers implementing input devices. The difference is that if device is "grabbed" by some process input_inject_event() will ignore events unless sent from the handle that is currently owns the device. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: add start() method to input handlersDmitry Torokhov
The new start() method is called immediately after connect() and also when "grabbed" device is released by its owner. This will allow input handlers to re-synchronize state of once-grabbed device with the rest of devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: remove accept method from input_devDmitry Torokhov
This method used to enforce exclusive access to iforce devices, but presenlty there are no known users of this method. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-05[PATCH] Makefile typoAndreas Schwab
Fix a typo in the toplevel makefile. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-05[PATCH] powerpc: implement missing jiffies64_to_cputime64()David Woodhouse
asm-powerpc/cputime.h doesn't declare jiffies64_to_cputime64() or cputime64_sub(), and due to CONFIG_VIRT_CPU_ACCOUNTING it's not picking up the definition from asm-generic like x86-64 & friends do. Cc: Dave Jones <davej@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-05[PATCH] powerpc: Fix loss of interrupts with MPICBenjamin Herrenschmidt
With the new interrupt rework, an interrupt "host" map() callback can be called after the interrupt is already active. It's called again for an already mapped interrupt to allow changing the trigger setup, and currently this is not guarded with a test of wether the interrupt is requested or not. I plan to change some of this logic to be a bit less lenient against random reconfiguring of live interrupts but just not yet. The ported MPIC driver has a bug where when that happens, it will mask the interrupt. This changes it to preserve the previous masking of the interrupt instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: Move workqueue exports to where the functions are defined. [CPUFREQ] Misc cleanups in ondemand. [CPUFREQ] Make ondemand sampling per CPU and remove the mutex usage in sampling path. [CPUFREQ] Add queue_delayed_work_on() interface for workqueues. [CPUFREQ] Remove slowdown from ondemand sampling path.
2006-07-04Fix up headers_install wrt devfs removalLinus Torvalds
No devfs_fs.h header any more.. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04Merge git://git.infradead.org/hdrinstall-2.6Linus Torvalds
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
2006-07-04[PATCH] fix AB-BA deadlock inversion at cs46xx_dsp_remove_scbArjan van de Ven
There is a code sequence where the locking is substream->self_group.lock -> ins->scbs[index].lock substream->self_group.lock is interrupt safe, and taken from irq context as well (trace is snipped for brevity) so what can happen is cpu 0 cpu 1 user context user context take ins->scbs[index].lock without disabling interrupts get substream->self_group.lock (irqsafe) try to get ins->scbs[index].lock (spins) interrupt happens try to get substream->self_group.lock (spins) which is an obvious AB-BA deadlock fix is to just take the lock with _irqsafe Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04[PATCH] mthca: initialize send and receive queue locks separatelyZach Brown
mthca: initialize send and receive queue locks separately lockdep identifies a lock by the call site of its initialization. By initializing the send and receive queue locks in mthca_wq_init() we confuse lockdep. It warns that that the ordered acquiry of both locks in mthca_modify_qp() is recursive acquiry of one lock: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- modprobe/1192 is trying to acquire lock: (&wq->lock){....}, at: [<f892b4db>] mthca_modify_qp+0x60/0xa7b [ib_mthca] but task is already holding lock: (&wq->lock){....}, at: [<f892b4ce>] mthca_modify_qp+0x53/0xa7b [ib_mthca] Initializing the locks separately in mthca_alloc_qp_common() stops the warning and will let lockdep enforce proper ordering on paths that acquire both locks. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04[PATCH] Fix copying of pgdat array on each node for ia64 memory hotplugYasunori Goto
I found a bug in memory hot-add code for ia64. IA64's code has copies of pgdat's array on each node to reduce memory access over crossing node. This array is used by NODE_DATA() macro. When new node is hot-added, this pgdat's array should be updated and copied on new node too. However, I used for_each_online_node() in scatter_node_data() to copy it. This meant its array is not copied on new node. Because initialization of structures for new node was halfway, so online_node_map couldn't be set at this time. To copy arrays on new node, I changed it to check value of pgdat_list[] which is source array of copies. I tested this patch with my Memory Hotadd emulation on Tiger4. This patch is for 2.6.17-git20. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-13 07:15:50 +0000