summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-12-06ALSA: hda: Use position_fix=1 for Acer Aspire 5538 to enable capture on ↵Daniel T Chen
internal mic BugLink: https://launchpad.net/bugs/685161 The reporter of the bug states that he must use position_fix=1 to enable capture for the internal microphone, so set it for his machine's PCI SSID. Verified using 2.6.35 and the 2010-12-04 alsa-driver build. Reported-and-tested-by: Ralph Wabel <rwabel@gmx.net> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-04ALSA: hda - Enable jack sense for Thinkpad Edge 13Manoj Iyer
Added a quirk to cxt5066_cfg_tbl to enable jack sense for ThinkPad Edge 13. Reference: http://launchpad.net/bugs/685015 Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-03ALSA: hda - Fix ThinkPad T410[s] docking station line-outJohn Baboval
On the docking station for the Lenovo T410 and T410s, the line-out doesn't work. The trouble seems to be that it generates a plug event, but then doesn't report that the jack is connected. So automute mutes the jack when you plug something into it. The following patch (next message) fixes it. Signed-off-by: John Baboval <john.baboval at virtualcomputer.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-03ALSA: hda: Use model=lg quirk for LG P1 Express to enable playback and captureDaniel T Chen
BugLink: https://launchpad.net/bugs/595482 The original reporter states that audible playback from the internal speaker is inaudible despite the hardware being properly detected. To work around this symptom, he uses the model=lg quirk to properly enable both playback, capture, and jack sense. Another user corroborates this workaround on separate hardware. Add this PCI SSID to the quirk table to enable it for further LG P1 Expresses. Reported-and-tested-by: Philip Peitsch <philip.peitsch@gmail.com> Tested-by: nikhov Cc: <stable@kernel.org> [2.6.32+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-02ALSA: hda: Use "alienware" model quirk for another SSIDDaniel T Chen
BugLink: https://launchpad.net/bugs/683695 The original reporter states that headphone jacks do not appear to work. Upon inspecting his codec dump, and upon further testing, it is confirmed that the "alienware" model quirk is correct. Reported-and-tested-by: Cody Thierauf Cc: <stable@kernel.org> [2.6.32+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-30ALSA: Fix SNDCTL_DSP_RESET ioctl for OSS emulationTakashi Iwai
In OSS emulation, SNDCTL_DSP_RESET ioctl needs the reset of the internal buffer state in addition to drop of the running streams. Otherwise the succeeding access becomes inconsistent. Tested-by: Amit Nagal <helloin.amit@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-29ALSA: hda: Use BIOS auto-parsing instead of existing model quirk for MEDION MD2Daniel T Chen
BugLink: https://launchpad.net/bugs/682199 A 2.6.35 (Ubuntu Maverick) user, burningphantom1, reported a regression in audio: playback was inaudible through both speakers and headphones. In commit 272a527c04 of sound-2.6.git, a new model was added with this machine's PCI SSID. Fortunately, it is now sufficient to use the auto model for BIOS auto-parsing instead of the existing quirk. Playback, capture, and jack sense were verified working for both 2.6.35 and the alsa-driver snapshot from 2010-11-27 when model=auto is used. Reported-and-tested-by: burningphantom1 Cc: <stable@kernel.org> [2.6.35+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-26ALSA: hda - Use ALC_INIT_DEFAULT for really default initializationTakashi Iwai
When SKU assid gives no valid bits for 0x38, the driver didn't take any action, so far. This resulted in the missing initialization for external amps, etc, thus the silent output in the end. Especially users hit this problem on ALC888 newly since 2.6.35, where the driver doesn't force to use ALC_INIT_DEFAULT any more. This patch sets the default initialization scheme to use ALC_INIT_DEFAULT when no valid bits are set for SKU assid. Reference: https://bugzilla.redhat.com/show_bug.cgi?id=657388 Reported-and-tested-by: Kyle McMartin <kyle@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-25ALSA: hda - Fix ALC660-VD/ALC861-VD capture/playback mixersHerton Ronaldo Krzesinski
