summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-08-18net: netdev-features.txt update to Documentation/networking/00-INDEXWillem de Bruijn
Update netdev-features.txt entry in 00-INDEX to incorporate feedback by Michał Mirosław. v2: restored tabs that were inadvertently changed to spaces in v1. sorry for the error. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18vlan: reset headers on accel emulation pathJiri Pirko
It's after all necessary to do reset headers here. The reason is we cannot depend that it gets reseted in __netif_receive_skb once skb is reinjected. For incoming vlanids without vlan_dev, vlan_do_receive() returns false with skb != NULL and __netif_reveive_skb continues, skb is not reinjected. This might be good material for 3.0-stable as well Reported-by: Mike Auty <mike.auty@gmail.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18drivers/ata/sata_dwc_460ex.c: add missing kfreeJulia Lawall
Currently, error handling code in this function calls the function sata_dwc_port_stop, but this function has essentially no effect if hsdevp has not been stored in ap, which is the case throughout this function. The only effect is to print a debugging message including ap->print_id. The code is rewritten to not call sata_dwc_port_stop, but instead to jump to a local label that prints the original error message and the print_id information. In the case where hsdevp has been already allocated (but not yet stored in ap), this value is freed as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18ata: Add iMX pata supportArnaud Patard (Rtp)
Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18pata_via: disable ATAPI DMA on AVERATEC 3200Tejun Heo
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA, which often leads to random kernel oops. The cause of the problem is not well understood yet and only small subset of machines using the controller seem affected. Blacklist ATAPI DMA on the machine. Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426 Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18[libata] sata_sil: fix used-uninit warningJeff Garzik
Init 'serror' to silence the following warning: drivers/ata/sata_sil.c: In function ‘sil_interrupt’: drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in this function [-Wuninitialized] This is not a 'can never happen' but is nonetheless extremely unlikely. The easiest and cleanest warning fix is simply to init the var, rather than worry about marking the var uninit-ok. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: set i_size properly when fallocating and we already btrfs: unlock on error in btrfs_file_llseek() btrfs: btrfs_permission's RO check shouldn't apply to device nodes Btrfs: truncate pages from clone ioctl target range Btrfs: fix uninitialized sync_pending Btrfs: fix wrong free space information btrfs: memory leak in btrfs_add_inode_defrag() Btrfs: use plain page_address() in header fields setget functions Btrfs: forced readonly when btrfs_drop_snapshot() fails Btrfs: check if there is enough space for balancing smarter Btrfs: fix a bug of balance on full multi-disk partitions Btrfs: fix an oops of log replay Btrfs: detect wether a device supports discard Btrfs: force unplugs when switching from high to regular priority bios
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: update cifs version to 1.75 [CIFS] possible memory corruption on mount cifs: demote cERROR in build_path_from_dentry to cFYI
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Support iSCSI PDU padding IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long) IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: fat16 support maximum 4GB file/vol size as WinXP or 7. fat: fix utf8 iocharset warning message fat: fix build warning
2011-08-18irqdesc: fix new kernel-doc warningRandy Dunlap
Fix kernel-doc warning in irqdesc.c: Warning(kernel/irq/irqdesc.c:353): No description found for parameter 'owner' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18i7core_edac: fixed typo in error count calculationMathias Krause
Based on a patch from the PaX Team, found during a clang analysis pass. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: PaX Team <pageexec@freemail.hu> Cc: stable@kernel.org [v2.6.35+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
2011-08-18update cifs version to 1.75Steve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-08-18[CIFS] possible memory corruption on mountSteve French
CIFS cleanup_volume_info_contents() looks like having a memory corruption problem. When UNCip is set to "&vol->UNC[2]" in cifs_parse_mount_options(), it should not be kfree()-ed in cleanup_volume_info_contents(). Introduced in commit b946845a9dc523c759cae2b6a0f6827486c3221a Signed-off-by: J.R. Okajima <hooanon05@yahoo.co.jp> Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-08-19ASoC: omap: Fix build errors in ams-deltaJarkko Nikula
Fix "error: too few arguments to function 'ams_delta_set_bias_level'" build errors in ams-delta.c that were introduced after commit d4c6005 ("ASoC: Add context parameter to card DAPM callbacks") by adding dapm context to ams_delta_set_bias_level calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-18Merge branch 'btrfs-3.0' into for-linusChris Mason
2011-08-18Btrfs: set i_size properly when fallocating and we alreadyJosef Bacik
xfstests exposed a problem with preallocate when it fallocates a range that already has an extent. We don't set the new i_size properly because we see that we already have an extent. This isn't right and we should update i_size if the space already exists. With this patch we now pass xfstests 075. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18btrfs: unlock on error in btrfs_file_llseek()Dan Carpenter
There were some unlocks on error missing in a recent patch to btrfs_file_llseek(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18btrfs: btrfs_permission's RO check shouldn't apply to device nodesJeff Mahoney
This patch tightens the read-only access checks in btrfs_permission to match the constraints in inode_permission. Currently, even though the device node itself will be unmodified, read-write access to device nodes is denied to when the device node resides on a read-only subvolume or a is a file that has been marked read-only by the btrfs conversion utility. With this patch applied, the check only affects regular files, directories, and symlinks. It also restructures the code a bit so that we don't duplicate the MAY_WRITE check for both tests. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-18ALSA: hda - Add "PCM" volume to vmaster slave listTakashi Iwai
The new parser may use "PCM" volume, but it was missing the vmaster slave list, thus "Master" volume didn't control it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=41342 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-18perf tools: Add group event scheduling option to perf record/statLin Ming
