summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-01-29module: add module taint on ndiswrapperJon Masters
The struct module taints member is supposed to store per-module taint data. The kernel knows about certain specific external modules that will taint the kernel, such as ndiswrapper. Use of ndiswrapper possibly should set the per-module taint in addition to the global kernel taint flag, unless we're arguing not because wrapper module itself is not what actually causes the kernel to be tainted as such? Signed-off-by: Jon Masters <jcm@jonmasters.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: fix the module name length in param_sysfs_builtinDenis Cheng
the original code use KOBJ_NAME_LEN for built-in module name length, that's defined to 20 in linux/kobject.h, but this is not enough appearntly, many module names are longer than this; #define KOBJ_NAME_LEN 20 another macro is MODULE_NAME_LEN defined in linux/module.h, I think this is enough for module names: #define MODULE_NAME_LEN (64 - sizeof(unsigned long)) Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: make module_address_lookup safeRusty Russell
module_address_lookup releases preemption then returns a pointer into the module space. The only user (kallsyms) copies the result, so just do that under the preempt disable. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: better OOPS and lockdep coverage for loading modulesRusty Russell
If we put the module in the linked list *before* calling into to, we get the module name and functions in the OOPS (is_module_address can find the module). It also helps lockdep in a similar way. Acked-and-tested-by: Joern Engel <joern@lazybastard.org> Tested-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: Fix gratuitous sprintf in module.cRusty Russell
Andrew sent an older version of this patch: we shouldn't use sprintf to copy a string. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: wait for dependent modules doing init.Rusty Russell
There have been reports of modules failing to load because the modules they depend on are still loading. This changes the modules to wait for a reasonable length of time in that case. We time out eventually, because there can be module loops or broken modules. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29module: Don't report discarded init pages as kernel text.Rusty Russell
Current code could cause a bug in symbol_put_addr() if an arch used kmalloc module text: we might think the symbol belongs to the core kernel. The downside is that this might make backtraces through (discarded) init functions harder to read on some archs, but we already have that issue for modules and noone has complained. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] constify function pointer tables [WATCHDOG] TXx9 watchdog driver [WATCHDOG] misc_register patch [WATCHDOG] wdt: fix locking
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits) sh: add spi header and r2d platform data V3 sh: update r7780rp interrupt code sh: remove consistent alloc stuff from the machine vector sh: use declared coherent memory for dreamcast pci ethernet adapter sh: declared coherent memory support V2 sh: Add support for SDK7780 board. sh: constify function pointer tables sh: Kill off -traditional for linker script. cdrom: Add support for Sega Dreamcast GD-ROM. sh: Kill off hs7751rvoip reference from arch/sh/Kconfig. sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default. sh: Kill off dead HS771RVoIP board support. sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch. sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors. sh: r2d - enable sm501 usb host function sh: remove voyagergx sh: r2d - add lcd planel timings to sm501 platform data sh: Add OHCI and UDC platform devices for SH7720. sh: intc - remove default interrupt priority tables sh: Correct pte size mismatch for X2 TLB. ...
2008-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits) HID: ADS/Tech Radio si470x needs blacklist entry HID: Logitech Extreme 3D needs NOGET quirk HID: Refactor MS Presenter 8K key mapping HID: MS Presenter mapping for PID 0x0701 HID: Support Samsung IR remote HID: fix compilation of hidbp drivers without usbhid HID: Blacklist the Gretag-Macbeth Huey display colorimeter HID: the `bit' in hidinput_mapping_quirks() is an out parameter HID: remove redundant WARN_ON()s in order not to scare users HID: force hiddev creation for SONY PS3 controller HID: Use hid blacklist in usbmouse/usbkbd HID: proper handling of MS 4k and 6k devices HID: remove unused variable in quirk event handler HID: hid-input quirk for BTC 8193 HID: separate hid-input event quirks from generic code HID: refactor mapping to input subsystem for quirky devices HID: Microsoft Wireless Optical Desktop 3.0 quirk HID: Add support for Logitech Elite keyboards HID: add full support for Genius KB-29E HID: fix a potential bug in pointer casting ...
