summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-02-12[SCSI] target: Fix demo-mode MappedLUN shutdown UA/PR breakageNicholas Bellinger
This patch fixes a bug in core_update_device_list_for_node() where individual demo-mode generated MappedLUN's UA + Persistent Reservations metadata where being leaked, instead of falling through and calling existing core_scsi3_ua_release_all() and core_scsi3_free_pr_reg_from_nacl() at the end of core_update_device_list_for_node(). This bug would manifest itself with the following OOPs w/ TPG demo-mode endpoints (tfo->tpg_check_demo_mode()=1), and PROUT REGISTER+RESERVE -> explict struct se_session logout -> struct se_device shutdown: [ 697.021139] LIO_iblock used greatest stack depth: 2704 bytes left [ 702.235017] general protection fault: 0000 [#1] SMP [ 702.235074] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 704.372695] CPU 0 [ 704.372725] Modules linked in: crc32c target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: iscsi_target_mod] [ 704.375442] [ 704.375563] Pid: 4964, comm: tcm_node Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform [ 704.375912] RIP: 0010:[<ffffffffa00aaa16>] [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod] [ 704.376017] RSP: 0018:ffff88001e5ffcb8 EFLAGS: 00010296 [ 704.376017] RAX: 6d32335b1b0a0d0a RBX: ffff88001d952cb0 RCX: 0000000000000015 [ 704.376017] RDX: ffff88001b428000 RSI: ffff88001da5a4c0 RDI: ffff88001e5ffcd8 [ 704.376017] RBP: ffff88001e5ffd28 R08: ffff88001e5ffcd8 R09: ffff88001d952080 [ 704.377116] R10: ffff88001dfc5480 R11: ffff88001df8abb0 R12: ffff88001d952cb0 [ 704.377319] R13: 0000000000000000 R14: ffff88001df8abb0 R15: ffff88001b428000 [ 704.377521] FS: 00007f033d15c6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000 [ 704.377861] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 704.378043] CR2: 00007fff09281510 CR3: 000000001e5db000 CR4: 00000000000006f0 [ 704.378110] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 704.378110] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 704.378110] Process tcm_node (pid: 4964, threadinfo ffff88001e5fe000, task ffff88001d99c260) [ 704.378110] Stack: [ 704.378110] ffffea0000678980 ffff88001da5a4c0 ffffea0000678980 ffff88001f402b00 [ 704.378110] ffff88001e5ffd08 ffffffff810ea236 ffff88001e5ffd18 0000000000000282 [ 704.379772] ffff88001d952080 ffff88001d952cb0 ffff88001d952cb0 ffff88001dc79010 [ 704.380082] Call Trace: [ 704.380220] [<ffffffff810ea236>] ? __slab_free+0x89/0x11c [ 704.380403] [<ffffffffa00ab781>] core_scsi3_free_all_registrations+0x3e/0x157 [target_core_mod] [ 704.380479] [<ffffffffa00a752b>] se_release_device_for_hba+0xa6/0xd8 [target_core_mod] [ 704.380479] [<ffffffffa00a7598>] se_free_virtual_device+0x3b/0x45 [target_core_mod] [ 704.383750] [<ffffffffa00a3177>] target_core_drop_subdev+0x13a/0x18d [target_core_mod] [ 704.384068] [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs] [ 704.384263] [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs] [ 704.384459] [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3 [ 704.384631] [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4 [ 704.384895] [<ffffffff810eed15>] ? filp_close+0x67/0x72 [ 704.386485] [<ffffffff810fc446>] sys_rmdir+0x11/0x13 [ 704.387893] [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b [ 704.388083] Code: 4c 8d 45 b0 41 56 49 89 d7 41 55 41 89 cd 41 54 b9 15 00 00 00 53 48 89 fb 48 83 ec 48 4c 89 c7 48 89 75 98 48 8b 86 28 01 00 00 <48> 8b 80 90 01 00 00 48 89 45 a0 31 c0 f3 aa c7 45 ac 00 00 00 [ 704.388763] RIP [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod] [ 704.389142] RSP <ffff88001e5ffcb8> [ 704.389572] ---[ end trace 2a3614f3cd6261a5 ]--- Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] target/iblock: Fix failed bd claim NULL pointer dereferenceNicholas Bellinger
This patch adds an explict check for struct iblock_dev->ibd_bd in iblock_free_device() before calling blkdev_put(), which will otherwise hit the following NULL pointer dereference @ ib_dev->ibd_bd when iblock_create_virtdevice() fails to claim an already in-use struct block_device via blkdev_get_by_path(). [ 112.528578] Target_Core_ConfigFS: Allocated struct se_subsystem_dev: ffff88001e750000 se_dev_su_ptr: ffff88001dd05d70 [ 112.534681] Target_Core_ConfigFS: Calling t->free_device() for se_dev_su_ptr: ffff88001dd05d70 [ 112.535029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 112.535029] IP: [<ffffffff814987a3>] mutex_lock+0x14/0x35 [ 112.535029] PGD 1e5d0067 PUD 1e274067 PMD 0 [ 112.535029] Oops: 0002 [#1] SMP [ 112.535029] last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host2/target2:0:0/2:0:0:0/type [ 112.535029] CPU 0 [ 112.535029] Modules linked in: iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: scsi_wait_scan] [ 112.535029] [ 112.535029] Pid: 3345, comm: python2.5 Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform [ 112.535029] RIP: 0010:[<ffffffff814987a3>] [<ffffffff814987a3>] mutex_lock+0x14/0x35 [ 112.535029] RSP: 0018:ffff88001e6d7d58 EFLAGS: 00010246 [ 112.535029] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000082 [ 112.535029] RDX: ffff88001e6d7fd8 RSI: 0000000000000083 RDI: 0000000000000020 [ 112.535029] RBP: ffff88001e6d7d68 R08: 0000000000000000 R09: 0000000000000000 [ 112.535029] R10: ffff8800000be860 R11: ffff88001f420000 R12: 0000000000000020 [ 112.535029] R13: 0000000000000083 R14: ffff88001d809430 R15: ffff88001d8094f8 [ 112.535029] FS: 00007ff17ca7d6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000 [ 112.535029] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.535029] CR2: 0000000000000020 CR3: 000000001e5d2000 CR4: 00000000000006f0 [ 112.535029] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 112.535029] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 112.535029] Process python2.5 (pid: 3345, threadinfo ffff88001e6d6000, task ffff88001e2d0760) [ 112.535029] Stack: [ 112.535029] ffff88001e6d7d88 0000000000000000 ffff88001e6d7d98 ffffffff811187fc [ 112.535029] ffff88001d809430 ffff88001dd05d70 ffff88001e750860 ffff88001e750000 [ 112.535029] ffff88001e6d7db8 ffffffffa00e3757 ffff88001e6d7db8 0000000000000004 [ 112.535029] Call Trace: [ 112.535029] [<ffffffff811187fc>] blkdev_put+0x28/0x107 [ 112.535029] [<ffffffffa00e3757>] iblock_free_device+0x1d/0x36 [target_core_iblock] [ 112.535029] [<ffffffffa00a319c>] target_core_drop_subdev+0x15f/0x18d [target_core_mod] [ 112.535029] [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs] [ 112.535029] [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs] [ 112.535029] [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3 [ 112.535029] [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4 [ 112.535029] [<ffffffff810fc446>] sys_rmdir+0x11/0x13 [ 112.535029] [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b [ 112.535029] Code: 8b 04 25 88 b5 00 00 48 2d d8 1f 00 00 48 89 43 18 31 c0 5e 5b c9 c3 55 48 89 e5 53 48 89 fb 48 83 ec 08 e8 c4 f7 ff ff 48 89 df <3e> ff 0f 79 05 e8 1e ff ff ff 65 48 8b 04 25 88 b5 00 00 48 2d [ 112.535029] RIP [<ffffffff814987a3>] mutex_lock+0x14/0x35 [ 112.535029] RSP <ffff88001e6d7d58> [ 112.535029] CR2: 0000000000000020 [ 132.679636] ---[ end trace 05754bb48eb828f0 ]--- Note it also adds an second explict check for ib_dev->ibd_bio_set before calling bioset_free() to fix the same possible NULL pointer deference during an early iblock_create_virtdevice() failure. Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] target: iblock/pscsi claim checking for NULL instead of IS_ERRDan Carpenter
blkdev_get_by_path() returns an ERR_PTR() or error and it doesn't return a NULL. It looks like this bug would be easy to trigger by mistake. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory ↵Darrick J. Wong
corruption If I create a scsi_debug device that is larger than 4GB, the multiplication of (block * scsi_debug_sector_size) can produce a 64-bit value. Unfortunately, the compiler sees two 32-bit quantities and performs a 32-bit multiplication, thus truncating the bits above 2^32. This causes the wrong memory location to be read or written. Change block and rest to be unsigned long long. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: call __jbd2_log_start_commit with j_state_lock write locked ext4: serialize unaligned asynchronous DIO ext4: make grpinfo slab cache names static ext4: Fix data corruption with multi-block writepages support ext4: fix up ext4 error handling ext4: unregister features interface on module unload ext4: fix panic on module unload when stopping lazyinit thread
2011-02-12[SCSI] qla2xxx: Change from irq to irqsave with host_lockMadhuranath Iyengar
Make the driver safer by using irqsave/irqrestore with host_lock. Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12[SCSI] qla2xxx: Fix race that could hang kthread_stop()James Bottomley
There is a small race window in qla2x00_do_dpc() between checking for kthread_should_stop() and going to sleep after setting TASK_INTERRUPTIBLE. If qla2x00_free_device() is called in this window, kthread_stop will wait forever because there will be no one to wake up the process. Fix by making sure we only set TASK_INTERRUPTIBLE before checking kthread_stop(). Reported-by: Bandan Das <bandan.das@stratus.com> Acked-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12jbd2: call __jbd2_log_start_commit with j_state_lock write lockedTheodore Ts'o
