summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix endian error comparing authusers when cifsacl enabled [CIFS] Rename three structures to avoid camel case Fix extended security auth failure CIFS: Add rwpidforward mount option CIFS: Migrate to shared superblock model [CIFS] Migrate from prefixpath logic CIFS: Fix memory leak in cifs_do_mount [CIFS] When mandatory encryption on share, fail mount CIFS: Use pid saved from cifsFileInfo in writepages and set_file_size cifs: add cifs_async_writev cifs: clean up wsize negotiation and allow for larger wsize cifs: convert cifs_writepages to use async writes CIFS: Fix undefined behavior when mount fails cifs: don't call mid_q_entry->callback under the Global_MidLock (try #5) CIFS: Simplify mount code for further shared sb capability CIFS: Simplify connection structure search calls cifs: remove unused SMB2 config and mount options cifs: add ignore_pend flag to cifs_call_async cifs: make cifs_send_async take a kvec array cifs: consolidate SendReceive response checks
2011-05-27Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: Ocfs2/move_extents: Validate moving goal after the adjustment. Ocfs2/move_extents: Avoid doing division in extent moving.
2011-05-27Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] mm: add ZONE_DMA to 31-bit config again [S390] mm: add page fault retry handling [S390] mm: handle kernel caused page fault oom situations [S390] delay: implement ndelay [S390] topology,sched: fix cpu_coregroup_mask/cpu_book_mask definitions [S390] hwsampler: allow cpu hotplug [S390] uaccess: turn __access_ok() into a define [S390] irq: merge irq.c and s390_ext.c [S390] irq: fix service signal external interrupt handling [S390] pfault: always enable service signal interrupt
2011-05-27Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/fsl_rio: Error interrupt handler for sRIO on MPC85xx powerpc/fsl_rio: move machine_check handler powerpc/fsl_lbc: Add workaround for ELBC-A001 erratum
2011-05-27Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] v1.88 DM04/QQBOX Move remote to use rc_core dvb-usb-remote [media] Add missing include guard to header file [media] Inlined functions should be static [media] Remove invalid parameter description [media] cpia2: fix warning about invalid trigraph sequence [media] s5p-csis: Add missing dependency on PLAT_S5P [media] gspca/kinect: wrap gspca_debug with GSPCA_DEBUG [media] fintek-cir: new driver for Fintek LPC SuperIO CIR function [media] uvcvideo: Connect video devices to media entities [media] uvcvideo: Register subdevices for each entity [media] uvcvideo: Register a v4l2_device [media] add V4L2-PIX-FMT-SRGGB12 & friends to docbook [media] Documentation/DocBook: Rename media fops xml files [media] Media DocBook: fix validation errors [media] wl12xx: g_volatile_ctrl fix: wrong field set [media] fix kconfig dependency warning for VIDEO_TIMBERDALE [media] dm1105: GPIO handling added, I2C on GPIO added, LNB control through GPIO reworked [media] Add support for M-5MOLS 8 Mega Pixel camera ISP
2011-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (42 commits) regulator: Fix _regulator_get_voltage if get_voltage callback is NULL USB: TWL6025 allow different regulator name REGULATOR: TWL6025: add support to twl-regulator regulator: twl6030: do not write to _GRP for regulator disable regulator: twl6030: do not write to _GRP for regulator enable TPS65911: Comparator: Add comparator driver TPS65911: Add support for added GPIO lines GPIO: TPS65910: Move driver to drivers/gpio/ TPS65911: Add new irq definitions regulator: tps65911: Add new chip version MFD: TPS65910: Add support for TPS65911 device regulator: Fix off-by-one value range checking for mc13xxx_regulator_get_voltage regulator: mc13892: Fix voltage unit in test case. regulator: Remove MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros mfd: Fix off-by-one value range checking for tps65910_i2c_write regulator: Only apply voltage constraints from consumers that set them regulator: If we can't configure optimum mode we're always in the best one regulator: max8997: remove useless code regulator: Fix memory leak in max8998_pmic_probe failure path regulator: Fix desc_id for tps65023/6507x/65910 ...
2011-05-27Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
2011-05-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (coretemp) Fix section mismatch hwmon: (pmbus) Initialize sysfs attributes hwmon: (coretemp) Update comments describing the handling of HT CPUs hwmon: (coretemp) Initialize sysfs attributes
2011-05-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits) ASoC: Fix power down for widgetless per-card DAPM context case ASoC: wm1250-ev1: Define "WM1250 Output" with SND_SOC_DAPM_OUTPUT ASoC: Remove duplicate linux/delay.h inclusion. ASoC: sam9g20_wm8731: use the proper SYSCKL value ASoC: wm8731: fix wm8731_check_osc() connected condition ALSA: hda - Reorganize controller quriks with bit flags ALSA: hda - Use snd_printd() in snd_hda_parse_pin_def_config() ALSA: core: remove unused variables. ALSA: HDA: Increase MAX_HDMI_PINS ALSA: PCM - Don't check DMA time-out too shortly MAINTAINERS: add FireWire audio maintainer ALSA: usb-audio: more control quirks for M-Audio FastTrack devices ALSA: usb-audio: add new quirk type QUIRK_AUDIO_STANDARD_MIXER ALSA: usb-audio: export snd_usb_feature_unit_ctl ALSA: usb-audio: rework add_control_to_empty() ALSA: usb-audio: move assignment of chip->ctrl_intf ALSA: hda - Use model=auto for Lenovo G555 ALSA: HDA: Unify HDMI hotplug handling. ALSA: hda - Force AD1988_6STACK_DIG for Asus M3N-HT Deluxe ASoC: core - remove superfluous new line. ...
