summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-12-05iwlwifi: 5150 add support for 5150Tomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Replace ath9k_opmode with nl80211_iftypeColin McCabe
This patch kills ath9k's ath9k_opmode enum by replacing it with nl80211_iftype. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: disable AP modeJohannes Berg
iwlwifi does not support AP mode in any way. For one, it doesn't even buffer multicast/broadcast frames properly. We didn't allow zd1211rw AP mode to be enabled without this, so iwlwifi shouldn't be allowed to advertise AP mode either. It also doesn't work at all, it doesn't even answer to probe requests, I'm guessing the packet injection code was disabled again. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: fix lm87 checksum endiannessJohannes Berg
This fixes the checksum calculation for lm87 firmwares on big endian platforms, the device treats the data as an array of 32-bit little endian values so the driver needs to do that as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: "fix" 11d oopsJohannes Berg
This "fixes" the 11d oops I was seeing. This needs some more work but I cannot work on it now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945: remove obsolete irq handlingHelmut Schaa
3945 hardware does not emit the interrupts CSR_INT_BIT_RF_KILL (rfkill toggled) and CSR_INT_BIT_CT_KILL (adapter too hot). Hence this part of code can be removed since iwl3945_irq_tasklet does not handle 4965 hw at all. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: tx module cleanup.Rami Rosen
This patch removes unnecessary parameter in ieee80211_beacon_add_tim() and removes unneeded definition and assignment for bdev (instance of net_device) in ieee80211_beacon_get() and in ieee80211_get_buffered_bc() (all in tx.c). Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: fix wiphy remove if no regulatory requestJohannes Berg
Fixes the segfault I just pointed out. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: document ieee80211_tx_info.padKalle Valo
Fixes htmldocs warning: Warning(mac80211.h:379): No description found for parameter 'pad[2]' Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: per-device namesChristian Lamparter
This patch replaces the static "p54:" strings in front of most printk's with their corresponding per-device names. It was always a bit of a hassle to check which device was generating all the messages. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: refactoringChristian Lamparter
Thanks to the introduction of "changed" flags, we no longer have to do the bookkeeping of p54's firmware state for everything. Thus we can cut down redundancy code. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: include support for 2.13.24.0 USB LM87 FirmwaresChristian Lamparter
Those firmwares are probably capable of reprogramming the device's eeprom. We better support them officially, before all the accidents happen. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: utilize cryptographic acceleratorChristian Lamparter
This patch allows p54 to utilize its WEP, TKIP and CCMP accelerator. Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05p54: revamp station power save management in access point modeChristian Lamparter
This patch addresses the problem in: http://marc.info/?l=linux-wireless&m=122727674810057&w=2 Thanks to Stefan Steuerwald <salsasepp@googlemail.com> extensive iPod touch tests. We could finally squash some bugs in p54's master mode / access point implementation. Let's hope we got everything right this time and all stations from now on will wake up on TIM and receive their queued frames and go to sleep again without any hiccups. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: add sta_notify_ps callbackChristian Lamparter
This patch is necessary in order to provide a proper Access point support for p54. Unfortunately for us, there is no documented way to disable the interfering power save buffering mechanism in firmware completely. Therefore we give in and notify the driver through our new sta_notify_ps callback, so that we can update the filter state. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add a debugfs file for dumping DMA statusSujith
Debugfs file location: ath9k/<wiphy>/dma Contains values in DMA debug registers. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add initial layout for an ath9k specific debugfs mechanismSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Remove includes that are not neededSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Add ATH9K_DEBUG configuration optionSujith
Make debugging configurable, and add a module parameter to give the debug mask. Add debug.c to hold all debug specific code. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Use cleaner debug masksSujith
Remove all the useless __func__ prefixes in debug messages, and replace the DPRINTF macro with a function. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rtl8187: fix retry count passed in rtl8187_txherton