On an SMP ARM system running ext4, I've received a report that the first J_ASSERT in jbd2_journal_commit_transaction has been triggering: J_ASSERT(journal->j_running_transaction != NULL); While investigating possible causes for this problem, I noticed that __jbd2_log_start_commit() is getting called with j_state_lock only read-locked, in spite of the fact that it's possible for it might j_commit_request. Fix this by grabbing the necessary information so we can test to see if we need to start a new transaction before dropping the read lock, and then calling jbd2_log_start_commit() which will grab the write lock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12ext4: serialize unaligned asynchronous DIOEric Sandeen
ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12ext4: make grpinfo slab cache names staticEric Sandeen
In 2.6.37 I was running into oopses with repeated module loads & unloads. I tracked this down to: fb1813f4 ext4: use dedicated slab caches for group_info structures (this was in addition to the features advert unload problem) The kstrdup & subsequent kfree of the cache name was causing a double free. In slub, at least, if I read it right it allocates & frees the name itself, slab seems to do something different... so in slub I think we were leaking -our- cachep->name, and double freeing the one allocated by slub. After getting lost in slab/slub/slob a bit, I just looked at other sized-caches that get allocated. jbd2, biovec, sgpool all do it more or less the way jbd2 does. Below patch follows the jbd2 method of dynamically allocating a cache at mount time from a list of static names. (This might also possibly fix a race creating the caches with parallel mounts running). [Folded in a fix from Dan Carpenter which fixed an off-by-one error in the original patch] Cc: stable@kernel.org Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12timer debug: Hide kernel addresses via %pK in /proc/timer_listKees Cook
In the continuing effort to avoid kernel addresses leaking to unprivileged users, this patch switches to %pK for /proc/timer_list reporting. Signed-off-by: Kees Cook <kees.cook@canonical.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dan Rosenberg <drosenberg@vsecurity.com> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20110212032125.GA23571@outflux.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-12x86: Readd missing irq_to_desc() in fixup_irq()Thomas Gleixner
commit a3c08e5d(x86: Convert irq_chip access to new functions) accidentally zapped desc = irq_to_desc(irq); in the vector loop. So we lock some random irq descriptor. Add it back. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> # .37
2011-02-12bridge: Replace mp->mglist hlist with a boolHerbert Xu
As it turns out we never need to walk through the list of multicast groups subscribed by the bridge interface itself (the only time we'd want to do that is when we shut down the bridge, in which case we simply walk through all multicast groups), we don't really need to keep an hlist for mp->mglist. This means that we can replace it with just a single bit to indicate whether the bridge interface is subscribed to a group. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12MAINTAINERS: Add entry for GPIO subsystemGrant Likely
I'll probably regret this.... Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-11bridge: Fix timer typo that may render snooping less effectiveHerbert Xu
In a couple of spots where we are supposed to modify the port group timer (p->timer) we instead modify the bridge interface group timer (mp->timer). The effect of this is mostly harmless. However, it can cause port subscriptions to be longer than they should be, thus making snooping less effective. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11bridge: Fix mglist corruption that leads to memory corruptionHerbert Xu
The list mp->mglist is used to indicate whether a multicast group is active on the bridge interface itself as opposed to one of the constituent interfaces in the bridge. Unfortunately the operation that adds the mp->mglist node to the list neglected to check whether it has already been added. This leads to list corruption in the form of nodes pointing to itself. Normally this would be quite obvious as it would cause an infinite loop when walking the list. However, as this list is never actually walked (which means that we don't really need it, I'll get rid of it in a subsequent patch), this instead is hidden until we perform a delete operation on the affected nodes. As the same node may now be pointed to by more than one node, the delete operations can then cause modification of freed memory. This was observed in practice to cause corruption in 512-byte slabs, most commonly leading to crashes in jbd2. Thanks to Josef Bacik for pointing me in the right direction. Reported-by: Ian Page Hands <ihands@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12x86: Fix text_poke_smp_batch() deadlockPeter Zijlstra
