summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-23USB: cdc-acm: fix potential null-pointer dereferenceJohan Hovold
Must check return value of tty_port_tty_get. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: cdc-acm: fix memory corruption / panicJohan Hovold
Prevent read urbs from being resubmitted from tasklet after port close. The receive tasklet was not disabled on port close, which could lead to corruption of receive lists on consecutive port open. In particular, read urbs could be re-submitted before port open, added to free list in open, and then added a second time to the free list in the completion handler. cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: set line: 115200 0 0 8 cdc-acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 cdc-acm.c: acm_tty_close cdc-acm.c: acm_port_down cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da400, rcv 0xf57fbbe8, buf 0xf57fbd28 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da480, rcv 0xf57fbbd4, buf 0xf57fbd14 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da900, rcv 0xf57fbbc0, buf 0xf57fbd00 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da980, rcv 0xf57fbbac, buf 0xf57fbcec cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa00, rcv 0xf57fbb98, buf 0xf57fbcd8 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa80, rcv 0xf57fbb84, buf 0xf57fbcc4 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab00, rcv 0xf57fbb70, buf 0xf57fbcb0 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab80, rcv 0xf57fbb5c, buf 0xf57fbc9c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac00, rcv 0xf57fbb48, buf 0xf57fbc88 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac80, rcv 0xf57fbb34, buf 0xf57fbc74 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad00, rcv 0xf57fbb20, buf 0xf57fbc60 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad80, rcv 0xf57fbb0c, buf 0xf57fbc4c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da880, rcv 0xf57fbaf8, buf 0xf57fbc38 cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: Entering acm_tty_write to write 3 bytes, cdc-acm.c: Get 3 bytes... cdc-acm.c: acm_write_start susp_count: 0 cdc-acm.c: Entering acm_read_bulk with status 0 ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbc10, but was f57fbaf8 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dbf>] acm_rx_tasklet+0xef/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082e ]--- ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbd50, but was f57fbdb0 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dd6>] acm_rx_tasklet+0x106/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082f ]--- cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: disconnected from network cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: Entering acm_rx_tasklet ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:48 list_del+0xd5/0x120() Hardware name: Vostro 1520 list_del corruption, next is LIST_POISON1 (00100100) Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd875>] ? list_del+0xd5/0x120 [<c11dd875>] ? list_del+0xd5/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd875>] list_del+0xd5/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f00830 ]--- BUG: unable to handle kernel paging request at 00200200 IP: [<c11dd7bd>] list_del+0x1d/0x120 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/tty/ttyACM0/uevent Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 0T816J/Vostro 1520 EIP: 0060:[<c11dd7bd>] EFLAGS: 00010046 CPU: 0 EIP is at list_del+0x1d/0x120 EAX: f57fbd3c EBX: f57fb800 ECX: ffff8000 EDX: 00200200 ESI: f57fbe90 EDI: f57fbd3c EBP: f600bf54 ESP: f600bf3c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process ksoftirqd/0 (pid: 3, ti=f600a000 task=f60791c0 task.ti=f6082000) Stack: c1527e84 00000030 c1527e54 00100100 f57fb800 f57fbd3c f600bf98 f8051fac f8053104 f8052b94 f600bf6c c106dbab f600bf80 00000286 f60791c0 c1042b30 f57fbda8 f57f5800 f57fbdb0 f57fbd80 f57fbe7c c1656b04 00000000 f600bfb0 Call Trace: [<f8051fac>] ? acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] ? tasklet_action+0xe6/0x140 [<c104342f>] ? __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 Code: ff 48 14 e9 57 ff ff ff 90 90 90 90 90 90 55 89 e5 83 ec 18 81 38 00 01 10 00 0f 84 9c 00 00 00 8b 50 04 81 fa 00 02 20 00 74 33 <8b> 12 39 d0 75 5c 8b 10 8b 4a 04 39 c8 0f 85 b5 00 00 00 8b 48 EIP: [<c11dd7bd>] list_del+0x1d/0x120 SS:ESP 0068:f600bf3c CR2: 0000000000200200 ---[ end trace efd9a11434f00831 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 3, comm: ksoftirqd/0 Tainted: G D W 2.6.37+ #39 Call Trace: [<c13fede1>] ? printk+0x1d/0x24 [<c13fecce>] panic+0x66/0x15c [<c10067df>] oops_end+0x8f/0x90 [<c1025476>] no_context+0xc6/0x160 [<c10255a8>] __bad_area_nosemaphore+0x98/0x140 [<c103cf68>] ? release_console_sem+0x1d8/0x210 [<c1025667>] bad_area_nosemaphore+0x17/0x20 [<c1025a49>] do_page_fault+0x279/0x420 [<c1006a8f>] ? show_trace+0x1f/0x30 [<c13fede1>] ? printk+0x1d/0x24 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c140333b>] error_code+0x5f/0x64 [<c103007b>] ? select_task_rq_fair+0x37b/0x6a0 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c11dd7bd>] ? list_del+0x1d/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 panic occurred, switching back to text console ------------[ cut here ]------------ Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Fix 'bad dma' problem on WDM device disconnectRobert Lukassen
