summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-05-09xtensa: clean up stpill_registersMax Filippov
- remove unused asm parameters; - fix EXCM bit setting in the PS SR during _spill_registers call. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: don't use a7 in simcallsMax Filippov
To support FRAME_POINTER avoid using a7 in __simc (none of the existing simcalls needs it). Replace calls to __simc with more specific simc_read, simc_write and simc_lseek calls. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: don't attempt to use unconfigured timersMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: provide default platform_pcibios_init implementationMax Filippov
This fixes the following build error: arch/xtensa/kernel/built-in.o:(.init.literal+0xe8): undefined reference to `platform_pcibios_init' arch/xtensa/kernel/built-in.o: In function `setup_arch': (.init.text+0x20e): undefined reference to `platform_pcibios_init' and allows platform to omit definition of platform_pcibios_init if it's empty. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: remove KCORE_ELF againPaul Bolle
The Kconfig symbol KCORE_ELF was removed in v2.6.0, but reappeared in two architectures. It is useless. Remove it again. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: document MMUv3 setup sequenceMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: add MMU v3 supportMax Filippov
MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: fix ibreakenable register updateMax Filippov
Only set the register when there is at least one ibreak register, otherwise the build fails: arch/xtensa/kernel/head.S:105: Error: invalid register 'ibreakenable' for 'wsr' instruction arch/xtensa/platforms/iss/setup.c:67: Error: invalid register 'ibreakenable' for 'wsr' instruction Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09xtensa: fix oprofile building as moduleMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09microblaze: Fix uaccess_ok macroMichal Simek
Fix access_ok macro no to permit case where user will try to access the last address space which is equal to segment address. Example: segment addr = 0xbfff ffff address = 0xbfff fff0 size = 0x10 Current wrong implementation 0xbfff ffff >= (0xbfff fff0 | 0x10 | (0xbfff fff0 + 0x10)) 0xbfff ffff >= (0xbfff fff0 | 0xc000 0000) 0xbfff ffff >= 0xf000 0000 return 0 which is access failed even the combination is valid. because get_fs().seq returns the last valid address. This patch fix this problem. Size equals to zero is valid access. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Add support for new cpu versions and target architectureMichal Simek
Update PVR values based on reference manual. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Do not select OPT_LIB_ASM by defaultMichal Simek
This option is valid only for BE systems. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Fix initrd supportMichal Simek
Initrd/ramdisk support has been never validated. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Do not use r6 in head.SMichal Simek
r6 stores pointer to ramdisk and shouldn't be used before it is passed to machine_early_init. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: pci: Remove duplicated headerMichal Simek
Remove duplicated header. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Set the default irq_domainDan Christensen
Register the irq_domain created during initialization as the default so that device drivers can pass NULL to irq_create_mapping and get a virtual irq to pass to request_irq. Signed-off-by: Dan Christensen <opello@opello.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: pci: Remove duplicated include from pci-common.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09watchdog: Fix race condition in registration codeGuenter Roeck
A race condition exists when registering the first watchdog device. Sequence of events: - watchdog_register_device calls watchdog_dev_register - watchdog_dev_register creates the watchdog misc device by calling misc_register. At that time, the matching character device (/dev/watchdog0) does not yet exist, and old_wdd is not set either. - Userspace gets an event and opens /dev/watchdog - watchdog_open is called and sets wdd = old_wdd, which is still NULL, and tries to dereference it. This causes the kernel to panic. Seen with systemd trying to open /dev/watchdog immediately after it was created. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-05-09watchdog: Convert to devm_ioremap_resource()Sachin Kamat
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-05-09KVM: VMX: fix halt emulation while emulating invalid guest sateGleb Natapov