I mistakenly changed retry count passed in rtl8187_tx in previous change "rtl8187: feedback transmitted packets using tx close descriptor for 8187B". For 8187 it should represent the number of retries (retry count limit). As explained by Johannes Berg, .count represents the number of tries (not retries), and retries = tries - 1. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05wireless: clean up radiotap a bitJohannes Berg
No need to pad the header so no constant needed for that, no need to carry any version number from netbsd nor CVS IDs from them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Handle channel initialization for AP modeSujith
Hostapd now passes the HT parameters through the config() callback, use these to set the appropriate channel in AP mode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: accept empty strings for hidden SSIDsFabio Rossi
Some access points (e.g. Sitecom WL-174) use an empty string as hidden SSID. Signed-off-by: Fabio Rossi <rossi.f@inwind.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWMODE/SIOCSIWMODEJohannes Berg
further reducing wext code in mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05cfg80211: handle SIOCGIWNAMEJohannes Berg
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: enable combined michael mic in key cacheBob Copeland
For mac revisions >= "Griffin," the hardware allows the mic tx and rx authenticator keys to share the same cache line, whereas earlier hardware can only store the rx. Enable the combined mic on hardware that supports it. Changes to ath5k.h Changes-licensed-under: 3-Clause-BSD Changes to attach.c, pcu.c, reg.h Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: clean up ath5k_hw_set_keyBob Copeland
Status: O With the addition of TKIP (and soon CCMP), key->alg is a more useful guide to key type than the key length. This patch cleans up key type assignment in ath5k_hw_set_key by extracting it into its own function. It also replaces the separate memcpy() calls for extracting key material into the hardware format with a loop that works regardless of key size. Finally, the patch removes support for WEP-128 since it is a non-standard key length that mac80211 also doesn't use. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath5k: preserve higher order bits when setting mac addressBob Copeland
In some cases we would like to set the mac address without changing the operating mode. However, Atheros cards store PCU data in the high 16 bits of the mac address register. Change ath5k_hw_set_lladdr() to not clobber the PCU settings. Changes-licensed-under: ISC Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: remove uses of __constant_{endian} helpersHarvey Harrison
The base versions handle constant folding just fine. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05nl80211: relicense nl80211.h under the ISCLuis R. Rodriguez
We have a few BSD/ISC licensed userspace applications which include nl80211.h from the kernel. To avoid legal ambiguity for usage of the header file in these projects we rather simply relicense the header file under the ISC. We've received consent from all contributors to it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Acked-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Colin McCabe <colin@cozybit.com> Acked-by: Javier Cardona <javier@cozybit.com> Cc: johannes@sipsolutions.net Cc: altape@eden.rutgers.edu Cc: luisca@cozybit.com Cc: mb@bu3sch.de Cc: jouni.malinen@atheros.com Cc: colin@cozybit.com Cc: javier@cozybit.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05nl80211: Add frequency configuration (including HT40)Jouni Malinen
This patch adds new NL80211_CMD_SET_WIPHY attributes NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow userspace to set the operating channel (e.g., hostapd for AP mode). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: only transition STAs ps->wake on data framesJohannes Berg
When a station goes to PS mode to scan, it will then send probe requests without the PS bit set. mac80211 will take that as indication that the station woke up, but it didn't. This patch changes mac80211 to only consider doze->wake transitions on data frames to to fix that issue. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: properly initialize calibration command headerTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: disassociate prior to unlinking AP/stationTomas Winkler
This patch reorders calls during disassociation in ieee80211_set_disassoc function. Since sta_info_unlink calls sta_notify(REMOVE) it will remove the station representing AP from the driver before it has disassociated from it using bss_info_changed callback. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05mac80211: deauth when interface is marked downJohn W. Linville
It seems like proper etiquette to let other stations know when we are going down in either STA or IBSS mode. This also notifies userland, so wpa_supplicant doesn't get confused. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05hostap: select required crypto bits in KconfigJohn W. Linville
This is fallout from moving the crypto stuff to the new lib80211 component. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-04xfrm: Accept ESP packets regardless of UDP encapsulation modeMartin Willi
