summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-11-30exec: make argv/envp memory visible to oom-killerOleg Nesterov
Brad Spengler published a local memory-allocation DoS that evades the OOM-killer (though not the virtual memory RLIMIT): http://www.grsecurity.net/~spender/64bit_dos.c execve()->copy_strings() can allocate a lot of memory, but this is not visible to oom-killer, nobody can see the nascent bprm->mm and take it into account. With this patch get_arg_page() increments current's MM_ANONPAGES counter every time we allocate the new page for argv/envp. When do_execve() succeds or fails, we change this counter back. Technically this is not 100% correct, we can't know if the new page is swapped out and turn MM_ANONPAGES into MM_SWAPENTS, but I don't think this really matters and everything becomes correct once exec changes ->mm or fails. Reported-by: Brad Spengler <spender@grsecurity.net> Reviewed-and-discussed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30serial: mfd: adjust the baud rate settingFeng Tang
Previous baud rate setting code only has been tested with 3.5M/9600/ 115200/230400/460800 bps, and recently we got a 3M bps device to test, which needs to modify current MUL register setting, and with this patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL value scale down from 3M's. Also got some reference register setting from silicon guys for different baud rates, which tries to keep the pre-scalar register value to 16. Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30Merge branch 'for-greg' of git://gitorious.org/usb/usb into workGreg Kroah-Hartman
2010-11-30Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into work
2010-11-30cifs: fix parsing of hostname in dfs referralsJeff Layton
The DFS referral parsing code does a memchr() call to find the '\\' delimiter that separates the hostname in the referral UNC from the sharename. It then uses that value to set the length of the hostname via pointer subtraction. Instead of subtracting the start of the hostname however, it subtracts the start of the UNC, which causes the code to pass in a hostname length that is 2 bytes too long. Regression introduced in commit 1a4240f4. Reported-and-Tested-by: Robbert Kouprie <robbert@exx.nl> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Wang Lei <wang840925@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: stable@kernel.org Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30USB: fix autosuspend bug in usb-serialAlan Stern
This patch (as1437) fixes a bug in the usb-serial autosuspend handling. Since the usb-serial core now has autosuspend support, it must set the .supports_autosuspend member in every serial driver it registers. Otherwise the usb_autopm_get_interface() call won't work. This fixes Bugzilla #23012. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable@kernel.org Reported-by: Kevin Smith <thirdwiggin@gmail.com> Reported-and-tested-by: Simon Gerber <gesimu@gmail.com> Reported-and-tested-by: Matteo Croce <matteo@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: ehci: disable LPM and PPCD for nVidia MCP89 chipsBrian J. Tarricone
Tested on MacBookAir3,1. Without this, we get EPROTO errors when fetching device config descriptors. Signed-off-by: Brian Tarricone <brian@tarricone.org> Reported-by: Benoit Gschwind <gschwind@gnu-log.net> Tested-by: Edgar Hucek <gimli@dark-green.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID addedJacques Viviers
Add the PID for the Vardaan Enterprises VEUSB422R3 USB to RS422/485 converter. It uses the same chip as the FTDI_8U232AM_PID 0x6001. This should also work with the stable branches for: 2.6.31, 2.6.32, 2.6.33, 2.6.34, 2.6.35, 2.6.36 Signed-off-by: Jacques Viviers <jacques.viviers@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: yurex: add .llseek fop to file_operationsTomoki Sekiyama
Default llseek operation behavior was changed by the patch named "vfs: make no_llseek the default" after the yurex driver had been merged, so the llseek to yurex is now ignored. This patch add llseek fop with default_llseek to yurex driver to catch up to the change. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30USB: ftdi_sio: Add ID for RT Systems USB-29B radio cableMichael Stuermer
Another variant of the RT Systems programming cable for ham radios. Signed-off-by: Michael Stuermer <ms@mallorn.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-30NFS: Fix a readdirplus bugTrond Myklebust
When comparing filehandles in the helper nfs_same_file(), we should not be using 'strncmp()': filehandles are not null terminated strings. Instead, we should just use the existing helper nfs_compare_fh(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-30at91/board-yl-9200: fix typo in video supportJean-Christophe PLAGNIOL-VILLARD
for the epson frambuffer support it's CONFIG_FB_S1D13XXX not CONFIG_FB_S1D135XX Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'Jean-Christophe PLAGNIOL-VILLARD
passing argument 2 of 'dma_map_single' discards qualifiers from pointer target type Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91/picotux200: remove commenting usb device and dataflash supportJean-Christophe PLAGNIOL-VILLARD