2008-01-29Merge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block: block: implement drain buffers __bio_clone: don't calculate hw/phys segment counts block: allow queue dma_alignment of zero blktrace: Add blktrace ioctls to SCSI generic devices
2008-01-29Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits) blk_end_request: changing xsysace (take 4) blk_end_request: changing ub (take 4) blk_end_request: cleanup of request completion (take 4) blk_end_request: cleanup 'uptodate' related code (take 4) blk_end_request: remove/unexport end_that_request_* (take 4) blk_end_request: changing scsi (take 4) blk_end_request: add bidi completion interface (take 4) blk_end_request: changing ide-cd (take 4) blk_end_request: add callback feature (take 4) blk_end_request: changing ide normal caller (take 4) blk_end_request: changing cpqarray (take 4) blk_end_request: changing cciss (take 4) blk_end_request: changing ide-scsi (take 4) blk_end_request: changing s390 (take 4) blk_end_request: changing mmc (take 4) blk_end_request: changing i2o_block (take 4) blk_end_request: changing viocd (take 4) blk_end_request: changing xen-blkfront (take 4) blk_end_request: changing viodasd (take 4) blk_end_request: changing sx8 (take 4) ...
2008-01-29Merge branch 'sg' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'sg' of git://git.kernel.dk/linux-2.6-block: SG: work with the SCSI fixed maximum allocations. SG: Convert SCSI to use scatterlist helpers for sg chaining SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
2008-01-29Merge branch 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: kill some big inlines cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions kernel: add CLONE_IO to specifically request sharing of IO contexts io_context sharing - anticipatory changes block: cfq: make the io contect sharing lockless io_context sharing - cfq changes io context sharing: preliminary support ioprio: move io priority from task_struct to io_context
2008-01-29Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (176 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ...
2008-01-29libata: Change "write_data" to "rw" for some function documentationsLinus Nilsson
The documentation for ata_data_xfer and ata_data_xfer_noirq had the 'rw' parameter named 'write_data'. Signed-off-by: Linus Nilsson <lajnold@acc.umu.se> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28HID: ADS/Tech Radio si470x needs blacklist entryTobias Lorenz
This patch adds blacklist entries in hid-quirks.c to let the usbhid driver ignore the si470x radio devices. They are now handled by the new radio-si470x driver. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Logitech Extreme 3D needs NOGET quirkJiri Kosina
Logitech Extreme 3D needs NOGET quirk, otherwise it times out at the time of connect. Reported-by: Mike Sharov <msharov@softhome.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Refactor MS Presenter 8K key mappingJan Kiszka
Following the suggestion of Jonas, this patch maps the special keys of the MS Presenter 8000 to targets that should allow for better re-mapping according to individual use cases (i.e. I avoided hard-wiring to standard keys). This time I also included the last missing key event (switching back from presentation mode). The optimal Xmodmap customization for using the Presenter with OpenOffice now looks like this for me: keycode 175 = Escape keycode 179 = F5 keysym XF86Forward = Right keysym XF86Back = Left Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: MS Presenter mapping for PID 0x0701Jiri Kosina
0x045e/0x0701 also needs the hid-input mapping quirk established by quirk_microsoft_presenter_8k(). Reported-by: Jonas Delrue <jonas_delrue@hotmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Support Samsung IR remoteRobert Schedel
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the report descriptor from the remote contains a 48 bit HID report field. HID 1.11 states: Fields may span at most 4 bytes. This patch, based on 2.6.23, fixes this by modifying the internal report descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is required to fetch the information from the hiddev interface. The burden to reconstruct the data is moved into userspace (lirc through hiddev). There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output applications, which trigger the creation of hiddev device automatically. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: fix compilation of hidbp drivers without usbhidJiri Kosina
We can use the blacklist only if usbhid code is compiled. Reported-by: jurriaan <thunder7@xs4all.nl> Cc: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Blacklist the Gretag-Macbeth Huey display colorimeterNicolas Mailhot
