summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-05-19V4L/DVB: dvb/stv6110x: cleanup error handlingDan Carpenter
The "stv6110x" is NULL so we can just return directly without calling kfree(). Also I changed the printk() to make checkpatch.pl happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to KconfigDevin Heitmueller
Add the demod and tuner dependencies required for the Avermedia m780 to the Kconfig for the ngene driver. Thanks to Oliver Endriss for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: start separating out DVB functions into separate fileDevin Heitmueller
Start moving the dvb specific code to ngene-dvb.c. Note that there is still stuff in ngene-core.c which could potentially be moved out, but it will require considerable reworking of the logic in order to continue to properly support DVB while also being able to support transport streams coming from analog MPEG encoders. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: split out card specific code into a separate fileDevin Heitmueller
Split out the card profiles into a new file called ngene-cards.c. This is part of a larger refactoring of the driver in preparation for adding analog support. Note that this patch makes *no* functional change - all I did was cut/paste the code and add the function prototypes to ngene.h as needed. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: split out i2c code into a separate fileDevin Heitmueller
Split out the i2c related code from the ngene-core.c into a new file called ngene-i2c.c. This is part of a larger refactoring of the driver in preparation for adding analog support. Note that this patch makes *no* functional change - all I did was cut/paste the code and add the function prototypes to ngene.h as needed. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: add initial support for digital side of Avermedia m780Devin Heitmueller
Add ATSC/QAM support for the Avermedia m780. Note that this patch does not include any analog support for the board, as the ngene bridge driver does not yet have analog implemented Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: properly support boards where channel 0 isn't a TS inputDevin Heitmueller
The current code assumes that channel zero is always a TS input, which would result in an oops if the "one_adapter" modprobe option is 1 (which it is by default) and the board in question has something else on channel zero (which is the case for the Avermedia m780, which has it's analog input wired to UVI1) The code now explicitly tracks the first adapter created and ensures that other channels cannot accidentially be associated with a NULL adapter. Also, eliminate what appears to be a typo where all of the channel parameters are getting associated with stream zero's properties, which will work if you happen to have a dual stream board with the exact same configuration, but if they differ then the second stream is going to end up with the first stream's configuration. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L-DVB: ngene: make sure that tuner headers are includedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/az6027: handle -EIO failureDan Carpenter
If the az6027_usb_in_op() returns a negative errno ret is -EIO and in that case the value of b[0] may be undefined. The original code assigned 0 to ret, but since it's already 0 now we can skip that. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/az6027: doing dma on the stackDan Carpenter
I changed the dma buffers to use allocated memory instead of stack memory. The reason for this is documented in Documentation/DMA-API-HOWTO.txt under the section: "What memory is DMA'able?" That document was only added a couple weeks ago and there are still lots of modules which haven't been corrected yet. Btw. Smatch includes a pretty good test to find places which use stack memory as a dma buffer. That's how I found these. (http://smatch.sf.net). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/IR/imon: potential double unlock on errorDan Carpenter
If there is an error here we should unlock in the caller (which is imon_init_intf1()). We can remove this stray unlock. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/IR/imon: testing the wrong variableDan Carpenter
There is a typo here. We meant to test "ir" instead of "props". The "props" variable was tested earlier. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/IR/imon: precendence issue: ! vs ==Dan Carpenter
The original condition is always false because ! has higher precedence than == and neither 0 nor 1 is equal to IMON_DISPLAY_TYPE_VGA. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tvp7002.c: fix some copy-paste errors in the commentsMats Randgaard
Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tvp7002.c: Add support for enum_dv_presetsMats Randgaard
Implement enum_dv_presets in tvp7002. Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l2-subdev.h: Add support for enum_dv_presetMats Randgaard
The op enum_dv_preset was missing in this header but is needed by subdev drivers with DV functionality. Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: gspca - sn9c20x: Fix non working mt9v111 sensorBrian Johnson
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: gspca - sn9c20x: HAS_BUTTON flag -> HAS_NO_BUTTON flagBrian Johnson
Reverse HAS_BUTTON logic since most webcams either have a button or if they don't don't bother to send any interrupts. However I have at least one model that appears to leave the button GPIO floating and can send a bogus interrupt. Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: gspca - sn9c20x: Add another MSI laptop to upsidedown device listBrian Johnson
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: gspca - sn9c20x: Add another laptop to upsidedown device listBrian Johnson
