| Age | Commit message (Collapse) | Author |
|---|
|
We should ignore the errors from the filldir callback, and just interpret
them as meaning we should exit, however we should definitely pass back
ENOMEM errors.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently, uncached_readdir() is broken because if fails to handle
the results from nfs_readdir_xdr_to_array() correctly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
nfs_do_filldir() must always free desc->page when it is done, otherwise
we end up leaking the page.
Also remove unused variable 'dentry'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Some servers are known to be buggy w.r.t. this. Deal with them...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Overflowing the buffer in the readdir ->decode_dirent() should not lead to
a fatal error, but rather to an attempt to reread the record in question.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
When an application opens a file with O_DIRECT flag, if the size of
the data that is written is equal to wsize, the client sends a
WRITE RPC with stable flag set to UNSTABLE followed by a single
COMMIT RPC rather than sending a single WRITE RPC with the stable
flag set to FILE_SYNC. This a bug.
Patch to fix this.
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
If the rpcauth_refreshcred() call returns an error other than
EACCES, ENOMEM or ETIMEDOUT, we currently end up looping forever
between call_refresh and call_refreshresult.
The correct thing to do here is to exit on all errors except
EAGAIN and ETIMEDOUT, for which case we retry 3 times, then
return EACCES.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Some aspects of PHY initialization are board dependent, things like
indicator LED connections and some clocking modes cannot be determined
by probing. The dev_flags element of struct phy_device can be used to
control these things if an appropriate value can be passed from the
Ethernet driver. We run into problems however if the PHY connections
are specified by the device tree. There is no way for the Ethernet
driver to know what flags it should pass.
If we are using the device tree, the struct phy_device will be
populated with the device tree node corresponding to the PHY, and we
can extract extra configuration information from there.
The next question is what should the format of that information be?
It is highly device specific, and the device tree representation
should not be tied to any arbitrary kernel defined constants. A
straight forward representation is just to specify the exact bits that
should be set using the "marvell,reg-init" property:
phy5: ethernet-phy@5 {
reg = <5>;
compatible = "marvell,88e1149r";
marvell,reg-init =
/* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
<3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
/* mix %:0, led[0123]:drive low off hiZ */
<3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
/* default blink periods. */
<3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
/* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
<3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
};
phy6: ethernet-phy@6 {
reg = <6>;
compatible = "marvell,88e1118";
marvell,reg-init =
/* Fix rx and tx clock transition timing */
<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
/* Adjust LED drive. */
<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
/* irq, blink-activity, blink-link */
<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
};
The Marvell PHYs have a page select register at register 22 (0x16), we
can specify any register by its page and register number. These are
the first and second word. The third word contains a mask to be ANDed
with the existing register value, and the fourth word is ORed with the
result to yield the new register value. The new marvell_of_reg_init
function leaves the page select register unchanged, so a call to it
can be dropped into the .config_init functions without unduly
affecting the state of the PHY.
If CONFIG_OF_MDIO is not set, there is no of_node, or no
"marvell,reg-init" property, the PHY initialization is unchanged.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY. The
.config_aneg function can be shared with 88E1118, but it needs its own
.config_init.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.
Suggested-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver appears to be mistaking the permission field with default value
in the case of debug and qlge_irq_type.
Driver is also passing debug as a bitmask into netif_msg_init()
which wants a number of bits. Ron Mercer suggests we should
change this to pass in -1 so the defaults get used instead,
which makes the default much less verbose.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 59365d1 commit, even being reverted by 33e0d57, showed a non robust
behavior in 'perf record': it really should just warn the user that some
functionality will not be available.
The new behavior then becomes:
[acme@felicio linux]$ ls -la /proc/{kallsyms,modules}
-r-------- 1 root root 0 Nov 22 12:19 /proc/kallsyms
-r-------- 1 root root 0 Nov 22 12:19 /proc/modules
[acme@felicio linux]$ perf record ls -R > /dev/null
Couldn't record kernel reference relocation symbol
Symbol resolution may be skewed if relocation was used (e.g. kexec).