Fix this deadlock - we are already holding the mutex: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc4-test+ #1 ------------------------------------------------------- bash/1850 is trying to acquire lock: (text_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f but task is already holding lock: (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (smp_alt){+.+...}: [<ffffffff81082d02>] lock_acquire+0xcd/0xf8 [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff8101050f>] alternatives_smp_switch+0x77/0x1d8 [<ffffffff81926a6f>] do_boot_cpu+0xd7/0x762 [<ffffffff819277dd>] native_cpu_up+0xe6/0x16a [<ffffffff81928e28>] _cpu_up+0x9d/0xee [<ffffffff81928f4c>] cpu_up+0xd3/0xe7 [<ffffffff82268d4b>] kernel_init+0xe8/0x20a [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10 -> #1 (cpu_hotplug.lock){+.+.+.}: [<ffffffff81082d02>] lock_acquire+0xcd/0xf8 [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff810568cc>] get_online_cpus+0x41/0x55 [<ffffffff810a1348>] stop_machine+0x1e/0x3e [<ffffffff819314c1>] text_poke_smp_batch+0x3a/0x3c [<ffffffff81932b6c>] arch_optimize_kprobes+0x10d/0x11c [<ffffffff81933a51>] kprobe_optimizer+0x152/0x222 [<ffffffff8106bb71>] process_one_work+0x1d3/0x335 [<ffffffff8106cfae>] worker_thread+0x104/0x1a4 [<ffffffff810707c4>] kthread+0x9d/0xa5 [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10 -> #0 (text_mutex){+.+.+.}: other info that might help us debug this: 6 locks held by bash/1850: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #1: (s_active#75){.+.+.+}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #2: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #3: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #4: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f #5: (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f stack backtrace: Pid: 1850, comm: bash Not tainted 2.6.38-rc4-test+ #1 Call Trace: [<ffffffff81080eb2>] print_circular_bug+0xa8/0xb7 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43 [<ffffffff81010302>] alternatives_smp_unlock+0x3d/0x93 [<ffffffff81010630>] alternatives_smp_switch+0x198/0x1d8 [<ffffffff8102568a>] native_cpu_die+0x65/0x95 [<ffffffff818cc4ec>] _cpu_down+0x13e/0x202 [<ffffffff8117a619>] sysfs_write_file+0x108/0x144 [<ffffffff8111f5a2>] vfs_write+0xac/0xff [<ffffffff8111f7a9>] sys_write+0x4a/0x6e Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: mathieu.desnoyers@efficios.com Cc: rusty@rustcorp.com.au Cc: ananth@in.ibm.com Cc: masami.hiramatsu.pt@hitachi.com Cc: fweisbec@gmail.com Cc: jbeulich@novell.com Cc: jbaron@redhat.com Cc: mhiramat@redhat.com LKML-Reference: <1297458466.5226.93.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-12ACPI / Video: Probe for output switch method when searching video devices.Michael Karcher
This patch reverts one hunk of 677bd810eedce61edf15452491781ff046b92edc "ACPI video: remove output switching control", namely the removal of probing for _DOS/_DOD when searching for video devices. This is needed on some Fujitsu Laptops (at least S7110, P8010) for the ACPI backlight interface to work, as an these machines, neither ROM nor posting methods are available, and after removal of output switching, none of the caps triggers, which prevents the backlight search from being entered. Tested on a Fujitsu Lifebook S7110 and Fujitsu Lifebook P8010. This probably fixes https://bugzilla.kernel.org/show_bug.cgi?id=27312 for the people who have no entry in /sys/class/backlight. This is the complete list of public (starting with "_") methods implemented on the S7110, BIOS rev 1.34: \_SB_.PCI0.GFX0._ADR \_SB_.PCI0.GFX0._DOS \_SB_.PCI0.GFX0._DOD \_SB_.PCI0.GFX0.CRT._ADR \_SB_.PCI0.GFX0.CRT._DCS \_SB_.PCI0.GFX0.CRT._DGS \_SB_.PCI0.GFX0.CRT._DSS \_SB_.PCI0.GFX0.LCD._ADR \_SB_.PCI0.GFX0.LCD._BCL \_SB_.PCI0.GFX0.LCD._BCM \_SB_.PCI0.GFX0.LCD._BQC \_SB_.PCI0.GFX0.LCD._DCS \_SB_.PCI0.GFX0.LCD._DGS \_SB_.PCI0.GFX0.LCD._DSS \_SB_.PCI0.GFX0.LCD._PS0 \_SB_.PCI0.GFX0.LCD._PS3 \_SB_.PCI0.GFX0.TV._ADR \_SB_.PCI0.GFX0.TV._DCS \_SB_.PCI0.GFX0.TV._DGS \_SB_.PCI0.GFX0.TV._DSS \_SB_.PCI0.GFX0.DVI._ADR \_SB_.PCI0.GFX0.DVI._DCS \_SB_.PCI0.GFX0.DVI._DGS \_SB_.PCI0.GFX0.DVI._DSS Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-12ACPI / Wakeup: Enable button GPEs unconditionally during initializationRafael J. Wysocki