In the WDM class driver a disconnect event leads to calls to usb_free_coherent to put back two USB DMA buffers allocated earlier. The call to usb_free_coherent uses a different size parameter (desc->wMaxCommand) than the corresponding call to usb_alloc_coherent (desc->bMaxPacketSize0). When a disconnect event occurs, this leads to 'bad dma' complaints from usb core because the USB DMA buffer is being pushed back to the 'buffer-2048' pool from which it has not been allocated. This patch against the most recent linux-2.6 kernel ensures that the parameters used by usb_alloc_coherent & usb_free_coherent calls in cdc-wdm.c match. Signed-off-by: Robert Lukassen <robert.lukassen@tomtom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: wwan: fix compilation without CONFIG_PM_RUNTIMEOliver Neukum
The pm usage counter must be accessed with the proper wrappers to allow compilation under all configurations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: uss720 fixup refcount positionPeter Holik
My testprog do a lot of bitbang - after hours i got following warning and my machine lockups: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 After debugging uss720 driver i discovered that the completion callback was called before usb_submit_urb returns. The callback frees the request structure that is krefed on return by usb_submit_urb. Signed-off-by: Peter Holik <peter@holik.at> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new bfin_musb_vbus_status funcMike Frysinger
The common code has a "get" in the middle, but each implementation does not have it. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new dev_pm_ops structBob Liu
Cc: stable@kernel.org Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in platform driver nameMike Frysinger
The modularization of the Blackfin driver set the name to "musb-blackfin" in all the boards, but "musb-bfin" in the driver itself. Since the driver file name uses "blackfin", change the driver to "musb-blackfin". This is also easier as it's only one file to change. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: Fix for merge issueHema HK
There was conflict while merging 2 patches. Enabling vbus code is wrongly moved to error check if loop. This is a fix to resolve the merge issue. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23ehci-hcd: Bug fix: don't set a QH's Halt bitAlan Stern
This patch (as1453) fixes a long-standing bug in the ehci-hcd driver. There is no need to set the Halt bit in the overlay region for an unlinked or blocked QH. Contrary to what the comment says, setting the Halt bit does not cause the QH to be patched later; that decision (made in qh_refresh()) depends only on whether the QH is currently pointing to a valid qTD. Likewise, setting the Halt bit does not prevent completions from activating the QH while it is "stopped"; they are prevented by the fact that qh_completions() temporarily changes qh->qh_state to QH_STATE_COMPLETING. On the other hand, there are circumstances in which the QH will be reactivated _without_ being patched; this happens after an URB beyond the head of the queue is unlinked. Setting the Halt bit will then cause the hardware to see the QH with both the Active and Halt bits set, an invalid combination that will prevent the queue from advancing and may even crash some controllers. Apparently the only reason this hasn't been reported before is that unlinking URBs from the middle of a running queue is quite uncommon. However Test 17, recently added to the usbtest driver, does exactly this, and it confirms the presence of the bug. In short, there is no reason to set the Halt bit for an unlinked or blocked QH, and there is a very good reason not to set it. Therefore the code that sets it is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andiry Xu <andiry.xu@amd.com> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Do not pass negative length to snoop_urb()Michal Sojka
When `echo Y > /sys/module/usbcore/parameters/usbfs_snoop` and usb_control_msg() returns error, a lot of kernel memory is dumped to dmesg until unhandled kernel paging request occurs. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23perf: Better fit max unprivileged mlock pages for tools needsFrederic Weisbecker
