summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-03-10drbd: improve on bitmap write out timingLars Ellenberg
Even though we now track the need for bitmap writeout per bitmap page, there is no need to trigger the writeout while a resync is going on. Once the resync is finished (or aborted), we trigger bitmap writeout anyways. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: spelling fix in log messageLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: be less noisy with some log messagesLars Ellenberg
We expect changes to a bitmap page in drbd_bm_write_page, that's why we submit a copy page. If a page changes during global writeout, that would be unexpected, and reason to warn, though. Also, often page writeout can be skipped (on activity log transactions during normal operation, for example), no need to log that everytime. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: serialize sending of resync uuid with pending w_send_oosLars Ellenberg
To improve the latency of IO requests during bitmap exchange, we recently allowed writes while waiting for the bitmap, sending "set out-of-sync" information packets for any newly dirtied bits. We have to make sure that the new resync-uuid does not overtake these "set oos" packets. Once the resync-uuid is received, the sync target starts the resync process, and expects the bitmap to only be cleared, not re-set. If we use this protocol extension, we queue the generation and sending of the resync-uuid on the worker, which naturally serializes with all previously queued packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: add debugging assert to make sure the protocol is cleanLars Ellenberg
We expect to only receive the recently introduced "set out of sync" packets in specific states. If we receive them in different states, that may confuse the resync process to the point where it won't terminate, or think it made negative progress. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Documenting drbd_should_do_remote() and drbd_should_send_oos()Philipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: fix potential dereference of NULL pointerLars Ellenberg
If drbd used to have crypto digest algorithms configured, then is being unconfigured (but not unloaded), it frees the algorithms, but does not reset the config. If it then is reconfigured to use the very same algorithm, it "forgot" to re-allocate the algorithms, thinking that the config has not changed in that aspect. It will then Oops on the first attempt to actually use those algorithms. Fix this by resetting the config to defaults after cleanup. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: move bitmap write from resync_finished to after_state_changeLars Ellenberg
We must not call it directly from resync_finished, as we may be in either receiver or worker context there. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Removed a reference to debug macros removed long time agoLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: get rid of unused debug codeLars Ellenberg
Long time ago, we had paranoia code in the bitmap that allocated one extra word, assigned a magic value, and checked on every occasion that the magic value was still unchanged. That debug code is unused, the extra long word complicates code a bit. Get rid of it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: allow petabyte storage on 64bit archLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: bitmap keep track of changes vs on-disk bitmapLars Ellenberg
When we set or clear bits in a bitmap page, also set a flag in the page->private pointer. This allows us to skip writes of unchanged pages. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: store in-core bitmap little endian, regardless of architectureLars Ellenberg
Our on-disk bitmap is a little endian bitstream. Up to now, we have stored the in-core copy of that in native endian, applying byte order conversion when necessary. Instead, keep the bitmap pages little endian, as they are read from disk, and use the generic_*_le_bit family of functions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: bitmap: don't count unused bits (fix non-terminating resync)Lars Ellenberg
We trusted the on-disk bitmap to have unused bits cleared. In case that is not true for whatever reason, and we take a code path where the unused bits don't get cleared elsewhere (bm_clear_surplus is not called), we may miscount the bits, and get confused during resync, waiting for bits to get cleared that we don't even use: the resync process would not terminate. Fix this by masking out unused bits in __bm_count_bits. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Rename __inc_ap_bio_cond to may_inc_ap_bioAndreas Gruenbacher
The old name is confusing: the function does not increment anything. Also rename _inc_ap_bio_cond to inc_ap_bio_cond: there is no need for an underscore. Finally, make it clear that these functions return boolean values. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Fix: drbd_bitmap_io does not return an enum determine_dev_sizeAndreas Gruenbacher
I guess bitmap I/O errors are supposed to cause drbd_determin_dev_size to return dev_size_error. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: receive_bitmap_plain: Get rid of ugly and useless enumAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: send_bitmap_rle_or_plain: Get rid of ugly and useless enumAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: receive_bitmap: Missing free_page() on error pathAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: receive_bitmap: Avoid casting enum drbd_state_rv to intAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: receive_bitmap: Fix the wrong return valueAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: drbd_nl_disk_conf: Avoid a compiler warningAndreas Gruenbacher
Warning: comparison between ‘enum drbd_ret_code’ and ‘enum drbd_state_rv’ Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Use the standard bool, true, and false keywordsAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: This code is dead nowAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Another small enum drbd_state_rv cleanupAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Be more explicit about functions that return an enum drbd_state_rvAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Rename enum drbd_state_ret_codes to enum drbd_state_rvAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Rename enum drbd_ret_codes to enum drbd_ret_codeAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Get rid of unnecessary macros (2)Andreas Gruenbacher
