summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-02-26tc35815: Fix double locking on NAPIAtsushi Nemoto
Isolate spinlock for tx and rx to resolve double-locking. This is potential bug while this controller does not exist on any SMP platforms, but lockdep or rt-preempt reveals this bug. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26isa-skelton: Remove a wrong netif_wake_queue() callAtsushi Nemoto
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from net_tx(). So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger tx-ring overflow. This fix is ported from commit 662a96bd6f020782dfbdc0d0bd177c7dbb556687 ("tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON"). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26octeon: convert to use netdev_for_each_mc_addrJiri Pirko
Hmm so actually my original patch including this bit was correct, "list = list->next;" confused me :) - will send patch correcting that in a few. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part6Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part5 V2Jiri Pirko
removed some needless checks and also corrected bug in lp486e (dmi was passed instead of dmi->dmi_addr) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26can: netlink support for bus-error reporting and countersWolfgang Grandegger
This patch makes the bus-error reporting configurable and allows to retrieve the CAN TX and RX bus error counters via netlink interface. I have added support for the SJA1000. The TX and RX bus error counters are also copied to the data fields 6..7 of error messages when state changes are reported. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26drivers/net/myri10ge: Use pr_<level> and netdev_<level>Joe Perches
Add #define pr_fmt(fmt) Convert logging messages to pr_<level> and netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26drivers/net/chelsio: Use pr_<level>, netif_msg_<type>Joe Perches
Convert CH_<level> and CH_DBG uses to pr_<level> and netif equivalents Remove CH_<level> and CH_DBG macro definitions Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26isdn: remove ishexdigit() in regard to isxdigit()Andy Shevchenko
Samll cleanup in drivers/isdn/gigaset/capi.c where own implementation of isxdigit() has been changed to kernel native one. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26gigaset: reduce syslog clutterTilman Schmidt
Improve readability of the Gigaset driver's kernel messages by removing a few unnecessary messages and limiting the emission of some debug messages more narrowly. Impact: logging Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26bas_gigaset: collapse CR/LF at end of AT responseTilman Schmidt
Copy the mechanism from ser_/usb_gigaset to avoid producing spurious empty responses for CR/LF sequences from the device. Add a comment in all drivers documenting that behaviour. Correct an off by one error that might result in a one byte buffer overflow when receiving an unexpectedly long reply. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26gigaset: small documentation improvementTilman Schmidt
Clarify the non-support by isdnlog, and propose a better standard debug mask. Impact: Documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26KS8695: Don't call netif_carrier_off() from ndo_stop()Yegor Yefremov
netif_carrier_on() and netif_carrier_off() should be called from link status interrupt handler Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-24netfilter: xtables: reduce arguments to translate_tableJan Engelhardt
Just pass in the entire repl struct. In case of a new table (e.g. ip6t_register_table), the repldata has been previously filled with table->name and table->size already (in ip6t_alloc_initial_table). Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: optimize call flow around xt_ematch_foreachJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: replace XT_MATCH_ITERATE macroJan Engelhardt
The macro is replaced by a list.h-like foreach loop. This makes the code more inspectable. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: optimize call flow around xt_entry_foreachJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-24netfilter: xtables: replace XT_ENTRY_ITERATE macroJan Engelhardt
The macro is replaced by a list.h-like foreach loop. This makes the code much more inspectable. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23net: bug fix for vlan + gro issueAjit Khaparde
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23xfrm: clone mark when cloning policyJamal Hadi Salim
When we clone the SP, we should also clone the mark. Useful for socket based SPs. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23netfilter: xt_recent: fix false matchTim Gardner
A rule with a zero hit_count will always match. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23netfilter: xt_recent: fix buffer overflowTim Gardner
e->index overflows e->stamps[] every ip_pkt_list_tot packets. Consider the case when ip_pkt_list_tot==1; the first packet received is stored in e->stamps[0] and e->index is initialized to 1. The next received packet timestamp is then stored at e->stamps[1] in recent_entry_update(), a buffer overflow because the maximum e->stamps[] index is 0. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: stable@kernel.org Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-23tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ONAtsushi Nemoto
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)Torgny Johansson
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23IPv6: better document max_addresses parameterBrian Haley
Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23MAINTAINERS: update mv643xx_eth maintenance statusLennert Buytenhek
I am no longer with Marvell. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: Fix DMA mapping error handling on RXAnton Blanchard
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: correct wrong coding style for "else"Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: Allow user space manipulation of SPD markJamal Hadi Salim
Add ability for netlink userspace to manipulate the SPD and manipulate the mark, retrieve it and get events with a defined mark, etc. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: Allow user space config of SAD markJamal Hadi Salim
Add ability for netlink userspace to manipulate the SAD and manipulate the mark, retrieve it and get events with a defined mark. MIGRATE may be added later. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SP lookups with markJamal Hadi Salim
Allow mark to be used when doing SP lookup Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SP lookups signature with markJamal Hadi Salim
pass mark to all SP lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups with markJamal Hadi Salim
Allow mark to be added to the SA lookup Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: introduce basic mark infrastructureJamal Hadi Salim
Add basic structuring and accessors for xfrm mark Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22af_key: locking changestephen hemminger
Get rid of custom locking that was using wait queue, lock, and atomic to basically build a queued mutex. Use RCU for read side. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22packet: convert socket list to RCU (v3)stephen hemminger
Convert AF_PACKET to use RCU, eliminating one more reader/writer lock. There is no need for a real sk_del_node_init_rcu(), because sk_del_node_init is doing the equivalent thing to hlst_del_init_rcu already; but added some comments to try and make that obvious. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22seq_file: add RCU versions of new hlist/list iterators (v3)stephen hemminger
Many usages of seq_file use RCU protected lists, so non RCU iterators will not work safely. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22can:ti_hecc: Add pm hook-upSriram
Added the suspend and resume implementation in the HECC (CAN) driver. Signed-off-by: K R Baalaaji <krbaalaaji@ti.com> Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Anant Gole <anantgole@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22isdn: fix a few Kconfig imperfectionsTilman Schmidt
1. Rewrite the outdated help texts for config options ISDN and ISDN_CAPI. 2. The MISDN config option appeared between ISDN_I4L and the I4L hardware driver options; move it to a less irritating place. 3. HYSDN is not in fact an I4L driver, and needn't depend on ISDN_I4L, so move it from the I4L section to the general section. 4. ISDN_HDLC is now also used by drivers outside I4L. Move it from the I4L section to the general section, too. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part4Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22e1000: convert to use netdev_for_each_mc_addrJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22net/arm: convert to use netdev_for_each_mc_addrJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22drivers/net/typhoon.c: Use (pr|netdev)_<level> macro helpersJoe Perches
David Dillow took my suggestions and improved on them. Here is this latest version. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Remove #define ERR_PFX Remove now unused member name from struct typhoon Use pr_<level> Use netdev_<level> Coalesce long formats Remove version information Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: use netdev_alloc_skb instead of dev_alloc_skbHauke Mehrtens
The conversion in bf0dcbd929faf036f1a4f2918090344d0e249cf5 missed the new allocation in b44_rx. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-07 23:39:08 +0000