The mixer nids passed to alc_auto_create_input_ctls are wrong: 0x15 is a pin, and 0x09 is the ADC on both ALC660-VD/ALC861-VD. Thus with current code, input playback volume/switches and input source mixer controls are not created, and recording doesn't work. Select correct mixers, 0x0b (input playback mixer) and 0x22 (capture source mixer). Reference: https://qa.mandriva.com/show_bug.cgi?id=61159 Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24ALSA: HDA: Add an extra DAC for Realtek ALC887-VDDavid Henningsson
The patch enables ALC887-VD to use the DAC at nid 0x26, which makes it possible to use this DAC for e g Headphone volume. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24ALSA: hda - Fix Acer 7730G supportDenis Kuplyakov
Fixes automatic EAPD configuration on Acer 7730G laptop. Signed-off-by: Denis Kuplyakov <dener.kup@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (41 commits) ALSA: hda - Identify more variants for ALC269 ALSA: hda - Fix wrong ALC269 variant check ALSA: hda - Enable jack sense for Thinkpad Edge 11 ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same mux on IDT/STAC" ALSA: hda - Fixed ALC887-VD initial error ALSA: atmel - Fix the return value in error path ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52J ALSA: snd-atmel-abdac: test wrong variable ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timer ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixup ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdata ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolons ALSA: sound/ppc: Use printf extension %pR for struct resource ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone controls ASoC: uda134x - set reg_cache_default to uda134x_reg ASoC: Add support for MAX98089 CODEC ASoC: davinci: fixes for multi-component ASoC: Fix register cache setup WM8994 for multi-component ASoC: Fix dapm_seq_compare() for multi-component ASoC: RX1950: Fix hw_params function ...
2010-11-24Merge branch 'upstream/for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits) xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable Revert "xen/privcmd: create address space to allow writable mmaps" xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: implement XENMEM_machphys_mapping xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier ...
2010-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: of/phylib: Use device tree properties to initialize Marvell PHYs. phylib: Add support for Marvell 88E1149R devices. phylib: Use common page register definition for Marvell PHYs. qlge: Fix incorrect usage of module parameters and netdev msg level ipv6: fix missing in6_ifa_put in addrconf SuperH IrDA: correct Baud rate error correction atl1c: Fix hardware type check for enabling OTP CLK net: allow GFP_HIGHMEM in __vmalloc() bonding: change list contact to netdev@vger.kernel.org e1000: fix screaming IRQ
2010-11-24Merge branch 'usb-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: EHCI: fix obscure race in ehci_endpoint_disable USB: gadget: AT91: fix typo in atmel_usba_udc driver USB: isp1362-hcd - fix section mismatch warning USB: EHCI: AMD periodic frame list table quirk USB: OTG: langwell_otg: fix up some sysfs attribute permissions USB: misc: usbsevseg: fix up some sysfs attribute permissions USB: misc: usbled: fix up some sysfs attribute permissions USB: misc: trancevibrator: fix up a sysfs attribute permission USB: misc: cypress_cy7c63: fix up some sysfs attribute permissions USB: storage: sierra_ms: fix sysfs file attribute USB: ehci: fix debugfs 'lpm' permissions USB: atm: ueagle-atm: fix up some permissions on the sysfs files xhci: Fix command ring replay after resume. xHCI: fix wMaxPacketSize mask xHCI: release spinlock when setup interrupt xhci: Remove excessive printks with shared IRQs.