Group event scheduling command line option is missing in perf record/stat. Add it to perf record/stat, which is same as in perf top. Reported-by: Andi Kleen <andi@firstfloor.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1313577727.2754.5.camel@hp6530s Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18MAINTAINERS: Fix list of perf events source filesGeunsik Lim
Recent changes made kernel/perf_event.c be split and moved to kernel/events/. Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Kosina <trivial@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1313653497-27263-1-git-send-email-leemgs1@gmail.com Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf tools: Fix build against newer glibcJosh Boyer
Upstream glibc commit 295e904 added a definition for __attribute_const__ to cdefs.h. This causes the following error when building perf: util/include/linux/compiler.h:8:0: error: "__attribute_const__" redefined [-Werror] /usr/include/sys/cdefs.h:226:0: note: this is the location of the previous definition Wrap __attribute_const__ in #ifndef as we do for __always_inline. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110818113720.GL2227@zod.bos.redhat.com Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf tools: Fix error handling of unknown eventsStephane Eranian
There was a problem with the parse_events() code not printing the correct event name when an event was unknown and starting with an 'r'. The source of the problem was the way raw notation was parsed. Without the patch: $ perf stat -e retired_foo invalid event modifier: 'tired_foo' With the patch: $ perf stat -e retired_foo invalid or unsupported event: 'retired_foo' This also covers the case where the name of the event was not printed at all when perf was linked with libpfm4. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110723021043.GA20178@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf evlist: Fix missing event name init for default eventStephane Eranian
When no event is given to perf record, perf top, a default event is initialized (cycles). However, perf_evlist__add_default() was not setting the symbolic name for the event. Perf top worked simply because it was reconstructing the name from the event code. But it should not have to do this. This patch initializes the evsel->name field properly. This second version improves the code flow on the non error path. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110607161936.GA8163@quad Signed-off-by: Stephane Eranian <eranian@google.com> [committer note: Use perf_evsel__delete() instead of plain free()] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-18perf list: Fix exit valueStephane Eranian
This patch fixes an issue with the exit value of perf list: $ perf list; echo $? 129 perf list returns an error exit code even though there is no error. There was a stray exit(129) in print_events(). This patch removes this exit(). $ perf list; echo $? 0 $ perf list hw sw cpu-cycles OR cycles [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] alignment-faults [Software event] emulation-faults [Software event] $ echo $? 0 Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110523123917.GA31060@quad Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-08-17forcedeth: call vlan_mode only if hw supports vlansJiri Pirko
If hw does not support vlans, dont call nv_vlan_mode because it has no point. I believe that this should fix issues on older non-vlan supportive chips (like Ingo has). Reported-ty: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17via-velocity: remove non-tagged packet filteringJiri Pirko
It's undesired to filter untagged packets at any time. So simply remove this. Reported-by: Stephan Bärwolf <stephan.baerwolf@tu-ilmenau.de> Tested-by: Stephan Bärwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17bonding:reset backup and inactive flag of slavePeter Pan(潘卫平)
Eduard Sinelnikov (eduard.sinelnikov@gmail.com) found that if we change bonding mode from active backup to round robin, some slaves are still keeping "backup", and won't transmit packets. As Jay Vosburgh(fubar@us.ibm.com) pointed out that we can work around that by removing the bond_is_active_slave() check, because the "backup" flag is only meaningful for active backup mode. But if we just simply ignore the bond_is_active_slave() check, the transmission will work fine, but we can't maintain the correct value of "backup" flag for each slaves, though it is meaningless for other mode than active backup. I'd like to reset "backup" and "inactive" flag in bond_open, thus we can keep the correct value of them. As for bond_is_active_slave(), I'd like to prepare another patch to handle it. V2: Use C style comment. Move read_lock(&bond->curr_slave_lock). Replace restore with reset, for active backup mode, it means "restore", but for other modes, it means "reset". Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net_sched: fix port mirror/redirect stats reportingJamal Hadi Salim
When a redirected or mirrored packet is dropped by the target device we need to record statistics. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17befs: Validate length of long symbolic links.Timo Warns
Signed-off-by: Timo Warns <warns@pre-sense.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-17Merge branch 'pm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
2011-08-17mm: fix __page_to_pfn for a const struct page argumentIan Campbell
This allows the cast in lowmem_page_address (introduced as a warning fixup to 33dd4e0ec911 "mm: make some struct page's const") to be removed. Propagate const'ness to page_to_section() as well since it is required by __page_to_pfn. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-17mm: make HASHED_PAGE_VIRTUAL page_address' struct page argument const.Ian Campbell
Followup to 33dd4e0ec911 "mm: make some struct page's const" which missed the HASHED_PAGE_VIRTUAL case. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-17Merge branches 'ipoib' and 'iser' into for-nextRoland Dreier
2011-08-17Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf probe: Filter out redundant inline-instances perf probe: Search concrete out-of-line instances perf probe: Avoid searching variables in intermediate scopes perf probe: Fix to search local variables in appropriate scope perf probe: Warn when more than one line are given perf probe: Fix to walk all inline instances perf probe: Fix to search nested inlined functions in CU perf probe: Fix line walker to check CU correctly perf probe: Fix a memory leak for scopes array perf: fix temporary file ownership check perf report: Use properly build_id kernel binaries perf top browser: Remove spurious helpline update
2011-08-17Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rtc: Limit RTC PIE frequency rtc: Fix hrtimer deadlock rtc: Handle errors correctly in rtc_irq_set_state() Fixup trivial conflicts in drivers/rtc/interface.c due to slightly trivially versions of the same patch coming in two different ways.
