summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-02-01Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: xfs_bmap_add_extent_delay_real should init br_startblock xfs: fix dquot shaker deadlock xfs: handle CIl transaction commit failures correctly xfs: limit extsize to size of AGs and/or MAXEXTLEN xfs: prevent extsize alignment from exceeding maximum extent size xfs: limit extent length for allocation to AG size xfs: speculative delayed allocation uses rounddown_power_of_2 badly xfs: fix efi item leak on forced shutdown xfs: fix log ticket leak on forced shutdown.
2011-02-01virtio: update MAINTAINERSMichael S. Tsirkin
Patches should keep coming through Rusty but it helps if I'm Cc'd as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-01Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits) usb: gadget: composite: avoid access beyond array max length USB: serial: handle Data Carrier Detect changes USB: gadget: Fix endpoint representation in ci13xxx_udc USB: gadget: Fix error path in ci13xxx_udc gadget probe function usb: pch_udc: Fix the worning log issue at gadget driver remove USB: serial: Updated support for ICOM devices USB: ehci-mxc: add work-around for efika mx/sb bug USB: unbreak ehci-mxc on otg port of i.MX27 drivers: update to pl2303 usb-serial to support Motorola cables USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products USB serial: add missing .usb_driver field in serial drivers USB: ehci-fsl: Fix 'have_sysif_regs' detection USB: g_printer: fix bug in module parameter definitions USB: g_printer: fix bug in unregistration USB: uss720: remove duplicate USB device MAINTAINERS: add ueagle-atm entry USB: EHCI: fix DMA deallocation bug USB: pch_udc: support new device ML7213 IOH usb: pch_udc: Fixed issue which does not work with g_serial usb: set ep_dev async suspend should be later than device_initialize ...
2011-02-01Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits) staging: r8712u: Add new device IDs staging: brcm80211: fix suspend/resume issue in brcmsmac staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Staging: iio: Aditional fixpoint formatted output bugfix staging: usbip: vhci: use urb->dev->portnum to find port staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO staging: usbip: vhci: friendly log messages for connection errors staging: usbip: vhci: refuse to enqueue for dead connections staging: usbip: vhci: give back URBs from in-flight unlink requests staging: usbip: vhci: update reference count for usb_device staging: usbip: stub: update refcounts for devices and interfaces staging: tidspbridge: replace mbox callback with notifier_call staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card Staging: speakup: &&/|| confusion in silent_store() iio: Fixpoint formatted output bugfix staging: rt2860: Fix incorrect netif_stop_queue usage warning staging: r8712u: Fix memory leak in firmware loading staging: tidspbridge: configure full L1 MMU range staging: rt2870sta: Add ID for Linksys WUSB100v2 Staging: xgfib: put parenthesis in the right place ...
2011-02-01Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/serial: fix apbuart build n_hdlc: fix read and write locking serial: unbreak billionton CF card tty: use for_each_console() and WARN() on sysfs failures vt: fix issue when fbcon wants to takeover a second time. Fix up trivial conflict in drivers/tty/tty_io.c
2011-01-31[CIFS] Update cifs minor versionSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31ARM: smp_on_up: allow non-ARM SMP processorsRussell King
Allow non-ARM SMP processors to use the SMP_ON_UP feature. CPUs supporting SMP must have the new CPU ID format, so check for this first. Then check for ARM11MPCore, which fails the MPIDR check. Lastly check the MPIDR reports multiprocessing extensions and that the CPU is part of a multiprocessing system. Cc: <stable@kernel.org> Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31Btrfs: catch errors from btrfs_sync_logChris Mason
btrfs_sync_log returns -EAGAIN when we need full transaction commits instead of small log commits, but sometimes we were dropping the return value. In practice, we check for this a few different ways, but this is still a bug that can leave off full log commits when we really need them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-31Btrfs: make shrink_delalloc a little friendlierJosef Bacik
Xfstests 224 will just sit there and spin for ever until eventually we give up flushing delalloc and exit. On my box this took several hours. I could not interrupt this process either, even though we use INTERRUPTIBLE. So do 2 things 1) Keep us from looping over and over again without reclaiming anything 2) If we get interrupted exit the loop I tested this and the test now exits in a reasonable amount of time, and can be interrupted with ctrl+c. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-31Merge branch 'for_2.6.38/pm-fixes' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes
