summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-04-11bonding:set save_load to 0 when initializingPeter Pan(潘卫平)
It is unnecessary to set save_load to 1 here, as the tx_hashtbl is just kzalloced. Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driverSangbeom Kim
Fix the inverted clocks handling for pcm cpu driver. By using SND_SOC_DAIFMT_NB_NF, Audio noise can be generated on SMDK. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: sst_platform: Fix lock acquringLu Guanqun
Fix the possible dead lock shown below: spin_lock sst_get_stream_status sst_period_elapsed intel_sst_interrupt handle_IRQ_event handle_fasteoi_irq do_IRQ common_interrupt spin_lock sst_set_stream_status sst_platform_pcm_trigger Signed-off-by: Lu Guanqun <guanqun.lu@intel.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: driver safely remove for against irqKuninori Morimoto
free_irq and pm_runtime_disable should be called before snd_soc_unregister_xxx Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: modify vague PM control on probeKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11ASoC: fsi: take care in failing case of dai registerKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-11stmmac: fix Transmit Underflow errorGiuseppe CAVALLARO
On some old MAC chips without COE sometime the Transmit Underflow error is issued. The driver aborted all the transmission process and initialized it from scratch. This breaks the network activity as raised by Nachiketa on a SPEAr board. The patch is to fix this rare underflow event. The driver will only clear the interrupt and the Tx DMA will go out the Suspend state as soon as the descriptor is fetched again. The driver will continue to bump-up the DMA FIFO threshold that, indeed, helped somebody to prevent this kind of error in the past as well. Reported-by: Nachiketa Prachanda <nprachanda@ncomputing.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11stmmac: fix open funct when exit on errorGiuseppe CAVALLARO
This patch reviews the open function and fixes some errors when exit with an error state. It also moves the request_irq after core is initialized when interrupts are properly masked. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11stmmac: fixed dma lib build when turn-on the debug optionGiuseppe CAVALLARO
This patch fixes a compilation error when build the dwmac_lib with the DEBUG option enabled. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-11iwlegacy: make iwl3945 and iwl4965 select IWLWIFI_LEGACYJohn W. Linville
Otherwise, IWLWIFI_LEGACY has to be selected independently before the drivers are made available. Reported-by: Dave Airlie <airlied@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-04-11pci: fix PCI bus allocation alignment handlingLinus Torvalds
In commit 13583b16592a ("PCI: refactor io size calculation code") Ram had a thinko in the refactorization of the code: the end result used the variable 'align' for the bus alignment, but the original code used 'min_align'. Since then, another use of that 'align' variable got introduced by commit c8adf9a3e873 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") Fix both of those uses to use 'min_align' as they should. Daniel Hellstrom <daniel@gaisler.com> Acked-by: Ram Pai <linuxram@us.ibm.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11x86/ce4100: Add reg property to bridgesSebastian Andrzej Siewior
without the reg property Ben's new code won't find the PCI & ISA bridge and the devices won't get the DT-node attached. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: monstr@monstr.eu Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: http://lkml.kernel.org/r/20110407121315.GA9204@linutronix.de Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
2011-04-11block: splice plug list to local contextNeilBrown
If the request_fn ends up blocking, we could be re-entering the plug flush. Since the list is protected by explicitly not allowing schedule events, this isn't a terribly good idea. Additionally, it can cause us to recurse. As request_fn called by __blk_run_queue is allowed to 'schedule()' (after dropping the queue lock of course), it is possible to get a recursive call: schedule -> blk_flush_plug -> __blk_finish_plug -> flush_plug_list -> __blk_run_queue -> request_fn -> schedule We must make sure that the second schedule does not call into blk_flush_plug again. So instead of leaving the list of requests on blk_plug->list, move them to a separate list leaving blk_plug->list empty. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-11sched: Fix erroneous all_pinned logicKen Chen