The invalid guest state emulation loop does not check halt_request which causes 100% cpu loop while guest is in halt and in invalid state, but more serious issue is that this leaves halt_request set, so random instruction emulated by vm86 #GP exit can be interpreted as halt which causes guest hang. Fix both problems by handling halt_request in emulation loop. Reported-by: Tomas Papan <tomas.papan@gmail.com> Tested-by: Tomas Papan <tomas.papan@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-09blackfin: smp: fix smp build after drop asm/system.hSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-05-09blackfin: fix bootup core clock and system clock displayJames Cosin
From: James Cosin <jkosin@intcomgrp.com> fixes the number of digits to 6 after the decimal point to regain the significant 0s in the frequency after the decimal point. Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-05-08rbd: kill rbd_img_request_get()Alex Elder
Get rid of rbd_img_request_get(), because it isn't used, and maybe won't ever be needed. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-08rbd: only set up watch for mapped imagesAlex Elder
Any changes to parent images are immaterial to any mapped clone. So there is no need to have a watch event registered on header objects except for the header object of an image that is mapped. In fact, a watch request is a write operation, and we may only have read access to a parent image. We can't set up the watch request until we know the name of the header object though. So pass a flag to rbd_dev_image_probe() to indicate whether this probe is for a mapping or for a parent image. Change the second parameter to rbd_dev_header_watch_sync() be Boolean while we're at it. This resolves: http://tracker.ceph.com/issues/4941 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-08rbd: set mapping read-only flag in rbd_add()Alex Elder
The rbd_dev->mapping field for a parent image is not meaningful. Since rbd_image_probe() is used both for images being mapped and their parents, it doesn't make sense to set that flag in that function. So move the setting of the mapping.read_only flag out of rbd_dev_image_probe() and into rbd_add() instead. This resolves: http://tracker.ceph.com/issues/4940 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-08rbd: support reading parent page dataAlex Elder
Currently, rbd_img_parent_read() assumes the incoming object request contains bio data. But if a layered image is part of a multi-layer stack of images it will result in read requests of page data to parent images. Fortunately, it's not hard to add support for page data. This resolves: http://tracker.ceph.com/issues/4939 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-08rbd: fix an incorrect assertion conditionAlex Elder
In rbd_img_obj_parent_read_full_callback() there is an assertion intended to verify the size of the image request for a full parent read was the size of the original request's target object. But assertion was looking at the parent image order rather than the original one, and these values can differ. Fix that. This resolves: http://tracker.ceph.com/issues/4938 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-08ARM: dts: Configure and fix the McSPI pins for 4430sdpTony Lindgren
The bootloader configures the pins, but has pull bits set without pull enable bits. While this is harmless, and won't do anything, it seems to cause confusion at least for me every time looking at the pin configuration. Fix it for DT based boot. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: dts: AM33XX: Add GPMC nodePhilip Avinash
Add GPMC data node to AM33XX device tree file. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: dts: OMAP4460: Fix CPU OPP voltagesNishanth Menon
commit d16fb25 (ARM: dts: OMAP4460: Add CPU OPP table) introduced wrong OPP voltages per OPP by mistake. Sync the OPP tables with existing OMAP4460 OPP data in arch/arm/mach-omap2/opp4xxx_data.c Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: dts: OMAP36xx: Fix CPU OPP voltagesNishanth Menon
commit 3027e26 (ARM: dts: OMAP36xx: Add CPU OPP table) introduced wrong OPP voltages per OPP by mistake. Sync the OPP tables with existing OMAP36xx OPP data in arch/arm/mach-omap2/opp3xxx_data.c Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as modulePeter Ujfalusi
Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 SiVaibhav Hiremath
Add support for chip id detection of AM335x PG2.1 Silicon. Currently omap3xxx_check_revision() detects PG1.0 and PG2.0 only, this patch extends it by adding PG2.1 Si support. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08omap: mux: add AM/DM37x gpiosChristoph Fritz
This patch adds GPIO pins found on AM/DM37x. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08Merge branch 'omap-gpmc-fixes-for-v3.10' of git://github.com/jonhunter/linux ↵Tony Lindgren
into fixes
2013-05-08Add support for fan button on Ideapad Z580Maxim Mikityanskiy