2011-01-31CAN: softing driver depends on IOMEMChuck Ebbert
Without this dependency the softing driver will be buildable on s390, where it fails. Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31net: Add default_mtu() methods to blackhole dst_opsRoland Dreier
When an IPSEC SA is still being set up, __xfrm_lookup() will return -EREMOTE and so ip_route_output_flow() will return a blackhole route. This can happen in a sndmsg call, and after d33e455337ea ("net: Abstract default MTU metric calculation behind an accessor.") this leads to a crash in ip_append_data() because the blackhole dst_ops have no default_mtu() method and so dst_mtu() calls a NULL pointer. Fix this by adding default_mtu() methods (that simply return 0, matching the old behavior) to the blackhole dst_ops. The IPv4 part of this patch fixes a crash that I saw when using an IPSEC VPN; the IPv6 part is untested because I don't have an IPv6 VPN, but it looks to be needed as well. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31OMAP: PM: SmartReflex: Fix possible null pointer read accessStefan Weil
These errors were found by cppcheck: arch/arm/mach-omap2/smartreflex.c:784: error: Possible null pointer dereference: sr_info arch/arm/mach-omap2/smartreflex.c:799: error: Possible null pointer dereference: sr_info Both conditional statements are executed when sr_info == NULL, so accessing sr_info->voltdm would fail. Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-01-31OMAP: PM: SmartReflex: Fix possible memory leakStefan Weil
sr_info was allocated and needs a kfree before returning. This error was reported by cppcheck: arch/arm/mach-omap2/smartreflex.c:837: error: Memory leak: sr_info To: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Shweta Gulati <shweta.gulati@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-01-31arm: mach-omap2: voltage: debugfs: fix memory leakAaro Koskinen
The temporary string holding the directory name to be created should be released. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-01-31dt: add documentation of ARM dt boot interfaceGrant Likely
v3: added details to Documentation/arm/Booting Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-31wl12xx: fix use after freeMathias Krause
When DEBUG_SPI is included in the debug log level wl1271_spi_reset() will dump the already freed memory instead of the SPI buffer. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31dt: Remove obsolete description of powerpc boot interfaceGrant Likely
32 and 64 bit powerpc support has been merged for a while now, but the booting-without-of.txt document still describes 32 bit as not supporting multiplatform, which is no longer true. This patch fixes the documentation. Also remove references to powerpc-specific details outside of section I in preparation to add details for other architectures. v3: cleaned up a lot more powerpc-isms and updated text to reflect current usage conventions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-31cifs: No need to check crypto blockcipher allocationShirish Pargaonkar
Missed one change as per earlier suggestion. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31[media] fix saa7111 non-detectionRussell King
One saa7111 device is reporting a different ID: saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip. As this is for sure a saa7111, change the detection code to also cover this device. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31cifs: clean up some compiler warningsJeff Layton
New compiler warnings that I noticed when building a patchset based on recent Fedora kernel: fs/cifs/cifssmb.c: In function 'CIFSSMBSetFileSize': fs/cifs/cifssmb.c:4813:8: warning: variable 'data_offset' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_open': fs/cifs/file.c:349:24: warning: variable 'pCifsInode' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_partialpagewrite': fs/cifs/file.c:1149:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function 'cifs_iovec_write': fs/cifs/file.c:1740:9: warning: passing argument 6 of 'CIFSSMBWrite2' from incompatible pointer type [enabled by default] fs/cifs/cifsproto.h:337:12: note: expected 'unsigned int *' but argument is of type 'size_t *' fs/cifs/readdir.c: In function 'cifs_readdir': fs/cifs/readdir.c:767:23: warning: variable 'cifs_sb' set but not used [-Wunused-but-set-variable] fs/cifs/cifs_dfs_ref.c: In function 'cifs_dfs_d_automount': fs/cifs/cifs_dfs_ref.c:342:2: warning: 'rc' may be used uninitialized in this function [-Wuninitialized] fs/cifs/cifs_dfs_ref.c:278:6: note: 'rc' was declared here Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31cifs: make CIFS depend on CRYPTO_MD4Jeff Layton