Check /proc/kallsyms permission or run as root.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (~161 samples) ]
[acme@felicio linux]$ perf report --stdio
[kernel.kallsyms] with build id 77b05e00e64e4de1c9347d83879779b540d69f00 not found, continuing without symbols
# Events: 98 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ............... ....................
#
48.26% ls [kernel] [k] ffffffff8102b92b
22.49% ls libc-2.12.90.so [.] __strlen_sse2
8.35% ls libc-2.12.90.so [.] __GI___strcoll_l
8.17% ls ls [.] 11580
3.35% ls libc-2.12.90.so [.] _IO_new_file_xsputn
3.33% ls libc-2.12.90.so [.] _int_malloc
1.88% ls libc-2.12.90.so [.] _int_free
0.84% ls libc-2.12.90.so [.] malloc_consolidate
0.84% ls libc-2.12.90.so [.] __readdir64
0.83% ls ls [.] strlen@plt
0.83% ls libc-2.12.90.so [.] __GI_fwrite_unlocked
0.83% ls libc-2.12.90.so [.] __memcpy_sse2
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@felicio linux]$
It still has the build-ids for DSOs in the maps with hits:
[acme@felicio linux]$ perf buildid-list
77b05e00e64e4de1c9347d83879779b540d69f00 [kernel.kallsyms]
09c4a431a4a8b648fcfc2c2bdda70f56050ddff1 /bin/ls
af75ea9ad951d25e0f038901a11b3846dccb29a4 /lib64/libc-2.12.90.so
[acme@felicio linux]$
That can be used in another machine to resolve kernel symbols.
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Marcus Meissner <meissner@suse.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix ref count bug introduced by
commit 2de795707294972f6c34bae9de713e502c431296
Author: Lorenzo Colitti <lorenzo@google.com>
Date: Wed Oct 27 18:16:49 2010 +0000
ipv6: addrconf: don't remove address state on ifdown if the address
is being kept
Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr
refcnt correctly with in6_ifa_put().
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise, variable i will be -1 inside the latest iteration of the
while loop.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Change EDAC's Makefile to use <modules>-y instead of
<modules>-objs because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
[bp: Fixup commit message]
[bp: Fixup indentation]
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Looks like this is missing during multi-component conversion.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
After clk_get() mclk is checked three times instead of mout_epll
and sclk_spdif checks.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
The .stack section doesn't contain any contents, and doesn't require
initialization either. Rather than marking the output section with
'NOLOAD' but still having it exist in the object files, mark it with
%nobits which avoids the assembler marking the section with 'CONTENTS'.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
ALC887-VD is like ALC888-VD. It can not be initialized as ALC882.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the commit c0763e687d0283d0db507813ca4462aa4073c5b5
ALSA: snd-atmel-abdac: test wrong variable
the return value via PTR_ERR() had to be fixed as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BugLink: https://launchpad.net/bugs/677652
The original reporter states that, in 2.6.35, headphones do not appear
to work, nor does inserting them mute the A52J's onboard speakers. Upon
inspecting the codec dump, it appears that the newly committed hp-laptop
quirk will suffice to enable this basic functionality. Testing was done
with an alsa-driver build from 2010-11-21.
Reported-and-tested-by: Joan Creus
Cc: <stable@kernel.org> [2.6.35+]
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After clk_get() pclk is checked second time instead of sample_clk check.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
. Fix PulseAudio "ALSA driver bug" issue
(if we have two alternated areas within a 64k DMA buffer, then max
period size should obviously be 32k only).
Back references:
http://pulseaudio.org/wiki/AlsaIssues
http://fedoraproject.org/wiki/Features/GlitchFreeAudio
. In stop timer function, need to supply ACK in the timer control byte.
. Minor log output correction
When I did my first PA testing recently, the period size bug resulted
in quite precisely observeable half-period-based playback distortion.
PA-based operation is quite a bit more underrun-prone (despite its
zero-copy optimizations etc.) than raw ALSA with this rather spartan
sound hardware implementation on my puny Athlon.
Note that even with this patch, azt3328 still doesn't work for both
cases yet, PA tsched=0 and tsched
(on tsched=0 it will playback tiny fragments of periods, leading to tiny
stuttering sounds with some pauses in between, whereas with
timer-scheduled operation playback works fine - minus some quite increased
underrun trouble on PA vs. ALSA, that is).
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
BugLink: https://launchpad.net/bugs/677830
The original reporter states that the subwoofer does not mute when
inserting headphones. We need an entry for his machine's SSID in the
subwoofer pin fixup list, so add it there (verified using hda_analyzer).
