summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2005-10-31[SERIAL] Update serial_core documentationRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31[SERIAL] Arrange better identification of portsRussell King
Folk seem to get confused when they see two or more ttyS0 ports appearing at boot time. One comes from the legacy table, and one from PNP. Hence, display the bus ID of the device which supplied the port. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31powerpc: import a fix from arch/ppc/mm/pgtable.cPaul Mackerras
... namely, the change to the 2-argument pte_alloc_kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31powerpc: apply recent changes to merged codePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31Merge ../linux-2.6 by handPaul Mackerras
2005-10-31ppc: remove duplicate export of cur_cpu_specPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31powerpc: Fix bug arising from having multiple memory_limit variablesPaul Mackerras
We had a static memory_limit in prom.c, and then another one defined in setup_64.c and used in numa.c, which resulted in the kernel crashing when mem=xxx was given on the command line. This puts the declaration in system.h and the definition in mem.c. This also moves the definition of tce_alloc_start/end out of setup_64.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
2005-10-30[PATCH] fat: Remove duplicate directory scanning codePekka Enberg
This patch removes duplicate directory scanning code from fs/fat/dir.c. The two functions that share identical code are fat_readdirx() and fat_search_long(). This patch also renames fat_readdirx to __fat_readdir(). Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fat: remove the unneeded vfat_find() in vfat_rename()OGAWA Hirofumi
Now, vfat_rename() is using vfat_find() for sanity check. This removes that sanity check, the cost of sanity check is too high. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fat: cleanup and optimization of checksumOGAWA Hirofumi
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Remove duplicate code in signal.cPaul E. McKenney
Combine a bit of redundant code between force_sig_info() and force_sig_specific(). Signed-off-by: paulmck@us.ibm.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] remove unneeded SI_TIMER checksOleg Nesterov
This patch removes checks for ->si_code == SI_TIMER from send_signal, specific_send_sig_info, __group_send_sig_info. I think posix-timers.c used these functions some time ago, now it sends signals via send_{,group_}sigqueue, so these hooks are unneeded. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] cleanup the usage of SEND_SIG_xxx constantsOleg Nesterov
This patch simplifies some checks for magic siginfo values. It should not change the behaviour in any way. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] remove hardcoded SEND_SIG_xxx constantsOleg Nesterov
This patch replaces hardcoded SEND_SIG_xxx constants with their symbolic names. No changes in affected .o files. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: hpet driver cleanupsRandy Dunlap
- Use kzalloc() instead of kmalloc + memset. - Clean/fix some printk's. - Use NULL for pointers instead of 0. - Combine hpet busy searching locations into a function call. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: use HPET physical addresses for dup. detectionRandy Dunlap
- Use HPET physical address to detect duplicates, not logical addresses. Using logical (mapped) addresses fails to detect duplicates because ioremap() returns a new mapped address each time. - iounmap() regions when duplicate/busy areas are found. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow HPET FIXED_MEM32 resource typeRandy Dunlap
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32 for the HPET reource. Use the fixed resoure size of 1 KB for the HPET resource as per the HPET spec. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: simplify initialization messageClemens Ladisch
When booting, display the timer frequency in Hertz instead of as tick length in nanoseconds. Apart from saving a local variable, this makes the message more easily comprehensible. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous indirectionsClemens Ladisch
In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the hpetp variable, so we can use just that. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix access to multiple HPET devicesClemens Ladisch
Fix two instances where a function would access the first HPET device instead of the current one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix uninitialized variable in hpet_register()Clemens Ladisch
Clear the ht_opaque field in the hpet_register() function before searching for a free timer to prevent the function from incorrectly assuming that the search succeeded afterwards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix division by zero in HPET_INFOClemens Ladisch
Fix a division by zero that happened when the HPET_INFO ioctl was called before a timer frequency had been set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix HPET_INFO calls from kernel spaceClemens Ladisch
Fix a wrong memory access in hpet_ioctl_common(). It was not possible to use the HPET_INFO ioctl from kernel space because it always called copy_to_user(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet-RTC: cache the comparator registerClemens Ladisch
Reads from an HPET register require a round trip to the south bridge and are almost as slow as PCI reads. By caching the last value we've written to the comparator register, we can eliminate all HPET reads from the fast path in the emulated RTC interrupt handler. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet-RTC: fix timer config register accessesClemens Ladisch
Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might have initialized it to periodic mode. Furthermore, don't set the SETVAL bit in the config register. This wouldn't have any effect unless the timer was in period mode (which it isn't), and then the actual timer frequency would be half that of the desired one because incrementing the comparator in the interrupt handler would be done after the hardware has already incremented it itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet-RTC: disable interrupt when no longer neededClemens Ladisch