as based on http://www.picotux.com/pt200/picotux200.pdf these board does not have such I/O Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30at91: rename rm9200ek and rm9200dk board file nameJean-Christophe PLAGNIOL-VILLARD
to be a few more concistant with the other boards as ek is for evaluation kit and dk for development kit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200ek: fix warning: 'ek_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91rm9200dk: fix warning: 'dk_mmc_data' defined but not usedJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30at91: Convert remaining boards to new-style UART initializationJean-Christophe PLAGNIOL-VILLARD
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Ajeco 1ARM Single Board Computer - Sperry-Sun KAFA board - picotux 200 Remove the deprecated at91_init_serial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Victor <linux@maxim.org.za>
2010-11-30regulator: fix kernel-doc for set_consumer_device_supplyRandy Dunlap
Fix kernel-doc warning for set_consumer_device_supply(): Warning(drivers/regulator/core.c:912): missing initial short description on line: * set_consumer_device_supply: Bind a regulator to a symbolic supply Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: enable supply regulator only when use count is zeroBengt Jonsson
Supply regulators are disabled only when the last reference count is removed on the child regulator (the use count goes from 1 to 0). This patch changes the behaviour of enable so the supply regulator is enabled only when the use count of the child regulator goes from 0 to 1. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: twl-regulator - fix twlreg_set_modeAxel Lin
The Singular Message is 16 bits: DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] Current implementation return immedially after sucessfuly write MSB part. To properly set mode, we need to write the complete message ( MSB and LSB ). In twl.h, now we have defines for PM Master module register offsets, use it instead of hard coded 0x15/0x16. Use "message & 0xff" to ensure we send correct value for LSB. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Lesly Arackal Manuel <leslyam@ti.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: lock supply in regulator enableMattias Wallin
This patch add locks around regulator supply enable. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Return proper error for regulator_register()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Ensure enough delay time for enabling regulatorAxel Lin
Integer division will truncate the result, this patch ensures we have enough delay time for enabling regulator. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Remove a redundant device_remove_file call in create_regulatorAxel Lin
We already have device_remove_file() in error path, no need to call it before goto link_name_err. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: Staticise mc13783_powermisc_rmw()Mark Brown
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30regulator: regulator disable supply fixMattias Wallin
This patch fixes a disable failure when regulator supply is used. A while loop in regulator disable checks for supply pointer != NULL but the pointer is not always updated, resulting in the while loop running too many times causing a disable failure. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-11-30ARM: 6505/1: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selectedDave Martin
Currently, the kprobes implementation for ARM only supports the ARM instruction set, so it only works if CONFIG_THUMB2_KERNEL is not enabled. Until kprobes is updated to work with Thumb-2, turning it on will cause horrible things to happen, so this patch disables it for now. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6508/1: vexpress: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6507/1: RealView: Correct data alignment in headsmp.S for ↵Dave Martin
CONFIG_THUMB2_KERNEL Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6504/1: Thumb-2: Fix long-distance conditional branches in head.S for ↵Dave Martin
Thumb-2. The 32-bit conditional branches in Thumb-2 have a shorter range (+/-512K) than their ARM counterparts (+/-32MB). The linker does not currently generate trampolines to extend the range of these Thumb-2 conditional branches, resulting in link errors when vmlinux is sufficiently large, e.g.: head.o:(.text+0x464): relocation truncated to fit: R_ARM_THM_JUMP19 This patch forces the longer-range, unconditional branch encoding by use of an explicit IT instruction. The resulting branches are triggered on the same conditions as before. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6503/1: Thumb-2: Restore sensible zImage header layout for ↵Dave Martin