Commit 9630bdd (ACPI: Use GPE reference counting to support shared GPEs) introduced a suspend regression where boxes resume immediately after being suspended due to the lid or sleep button wakeup status not being cleared properly. This happens if the GPEs corresponding to those devices are not enabled all the time, which apparently is expected by some BIOSes. To fix this problem, enable button and lid GPEs unconditionally during initialization and keep them enabled all the time, regardless of whether or not the ACPI button driver is used. References: https://bugzilla.kernel.org/show_bug.cgi?id=27372 Reported-and-tested-by: Ferenc Wágner <wferi@niif.hu> Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-12ACPI / ACPICA: Avoid crashing if _PRW is defined for the root objectRafael J. Wysocki
Some ACPI BIOSes define _PRW for the root object which causes acpi_setup_gpe_for_wake() to crash when trying to dereference the bogus device_node pointer. Avoid the crash by checking if wake_device is not the root object before attempting to set up the "implicit notify" mechanism for it. The problem was introduced by commit bba63a296ffab20e08d9e8252d2f0d99 (ACPICA: Implicit notify support) that added the wake_device argument to acpi_setup_gpe_for_wake(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-11Merge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index
2011-02-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix DIMMs per DCTs output
2011-02-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: use single thread workqueues
2011-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: don't always drop malformed replies on the floor (try #3) cifs: clean up checks in cifs_echo_request [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate
2011-02-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (emc1403) Fix I2C address range hwmon: (lm63) Consider LM64 temperature offset
2011-02-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read security: add cred argument to security_capable() tpm_tis: Use timeouts returned from TPM
2011-02-11Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h ARM: S5PV310: Cleanup System MMU ARM: S5PV310: Add support System MMU on SMDKV310
2011-02-11Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix msr instruction detection microblaze: Fix pte_update function microblaze: Fix asm compilation warning microblaze: Fix IRQ flag handling for MSR=0
2011-02-11drivers/w1/masters/omap_hdq.c: add missing clk_putJulia Lawall
This code makes two calls to clk_get, then test both return values and fails if either failed. The problem is that in the first inner if, where the first call to clk_get has failed, it don't know if the second call has failed as well. So it don't know whether clk_get should be called on the result of the second call. Of course, it would be possible to test that value again. A simpler solution is just to test the result of calling clk_get directly after each call. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ position p1,p2; expression e; statement S; @@ e = clk_get@p1(...) ... if@p2 (IS_ERR(e)) S @@ expression e; statement S; identifier l; position r.p1, p2 != r.p2; @@ *e = clk_get@p1(...) ... when != clk_put(e) *if@p2 (...) { ... when != clk_put(e) * return ...; }// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11memcg: fix leak of accounting at failure path of hugepage collapsingKAMEZAWA Hiroyuki
mem_cgroup_uncharge_page() should be called in all failure cases after mem_cgroup_charge_newpage() is called in huge_memory.c::collapse_huge_page() [ 4209.076861] BUG: Bad page state in process khugepaged pfn:1e9800 [ 4209.077601] page:ffffea0006b14000 count:0 mapcount:0 mapping: (null) index:0x2800 [ 4209.078674] page flags: 0x40000000004000(head) [ 4209.079294] pc:ffff880214a30000 pc->flags:2146246697418756 pc->mem_cgroup:ffffc9000177a000 [ 4209.082177] (/A) [ 4209.082500] Pid: 31, comm: khugepaged Not tainted 2.6.38-rc3-mm1 #1 [ 4209.083412] Call Trace: [ 4209.083678] [<ffffffff810f4454>] ? bad_page+0xe4/0x140 [ 4209.084240] [<ffffffff810f53e6>] ? free_pages_prepare+0xd6/0x120 [ 4209.084837] [<ffffffff8155621d>] ? rwsem_down_failed_common+0xbd/0x150 [ 4209.085509] [<ffffffff810f5462>] ? __free_pages_ok+0x32/0xe0 [ 4209.086110] [<ffffffff810f552b>] ? free_compound_page+0x1b/0x20 [ 4209.086699] [<ffffffff810fad6c>] ? __put_compound_page+0x1c/0x30 [ 4209.087333] [<ffffffff810fae1d>] ? put_compound_page+0x4d/0x200 [ 4209.087935] [<ffffffff810fb015>] ? put_page+0x45/0x50 [ 4209.097361] [<ffffffff8113f779>] ? khugepaged+0x9e9/0x1430 [ 4209.098364] [<ffffffff8107c870>] ? autoremove_wake_function+0x0/0x40 [ 4209.099121] [<ffffffff8113ed90>] ? khugepaged+0x0/0x1430 [ 4209.099780] [<ffffffff8107c236>] ? kthread+0x96/0xa0 [ 4209.100452] [<ffffffff8100dda4>] ? kernel_thread_helper+0x4/0x10 [ 4209.101214] [<ffffffff8107c1a0>] ? kthread+0x0/0xa0 [ 4209.101842] [<ffffffff8100dda0>] ? kernel_thread_helper+0x0/0x10 Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11vmscan: fix zone shrinking exit when scan work is doneJohannes Weiner