Reported-and-tested-by: i-NoD
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Using %pR standardizes the struct resource output.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
controls
BugLink: https://launchpad.net/bugs/669279
The original reporter states: "The Master mixer does not change the
volume from the headphone output (which is affected by the headphone
mixer). Instead it only seems to control the on-board speaker volume.
This confuses PulseAudio greatly as the Master channel is merged into
the volume mix."
Fix this symptom by applying the hp_only quirk for the reporter's SSID.
The fix is applicable to all stable kernels.
Reported-and-tested-by: Ben Gamari <bgamari@gmail.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If we fail to find a pointer in the radix tree, don't try
to deref the NULL one we do have.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Everybody who calls btrfs_add_nondir just passes in the dentry of the new file
and then dereference dentry->d_parent->d_inode, but everybody who calls
btrfs_add_nondir() are already passed the parent's inode. So instead of
dereferencing dentry->d_parent, just make btrfs_add_nondir take the dir inode as
an argument and pass that along so we don't have to worry about d_parent.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Since we walk up the path logging all of the parts of the inode's path, we need
to hold i_mutex to make sure that the inode is not renamed while we're logging
everything. btrfs_log_dentry_safe does dget_parent and all of that jazz, but we
may get unexpected results if the rename changes the inode's location while
we're higher up the path logging those dentries, so do this for safety reasons.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
There are lots of places where we do dentry->d_parent->d_inode without holding
the dentry->d_lock. This could cause problems with rename. So instead we need
to use dget_parent() and hold the reference to the parent as long as we are
going to use it's inode and then dput it at the end.
Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: raven@themaw.net
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
When creating new inodes we don't setup inode->i_generation. So if we generate
an fh with a newly created inode we save the generation of 0, but if we flush
the inode to disk and have to read it back when getting the inode on the server
we'll have the right i_generation, so gens wont match and we get ESTALE. This
patch properly sets inode->i_generation when we create the new inode and now I'm
no longer getting ESTALE. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
People kept reporting NFS issues, specifically getting ESTALE alot. I figured
out how to reproduce the problem
SERVER
mkfs.btrfs /dev/sda1
mount /dev/sda1 /mnt/btrfs-test
<add /mnt/btrfs-test to /etc/exports>
btrfs subvol create /mnt/btrfs-test/foo
service nfs start
CLIENT
mount server:/mnt/btrfs /mnt/test
cd /mnt/test/foo
ls
SERVER
echo 3 > /proc/sys/vm/drop_caches
CLIENT
ls <-- get an ESTALE here
This is because the standard way to lookup a name in nfsd is to use readdir, and
what it does is do a readdir on the parent directory looking for the inode of
the child. So in this case the parent being / and the child being foo. Well
subvols all have the same inode number, so doing a readdir of / looking for
inode 256 will return '.', which obviously doesn't match foo. So instead we
need to have our own .get_name so that we can find the right name.
Our .get_name will either lookup the inode backref or the root backref,
whichever we're looking for, and return the name we find. Running the above
reproducer with this patch results in everything acting the way its supposed to.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Fixes these sparse warnings:
fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield
fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield
fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield
Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Symlinks and files of other types show different device numbers, though
they are on the same partition:
$ touch tmp; ln -s tmp tmp2; stat tmp tmp2
File: `tmp'
Size: 0 Blocks: 0 IO Block: 4096 regular empty file
Device: 15h/21d Inode: 984027 Links: 1
--- snip ---
File: `tmp2' -> `tmp'
Size: 3 Blocks: 0 IO Block: 4096 symbolic link
Device: 13h/19d Inode: 984028 Links: 1
Reported-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Set src_offset = 0, src_length = 20K, dest_offset = 20K. And the
original filesize of the dest file 'file2' is 30K:
# ls -l /mnt/file2
-rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2
Now clone file1 to file2, the dest file should be 40K, but it
still shows 30K:
# ls -l /mnt/file2
-rw-r--r-- 1 root root 30720 Nov 18 16:42 /mnt/file2
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
We've done the check for src_offset and src_length, and We should
also check dest_offset, otherwise we'll corrupt the destination
file:
(After cloning file1 to file2 with unaligned dest_offset)
# cat /mnt/file2
cat: /mnt/file2: Input/output error
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
When I added the clear_cache option I screwed up and took the break out of
the space_cache case statement, so whenever you mount with space_cache you also
get clear_cache, which does you no good if you say set space_cache in fstab so
it always gets set. This patch adds the break back in properly.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
'unused' calculated with wrong sign in reserve_metadata_bytes().