The scheduler load balancer has specific code to deal with cases of unbalanced system due to lots of unmovable tasks (for example because of hard CPU affinity). In those situation, it excludes the busiest CPU that has pinned tasks for load balance consideration such that it can perform second 2nd load balance pass on the rest of the system. This all works as designed if there is only one cgroup in the system. However, when we have multiple cgroups, this logic has false positives and triggers multiple load balance passes despite there are actually no pinned tasks at all. The reason it has false positives is that the all pinned logic is deep in the lowest function of can_migrate_task() and is too low level: load_balance_fair() iterates each task group and calls balance_tasks() to migrate target load. Along the way, balance_tasks() will also set a all_pinned variable. Given that task-groups are iterated, this all_pinned variable is essentially the status of last group in the scanning process. Task group can have number of reasons that no load being migrated, none due to cpu affinity. However, this status bit is being propagated back up to the higher level load_balance(), which incorrectly think that no tasks were moved. It kick off the all pinned logic and start multiple passes attempt to move load onto puller CPU. To fix this, move the all_pinned aggregation up at the iterator level. This ensures that the status is aggregated over all task-groups, not just last one in the list. Signed-off-by: Ken Chen <kenchen@google.com> Cc: stable@kernel.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/BANLkTi=ernzNawaR5tJZEsV_QVnfxqXmsQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11sched: Fix sched-domain avg_load calculationKen Chen
In function find_busiest_group(), the sched-domain avg_load isn't calculated at all if there is a group imbalance within the domain. This will cause erroneous imbalance calculation. The reason is that calculate_imbalance() sees sds->avg_load = 0 and it will dump entire sds->max_load into imbalance variable, which is used later on to migrate entire load from busiest CPU to the puller CPU. This has two really bad effect: 1. stampede of task migration, and they won't be able to break out of the bad state because of positive feedback loop: large load delta -> heavier load migration -> larger imbalance and the cycle goes on. 2. severe imbalance in CPU queue depth. This causes really long scheduling latency blip which affects badly on application that has tight latency requirement. The fix is to have kernel calculate domain avg_load in both cases. This will ensure that imbalance calculation is always sensible and the target is usually half way between busiest and puller CPU. Signed-off-by: Ken Chen <kenchen@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20110408002322.3A0D812217F@elm.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11perf_event: Fix cgrp event scheduling bug in perf_enable_on_exec()Stephane Eranian
There is a bug in perf_event_enable_on_exec() when cgroup events are active on a CPU: the cgroup events may be scheduled twice causing event state corruptions which eventually may lead to kernel panics. The reason is that the function needs to first schedule out the cgroup events, just like for the per-thread events. The cgroup event are scheduled back in automatically from the perf_event_context_sched_in() function. The patch also adds a WARN_ON_ONCE() is perf_cgroup_switch() to catch any bogus state. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110406005454.GA1062@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-10dt/fsldma: fix build warning caused by of_platform_device changesIra W. Snyder
Commit 000061245a6797d542854106463b6b20fbdcb12e, "dt/powerpc: Eliminate users of of_platform_{,un}register_driver" forgot to convert the type of structure passed into platform_device_register() when it was converted from of_platform_device_register. Fix it. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-04-11Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next ↵Dave Airlie
into drm-fixes * 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nvc0: improve vm flush function drm/nv50-nvc0: remove some code that doesn't belong here drm/nv50: use "nv86" tlb flush method on everything except 0x50/0xac drm/nouveau: quirk for XFX GT-240X-YA drm/nv50-nvc0: work around an evo channel hang that some people see drm/nouveau: implement init table opcode 0x5c drm/nouveau: fix oops on unload with disabled LVDS panel nv30: Fix parsing of perf table drm/nouveau: correct memtiming table parsing for nv4x
2011-04-10ext4: fix data corruption regression by reverting commit 6de9843dab3fTheodore Ts'o