The Gretag-Macbeth Huey display colorimeter claims to be an HID device but isn't. As a result the linux HID device will claim it, preventing FLOSS software like Argyll CMS from talking to it. Tested-by: Frederic Crozat <fcrozat@mandriva.com> Signed-off-by: Nicolas Mailhot <nicolas.mailhot@laposte.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: the `bit' in hidinput_mapping_quirks() is an out parameterFengguang Wu
Fix a panic, by changing hidinput_mapping_quirks(,, unsigned long *bit,) to hidinput_mapping_quirks(,, unsigned long **bit,) The `bit' in this function is an out parameter. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: remove redundant WARN_ON()s in order not to scare usersJiri Kosina
The WARN_ON() in implement() and extract() spit out stacktraces and a lot of other information that might make users think that there is something seriously wrong with the system. WARN_ON() should not be deliberately triggerable by userspace application, which these can be. Usually this WARN_ON() triggers when hid2hci utility is sending the data that don't correspond to the device's report descriptor. Convert these messages to more friendly printk(). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: force hiddev creation for SONY PS3 controllerBastien Nocera
The device is not discoverable, and needs to be poked to set its master, the Bluetooth device it will try to connect to when the "Home" button is pressed without a cable plugged in. Using libusb means disconnecting the device from its driver to get the report descriptor. Using hiddev, we can poke it without relinquishing control over it, so when you plug it in, it would still work as a pad. This could be then used by sixpair program, after it is rewritten to use hiddev instead of libusb. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Use hid blacklist in usbmouse/usbkbdPascal Terjan
This fixes wacom tablets not working if usbmouse is loaded. Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: proper handling of MS 4k and 6k devicesJiri Kosina
This removes ugly macros IS_* to distinguish devices that need special handling in hid-input, and establish proper quirks for them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: remove unused variable in quirk event handlerJiri Kosina
Remove unused variable in quirk event handler. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: hid-input quirk for BTC 8193Jiri Kosina
BTC 8193 keyboard handles its scrollwheel in very non-standard way. It produces two non-standard usages for scrolling up and down, in both cases with postive value equaling to 1. We handle this by temporary mapping, which we then catch in quirk event handler, and remap to negative HWHEEL even in order to introduce correct behavior. Also the button requires special mapping, as it triggers standard-violating usage code. Reported in kernel.org bugzilla #9385 Reported-by: Kir Kolyshkin <kir@sacred.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: separate hid-input event quirks from generic codeJiri Kosina
This patch separates also the hid-input quirks that have to be applied at the time the event occurs, so that the generic code handling HUT-compliant devices is not messed up by them too much. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: refactor mapping to input subsystem for quirky devicesJiri Kosina
Currently, the handling of mapping between hid and input for devices that don't conform to HUT 1.12 specification is very messy -- no per-device handling, no blacklists, conditions on idVendor and idProduct placed all over the code. This patch moves all the device-specific input mapping to a separate file, and introduces a blacklist-style handling for non-standard device-specific mappings. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Microsoft Wireless Optical Desktop 3.0 quirkDrew Fisher
Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse. Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface class. Specifically, since it doesn't mark the second interface as a mouse (bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the interface, and then acts broken when polled. Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Add support for Logitech Elite keyboardsCarlos Corbacho
Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra keys being reported as mouse buttons. Signed-off-by: Carlos Corbacho <cathectic@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: add full support for Genius KB-29EJiri Kosina
Genius KB-29E has broken report descriptor, which causes some of the Consumer usages to appear incorrectly as Button usages. We fix it by fixing the report descriptor before it is being parsed. Also a few of the keys violate the HUT standard, so they need a special handling. They currently fall into "Reserved" range as per HUT 1.12. Reported-by: Szekeres Istvan <szekeres@iii.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: fix a potential bug in pointer castingLi Zefan