From: Martin Willi <martin@strongswan.org> An IPsec node speaking IKEv2 MUST accept incoming UDP encapsulated ESP packets, even if no NAT situation is detected. This is important if MOBIKE is in use. Some implementation keep the encapsulation mode if they move out of a NAT situation. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sgi-xp: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). [ Kill unnecessary casts, noticed by Ilpo -DaveM ] Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04um: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04xtensa: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04simeth: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net/ipv6/ip6mr.c: Use kmem_cache_zalloc, remove memsetJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03if_usb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03smc91x: remove isa stuff from smc91x driverLuotao Fu
ISA support in smc91x is incomplete. I doubt there're any smc91x isa card. This driver is greatly used on arm pxa platforms. Hence we remove the isa stuff from smc91x driver. Signed-off-by: Luotao Fu <lfu@pengutronix.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net: /proc/net/ip_mr_cache, display Iif as a signed shortBenjamin Thery
Today, iproute2 fails to show multicast forwarding unresolved cache entries while scanning /proc/net/ip_mr_cache. Indeed, it expects to see -1 in 'Iif' column to identify unresolved entries but the kernel outputs 65535. It's a signed/unsigned issue: 'Iif', the source interface, is retrieved from member mfc_parent in struct mfc_cache. mfc_parent is a vifi_t: unsigned short, but is displayed in ipmr_mfc_seq_show() as "%-3d", signed integer. In unresolevd entries, the 65535 value (0xFFFF) comes from this define: #define ALL_VIFS ((vifi_t)(-1)) That may explains why the guy who added support for this in iproute2 thought a -1 should be expected. I don't know if this must be fixed in kernel or in iproute2. Who is right? What is the correct API? How was it designed originally? I let you decide if it should goes in the kernel or be fixed in iproute2. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03net: fix /proc/net/ip_mr_cache display - V2Benjamin Thery
/proc/net/ip_mr_cache and /proc/net/ip6_mr_cache displays garbage when showing unresolved mfc_cache entries. [root@qemu tests]# cat /proc/net/ip_mr_cache Group Origin Iif Pkts Bytes Wrong Oifs 014C00EF 010014AC 1 10 10050 0 2:1 3:1 024C00EF 010014AC 65535 514 2 -559067475 The first line is correct. It is a resolved cache entry, 10 packets used it... The second line represents an unresolved entry, and the columns Pkts(4th), Bytes(5th) and Wrong(6th) just show garbage. In struct mfc_cache, there's an union to store data for resolved and unresolved cases. And what ipmr_mfc_seq_show() is printing in these columns for the unresolved entries is some bytes from mfc_cache.mfc_un.res. Bad. (eg. In our case -559067475 is in fact 0xdead4ead which is the spinlock magic from mfc_cache.mfc_un.unres.unresolved.lock.magic). This patch replaces the garbage data written in these columns for the unresolved entries by '0' (zeros) which is more correct. This change doesn't break the ABI. Also, mfc->mfc_un.res.pkt, mfc->mfc_un.res.bytes, mfc->mfc_un.res.wrong_if are unsigned long. It applies on top of net-next-2.6. The patch for net-2.6 is slightly different because of the NIP6_FMT to %pI6 conversion that was made in the seq_printf. Changelog: ========== V2: * Instead of breaking the ABI by suppressing the columns that have no meaning for unresolved entries, fill them with 0 values. Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03netdev: remove pathetic compile-command linesAlexey Dobriyan
-m486, -O6 are partircularly amusing. Remove some other useless lines near as well. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03atm: 32-bit ioctl compatibilityDavid Woodhouse
We lack compat ioctl support through most of the ATM code. This patch deals with most of it, and I can now at least use BR2684 and PPPoATM with 32-bit userspace. I haven't added a .compat_ioctl method to struct atm_ioctl, because AFAICT none of the current users need any conversion -- so we can just call the ->ioctl() method in every case. I looked at br2684, clip, lec, mpc, pppoatm and atmtcp. In svc_compat_ioctl() the only mangling which is needed is to change COMPAT_ATM_ADDPARTY to ATM_ADDPARTY. Although it's defined as _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) it doesn't actually _take_ a struct atm_iobuf as an argument -- it takes a struct sockaddr_atmsvc, which _is_ the same between 32-bit and 64-bit code, so doesn't need conversion. Almost all of vcc_ioctl() would have been identical, so I converted that into a core do_vcc_ioctl() function with an 'int compat' argument. I've done the same with atm_dev_ioctl(), where there _are_ a few differences, but still it's relatively contained and there would otherwise have been a lot of duplication. I haven't done any of the actual device-specific ioctls, although I've added a compat_ioctl method to struct atmdev_ops. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03ne-h8300: convert to net_device_opsStephen Hemminger
Another device using 8390 library that needs converting. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>