This might have lead to unwanted over-reservations.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs paniced when we write >64KB data by direct IO at one time.
Reproduce steps:
# mkfs.btrfs /dev/sda5 /dev/sda6
# mount /dev/sda5 /mnt
# dd if=/dev/zero of=/mnt/tmpfile bs=100K count=1 oflag=direct
Then btrfs paniced:
mapping failed logical 1103155200 bio len 69632 len 12288
------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:3010!
[SNIP]
Pid: 1992, comm: btrfs-worker-0 Not tainted 2.6.37-rc1 #1 D2399/PRIMERGY
RIP: 0010:[<ffffffffa03d1462>] [<ffffffffa03d1462>] btrfs_map_bio+0x202/0x210 [btrfs]
[SNIP]
Call Trace:
[<ffffffffa03ab3eb>] __btrfs_submit_bio_done+0x1b/0x20 [btrfs]
[<ffffffffa03a35ff>] run_one_async_done+0x9f/0xb0 [btrfs]
[<ffffffffa03d3d20>] run_ordered_completions+0x80/0xc0 [btrfs]
[<ffffffffa03d45a4>] worker_loop+0x154/0x5f0 [btrfs]
[<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs]
[<ffffffffa03d4450>] ? worker_loop+0x0/0x5f0 [btrfs]
[<ffffffff81083216>] kthread+0x96/0xa0
[<ffffffff8100cec4>] kernel_thread_helper+0x4/0x10
[<ffffffff81083180>] ? kthread+0x0/0xa0
[<ffffffff8100cec0>] ? kernel_thread_helper+0x0/0x10
We fix this problem by splitting bios when we submit bios.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
extent_bio_alloc() and compressed_bio_alloc() are similar, cleanup
similar source code.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
bio_endio() will free dip and dip->csums, so dip and dip->csums twice will
be freed twice. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
Migrate page will directly call the btrfs btree writepage function,
which isn't actually allowed.
Our writepage assumes that you have locked the extent_buffer and
flagged the block as written. Without doing these steps, we can
corrupt metadata blocks.
A later commit will remove the btree writepage function since
it is really only safely used internally by btrfs. We
use writepages for everything else.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
|
|
Commit 8b592783 added a Thumb-2 variant of usracc which, when it is
called with \rept=2, calls usraccoff once with an offset of 0 and
secondly with a hard-coded offset of 4 in order to avoid incrementing
the pointer again. If \inc != 4 then we will store the data to the wrong
offset from \ptr. Luckily, the only caller that passes \rept=2 to this
function is __clear_user so we haven't been actively corrupting user data.
This patch fixes usracc to pass \inc instead of #4 to usraccoff
when it is called a second time.
Cc: <stable@kernel.org>
Reported-by: Tony Thompson <tony.thompson@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The current implementation of sched_clock() for the Nomadik
family is based on the clock source that will wrap around without
any compensation. Currently on the Ux500 after 1030 seconds.
Utilize cnt32_to_63 to expand the sched_clock() counter to 63
bits and introduce a keepwarm() timer to assure that sched clock
and this cnt32_to_63 is called atleast once every half period.
When I print out the actual wrap-around time, and using
a year (3600*24*365 seconds) as minumum wrap limit I get an
actual wrap-around of:
sched_clock: using 55 bits @ 8333125 Hz wrap in 416 days
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET)
changed VMALLOC_END to be an explicit value. Before this, it was
relative to PAGE_OFFSET and therefore converted to unsigned long
as PAGE_OFFSET is an unsigned long. This introduced the following
build warning. Fix this by changing the explicit defines of
VMALLOC_END to be unsigned long.
CC arch/arm/mm/init.o
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int'
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Uwe Kleine-K <u.kleine-koenig@pengutronix.dee>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This change updates the ux500 specific outer cache code to use
the new *_relaxed() I/O accessors.
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