2010-11-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-11-23Merge branch 'for-2.6.37' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2010-11-23ALSA: hda - Identify more variants for ALC269Kailang Yang
Give more correct chip names for ALC269-variant codecs. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-23ALSA: hda - Fix wrong ALC269 variant checkKailang Yang
The refactoring commit d433a67831ab2c470cc53a3ff9b60f656767be15 ALSA: hda - Optimize the check of ALC269 codec variants introduced a wrong check for ALC269-vb type. This patch corrects it. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-23ALSA: hda - Enable jack sense for Thinkpad Edge 11Manoj Iyer
Add a quirk entry for Thinkpad Edge 11 as well as other TP Edge models. Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-23ALSA: Revert "ALSA: hda - Fix switching between dmic and mic using the same ↵Takashi Iwai
mux on IDT/STAC" This reverts commit f41cc2a85d52ac6971299922084ac5ac59dc339d. The patch broke the digital mic pin handling wrongly. Reference: bko#23162 https://bugzilla.kernel.org/show_bug.cgi?id=23162 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22Merge branches 'upstream/core', 'upstream/xenfs' and 'upstream/evtchn' into ↵Jeremy Fitzhardinge
upstream/for-linus * upstream/core: xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs. xen: set IO permission early (before early_cpu_init()) xen: re-enable boot-time ballooning xen/balloon: make sure we only include remaining extra ram xen/balloon: the balloon_lock is useless xen: add extra pages to balloon xen/events: use locked set|clear_bit() for cpu_evtchn_mask xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restore xen: implement XENMEM_machphys_mapping * upstream/xenfs: Revert "xen/privcmd: create address space to allow writable mmaps" xen/xenfs: update xenfs_mount for new prototype xen: fix header export to userspace xen: set vma flag VM_PFNMAP in the privcmd mmap file_op xen: xenfs: privcmd: check put_user() return code * upstream/evtchn: xen: make evtchn's name less generic xen/evtchn: the evtchn device is non-seekable xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier xen/evtchn: ports start enabled xen/evtchn: dynamically allocate port_user array xen/evtchn: track enabled state for each port
2010-11-22xen/events: Use PIRQ instead of GSI value when unmapping MSI/MSI-X irqs.Konrad Rzeszutek Wilk
When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we need to provide the PIRQ and the vector value. What we did instead was to provide the GSI (which was zero) and the vector value, and we got these unhappy error messages: (XEN) irq.c:1575: dom0: pirq 0 not mapped [ 7.733415] unmap irq failed -22 This patches fixes this and we use the PIRQ value instead of the GSI value. CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-22xen: set IO permission early (before early_cpu_init())Konrad Rzeszutek Wilk
This patch is based off "xen dom0: Set up basic IO permissions for dom0." by Juan Quintela <quintela@redhat.com>. On AMD machines when we boot the kernel as Domain 0 we get this nasty: mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) traps.c:475:d0 Unhandled general protection fault fault/trap [#13] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1-101116 x86_64 debug=y Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff8130271b>] (XEN) RFLAGS: 0000000000000282 EM: 1 CONTEXT: pv guest (XEN) rax: 000000008000c068 rbx: ffffffff8186c680 rcx: 0000000000000068 (XEN) rdx: 0000000000000cf8 rsi: 000000000000c000 rdi: 0000000000000000 (XEN) rbp: ffffffff81801e98 rsp: ffffffff81801e50 r8: ffffffff81801eac (XEN) r9: ffffffff81801ea8 r10: ffffffff81801eb4 r11: 00000000ffffffff (XEN) r12: ffffffff8186c694 r13: ffffffff81801f90 r14: ffffffffffffffff (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000221803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801e50: RIP points to read_pci_config() function. The issue is that we don't set IO permissions for the Linux kernel early enough. The call sequence used to be: xen_start_kernel() x86_init.oem.arch_setup = xen_setup_arch; setup_arch: - early_cpu_init - early_init_amd - read_pci_config - x86_init.oem.arch_setup [ xen_arch_setup ] - set IO permissions. We need to set the IO permissions earlier on, which this patch does. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-22of/phylib: Use device tree properties to initialize Marvell PHYs.David Daney