Commit 3e7d34497067 ("mm: vmscan: reclaim order-0 and use compaction instead of lumpy reclaim") introduced an indefinite loop in shrink_zone(). It meant to break out of this loop when no pages had been reclaimed and not a single page was even scanned. The way it would detect the latter is by taking a snapshot of sc->nr_scanned at the beginning of the function and comparing it against the new sc->nr_scanned after the scan loop. But it would re-iterate without updating that snapshot, looping forever if sc->nr_scanned changed at least once since shrink_zone() was invoked. This is not the sole condition that would exit that loop, but it requires other processes to change the zone state, as the reclaimer that is stuck obviously can not anymore. This is only happening for higher-order allocations, where reclaim is run back to back with compaction. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Michal Hocko <mhocko@suse.cz> Tested-by: Kent Overstreet<kent.overstreet@gmail.com> Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11mlock: do not munlock pages in __do_fault()Michel Lespinasse
If the page is going to be written to, __do_page needs to break COW. However, the old page (before breaking COW) was never mapped mapped into the current pte (__do_fault is only called when the pte is not present), so vmscan can't have marked the old page as PageMlocked due to being mapped in __do_fault's VMA. Therefore, __do_fault() does not need to worry about clearing PageMlocked() on the old page. Signed-off-by: Michel Lespinasse <walken@google.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11mlock: fix race when munlocking pages in do_wp_page()Michel Lespinasse
vmscan can lazily find pages that are mapped within VM_LOCKED vmas, and set the PageMlocked bit on these pages, transfering them onto the unevictable list. When do_wp_page() breaks COW within a VM_LOCKED vma, it may need to clear PageMlocked on the old page and set it on the new page instead. This change fixes an issue where do_wp_page() was clearing PageMlocked on the old page while the pte was still pointing to it (as well as rmap). Therefore, we were not protected against vmscan immediately transfering the old page back onto the unevictable list. This could cause pages to get stranded there forever. I propose to move the corresponding code to the end of do_wp_page(), after the pte (and rmap) have been pointed to the new page. Additionally, we can use munlock_vma_page() instead of clear_page_mlock(), so that the old page stays mlocked if there are still other VM_LOCKED vmas mapping it. Signed-off-by: Michel Lespinasse <walken@google.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11memblock: don't adjust size in memblock_find_base()Yinghai Lu
While applying patch to use memblock to find aperture for 64bit x86. Ingo found system with 1g + force_iommu > No AGP bridge found > Node 0: aperture @ 38000000 size 32 MB > Aperture pointing to e820 RAM. Ignoring. > Your BIOS doesn't leave a aperture memory hole > Please enable the IOMMU option in the BIOS setup > This costs you 64 MB of RAM > Cannot allocate aperture memory hole (0,65536K) the corresponding code: addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20); if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%lx,%uK)\n", addr, aper_size>>10); return 0; } memblock_x86_reserve_range(addr, addr + aper_size, "aperture64") fails because memblock core code align the size with 512M. That could make size way too big. So don't align the size in that case. actually __memblock_alloc_base, the another caller already align that before calling that function. BTW. x86 does not use __memblock_alloc_base... Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11nbd: remove module-level ioctl mutexSoren Hansen