2011-05-27atm: expose ATM device index in sysfsDan Williams
It's currently exposed only through /proc which, besides requiring screen-scraping, doesn't allow userspace to distinguish between two identical ATM adapters with different ATM indexes. The ATM device index is required when using PPPoATM on a system with multiple ATM adapters. Signed-off-by: Dan Williams <dcbw@redhat.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: David Woodhouse <dwmw2@infradead.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-27Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6David S. Miller
2011-05-27ath9k: Fix AR9287 calibrationAdrian Chadd
The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27mac80211: Remove duplicate linux/slab.h include from net/mac80211/scan.cJesper Juhl
Commit 79f460ca49d8d5700756ab7071c951311c7f29cc add a duplicate linux/slab.h include to net/mac80211/scan.c - remove it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27mac80211: clear local->ps_data on disassocEliad Peller
local->ps_data wasn't cleared on disassociation, which (in some corner cases) caused reconnections to enter psm before association completed. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27wireless: Default to 'n' for 2 new added devices in Kconfig.Tao Ma
We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27iwl4965: fix 5GHz operationStanislaw Gruszka
rx_status.band is used uninitialized, what disallow to work on 5GHz . Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-27MAINTAINERS: Update eCryptfs mailing listTyler Hicks
The eCryptfs mailing list has moved from lists.launchpad.net to vger.kernel.org. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2011-05-27eCryptfs: Allow 2 scatterlist entries for encrypted filenamesTyler Hicks
The buffers allocated while encrypting and decrypting long filenames can sometimes straddle two pages. In this situation, virt_to_scatterlist() will return -ENOMEM, causing the operation to fail and the user will get scary error messages in their logs: kernel: ecryptfs_write_tag_70_packet: Internal error whilst attempting to convert filename memory to scatterlist; expected rc = 1; got rc = [-12]. block_aligned_filename_size = [272] kernel: ecryptfs_encrypt_filename: Error attempting to generate tag 70 packet; rc = [-12] kernel: ecryptfs_encrypt_and_encode_filename: Error attempting to encrypt filename; rc = [-12] kernel: ecryptfs_lookup: Error attempting to encrypt and encode filename; rc = [-12] The solution is to allow up to 2 scatterlist entries to be used. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Cc: <stable@kernel.org>
2011-05-27eCryptfs: Clear i_nlink in rmdirTyler Hicks
eCryptfs wasn't clearing the eCryptfs inode's i_nlink after a successful vfs_rmdir() on the lower directory. This resulted in the inode evict and destroy paths to be missed. https://bugs.launchpad.net/ecryptfs/+bug/723518 Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Cc: <stable@kernel.org>
2011-05-27acer-wmi: support integer return type from WMI methodsLee, Chun-Yi
Acer WMID_GUID1/2 method's return value was declared to integer type on Gateway notebook. So, add this patch for support integer return type. Reference: bko#33032 https://bugzilla.kernel.org/show_bug.cgi?id=33032 Tested on Gateway NV5909H laptop Tested-by: Filipus Klutiero <chealer@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27msi-laptop: fix section mismatch in reference from the function ↵Lee, Chun-Yi
load_scm_model_init There have section mismatch warning message shows up when building the kernel with make CONFIG_DEBUG_SECTION_MISMATCH=y. The problem is the load_scm_model_init() calls msi_laptop_input_setup() which is an __init function, but load_scm_model_init() lacks a __init annotation. This patch add __init on load_scm_model_init() to avoid warning message. Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: support to set communication device state by new wmid methodLee, Chun-Yi
Have many Acer notebooks' BIOS already support new WMID_GUID3 method. On those machines, that will be better set communication device by evaluate WMID_GUID3 method. Tested on Acer Travelmate 8572 Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: allow 64-bits return buffer from WMI methodsLee, Chun-Yi
Acer WMID_GUID1/2 method's return buffer was declared to 64-bits on some Acer notebook, but WMI method only use 32-bits in return buffer. So, add this patch for allow 64-bits return buffer. Reference: bko#34142 https://bugzilla.kernel.org/show_bug.cgi?id=34142 Tested on Acer Travelmate 5735Z-452G32Mnss Tested-by: Melchior FRANZ <melchior.franz@gmail.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: check the existence of internal 3G device when set capabilityLee, Chun-Yi
That will be better to check the existence of internal 3G device when we set threeg capability and generate killswitch for threeg. It can avoid userland access 3G rfkill but the machine doesn't have internal 3G device. Reference: bko#32862 https://bugzilla.kernel.org/show_bug.cgi?id=32862 Tested on Acer Aspire 8930G, Acer Travelmate 8572 Tested-by: Hector Martin <hector@marcansoft.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform/x86:delete two unused variablesWeiping Pan
variable handle is not used in these two functions, just delete them. Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27support wlan hotkey on Acer Travelmate 5735ZMelchior FRANZ
On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key doesn't send 0x1 as acpi event key code, but 0x3. This patch also makes the module ignore hotkey acpi events for functions that are already handled without. This avoids warning message "keyboard: can't emulate rawmode for keycode 240". Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform-x86: intel_mid_thermal: Fix memory leakAmeya Palande
Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform/x86: Fix Makefile for intel_mid_powerbtnAmeya Palande
Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform/x86: Simplify intel_mid_powerbtnAmeya Palande
This patch: 1. Removes unnecessay #defines 2. Removes 'mfld_pb_priv' data structure which results in simpler error handling and less memory allocations. Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: Delete out-of-date documentationCarlos Corbacho
The documentation file for acer-wmi is long out of date, and there's not much point in keeping it around either. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acerhdf: Clean up includesJean Delvare
* The acerhdf driver isn't an ACPI driver, so it needs not include <acpi/acpi_drivers.h>. All it uses is ec_read() and ec_write(), for which <linux/acpi.h> is sufficient. * I couldn't find any reason why <linux/fs.h> and <linux/sched.h> were included. This should avoid unneeded rebuilds of the acerhdf driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acerhdf: Drop pointless dependency on THERMAL_HWMONJean Delvare
The THERMAL_HWMON config option simply exposes the thermal zone temperature values and limits to user-space. It makes no sense for a kernel driver to depend on this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: Update MAINTAINERSCarlos Corbacho
I don't have the time or much interest these days in maintaining acer-wmi, as I don't have access to newer Acer hardware. As he's been doing most of the work these days anyway, Joey Lee has kindly agreed to take over. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Joey Lee <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27wmi: Orphan ACPI-WMI driverCarlos Corbacho
I no longer have the time to work on this, and haven't really been doing any work to this either. Time to let someone else take the reins. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27tc1100-wmi: Orphan driverCarlos Corbacho
I've never owned the hardware, this was a port of an existing driver to prove that the ACPI-WMI code was useful to more than just acer-wmi. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27acer-wmi: does not allow negative number set to initial device stateLee, Chun-Yi
The driver set module parameter value: mailled, threeg and brightness to BIOS by evaluate wmi method when driver was initialed. The default values for those parameters are -1, so, that will be better don't set negative value to BIOS. Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform/oaktrail: ACPI EC Extra driver for OaktrailYin Kangkai
This driver implements an Extra ACPI EC driver for products based on Intel Oaktrail platform. This driver does below things: 1. registers itself in the Linux backlight control in /sys/class/backlight/intel_oaktrail/ 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ for these components: wifi, bluetooth, wwan (3g), gps Signed-off-by: Yin Kangkai <kangkai.yin@linux.intel.com> [Extracted from a bigger patch by Yin Kangkai, this version leaves out some sysfs bits that probably want to be driver managed, and ACPI i2c enumeration] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27thinkpad_acpi: Convert printks to pr_<level>Joe Perches
Add pr_fmt. Removed local TPACPI_<level> #defines, convert to pr_<level>. Neaten dbg_<foo> macros. Added a few missing newlines to logging messages. Added static inline str_supported for !CONFIG_THINKPAD_ACPI_DEBUG vdbg_printk defect reported by Sedat Dilek <sedat.dilek@googlemail.com>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warningJoe Perches
Move TPACPI_HANDLE declaration into #ifdef block and neaten it a bit. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27platform-x86: intel_mid_thermal: Fix coding styleAmeya Palande
Before fixing checkpatch.pl reported 74 errors and 234 warnings Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27xo15-ebook: Use pr_<level>Joe Perches
Use the current logging styles. Remove local #define PREFIX. Add pr_fmt. Convert printk to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27wmi: Removed trailing whitespace from logging message.Joe Perches
Just neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27toshiba: Convert printks to pr_<level>Joe Perches
Add pr_fmt. Remove local MY_<foo> #defines. Convert printks to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27topstar-laptop: Convert remaining printk to pr_infoJoe Perches
To be similar to all other uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27tc1100-wmi: Add pr_fmt, use pr_<level>Joe Perches
Use the more normal logging styles. Removed now unused local logging #defines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27sony-laptop: Add and use #define pr_fmtJoe Perches
Add pr_fmt. Remove now unused #define DRV_PRX. Neaten dprintk macro. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27msi-wmi: Use pr_fmt and pr_<level>Joe Perches
Added pr_fmt. Removed now unused #define DRV_PFX Convert dprintk to pr_debug. Convert printks to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27msi-laptop: pr_<level> neateningJoe Perches
Just making it a bit more like other logging message uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27intel_pmic_gpio: Convert printks to pr_<level>Joe Perches
Add #define pr_fmt(fmt) "%s: " fmt, __func__ to prefix function name to each output message. Convert printks to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-05-27intel_menlow: Add pr_fmt and use pr_<level>Joe Perches
Add pr_fmt to prefix the logging messages. Convert printk to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>