Revert commit 6de9843dab3f2a1d4d66d80aa9e5782f80977d20, since it caused a data corruption regression with BitTorrent downloads. Thanks to Damien for discovering and bisecting to find the problem commit. https://bugzilla.kernel.org/show_bug.cgi?id=32972 Reported-by: Damien Grassart <damien@grassart.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10ext4: Allow indirect-block file to grow the file size to max file sizeKazuya Mio
We can create 4402345721856 byte file with indirect block mapping. However, if we grow an indirect-block file to the size with ftruncate(), we can see an ext4 warning. The following patch fixes this problem. How to reproduce: # dd if=/dev/zero of=/mnt/mp1/hoge bs=1 count=0 seek=4402345721856 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000221428 s, 0.0 kB/s # tail -n 1 /var/log/messages Nov 25 15:10:27 test kernel: EXT4-fs warning (device sda8): ext4_block_to_path:345: block 1074791436 > max in inode 12 Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10ext4: allow an active handle to be started when freezingYongqiang Yang
ext4_journal_start_sb() should not prevent an active handle from being started due to s_frozen. Otherwise, deadlock is easy to happen, below is a situation. ================================================ freeze | truncate ================================================ | ext4_ext_truncate() freeze_super() | starts a handle sets s_frozen | | ext4_ext_truncate() | holds i_data_sem ext4_freeze() | waits for updates | | ext4_free_blocks() | calls dquot_free_block() | | dquot_free_blocks() | calls ext4_dirty_inode() | | ext4_dirty_inode() | trys to start an active | handle | | block due to s_frozen ================================================ Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Amir Goldstein <amir73il@users.sf.net> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2011-04-10ext4: sync the directory inode in ext4_sync_parent()Curt Wohlgemuth
ext4 has taken the stance that, in the absence of a journal, when an fsync/fdatasync of an inode is done, the parent directory should be sync'ed if this inode entry is new. ext4_sync_parent(), which implements this, does indeed sync the dirent pages for parent directories, but it does not sync the directory *inode*. This patch fixes this. Also now return error status from ext4_sync_parent(). I tested this using a power fail test, which panics a machine running a file server getting requests from a client. Without this patch, on about every other test run, the server is missing many, many files that had been synced. With this patch, on > 6 runs, I see zero files being lost. Google-Bug-Id: 4179519 Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10net: Add support for SMSC LAN9530, LAN9730 and LAN89530Steve Glendinning
This patch adds support for SMSC's LAN9530, LAN9730 and LAN89530 USB ethernet controllers to the existing smsc95xx driver by adding their new USB VID/PID pairs. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile.Justin P. Mattock
The patch below removes an unused config variable found by using a kernel cleanup script. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6868/1: Preserve the VFP state during forkCatalin Marinas
VFP registers d16-d31 are callee saved registers and must be preserved during function calls, including fork(). The VFP configuration should also be preserved. The patch copies the full VFP state to the child process. Reported-by: Paul Wright <paul.wright@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6867/1: Introduce THREAD_NOTIFY_COPY for copy_thread() hooksCatalin Marinas
This patch adds THREAD_NOTIFY_COPY for calling registered handlers during the copy_thread() function call. It also changes the VFP handler to use a switch statement rather than if..else and ignore this event. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6866/1: Do not restrict HIGHPTE to !OUTER_CACHECatalin Marinas
The HIGHPTE config option depends on !OUTER_CACHE. However, there is no set_pte_ext() function that does outer cache maintenance by physical address, hence no need for such restriction. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6865/1: perf: ensure pass through zero is counted on overflowWill Deacon
Commit a737823d ("ARM: perf: ensure overflows aren't missed due to IRQ latency") changed the way that event deltas are calculated on overflow so that we don't miss events when the new count value overtakes the previous one. Unfortunately, we forget to count the event that passes through zero so we end up being off by 1. This patch adds on the correction. Reported-by: Chris Moore <moore@free.fr> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10ARM: 6864/1: hw_breakpoint: clear DBGVCR out of resetWill Deacon