Recently CIFS was changed to use the kernel crypto API for MD4 hashes, but the Kconfig dependencies were not changed to reflect this. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-01-31[media] rc/streamzap: fix reporting response timesJarod Wilson
The streamzap driver has relatively low sampling resolution, and any delays in reporting events seem to cause some minor problems for the likes of irw when using the lirc bridge driver, resulting in a single keypress registering as multiple independent ones, rather than as a single press with repeats. If we call ir_raw_event_handle() more frequently and reset the rawir kfifo at end-of-signal, the behavior improves quite a bit. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] mceusb: really fix remaining keybounce issuesJarod Wilson
Make sure rawir struct is zeroed out before populating it for each ir_raw_event_store_with_filter() call, and when we see a trailing 0x80 packet (end-of-data), issue an ir_raw_event_reset() call. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc: use time unit conversion macros correctlyJarod Wilson
Due to my own stupidity, some of the wrong time unit conversion macros were being used inside some of the IR drivers I've been working on. Fix that, and convert over some additional places to also use the macros. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc/ir-lirc-codec: add back debug spewJarod Wilson
Some occasionally useful debug spew disappeared as part of a feature update a while back, and I'm finding myself in need of it again to help diagnose some issues. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] ir-kbd-i2c: improve remote behavior with z8 behind usbJarod Wilson
Add the same "are you ready?" i2c_master_send() poll command to get_key_haup_xvr found in lirc_zilog, which is apparently seen in the Windows driver for the PVR-150 w/a z8. This stabilizes what is received from both the HD-PVR and HVR-1950, even with their polling intervals at the default of 100, thus the removal of the custom 260ms polling_interval in pvrusb2-i2c-core.c. Acked-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mike Isely <isely@isely.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_sendJarod Wilson
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers respectively, have a zilog z8 chip exposed via i2c. These are both usb-connected devices, and on both of them, back-to-back i2c_master_send calls that work fine with a z8 on a pci card fail with a -EIO, as the chip isn't yet ready from the prior command. To cope with that, add a delay and retry loop where necessary. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] hdpvr: fix up i2c device registrationJarod Wilson
We have to actually call i2c_new_device() once for each of the rx and tx addresses. Also improve error-handling and device remove i2c cleanup. Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc/mce: add mappings for missing keysJarod Wilson
Per http://mediacenterguides.com/book/export/html/31 and investigation by Erin, we were missing these last three mappings to complete the mce key table. Lets remedy that. Reported-by: Erin Simonds <fisslefink@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Discard the partial framesJean-François Moine
In some cases, some frames may not end with the JPEG end of frame. Being not complete, they are now discarded. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Fix bad images with the sensor hv7131rJean-François Moine
The problem was introduced by the commit 2af0b4c60cc0daf0. Some registers were no more initialized. Tested-by: <Giovanni Scafora giovanni@archlinux.org> Tested-by: <Sergey Manucharian sm@ingeniware.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] gspca - zc3xx: Bad delay when given by a tableJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31drm/i915: Suppress spurious vblank interruptsChris Wilson
Hugh Dickins found that characters in xterm were going missing and oft delayed. Being the curious type, he managed to associate this with the new high-precision vblank patches; disabling these he found, restored the orderliness of his characters. The oddness begins when one realised that Hugh was not using vblanks at all on his system (fvwm and some xterms). Instead, all he had to go on were warning of a pipe underrun, curiously enough at around 60Hz. He poked and found that in addition to the underrun warning, the hardware was flagging the start of a new frame, a vblank, which in turn was kicking off the pending vblank processing code. There is little we can do for the underruns on Hugh's machine, a Crestline [965GM], which must have its FIFO watermarks set to 8. However, we do not need to process the vblank if we know that they are disabled... Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31drm: Avoid leak of adjusted mode along quick set_mode pathsChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31drm: Simplify and defend later checks when disabling a crtcChris Wilson