Commit 2a48fc0ab242417 ("block: autoconvert trivial BKL users to private mutex") replaced uses of the BKL in the nbd driver with mutex operations. Since then, I've been been seeing these lock ups: INFO: task qemu-nbd:16115 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. qemu-nbd D 0000000000000001 0 16115 16114 0x00000004 ffff88007d775d98 0000000000000082 ffff88007d775fd8 ffff88007d774000 0000000000013a80 ffff8800020347e0 ffff88007d775fd8 0000000000013a80 ffff880133730000 ffff880002034440 ffffea0004333db8 ffffffffa071c020 Call Trace: [<ffffffff815b9997>] __mutex_lock_slowpath+0xf7/0x180 [<ffffffff815b93eb>] mutex_lock+0x2b/0x50 [<ffffffffa071a21c>] nbd_ioctl+0x6c/0x1c0 [nbd] [<ffffffff812cb970>] blkdev_ioctl+0x230/0x730 [<ffffffff811967a1>] block_ioctl+0x41/0x50 [<ffffffff81175c03>] do_vfs_ioctl+0x93/0x370 [<ffffffff81175f61>] sys_ioctl+0x81/0xa0 [<ffffffff8100c0c2>] system_call_fastpath+0x16/0x1b Instrumenting the nbd module's ioctl handler with some extra logging clearly shows the NBD_DO_IT ioctl being invoked which is a long-lived ioctl in the sense that it doesn't return until another ioctl asks the driver to disconnect. However, that other ioctl blocks, waiting for the module-level mutex that replaced the BKL, and then we're stuck. This patch removes the module-level mutex altogether. It's clearly wrong, and as far as I can see, it's entirely unnecessary, since the nbd driver maintains per-device mutexes, and I don't see anything that would require a module-level (or kernel-level, for that matter) mutex. Signed-off-by: Soren Hansen <soren@linux2go.dk> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Paul Clements <paul.clements@steeleye.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11drivers/rtc/rtc-proc.c: add module_put on error path in rtc_proc_open()Alexander Strakh
In file drivers/rtc/rtc-proc.c seq_open() can return -ENOMEM. 86 if (!try_module_get(THIS_MODULE)) 87 return -ENODEV; 88 89 return single_open(file, rtc_proc_show, rtc); In this case before exiting (line 89) from rtc_proc_open the module_put(THIS_MODULE) must be called. Found by Linux Device Drivers Verification Project Signed-off-by: Alexander Strakh <strakh@ispras.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11drivers/gpio/pca953x.c: add a mutex to fix race conditionRoland Stigge
Add a mutex to register communication and handling. Without the mutex, GPIOs didn't switch as expected when toggled in a fast sequence of status changes of multiple outputs. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Marc Zyngier <maz@misterjones.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11ptrace: use safer wake up on ptrace_detach()Tejun Heo
The wake_up_process() call in ptrace_detach() is spurious and not interlocked with the tracee state. IOW, the tracee could be running or sleeping in any place in the kernel by the time wake_up_process() is called. This can lead to the tracee waking up unexpectedly which can be dangerous. The wake_up is spurious and should be removed but for now reduce its toxicity by only waking up if the tracee is in TRACED or STOPPED state. This bug can possibly be used as an attack vector. I don't think it will take too much effort to come up with an attack which triggers oops somewhere. Most sleeps are wrapped in condition test loops and should be safe but we have quite a number of places where sleep and wakeup conditions are expected to be interlocked. Although the window of opportunity is tiny, ptrace can be used by non-privileged users and with some loading the window can definitely be extended and exploited. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11vfs: call rcu_barrier after ->kill_sb()Boaz Harrosh
In commit fa0d7e3de6d6 ("fs: icache RCU free inodes"), we use rcu free inode instead of freeing the inode directly. It causes a crash when we rmmod immediately after we umount the volume[1]. So we need to call rcu_barrier after we kill_sb so that the inode is freed before we do rmmod. The idea is inspired by Aneesh Kumar. rcu_barrier will wait for all callbacks to end before preceding. The original patch was done by Tao Ma, but synchronize_rcu() is not enough here. 1. http://marc.info/?l=linux-fsdevel&m=129680863330185&w=2 Tested-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11Fix possible filp_cachep memory corruptionLinus Torvalds
In commit 31e6b01f4183 ("fs: rcu-walk for path lookup") we started doing path lookup using RCU, which then falls back to a careful non-RCU lookup in case of problems (LOOKUP_REVAL). So do_filp_open() has this "re-do the lookup carefully" looping case. However, that means that we must not release the open-intent file data if we are going to loop around and use it once more! Fix this by moving the release of the open-intent data to the function that allocates it (do_filp_open() itself) rather than the helper functions that can get called multiple times (finish_open() and do_last()). This makes the logic for the lifetime of that field much more obvious, and avoids the possible double free. Reported-by: J. R. Okajima <hooanon05@yahoo.co.jp> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-02-11ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported ↵Will Deacon