The FAULT_ACTIVE macro just wraps the drbd_insert_fault macro for no apparent reason. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Get rid of unnecessary macros (1)Andreas Gruenbacher
This macro doesn't save much code, but makes things a lot harder to read. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Rename drbd_make_request_26 to drbd_make_requestAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Remove left-over prototypeAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Make sure that drbd_send() has sent the right number of bytesAndreas Gruenbacher
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2011-03-10drbd: fix incomplete error messageLars Ellenberg
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Removed an unnecessary #undefAndreas Gruenbacher
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: fix regression, we need to close drbd epochs during normal operationLars Ellenberg
commit e2041475e6ddb081734d161f6421977323f5a9b9 drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmap Contained a bad chunk that tried to optimize away drbd barriers during bitmap exchange, but accidentally dropped them for normal mode as well. Impact: depending on activity log size and access pattern, activity log extents may not be recycled in time, causeing IO to block indefinetely. Fix: skip drbd barriers only if there is no connection to send them on, or the request being completed has not been on the network at all. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Implemented the before-resync-source handlerPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: --force option for disconnectPhilipp Reisner
As the network connection can be lost at any time, a --force option for disconnect is just a matter of completeness. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: add packet_type 27 (return_code_only) to netlink apiLars Ellenberg
In case we ever should add an other packet type, we must not reuse 27, as that currently used for "empty" return code only replies. Document it as such. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: use kzalloc and memset(,0,) to start with clean buffers in drbd_nlLars Ellenberg
Make sure we start with clean buffers to not accidentally send garbage back to userspace. Note: has not been observed; but just in case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: remove /proc/drbd before unregistering from netlinkLars Ellenberg
There still exists a (theoretical) race on module unload, where /proc/drbd may still exist, but the netlink callback has been unregistered already, allowing drbdsetup to shout without listeners, and get no reply. Reorder remove_proc_entry and unregister of netlink callback. drbdsetup first checks for existence of the proc entry, and if that is missing, won't even try to contact the module. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: increase module count on /proc/drbd accessLars Ellenberg
If someone holds /proc/drbd open, previously rmmod would "succeed" in starting the unload, but then block on remove_proc_entry, leading to a situation where the lsmod does not show drbd anymore, but /proc/drbd being still there (but no longer accessible). I'd rather have rmmod fail up front in this case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Removed 20 seconds upper bound for side-steppingPhilipp Reisner
Given low-enough network bandwidth combined with a IO pattern that hammers onto a single RS-extent, side-stepping might be necessary for much longer times. Changed the code to print a single informal message after 20 seconds, but it keeps on stepping aside forever. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Becoming sync target may not happen out of < C_WF_REPORT_PARAMSPhilipp Reisner
This patch is acutally a necessary addendum to the patch "fix for spurious full sync (becoming sync target looked like invalidate)" Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Starting with protocol 96 we can allow app-IO while receiving the bitmapPhilipp Reisner
* C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets written to disk. Locking out of app-IO is done by using the drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days. It is no longer necessary to lock out app-IO based on the connection state. App-IO that may come in after the BITMAP_IO flag got cleared before the state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets a bit in the local bitmap, that is already set, therefore changes nothing. * C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets). With that we make sure they have the same number of bits when going into the C_SYNC_(SOURCE|TARGET) connection state. * C_UNCONNECTED: The receiver starts, no need to lock out IO. * C_DISCONNECTING: in drbd_disconnect() we had a wait_event() to wait until ap_bio_cnt reaches 0. Removed that. * C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING * C_WF_REPORT_PARAMS: IO still possible since that is still like C_WF_CONNECTION. And we do not need to send barriers in C_WF_BITMAP_S connection state. Allow concurrent accesses to the bitmap when receiving the bitmap. Everything gets ORed anyways. A drbd_free_tl_hash() is in after_state_chg_work(). At that point all the work items of the last connections must have been processed. Introduced a call to drbd_free_tl_hash() into drbd_free_mdev() for paranoia reasons. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Improvements in sanitize_state()Philipp Reisner
The relevant change is that the state change to C_FW_BITMAP_S should implicitly change pdsk to C_CONSISTENT. (Think of it as C_OUTDATED, only without the guarantee that the peer has the outdated written to its meta data) At that opportunity I restructured the switch statement so that it gets evaluated every time. (Has declarative character) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Fixed race condition in drbd_queue_bitmap_ioPhilipp Reisner
May only test for ap_bio_cnt == 0 under req_lock. It can increase only under req_lock. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Fixed inc_ap_bio()Philipp Reisner
The condition must be checked after perpare_to_wait(). The old implementaion could loose wakeup events. Never observed in real life. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: use test_and_set_bit() to decide if bm_io_work should be queuedPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-03-10drbd: Begin to account BIO processing time before inc_ap_bio()Philipp Reisner
Since inc_ap_bio() might sleep already Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-02 18:53:34 +0000