The maximum kilobytes of locked memory that an unprivileged user can reserve is of 512 kB = 128 pages by default, scaled to the number of onlined CPUs, which fits well with the tools that use 128 data pages by default. However tools actually use 129 pages, because they need one more for the user control page. Thus the default mlock threshold is not sufficient for the default tools needs and we always end up to evaluate the constant mlock rlimit policy, which doesn't have this scaling with the number of online CPUs. Hence, on systems that have more than 16 CPUs, we overlap the rlimit threshold and fail to mmap: $ perf record ls Error: failed to mmap with 1 (Operation not permitted) Just increase the max unprivileged mlock threshold by one page so that it supports well perf tools even after 16 CPUs. Reported-by: Han Pingtian <phan@redhat.com> Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Stable <stable@kernel.org> LKML-Reference: <1300904979-5508-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-23ext4: fix a BUG in mb_mark_used during trim.Tao Ma
In a bs=4096 volume, if we call FITRIM with the following parameter as fstrim_range(start = 102400, len = 134144000, minlen = 10240), we will trigger this BUG_ON: BUG_ON(start + len > (e4b->bd_sb->s_blocksize << 3)); Mar 4 00:55:52 boyu-tm kernel: ------------[ cut here ]------------ Mar 4 00:55:52 boyu-tm kernel: kernel BUG at fs/ext4/mballoc.c:1506! Mar 4 01:21:09 boyu-tm kernel: Code: d4 00 00 00 00 49 89 fe 8b 56 0c 44 8b 7e 04 89 55 c4 48 8b 4f 28 89 d6 44 01 fe 48 63 d6 48 8b 41 18 48 c1 e0 03 48 39 c2 76 04 <0f> 0b eb fe 48 8b 55 b0 8b 47 34 3b 42 08 74 04 0f 0b eb fe 48 Mar 4 01:21:09 boyu-tm kernel: RIP [<ffffffffa053eb42>] mb_mark_used+0x47/0x26c [ext4] Mar 4 01:21:09 boyu-tm kernel: RSP <ffff880121e45c38> Mar 4 01:21:09 boyu-tm kernel: ---[ end trace 9f461696f6a9dcf2 ]--- Fix this bug by doing the accounting correctly. Cc: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-03-23cciss: fix lost command issueBud Brown
Under certain workloads a command may seem to get lost. IOW, the Smart Array thinks all commands have been completed but we still have commands in our completion queue. This may lead to system instability, filesystems going read-only, or even panics depending on the affected filesystem. We add an extra read to force the write to complete. Testing shows this extra read avoids the problem. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23bonding: fix rx_handler lockingJiri Pirko
This prevents possible race between bond_enslave and bond_handle_frame as reported by Nicolas by moving rx_handler register/unregister. slave->bond is added to hold pointer to master bonding sructure. That way dev->master is no longer used in bond_handler_frame. Also, this removes "BUG: scheduling while atomic" message Reported-by: Nicolas de Pesloüan <nicolas.2p.debian@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23Documentation/iostats.txt: bit-size reference etc.Randy Dunlap
- correction that disk stats values are native-word-sized 32-bit or 64-bit values, not always 32-bi values - drop "Last modified" entry; use git for that - fix a few typos - change "cpu" to "CPU" Reported-by: Linda Walsh <lkml@tlinx.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-23myri10ge: fix rmmod crashStanislaw Gruszka
Rmmod myri10ge crash at free_netdev() -> netif_napi_del(), because napi structures are already deallocated. To fix call netif_napi_del() before kfree() at myri10ge_free_slices(). Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23NFSv4.1 remove temp code that prevented ds commitsFred Isaman
Now that all the infrastructure is in place, we will do the right thing if we remove this special casing. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: layoutcommitAndy Adamson
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to the data server (as opposed to the MDS) and the data server WRITE is not NFS_FILE_SYNC. Only whole file layout support means that there is only one IOMODE_RW layout segment. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn> Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> Tested-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: filelayout driver specific code for COMMITFred Isaman
Implement all the hooks created in the previous patches. This requires exporting quite a few functions and adding a few structure fields. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: remove GETATTR from ds commitsFred Isaman
Any COMMIT compound directed to a data server needs to have the GETATTR calls suppressed. We here, make sure the field we are testing (data->lseg) is set and refcounted correctly. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: add generic layer hooks for pnfs COMMITFred Isaman
We create three major hooks for the pnfs code. pnfs_mark_request_commit() is called during writeback_done from nfs_mark_request_commit, which gives the driver an opportunity to claim it wants control over commiting a particular req. pnfs_choose_commit_list() is called from nfs_scan_list to choose which list a given req should be added to, based on where we intend to send it for COMMIT. It is up to the driver to have preallocated list headers for each destination it may need. pnfs_commit_list() is how the driver actually takes control, it is used instead of nfs_commit_list(). In order to pass information between the above functions, we create a union in nfs_page to hold a lseg (which is possible because the req is not on any list while in transition), and add some flags to indicate if we need to use the pnfs code. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: alloc and free commit_bucketsFred Isaman