2011-08-17Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Fix wrong assumption in match_held_lock
2011-08-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Track the owner of irq descriptor irq: Always set IRQF_ONESHOT if no primary handler is specified genirq: Fix wrong bit operation
2011-08-17IB/iser: Support iSCSI PDU paddingOr Gerlitz
RFC3270 mandates that iSCSI PDUs are padded to the closest integer number of four byte words. Fix the iser code to support that on both the TX/RX flows. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-17IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)Or Gerlitz
The code that prepares the SG associated with SCSI command for FMR was buggy for systems with DMA addresses that don't fit in unsigned long, e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8. Fix that by casting to unsigned long long a masking constant used by the code. This resolves a crash in iser_sg_to_page_vec on this system. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-17xen/x86: replace order-based range checking of M2P table by linear oneJan Beulich
The order-based approach is not only less efficient (requiring a shift and a compare, typical generated code looking like this mov eax, [machine_to_phys_order] mov ecx, eax shr ebx, cl test ebx, ebx jnz ... whereas a direct check requires just a compare, like in cmp ebx, [machine_to_phys_nr] jae ... ), but also slightly dangerous in the 32-on-64 case - the element address calculation can wrap if the next power of two boundary is sufficiently far away from the actual upper limit of the table, and hence can result in user space addresses being accessed (with it being unknown what may actually be mapped there). Additionally, the elimination of the mistaken use of fls() here (should have been __fls()) fixes a latent issue on x86-64 that would trigger if the code was run on a system with memory extending beyond the 44-bit boundary. CC: stable@kernel.org Signed-off-by: Jan Beulich <jbeulich@novell.com> [v1: Based on Jeremy's feedback] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-17fat: fat16 support maximum 4GB file/vol size as WinXP or 7.Namjae Jeon
FAT16 support maximum 4GB vol/file size with 64KB cluster size. Win NT/XP/7 increased the maximum cluster size to 64KB, and file/vol size increased 4GB also. Although increasing, the file size of linux FAT is still limited at 2GB. I found that it is limited by sb->maxbytes(0x7fffffff) when partition is formatted by FAT16. sb->s_maxbytes in fill_super should be set to 0xffffffff like fat32. Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
2011-08-17fat: fix utf8 iocharset warning messageMihai Moldovan
The fat_msg function already formats the given message and appends a newline to it - we don't need to do this in the passed message string as well, or will end up with a blank line printed in the kernel log ring buffer. Also change the loglevel from error to warning. Signed-off-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
2011-08-17fat: fix build warningJonas Aberg
This fixes a compile warning (unititialized variable) in the fat filesystem code. Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
2011-08-17ASoC: Fix check for symmetric rate enforcementSascha Hauer
The ASoC core tries to not enforce symmetric rates when two streams open simultaneously. It does so by checking rtd->rate being zero. This works exactly once after booting because it is not set to zero again when the streams close. Fix this by setting rtd->rate when no active stream is left. [This leads to lots of warnings about not enforcing the symmetry in some situations as there's a race in the userspace API where we know we've got two applications but don't know what rates they want to set. -- broonie ] Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-16Input: atmel_mxt_ts - report pressure information from the driverYufeng Shen
Atmel mxt1386 touch controller has the touch pressure information so let's report it to the user space. [dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.] Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16Input: bcm5974 - Add support for newer MacBookPro8,2Andrew Drake
New MacBook Pro devices reporting product name MacBookPro8,2 come with newer/higher resolution touchpads than others with the same product name with USB ID 05ac:0252. This patch adds support for these devices. Signed-off-by: Andrew Drake <adrake@adrake.org> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-16Btrfs: truncate pages from clone ioctl target rangeSage Weil
We need to truncate page cache pages for the clone ioctl target range or else we'll confuse ourselves to no end. If the old data was cached, we used to still see it (until remount). If the page was partially updated we used to get a mix of old and new data. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 20:44:24 +0000