When the emulated RTC interrupt is no longer needed, we better disable it; otherwise, we get a spurious interrupt whenever the timer has rolled over and reaches the same comparator value. Having a superfluous interrupt every five minutes doesn't hurt much, but it's bad style anyway. ;-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow shared interruptsClemens Ladisch
This patch adds support for shared HPET interrupts. The driver previously acknowledged interrupts for both edge and level interrupts, but didn't actually allow a shared interrupt in the latter case. We use a new per-timer flag to save whether the timer's interrupt might be shared, and use it to do the processing required for level interrupts only if necessary. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow non-power-of-two frequenciesClemens Ladisch
It was only the RTC hardware that restricted interrupt frequencies to a power of two. There is no reason to take over this restriction into the HPET driver, so remove the offending check. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous register readsClemens Ladisch
This patch removes several reads of a timer's config register that serve no purpose whatsoever. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove unused variableClemens Ladisch
The variable hpet_ntimer is never read, so remove it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] HPET: make frequency calculations 32 bit safeClemens Ladisch
On 32-bit architectures, the multiplication in the argument for hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer, this happens when the desired frequency exceeds 61 Hz. To avoid this multiplication, we can precompute and store the hardware timer frequency, instead of the period, in the device structure, which leaves us with a simple division when computing the number of timer ticks. As a side effect, this also removes a theoretical bug where the timer interpolator's frequency would be computed as a 32-bit value even if the HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: disallow zero interrupt frequencyClemens Ladisch
Disallow setting an interrupt frequency of zero (which would result in a division by zero), and disallow enabling the interrupt when the frequency hasn't yet been set (which would use an interrupt period of zero). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] sparse cleanups: NULL pointers, C99 struct init.Randy Dunlap
Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm-tidiesAndrew Morton
- Various whitespace fixes - Use kzalloc() Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Infineon TPM: move infineon driver off pci_devMarcel Selhorst
Move the Infineon TPM driver off pci device and makes it a pure pnp-driver. It includes pnp-port validation and region requesting. Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: move nsc driver off pci_devKylene Jo Hall
This patch changes the nsc driver from a pci driver to a platform driver. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: move atmel driver off pci_devKylene Jo Hall
This patch changes the atmel driver from a pci driver to a platform driver. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: change from pci_dev to dev power management functionsKylene Jo Hall
This patch is in support of moving away from the lpc bus pci_dev. The power management prototypes used by platform drivers is different but the functionality remains the same. Signed-off-by: Kylene Hall <kjhall@us.ibm.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: remove pci dependencyKylene Jo Hall
Since the tpm does not have it's own pci id we have been consuming the lpc bus. This is not correct and causes problems to support non lpc bus chips. This patch removes the dependency on pci_dev from tpm.c The subsequent patches will stop the supported chips from registering as pci drivers. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: add status function to allow non-lpc bus chipsKylene Jo Hall
This patch is in preparation of supporting chips that are not necessarily on the lpc bus and thus are not accessed with inb's and outb's. The patch replaces the call to get the chip's status in the tpm.c file with a vendor specific status function. The patch also defines the function for each of the current supported devices. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Don't set dcdbas driver to default mAndi Kleen
It's nasty to set random drivers to default m because people who just press enter on make oldconfig get these. Remove the default m Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] sched: hardcode non-smp set_cpus_allowedPaul Jackson
Simplify the UP (1 CPU) implementatin of set_cpus_allowed. The one CPU is hardcoded to be cpu 0 - so just test for that bit, and avoid having to pick up the cpu_online_map. Also, unexport cpu_online_map: it was only needed for set_cpus_allowed(). Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] fix build on nls free systemsYuri Vasilevski
I made a patch that detects if libintl.h (needed for nls) is present on the host system and if it's not, it nls support is disabled by providing dummies for the used nls functions. This way if there is nls support on the host system the *config targets will build according to Arnaldo Carvalho de Melo's i18n modifications, else it just uses the original English messages. I have also made a bug report at kernel's bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=5501 And there is a discussion about this problem in Gentoo's bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=99810 Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] README doesn't mention bzip2 source tarballHorms
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] lib/string.c cleanup: restore useful memmove constPaul Jackson
A couple of (char *) casts removed in a previous cleanup patch in lib/string.c:memmove() were actually useful, as they suppressed a couple of warnings: assignment discards qualifiers from pointer target type Fix by declaring the local variable const in the first place, so casts aren't needed to strip the const qualifier. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Error checks omitted in init_tmpfs() in mm/tiny-shmem.cMatt Mackall
From: Hareesh Nagarajan <hnagar2@gmail.com> Signed-off-by: Hareesh Nagarajan <hnagar2@gmail.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-12 06:38:48 +0000