Create a preallocated list header to hold nfs_pages for each non-MDS COMMIT destination. Note this is not necessarily each DS, but is basically each <DS, fh> pair. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: shift filelayout_free_lsegFred Isaman
Move it up to avoid forward declaration in later patch. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: pull out code from nfs_commit_releaseFred Isaman
Create a separate support function for later use by data server commit code. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: pull error handling out of nfs_commit_listFred Isaman
Create a separate support function for later use by data server commit code. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: add callback to nfs4_commit_doneFred Isaman
Add a callback that the pnfs layout driver can use to do its own error handling of the data server's COMMIT response. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: rearrange nfs_commit_rpcsetupFred Isaman
Reorder nfs_commit_rpcsetup, preparing for a pnfs entry point. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23NFSv4.1: don't send COMMIT to ds for data sync writesFred Isaman
Based on consensus reached in Feb 2011 interim IETF meeting regarding use of LAYOUTCOMMIT, it has been decided that a NFS_DATA_SYNC return from a WRITE to data server should not initiate a COMMIT. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-03-23mlx4_en: updated driver version to 1.5.4.1Yevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Using blue flame supportYevgeny Petrilin
Doorbell is used according to usage of BlueFlame. For Blue Flame to work in Ethernet mode QP number should have 0 at bits 6,7. Allocating range of QPs accordingly. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: reserve UARs for userspace consumersEli Cohen
Do not allow a kernel consumer to allocate a UAR to serve for blue flame if the number of available UARs gets below MLX4_NUM_RESERVED_UARS (currently 8). This will allow userspace apps to open a device file and run things like ibv_devinfo. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_core: maintain available field in bitmap allocatorEli Cohen
Add mlx4_bitmap_avail() to give the number of available resources. We want to use this as a hint to whether to allocate a resources or not. This patch is introduced to be used with allocation blue flame registers. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add blue flame support for kernel consumersEli Cohen
Using blue flame can improve latency by allowing the HW to more efficiently access the WQE. This patch presents two functions that are used to allocate or release HW resources for using blue flame; the caller need to supply a struct mlx4_bf object when allocating resources. Consumers that make use of this API should post doorbells to the UAR object pointed by the initialized struct mlx4_bf; Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Enabling new steeringYevgeny Petrilin
The mlx4_en module now uses the new steering mechanism. The RX packets are now steered through the MCG table instead of Mac table for unicast, and default entry for multicast. The feature is enabled through INIT_HCA Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Add support for promiscuous mode in the new steering model.Yevgeny Petrilin
For Ethernet mode only, When we want to register QP as promiscuous, it must be added to all the existing steering entries and also to the default one. The promiscuous QP might also be on of "real" QPs, which means we need to monitor every entry to avoid duplicates and ensure we close an entry when all it has is promiscuous QPs. Same mechanism both for unicast and multicast. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Wake on LAN supportYevgeny Petrilin
The driver queries the FW for WOL support. Ethtool get/set_wol is implemented accordingly. Only magic packets are supported at the time. Signed-off-by: Igor Yarovinsky <igory@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: using new mlx4 interrupt schemeYevgeny Petrilin
Each RX ring will have its own interrupt vector, and TX rings will share one (we mostly use polling for TX completions). The vectors are assigned first time device is opened, and its name includes the interface name and ring number. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4: Changing interrupt schemeYevgeny Petrilin
