summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2011-06-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/rtlwifi/pci.c include/linux/netlink.h
2011-06-24Bluetooth: include scatterlist.h where neededStephen Rothwell
net/bluetooth/smp.c: In function 'smp_e': net/bluetooth/smp.c:49:21: error: storage size of 'sg' isn't known net/bluetooth/smp.c:67:2: error: implicit declaration of function 'sg_init_one' net/bluetooth/smp.c:49:21: warning: unused variable 'sg' Caused by commit d22ef0bc83c5 ("Bluetooth: Add LE SMP Cryptoolbox functions"). Missing include file, presumably. This batch has been in the bluetooth tree since June 14, so it may have been exposed by the removal of linux/mm.h from netdevice.h ... Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-24qlcnic: multi protocol internal loopback support added.Sucheta Chakraborty
Driver will generate loopback traffic pattern and do the test. And returns result of the test to application. Updated driver version to 5.0.19. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Add support to enable/disable FW dump capabilityAnirban Chakraborty
In certain situations, it may be required to not enable FW dump capability. Add support to turn off/on FW dump capability. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: fix default operating state of interfaceAmit Kumar Salecha
Currently interface shows status as RUNNING, even if there is no link. To fix this, netif_carrier_off should be called qlcnic_open(). Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: fix initial number of msix entries in adapter.Sucheta Chakraborty
Calculation of number of MSI-X vectors was wrong on uniprocessor systems. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Add code to tune FW dumpAnirban Chakraborty
To accommodate change in FW dump template, it is required to modify the FW dump routine that captures cache data. Also, the default mask is changed to capture a dump that would cover all the protocols that this FW supports. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Remove holding api lock while taking the dumpAnirban Chakraborty
With the change in logic for taking FW dump across multiple drivers, there is no need to hold onto the api lock anymore in the fw dump path. Instead use rtnl_lock() to synchronize the access to FW dump data structs. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24qlcnic: Add capability to take FW dump deterministicallySritej Velaga
In presence of multiple functions, current driver implementation does not guarantee that the FW dump is taken by the same function that forces it. Change it by adding a fw reset owner flag that could be changed in the device reset path and only when a function determines that it needs to reset it. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-23Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-06-23ixgbe: update driver version stringDon Skidmore
Update the ixgbe driver version string to better match the Source Driver with similar device support. Likewise update to the current LAD Linux versioning scheme. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix ring assignment issues for SR-IOV and drop casesAlexander Duyck
This change fixes the fact that we would trigger a null pointer dereference or specify the wrong ring if the rings were restored. This change makes certain that the DROP queue is a static value, and all other rings are based on the ring offsets for the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: disable RSC when Rx checksum is offEmil Tantilov
Disabling Rx checksumming leads to performance degradation due to RSC causing packets to have incorrect checksums. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: move reset code into a separate functionEmil Tantilov
Move reset code into a separate function to allow for reuse in other parts of the code. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: move setting RSC into a separate functionEmil Tantilov
Move setting RSC into a separate function to allow for reuse in other parts of the code. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add support for nfc addition and removal of filtersAlexander Duyck
This change is meant to allow for nfc to insert and remove filters in order to test the ethtool interface which includes it's own rules manager. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add support for displaying ntuple filters via the nfc interfaceAlexander Duyck
This code adds support for displaying the filters that were added via the nfc interface. This is primarily to test the interface for now, but I am also looking into the feasibility of moving all of the ntuple filter code in ixgbe over to the nfc interface since it seems to be better implemented. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: add basic support for setting and getting nfc controlsAlexander Duyck
This change adds basic support for the obtaining of RSS ring counts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: update perfect filter framework to support retaining filtersAlexander Duyck
This change is meant to update the internal framework of ixgbe so that perfect filters can be stored and tracked via software. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: fix flags relating to perfect filters to support coexistenceAlexander Duyck
I am removing the requirement that Ntuple filters have the same number of queues and requirements as ATR. As a result this change will make it so that all the Ntuple flag does is disable ATR for now. This change fixes an issue in which we were incorrectly re-enabling ATR when we exited perfect filter mode. This was due to the fact that the logic assumed RSS and DCB were mutually exclusive which is no longer the case. To correct this we just need to add a check to guarantee DCB is disabled before re-enabling ATR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23ixgbe: remove ntuple filteringAlexander Duyck
Due to numerous issues in ntuple filters it has been decided to move the interface over to the network flow classification interface. As a first step to achieving this I first need to remove the old ntuple interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-06-23net: Fix build failures due to ip_is_fragment()David S. Miller
It needs to be available even when CONFIG_INET is not set. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-23dcb: use nlmsg_free() instead of kfree()Dan Carpenter
These sk_buff structs were allocated with nlmsg_new() so they should be freed with nlmsg_free(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-23bonding: add min links parameter to 802.3adstephen hemminger
This adds support for a configuring the minimum number of links that must be active before asserting carrier. It is similar to the Cisco EtherChannel min-links feature. This allows setting the minimum number of member ports that must be up (link-up state) before marking the bond device as up (carrier on). This is useful for situations where higher level services such as clustering want to ensure a minimum number of low bandwidth links are active before switchover. See: http://bugzilla.vyatta.com/show_bug.cgi?id=7196 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22ssb: add __devinit to some functionsHauke Mehrtens
Two functions in ssb are using register_pci_controller() which is __devinit. The functions ssb_pcicore_init_hostmode() and ssb_gige_probe() should also be __devinit. This fixes the following warning: WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller() The function ssb_pcicore_init_hostmode() references the function __devinit register_pci_controller(). This is often because ssb_pcicore_init_hostmode lacks a __devinit annotation or the annotation of register_pci_controller is wrong. WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller() The function ssb_gige_probe() references the function __devinit register_pci_controller(). This is often because ssb_gige_probe lacks a __devinit annotation or the annotation of register_pci_controller is wrong. Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: enable support for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: add external_reset callback to ath9k_platfom_data for AR9330Gabor Juhos
The patch adds a callback to ath9k_platform_data. If the callback is provided by the platform code, then it can be used to hard reset the WMAC device. The callback is required for doing a hard reset of the AR9330 chips to get them working again after a hang. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: configure internal regulator for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: configure diversity based on eeprom contents for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: fix few register offsets for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: set diversity group for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: add fast_div_bias configuration for diversity group 1Gabor Juhos
The patch adds the missing configuration code for diversity group 1. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: remove superfluous parenthesesGabor Juhos
Also remove two empty lines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: fix antenna diversity configuration for non AR9485 chipsGabor Juhos
The current values must be used only on AR9485 chips. Other chips requires different values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: add a missing case statement to ath_ant_div_comb_alt_checkGabor Juhos
The 'ar9003_hw_antdiv_comb_conf_get' function sets div_group to 2 however that value is not used in 'ath_ant_div_comb_alt_check'. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: use correct max_streams for AR9330Gabor Juhos
The AR9330 is a single stream chip. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: enable antenna diversity for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: set NF limits for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: configure xpa bias level for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: use correct EEPROM base for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: enable tuning capacitance configuration for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: skip internal regulator configuration for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: enable TX/RX data byte swap for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: configure RF channel frequency for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: fix channel frequency calculation for AR9340Gabor Juhos
A multiplication is missing from the current formula. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: read spur frequency information from eeprom for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: don't enable LDPC for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: use different BB watchdog timeout value for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: add AR9330 specific PLL initializationGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22ath9k: initialize rx gain table for AR9330Gabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-03 04:47:03 +0000