arch The ptrace debug information register was advertising breakpoint and watchpoint resources for unsupported debug architectures. This meant that setting breakpoints on these architectures would appear to succeed, although they would never fire in reality. This patch fixes the breakpoint slot probing so that it returns 0 when running on an unsupported debug architecture. Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCRWill Deacon
Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock is set leads to UNPREDICTABLE behaviour. This patch ensures that we clear the OS lock before accessing anything other than the DBGDIDR, thereby avoiding this behaviour. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6658/1: collie: do actually pass locomo_info to locomo driverDmitry Eremin-Solenikov
locomo_info isn't actually used as a platform_data on collie platform: arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNELDave Martin
rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL. OABI userland is useless without FPA support." nwfpe doesn't work with Thumb-2 anyway and will probably never get ported, so I can't argue with that. This patch implements the dependency change. Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11dlm: use single thread workqueuesDavid Teigland
The recent commit to use cmwq for send and recv threads dcce240ead802d42b1e45ad2fcb2ed4a399cb255 introduced problems, apparently due to multiple workqueue threads. Single threads make the problems go away, so return to that until we fully understand the concurrency issues with multiple threads. Signed-off-by: David Teigland <teigland@redhat.com>
2011-02-11ip_gre: Add IPPROTO_GRE to flowi in ipgre_tunnel_xmitSteffen Klassert
Commit 5811662b15db018c740c57d037523683fd3e6123 ("net: use the macros defined for the members of flowi") accidentally removed the setting of IPPROTO_GRE from the struct flowi in ipgre_tunnel_xmit. This patch restores it. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11ASoC: CX20442: fix wrong reg_cache_default contentJanusz Krzysztofik
Content of the CX20442's snd_soc_codec_driver.reg_cache_default pointed area, introduced with my recent NULL pointer dereferece fix (commit f019ee5feb344ff0b22b58df4568676295aae14f), occured wrong after further testing, more thorough than just booting successfully. There are two problems with it: 1) It should read (1 << CX20442_TELOUT) | (1 << CX20442_MIC), not CX20442_TELOUT | CX20442_MIC. 2) While correctly matching actual codec hardware state on boot when fixed per 1), a few more code modifications would still be required to reflect that state not only into register cache, but also force them into DAPM pins state, otherwise an inconsitency occures which may prevent further codec state changes from being applied correctly. As a result, the phone stops ringing after reboot, until someone picks up the handset for the first time. Revert that reg_cache_default content to a working, previous de facto default value of 0, in hope this change can still be accepted as an rc cycle fix. Created and tested against linux-2.6.38-rc4 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-11drm/i915: Fix resume regression from 5d1d0ccChris Wilson
The irony of the patch to fix the resume regression on PineView causing a further regression on Ironlake is not lost on me. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-by: Björn Schließmann <chronoss@gmx.de> Tested-by: Björn Schließmann <chronoss@gmx.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28802 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11drm/i915/tv: Use polling rather than interrupt-based hotplugChris Wilson
The documentation recommends that we should use a polling method for TV detection as this is more power efficient than the interrupt based mechanism (as the encoder can be completely switched off). A secondary effect is that leaving the hotplug enabled seems to be causing pipe underruns as reported by Hugh Dickins on his Crestline. Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [This is a candidate for stable, but needs minor porting to 2.6.37]
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 02:11:45 +0000