Some aspects of PHY initialization are board dependent, things like indicator LED connections and some clocking modes cannot be determined by probing. The dev_flags element of struct phy_device can be used to control these things if an appropriate value can be passed from the Ethernet driver. We run into problems however if the PHY connections are specified by the device tree. There is no way for the Ethernet driver to know what flags it should pass. If we are using the device tree, the struct phy_device will be populated with the device tree node corresponding to the PHY, and we can extract extra configuration information from there. The next question is what should the format of that information be? It is highly device specific, and the device tree representation should not be tied to any arbitrary kernel defined constants. A straight forward representation is just to specify the exact bits that should be set using the "marvell,reg-init" property: phy5: ethernet-phy@5 { reg = <5>; compatible = "marvell,88e1149r"; marvell,reg-init = /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */ <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */ /* mix %:0, led[0123]:drive low off hiZ */ <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */ /* default blink periods. */ <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */ /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */ <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */ }; phy6: ethernet-phy@6 { reg = <6>; compatible = "marvell,88e1118"; marvell,reg-init = /* Fix rx and tx clock transition timing */ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ /* Adjust LED drive. */ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ /* irq, blink-activity, blink-link */ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ }; The Marvell PHYs have a page select register at register 22 (0x16), we can specify any register by its page and register number. These are the first and second word. The third word contains a mask to be ANDed with the existing register value, and the fourth word is ORed with the result to yield the new register value. The new marvell_of_reg_init function leaves the page select register unchanged, so a call to it can be dropped into the .config_init functions without unduly affecting the state of the PHY. If CONFIG_OF_MDIO is not set, there is no of_node, or no "marvell,reg-init" property, the PHY initialization is unchanged. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Cyril Chemparathy <cyril@ti.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Add support for Marvell 88E1149R devices.David Daney
The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY. The .config_aneg function can be shared with 88E1118, but it needs its own .config_init. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22phylib: Use common page register definition for Marvell PHYs.David Daney
The definition of the Marvell PHY page register is not specific to 88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it throughout. Suggested-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Cyril Chemparathy <cyril@ti.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22qlge: Fix incorrect usage of module parameters and netdev msg levelSonny Rao
Driver appears to be mistaking the permission field with default value in the case of debug and qlge_irq_type. Driver is also passing debug as a bitmask into netif_msg_init() which wants a number of bits. Ron Mercer suggests we should change this to pass in -1 so the defaults get used instead, which makes the default much less verbose. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22ipv6: fix missing in6_ifa_put in addrconfJohn Fastabend
Fix ref count bug introduced by commit 2de795707294972f6c34bae9de713e502c431296 Author: Lorenzo Colitti <lorenzo@google.com> Date: Wed Oct 27 18:16:49 2010 +0000 ipv6: addrconf: don't remove address state on ifdown if the address is being kept Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr refcnt correctly with in6_ifa_put(). Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22ALSA: hda - Fixed ALC887-VD initial errorKailang Yang
ALC887-VD is like ALC888-VD. It can not be initialized as ALC882. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: atmel - Fix the return value in error pathTakashi Iwai
In the commit c0763e687d0283d0db507813ca4462aa4073c5b5 ALSA: snd-atmel-abdac: test wrong variable the return value via PTR_ERR() had to be fixed as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: hda: Use hp-laptop quirk to enable headphones automute for Asus A52JDaniel T Chen
BugLink: https://launchpad.net/bugs/677652 The original reporter states that, in 2.6.35, headphones do not appear to work, nor does inserting them mute the A52J's onboard speakers. Upon inspecting the codec dump, it appears that the newly committed hp-laptop quirk will suffice to enable this basic functionality. Testing was done with an alsa-driver build from 2010-11-21. Reported-and-tested-by: Joan Creus Cc: <stable@kernel.org> [2.6.35+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: snd-atmel-abdac: test wrong variableVasiliy Kulikov
After clk_get() pclk is checked second time instead of sample_clk check. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: azt3328: period bug fix (for PA), add missing ACK on stop timerAndreas Mohr
. Fix PulseAudio "ALSA driver bug" issue (if we have two alternated areas within a 64k DMA buffer, then max period size should obviously be 32k only). Back references: http://pulseaudio.org/wiki/AlsaIssues http://fedoraproject.org/wiki/Features/GlitchFreeAudio . In stop timer function, need to supply ACK in the timer control byte. . Minor log output correction When I did my first PA testing recently, the period size bug resulted in quite precisely observeable half-period-based playback distortion. PA-based operation is quite a bit more underrun-prone (despite its zero-copy optimizations etc.) than raw ALSA with this rather spartan sound hardware implementation on my puny Athlon. Note that even with this patch, azt3328 still doesn't work for both cases yet, PA tsched=0 and tsched (on tsched=0 it will playback tiny fragments of periods, leading to tiny stuttering sounds with some pauses in between, whereas with timer-scheduled operation playback works fine - minus some quite increased underrun trouble on PA vs. ALSA, that is). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: hda: Add Samsung R720 SSID for subwoofer pin fixupDaniel T Chen