The DBGVCR, used for configuring vector catch debug events, is UNKNOWN out of reset on ARMv7. When enabling monitor mode, this must be zeroed to avoid UNPREDICTABLE behaviour. This patch adds the zeroing code to the debug reset path. Cc: stable <stable@kernel.org> Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't query connections for widgets have no connections ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E) ALSA: hda - HDMI: Fix MCP7x audio infoframe checksums ALSA: usb-audio: define another USB ID for a buggy USB MIDI cable ALSA: HDA: Fix dock mic for Lenovo X220-tablet ASoC: format_register_str: Don't clip register values ASoC: PXA: Fix oops in __pxa2xx_pcm_prepare ASoC: zylonite: set .codec_dai_name in initializer
2011-04-10nfsd4: fix oops on lock failureJ. Bruce Fields
Lock stateid's can have access_bmap 0 if they were only partially initialized (due to a failed lock request); handle that case in free_generic_stateid. ------------[ cut here ]------------ kernel BUG at fs/nfsd/nfs4state.c:380! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run Modules linked in: nfs fscache md4 nls_utf8 cifs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc nfsd lockd nfs_acl auth_rpcgss sunrpc ipv6 ppdev parport_pc parport pcnet32 mii pcspkr microcode i2c_piix4 BusLogic floppy [last unloaded: mperf] Pid: 1468, comm: nfsd Not tainted 2.6.38+ #120 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[<e24f180d>] EFLAGS: 00010297 CPU: 0 EIP is at nfs4_access_to_omode+0x1c/0x29 [nfsd] EAX: ffffffff EBX: dd758120 ECX: 00000000 EDX: 00000004 ESI: dd758120 EDI: ddfe657c EBP: dd54dde0 ESP: dd54dde0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process nfsd (pid: 1468, ti=dd54c000 task=ddc92580 task.ti=dd54c000) Stack: dd54ddf0 e24f19ca 00000000 ddfe6560 dd54de08 e24f1a5d dd758130 deee3a20 ddfe6560 31270000 dd54df1c e24f52fd 0000000f dd758090 e2505dd0 0be304cf dbb51d68 0000000e ddfe657c ddcd8020 dd758130 dd758128 dd7580d8 dd54de68 Call Trace: [<e24f19ca>] free_generic_stateid+0x1c/0x3e [nfsd] [<e24f1a5d>] release_lockowner+0x71/0x8a [nfsd] [<e24f52fd>] nfsd4_lock+0x617/0x66c [nfsd] [<e24e57b6>] ? nfsd_setuser+0x199/0x1bb [nfsd] [<e24e056c>] ? nfsd_setuser_and_check_port+0x65/0x81 [nfsd] [<c07a0052>] ? _cond_resched+0x8/0x1c [<c04ca61f>] ? slab_pre_alloc_hook.clone.33+0x23/0x27 [<c04cac01>] ? kmem_cache_alloc+0x1a/0xd2 [<c04835a0>] ? __call_rcu+0xd7/0xdd [<e24e0dfb>] ? fh_verify+0x401/0x452 [nfsd] [<e24f0b61>] ? nfsd4_encode_operation+0x52/0x117 [nfsd] [<e24ea0d7>] ? nfsd4_putfh+0x33/0x3b [nfsd] [<e24f4ce6>] ? nfsd4_delegreturn+0xd4/0xd4 [nfsd] [<e24ea2c9>] nfsd4_proc_compound+0x1ea/0x33e [nfsd] [<e24de6ee>] nfsd_dispatch+0xd1/0x1a5 [nfsd] [<e1d6e1c7>] svc_process_common+0x282/0x46f [sunrpc] [<e1d6e578>] svc_process+0xdc/0xfa [sunrpc] [<e24de0fa>] nfsd+0xd6/0x115 [nfsd] [<e24de024>] ? nfsd_shutdown+0x24/0x24 [nfsd] [<c0454322>] kthread+0x62/0x67 [<c04542c0>] ? kthread_worker_fn+0x114/0x114 [<c07a6ebe>] kernel_thread_helper+0x6/0x10 Code: eb 05 b8 00 00 27 4f 8d 65 f4 5b 5e 5f 5d c3 83 e0 03 55 83 f8 02 89 e5 74 17 83 f8 03 74 05 48 75 09 eb 09 b8 02 00 00 00 eb 0b <0f> 0b 31 c0 eb 05 b8 01 00 00 00 5d c3 55 89 e5 57 56 89 d6 8d EIP: [<e24f180d>] nfs4_access_to_omode+0x1c/0x29 [nfsd] SS:ESP 0068:dd54dde0 ---[ end trace 2b0bf6c6557cb284 ]--- The trace route is: -> nfsd4_lock() -> if (lock->lk_is_new) { -> alloc_init_lock_stateid() 3739: stp->st_access_bmap = 0; ->if (status && lock->lk_is_new && lock_sop) -> release_lockowner() -> free_generic_stateid() -> nfs4_access_bmap_to_omode() -> nfs4_access_to_omode() 380: BUG(); ***** This problem was introduced by 0997b173609b9229ece28941c118a2a9b278796e. Reported-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Tested-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-04-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region mtd: atmel_nand: modify test case for using DMA operations mtd: atmel_nand: fix support for CPUs that do not support DMA access mtd: atmel_nand: trivial: change DMA usage information trace mtd: mtdswap: fix printk format warning
2011-04-09Merge branch 'fix/hda' into for-linusTakashi Iwai
2011-04-09Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-04-09drm/radeon/kms: make radeon i2c put/get bytes less noisyAlex Deucher
Switch some errors to debug output. These are generally harmless and tend to confuse users. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09drm/radeon/kms: pll tweaks for rv6xxAlex Deucher
Prefer minm over maxp. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35994 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09drm/radeon: Fix KMS legacy backlight support if CONFIG_BACKLIGHT_CLASS_DEVICE=m.Michel Dänzer