Adding a pool of MSI-X vectors and EQs that can be used explicitly by mlx4_core customers (mlx4_ib, mlx4_en). The consumers will assign their own names to the interrupt vectors. Those vectors are not opened at mlx4 device initialization, opened by demand. Changed the max number of possible EQs according to the new scheme, no longer relies on on number of cores. The new functionality is exposed through mlx4_assign_eq() and mlx4_release_eq(). Customers that do not use the new API will get completion vectors as before. Signed-off-by: Markuze Alex <markuze@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: bringing link up when registering netdeviceYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: optimize adaptive moderation algorithm for better latencyYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: moderation parameters are not reseted.Yevgeny Petrilin
Instead of reseting the module parameters each ifup or mtu change, they are being set once at device initialization Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: going out of range of TX rings when reporting statsYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23genirq: Provide locked setter for chip, handler, nameThomas Gleixner
Some irq_set_type() callbacks need to change the chip and the handler when the trigger mode changes. We have already a (misnomed) setter function for the handler which can be called from irq_set_type(). Provide one which allows to set chip and name as well. Put the misnomed function under the COMPAT switch and provide a replacement. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23genirq: Provide a lockdep helperThomas Gleixner
Some irq chips need to call genirq functions for nested chips from their callbacks. That upsets lockdep. So they need to set a different lock class for those nested chips. Provide a helper function to avoid open access to irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23genirq; Remove the last leftovers of the old sparse irq codeThomas Gleixner
All users converted. Get rid of it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-23ath9k: Fix TX queue stuck issue.Senthil Balasubramanian
commit 86271e460a66003dc1f4cbfd845adafb790b7587 introduced a regression that caused mac80211 queues in stopped state. ath_drain_all_txq is called in driver flush which would reset the stopped flag and the mac80211 queues were never started after that. iperf traffic is completely stalled due to this issue. Restart the mac80211 queues in driver flush only if the txqs were drained. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-23ath9k: Fix kernel panic caused by invalid rate index access.Senthil Balasubramanian
With the recent tx status optimization in mac80211, we bail out as and and when invalid rate index is found. So the behavior of resetting rate idx to -1 and count to 0 has changed for the rate indexes that were not part of the driver's retry series. This has resulted in ath9k using incorrect rate table index which caused the system to panic. Ideally ath9k need to loop only for the indexes that were part of the retry series and so simply use hw->max_rates as the loop counter. Pasted the stack trace of the panic issue for reference. [ 754.093192] BUG: unable to handle kernel paging request at ffff88046a9025b0 [ 754.093256] IP: [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] [ 754.094888] Call Trace: [ 754.094903] <IRQ> [ 754.094928] [<ffffffffa051f883>] ieee80211_tx_status+0x203/0x9e0 [mac80211] [ 754.094975] [<ffffffffa053e305>] ? __ieee80211_wake_queue+0x125/0x140 [mac80211] [ 754.095017] [<ffffffffa02e66c9>] ath_tx_complete_buf+0x1b9/0x370 [ath9k] [ 754.095054] [<ffffffffa02e6fcf>] ath_tx_complete_aggr+0x51f/0xb50 [ath9k] [ 754.095098] [<ffffffffa05382a3>] ? ieee80211_prepare_and_rx_handle+0x173/0xab0 [mac80211] [ 754.095148] [<ffffffff81350e62>] ? _raw_spin_unlock_irqrestore+0x32/0x40 [ 754.095186] [<ffffffffa02e9735>] ath_tx_tasklet+0x365/0x4b0 [ath9k] [ 754.095224] [<ffffffff8107a2a2>] ? clockevents_program_event+0x62/0xa0 [ 754.095261] [<ffffffffa02e2628>] ath9k_tasklet+0x168/0x1c0 [ath9k] [ 754.095298] [<ffffffff8105599b>] tasklet_action+0x6b/0xe0 [ 754.095331] [<ffffffff81056278>] __do_softirq+0x98/0x120 [ 754.095361] [<ffffffff8100cd5c>] call_softirq+0x1c/0x30 [ 754.095393] [<ffffffff8100efb5>] do_softirq+0x65/0xa0 [ 754.095423] [<ffffffff810563fd>] irq_exit+0x8d/0x90 [ 754.095453] [<ffffffff8100ebc1>] do_IRQ+0x61/0xe0 [ 754.095482] [<ffffffff81351413>] ret_from_intr+0x0/0x15 [ 754.095513] <EOI> [ 754.095531] [<ffffffff81014375>] ? native_sched_clock+0x15/0x70 [ 754.096475] [<ffffffffa02bcfa6>] ? acpi_idle_enter_bm+0x24d/0x285 [processor] [ 754.096475] [<ffffffffa02bcf9f>] ? acpi_idle_enter_bm+0x246/0x285 [processor] [ 754.096475] [<ffffffff8127fab2>] cpuidle_idle_call+0x82/0x100 [ 754.096475] [<ffffffff8100a236>] cpu_idle+0xa6/0xf0 [ 754.096475] [<ffffffff81339bc1>] rest_init+0x91/0xa0 [ 754.096475] [<ffffffff814efccd>] start_kernel+0x3fd/0x408 [ 754.096475] [<ffffffff814ef347>] x86_64_start_reservations+0x132/0x136 [ 754.096475] [<ffffffff814ef451>] x86_64_start_kernel+0x106/0x115 [ 754.096475] RIP [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 02:02:13 +0000