CONFIG_THUMB2_KERNEL The code which makes up the zImage header intends to leave a 32-byte gap followed by a branch to the real entry point, a magic number, and a word containing the absolute entry point address. This gets messed up with with CONFIG_THUMB2_KERNEL, because the size of the initial padding NOPs changes. Instead, the header can be made fully compatible by restoring it to ARM. In the Thumb-2 case, we can replace the initial NOPs with a sequence which switches to Thumb and jumps to the real entry point. As a consequence, the zImage entry point is now always ARM, so no special magic is needed any more for the uImage rules in the Thumb-2 case. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6502/1: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.SDave Martin
Some instruction operand combinations are used here which are nor permitted in Thumb-2. In particular, most uses of pc as an operand are disallowed in Thumb-2, and deprecated in ARM from ARMv7 onwards. The modified code introduced by this patch should be compatible with all architecture versions >= v3, with or without CONFIG_THUMB2_KERNEL. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6500/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
kernel/head.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6499/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin
bootp/init.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6498/1: vfp: Correct data alignment for CONFIG_THUMB2_KERNELDave Martin
Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6497/1: kexec: Correct data alignment for CONFIG_THUMB2_KERNELDave Martin
Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30ARM: 6496/1: GIC: Do not try to register more then NR_IRQS interruptsPawel Moll
This change limits number of GIC-originating interrupts to the platform maximum (defined by NR_IRQS) while still initialising all distributor registers. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-30s6105-ipcam: fix compilationDaniel Glöckner
When the s6105-ipcam ASoC driver had been converted to the multi-component API, a single reference to a former structure element remained, blocking successful compilation. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-30s6000-pcm: fix compilationDaniel Glöckner
s6000_soc_platform has lost its forward declaration and there no longer is a name element in it, so use a string constant when calling request_irq. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-30s6000-i2s: fix compilationDaniel Glöckner
A semicolon was missing. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-30ASoC: Fix missing spin_unlock_irqrestoreAxel Lin
In nuc900_dma_hw_params(), if snd_pcm_lib_malloc_pages failed it returns without calling spin_unlock_irqrestore(). Since snd_pcm_lib_malloc_pages() does not touch struct nuc900_audio, we don't need to hold the lock while calling snd_pcm_lib_malloc_pages(). Fix it by moving spin_lock_irqsave() down to after snd_pcm_lib_malloc_pages(). In nuc900_dma_prepare(), spin_unlock_irqrestore() is missing in the error path. Fix it by removing the return in default case. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-30at91: merge all at91rm9200 defconfig in one single fileEric Benard
About all options present in each file are activated in the single file. Signed-off-by: Eric Benard <eric@eukrea.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-11-30Revert "drm/i915/dp: use VBT provided eDP params if available"Chris Wilson
This reverts commit 869184a675662bddcdf76c5b95665272facff2b8. This is required for the Sony Vaio Jesse was working on at the time, but breaks most other eDP machines - machines that were working in earlier kernels. Reported-and-tested-by: Dave Airlie <airlied@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31188 Tested-by: Zhao Jian <jian.j.zhao@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-30ALSA: Fix SNDCTL_DSP_RESET ioctl for OSS emulationTakashi Iwai
In OSS emulation, SNDCTL_DSP_RESET ioctl needs the reset of the internal buffer state in addition to drop of the running streams. Otherwise the succeeding access becomes inconsistent. Tested-by: Amit Nagal <helloin.amit@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-30cifs: display fsc in /proc/mountsSuresh Jayaraman
Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30cifs: enable fscache iff fsc mount option is used explicitlySuresh Jayaraman
Currently, if CONFIG_CIFS_FSCACHE is set, fscache is enabled on files opened as read-only irrespective of the 'fsc' mount option. Fix this by enabling fscache only if 'fsc' mount option is specified explicitly. Remove an extraneous cFYI debug message and fix a typo while at it. Reported-by: Jeff Layton <jlayton@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is setSuresh Jayaraman
Currently, it is possible to specify 'fsc' mount option even if CONFIG_CIFS_FSCACHE has not been set. The option is being ignored silently while the user fscache functionality to work. Fix this by raising error when the CONFIG option is not set. Reported-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-11-30cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4)Shirish Pargaonkar
Add extended attribute name system.cifs_acl Get/generate cifs/ntfs acl blob and hand over to the invoker however it wants to parse/process it under experimental configurable option CIFS_ACL. Do not get CIFS/NTFS ACL for xattr for attribute system.posix_acl_access Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 06:52:54 +0000