The patch adds support for fan control button on Ideapad Z580. This is the same button as on Z570, but it raises different bit in VPCCMD_R_SPECIAL_BUTTONS. Also add message to dmesg when unknown button press detected, it will help adding support for new special buttons. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Tested-by: Ivan Vojtko <nekroman.sk@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08pvpanic: pvpanic device driverHu Tao
pvpanic device is a qemu simulated device through which guest panic event is sent to host. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75AAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1172151 Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that user can toggle wifi function through function key correctly. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08drivers: platform: x86: Use PTR_RET functionAlexandru Gheorghiu
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08sony-laptop: SVS151290S kbd backlight and gfx switch supportArthur Wirski
SVS151290S series uses handle 0x0163 for keyboard backlight and 0x015B for the graphics switch. Signed-off-by: Arthur Wirski <awirski@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08hp-wmi: add more definitions for new event_id'sAlex Hung
New HP laptops start generating new events, and hp-wmi prints unknown event_ids for them. This patch also removes these messages Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08dell-laptop: Fix krealloc() misuse in parse_da_table()David Woodhouse
If krealloc() returns NULL, it *doesn't* free the original. So any code of the form 'foo = krealloc(foo, …);' is almost certainly a bug. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08hp_accel: Ignore the error from lis3lv02d_poweron() at resumeShuah Khan
The error in lis3lv02_poweron() is harmless in the resume path, so we should ignore it. It is inline with the other usages of lis3lv02_poweron() and matches the 3.0 code for this routine. This patch is in suse git and might have missed making it into the mainline. opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Shuah Khan <shuah.khan@hp.com> CC: stable@vger.kernel.org 3.8, 3.4, 3.5, 3.2 Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08dell: add new dell WMI format for the AIO machinesAceLan Kao
There is a new DELL WMI spec. with new WMI event format. I'm working on the AIO machines, but I think the new format will apply to all the Dell's machines, not only for AIO, which will be released later this year. The new format of the WMI buffer is shown as below word 0 - the number of words following in the WMI buffer(not including this word. word 1 - the event type 0x0000 - A hot key is pressed or an event occurred 0x000F - A sequence of hot keys are pressed word 2 and on - the event data Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()Wei Yongjun
Add the missing iounmap() before return from omap1_system_dma_init() in the error handling case. Also removed platform_device_del() on add resources error case which cause dup device delete. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP2+: omap_device: use late_initcall_syncKevin Hilman
If DEBUG_LL and earlyprintk are enabled, and omap-serial.c is compiled as a module, the kernel boot hangs early as the clocks for serial port are cut while earlyprintk still uses the port. The problem is a race between the late_initcall for omap_device (which idles devices that have no drivers) and the late_initcall in kernel/printk.c which turns off the earlyconsole. Any printks that happen between this omap_device late initcall and the earlyconsole late initcall will crash when accessing the UART. The fix is to ensure the omap_device initcall happens after the earlyconsole initcall. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devicesAaro Koskinen
Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Joni Lapilainen <joni.lapilainen@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/BxRoger Quadros
On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is reversed when compared to other revisions i.e. it is active high instead of active low. Use the beagle_config.usb_pwr_level flag correctly so that the power regulator can be configured at runtime. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-08Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-05-08Merge tag 'arm64-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 update from Catalin Marinas: - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32 specifics (the 'gic' branch merged), it can be enabled on arm64. - Enable arm64 support for poweroff/restart (for code under drivers/power/reset/). - Fixes (dts file, exception handling, bitops) * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Treat the bitops index argument as an 'int' arm64: Ignore the 'write' ESR flag on cache maintenance faults arm64: dts: fix #address-cells for foundation-v8 arm64: vexpress: Add support for poweroff/restart arm64: Enable support for the ARM GIC interrupt controller
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 19:56:38 +0000