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09radeon: Fix KMS CP writeback on big endian machines.Michel Dänzer
This is necessary even with PCI(e) GART, and it makes writeback work even with AGP on my PowerBook. Might still be unreliable with older revisions of UniNorth and other AGP bridges though. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Reviewed-by: Alex Deucher <alex.deucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-09MAINTAINERS: Update Samsung ASoC maintainer's idJassi Brar
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-09i915: restore only the mode of this driver on lastcloseDave Airlie
This has always used a big hammer, but that hammer is probably too big, I'm also not sure its necessary but at least this should be safe. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=23592 Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-08Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Change initial mount authflavor only when server returns NFS4ERR_WRONGSEC NFS: Fix a signed vs. unsigned secinfo bug Revert "net/sunrpc: Use static const char arrays"
2011-04-08signal.c: fix erroneous syscall kernel-docRandy Dunlap
Fix erroneous syscall kernel-doc comments in kernel/signal.c. Reported-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-08p54: Initialize extra_len in p54_tx_80211Jason Conti
This patch fixes a very serious off-by-one bug in the driver, which could leave the device in an unresponsive state. The problem was that the extra_len variable [used to reserve extra scratch buffer space for the firmware] was left uninitialized. Because p54_assign_address later needs the value to reserve additional space, the resulting frame could be to big for the small device's memory window and everything would immediately come to a grinding halt. Reference: https://bugs.launchpad.net/bugs/722185 Cc: <stable@kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Jason Conti <jason.conti@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-08ath9k: fix missing ath9k_ps_wakeup/ath9k_ps_restore callsFelix Fietkau
These missing chip wakeups mainly cause crashes on AR5416 cards in MIPS boards, but have also been reported to cause radio stability issues on AR9285. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-08Btrfs: check for duplicate iov_base's when doing dio readsJosef Bacik
Apparently it is ok to submit a read to an IDE device with the same target page for different offsets. This is what Windows does under qemu. The problem is under DIO we expect them to be different buffers for checksumming reasons, and so this sort of thing will result in checksum errors, when in reality the file is fine. So when reading, check to make sure that all iov bases are different, and if they aren't fall back to buffered mode, since that will work out right. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-08Btrfs: reuse the extent_map we found when calling btrfs_get_extentJosef Bacik
In btrfs_get_block_direct we call btrfs_get_extent to lookup the extent for the range that we are looking for. If we don't find an extent, btrfs_get_extent will insert a extent_map for that area and mark it as a hole. So it does the job of allocating a new extent map and inserting it into the io tree. But if we're creating a new extent we free it up and redo all of that work. So instead pass the em to btrfs_new_extent_direct(), and if it will work just allocate the disk space and set it up properly and bypass the freeing/allocating of a new extent map and the expensive operation of inserting the thing into the io_tree. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-08Btrfs: do not use async submit for small DIO io'sJosef Bacik
When looking at our DIO performance Chris said that for small IO's doing the async submit stuff tends to be more overhead than it's worth. With this on top of my other fixes I get about a 17-20% speedup doing a sequential dd with 4k IO's. Basically if we don't have to split the bio for the map length it's small enough to be directly submitted, otherwise go back to the async submit. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-08Btrfs: don't split dio bios if we don't have toJosef Bacik
We have been unconditionally allocating a new bio and re-adding all pages from our original bio to the new bio. This is needed if our original bio is larger than our stripe size, but if it is smaller than the stripe size then there is no need to do this. So check the map length and if we are under that then go ahead and submit the original bio. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:47:52 +0000