BugLink: https://launchpad.net/bugs/677830 The original reporter states that the subwoofer does not mute when inserting headphones. We need an entry for his machine's SSID in the subwoofer pin fixup list, so add it there (verified using hda_analyzer). Reported-and-tested-by: i-NoD Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: sound/pci/asihpi/hpioctl.c: Remove unnecessary casts of pci_get_drvdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: sound/core/pcm_lib.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: sound/ppc: Use printf extension %pR for struct resourceJoe Perches
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-22ALSA: ac97: Apply quirk for Dell Latitude D610 binding Master and Headphone ↵Daniel T Chen
controls BugLink: https://launchpad.net/bugs/669279 The original reporter states: "The Master mixer does not change the volume from the headphone output (which is affected by the headphone mixer). Instead it only seems to control the on-board speaker volume. This confuses PulseAudio greatly as the Master channel is merged into the volume mix." Fix this symptom by applying the hp_only quirk for the reporter's SSID. The fix is applicable to all stable kernels. Reported-and-tested-by: Ben Gamari <bgamari@gmail.com> Cc: <stable@kernel.org> [2.6.32+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-21Linux 2.6.37-rc3v2.6.37-rc3Linus Torvalds
2010-11-21SuperH IrDA: correct Baud rate error correctionNicolas Kaiser
It looks to me as if the second value of rate_err_array is intended to be a decimal 625. However, with a leading 0 it becomes an octal constant, and as such evaluates to a decimal 405. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21atl1c: Fix hardware type check for enabling OTP CLKBen Hutchings
Commit 496c185c9495629ef1c65387cb2594578393cfe0 "atl1c: Add support for Atheros AR8152 and AR8152" added the condition: if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) for enabling OTP CLK, and the condition: if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) for disabling OTP CLK. Since the two previously defined hardware types are athr_l1c and athr_l2c, the latter condition appears to be the correct one. Change the former to match. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21net: allow GFP_HIGHMEM in __vmalloc()Eric Dumazet
We forgot to use __GFP_HIGHMEM in several __vmalloc() calls. In ceph, add the missing flag. In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is cleaner and allows using HIGHMEM pages as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21bonding: change list contact to netdev@vger.kernel.orgSimon Horman
bonding-devel@lists.sourceforge.net seems only receive spam and discussion seems to already occur on netdev@vger.kernel.org. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21e1000: fix screaming IRQAnupam Chanda
VMWare reports that the e1000 driver has a bug when bringing down the interface, such that interrupts are not disabled in the hardware but the driver stops reporting that it consumed the interrupt. The fix is to set the driver's "down" flag later in the routine, after all the timers and such have exited, preventing the interrupt handler from being called and exiting early without handling the interrupt. CC: Anupam Chanda <anupamc@vmware.com> CC: stable kernel <stable@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19xen: re-enable boot-time ballooningJeremy Fitzhardinge
Now that the balloon driver doesn't stumble over non-RAM pages, we can enable the extra space for ballooning. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19xen/balloon: make sure we only include remaining extra ramJeremy Fitzhardinge
If the user specifies mem= on the kernel command line, some or all of the extra memory E820 region may be clipped away, so make sure we don't try to add more extra memory than exists in E820. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19xen/balloon: the balloon_lock is uselessJeremy Fitzhardinge
The balloon_lock is useless, since it protects nothing against nothing. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19xen: add extra pages to balloonJeremy Fitzhardinge
Add extra pages in the pseudo-physical address space to the balloon so we can extend into them later. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard fs: Do not dispatch FITRIM through separate super_operation ext4: ext4_fill_super shouldn't return 0 on corruption jbd2: fix /proc/fs/jbd2/<dev> when using an external journal ext4: missing unlock in ext4_clear_request_list() ext4: fix setting random pages PageUptodate
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 04:56:32 +0000