By setting the FB of a CRTC to NULL, we are turning off the CRTC (and so disable the unused encoders and connectors). As such we can simplify the later tests by making sure the set->mode is NULL. Setting the num_connectors to zero means that we do not need to loop over the unused connectors. All current usage appears correct, this only builds additional defense into the routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=27722 Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31drm: Don't switch fb when disabling an outputChris Wilson
In drm_crtc_helper_set_config, we call drm_crtc_helper_set_mode which may return early and do no operation if the crtc is to be disabled. In this case we merrily swap to the new fb, discarding the old_fb believing that it has been cleaned up. However, due to the early return, the old_fb was not presented to the backend for correct reaping, and nor was the new one - which is about to be reaped via the drm_helper_disable_unused_functions(), leading to incorrect refcounting of the pinned objects. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27722 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29230 Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31watchdog: Don't change watchdog state on read of sysctlMarcin Slusarz
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> [ add {}'s to fix a warning ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31watchdog: Fix sysctl consistencyMarcin Slusarz
If it was not possible to enable watchdog for any cpu, switch watchdog_enabled back to 0, because it's visible via kernel.watchdog sysctl. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31watchdog: Fix broken nowatchdog logicMarcin Slusarz
Passing nowatchdog to kernel disables 2 things: creation of watchdog threads AND initialization of percpu watchdog_hrtimer. As hrtimers are initialized only at boot it's not possible to enable watchdog later - for me all watchdog threads started to eat 100% of CPU time, but they could just crash. Additionally, even if these threads would start properly, watchdog_disable_all_cpus was guarded by no_watchdog check, so you couldn't disable watchdog. To fix this, remove no_watchdog variable and use already existing watchdog_enabled variable. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> [ removed another no_watchdog instance ] Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1296230433-6261-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-31Merge branch 'dmaengine-shawn' into dmaengineSascha Hauer
2011-01-31Merge branch 'dmaengine-sdma' into dmaengineSascha Hauer
2011-01-31dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()Shawn Guo
As per the reference manual, bit "L" should be set while bit "C" should be cleared for the last buffer descriptor in the non-cyclic chain, so that sdma can stop trying to find the next BD and end the transfer. In case of sdma_prep_slave_sg(), BD_LAST needs to be set and BD_CONT be cleared for the last BD. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()Shawn Guo
sdma_handle_channel_loop() is the handler of cyclic tx. One period success does not really mean the success of the tx. Instead of DMA_SUCCESS, DMA_IN_PROGRESS should be the one to tell. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()Shawn Guo
The sdmac->status was designed to reflect the status of the tx, so simply return it in sdma_tx_status(). Then dma client can call dma_async_is_tx_complete() to know the status of the tx. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of ↵Shawn Guo
sdma_prep_slave_sg() sdma_prep_dma_cyclic() sets sdmac->status to DMA_ERROR in err_out, and sdma_prep_slave_sg() needs to do the same. Otherwise, sdmac->status stays at DMA_IN_PROGRESS, which will make the function return immediately next time it gets called. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()Shawn Guo
This is a leftover from the time that the driver did not have sdma_prep_dma_cyclic callback and implemented sound dma as a looped sg chain. And it can be removed now. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX dma: initialize dma capabilities outside channel loopSascha Hauer
The capabilities are device specific fields, not channel specific fields. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX DMA: do not initialize chan_id fieldSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-31dmaengine i.MX dma: check sg entries for valid addresses and lengthsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>