Don't directly cast list_head * to foo *, this works only when list is the first member of struct foo, and we should not make the assumption how members are ordered in the structure. i.e. struct *f = (struct *f)pos will work if: struct foo { struct list_head list; int i; }; but will fail if: struct foo { int i; struct list_head list; } Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Implement horizontal wheel handling for A4 Tech X5-005DPavel Troller
This mouse distinguishes horizontal wheel from vertical by a special "pseudo event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal wheel. Because this event is supplied by the parser too late, we need to delay a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to input depending on the event value. Signed-off-by: Pavel Troller <patrol@sinus.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Add support for Apple aluminum USB keyboards.Michel Daenzer
Reuse the existing quirks for Apple laptop USB keyboards. Signed-off-by: Michel Daenzer <michel@tungstengraphics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Rename some code identifiers from PowerBook specific to Apple genericMichel Daenzer
Preserve identifiers exposed in build and run time configuration though in order not to break existing configurations. This is in preparation for adding support for Apple aluminum USB keyboards. Signed-off-by: Michel Daenzer <michel@tungstengraphics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Map MS Presenter 8000 bottom-side buttonsJan Kiszka
The MS Presenter 8000 bluetooth mouse is a "dual-use" device: If you press a button on the top, you can turn it around and find special keys on the other side, useful for presentations. This patch maps those three bottom-keys that are not already detected to the intended functions. The magic bottom on the top is mapped to F5 when we switch from mouse to presenter mode in order to activate the presentation mode in the related software (e.g. OpenOffice). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'orion' into develRussell King
* orion: (26 commits) [ARM] Orion: implement power-off method for QNAP TS-109/209 [ARM] Orion: add support for QNAP TS-109/TS-209 [ARM] Orion: I2C support [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries [I2C] Split mv643xx I2C platform support [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323 [ARM] Orion defconfig [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323 [ARM] Orion: MV88F5181 support bits [ARM] Orion: Buffalo/Revogear Kurobox Pro support [ARM] OrionNAS RD board support [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board [ARM] Orion: common platform setup for Gigabit Ethernet port [ARM] Orion: platform device registration for UART, USB and NAND [ARM] Orion: system timer support [ARM] Orion edge GPIO IRQ support [ARM] Orion: IRQ support [ARM] Orion: provide GPIO method for enabling hardware assisted blinking [ARM] Orion: GPIO support [ARM] Orion: programable address map support ... Conflicts: arch/arm/Kconfig arch/arm/Makefile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[ARM] 4795/1: S3C244X: Add armclk and setparent callBen Dooks
Add armclk to the supported clocks on the S3C2440 and S3C2442 to better represent the DVS state which controls whether FCLK or HCLK is fed to the ARM core. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock codeBen Dooks
Merge together the bits of the S3C2440 and S3C2442 clock code that can be. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping functionBen Dooks
Add the reverse of s3c2410_gpio_getirq to convert a IRQ number into a GPIO pin number. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.SBen Dooks
Remove warnings left in include/asm-arm/arch-s3c2410/debug-macro.S whilst these where being experimented with. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4791/1: S3C2412: Make fclk a parent of msysclkBen Dooks
In the S3C2412 fclk is derived from msysclk, not straight from the MPLL output. Set clk_f.parent appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.Ben Dooks
The msysclk clock was checking for the wrong PLL for the parent in s3c2412_setparent_msysclk(), trying the UPLL instead of the MPLL output. Also ensure the mpll and fclks are at the same rate at init time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4789/1: S3C2412: Add missing CLKDIVN register valuesBen Dooks
Add S3C2412_CLKDIVN_DVSEN and S3C2412_CLKDIVN_HALFHCLK definitions to the S3C2412_CLKDIVN set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-08 13:36:57 +0000