Signed-off-by: Brian Johnson <brijohn@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ivtv: fix VIDIOC_S_PRIORITY handlingHans Verkuil
VIDIOC_S_PRIORITY is also part of the ioctls that need to check the access priority. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: usbvision: add delay before detecting the saa711xHans Verkuil
The detection of the saa711x often failed. Adding a small delay before attempting to detect it fixed this. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: usbvision: don't use usb_set_intfdata, let v4l2_device_register ↵Hans Verkuil
handle this v4l2_device_register already sets intfdata, no need to do this again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: hdpvr: fix disconnect sequenceHans Verkuil
Disconnecting the HDPVR caused a kernel oops if lockdep was enabled. In addition, if an app still had video0 open and attempted to call ioctl when the device was already disconnected the system would crash. Move the freeing and cleanup code to the release function: that is the right place for it since you know when you get there that nobody is using the device. Also removed usb_set_intfdata: v4l2_device_register sets this already to v4l2_dev. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: radio-am800: let v4l2_device_(un)register handle usb_get/set_intfdataHans Verkuil
v4l2_device_register already sets the usb intfdata to v4l2_dev. So use that instead. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l2-dev: remove unnecessary lock around atomic clear_bitHans Verkuil
No need to lock when unregistering the device: clear_bit is already an atomic operation. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: em28xx: g_tuner must set type fieldHans Verkuil
The 'type' field was undefined but should be set to ANALOG_TV. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tvp7002: fix query_dv_presetHans Verkuil
If no signal or valid format is detected, then VIDIOC_QUERY_DV_PRESET must return 0 and set the preset to V4L2_DV_INVALID. This driver returned an error instead. Also simplified the kernel messages a bit: change v4l2_err to v4l2_dbg (not detecting a signal/valid format is not an error, so only print this info when debug == 1) and do not call v4l_fill_dv_preset_info: it's overkill to do this just for a debug message. Thanks to Mats Randgaard for bringing this to my attention. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l2-common: simplify prio utility functionsHans Verkuil
v4l2_prio_init/open/close returned an int when in fact they would always return 0. Make these void functions. v4l2_prio_close and v4l2_prio_check pass an enum v4l2_priority as a pointer for no good reason. Replace with a normal enum v4l2_priority argument. These changes will simplify the work of moving priority handling into the v4l core. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: bttv: remove bogus prio check in g_frequencyHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Documentation: fix small error in the ENUMINPUT docHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx18/cx25840/saa7115/tvp5150: remove vbi support from s_fmtHans Verkuil
Now that s_fmt is no longer used for VBI format setup in subdevs, remove the VBI support from s_fmt. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: em28xx: switch to new vbi subdev opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx231xx: switch to new vbi subdev opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: pvrusb2: switch to new vbi subdev opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx18: switch to new vbi subdev opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ivtv: switch to new vbi subdev opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: tvp5150: support new vbi ops to set/get VBI formatHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: saa7127: support new vbi ops to set/get VBI formatHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx18: support new vbi ops to set/get VBI formatHans Verkuil
Also removed the bogus zeroing of fmt.sliced when setting up raw VBI. This should have been removed in ivtv, but it was just copied-and-pasted into cx18. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx25840: support new vbi ops to set/get VBI formatHans Verkuil
Also removed the bogus zeroing of fmt.sliced when setting up raw VBI. Switching between raw and sliced VBI changed in 2.6.28 and this memset should have been removed at that time. It was never noticed because the bridge driver will fill in the fmt.vbi values anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: saa7115: support new vbi ops to set/get VBI formatHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l: add new subdev vbi ops to handle raw and sliced vbiHans Verkuil
Currently raw and sliced vbi is setup using the video g/s_fmt ops. However, we want to split off the vbi formatting into separate ops so the first step is to create those new ops. The next step will be to convert subdev drivers and bridge drivers to use the new ops. And in the final step we can start converting the video g/s_fmt ops to the new (and more appropriate) mediabus format ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l: move vbi-specific video ops to a new vbi ops structHans Verkuil
Only a relatively small number of video receivers and transmitters actually support VBI. So start moving the vbi specific ops to an ops struct of their own. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: gspca - main: Convert wMaxPacketSize from little endian 16 to cpuJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: MAINTAINERS: Update uvcvideo web site addressLaurent Pinchart
The web site has moved to a new location, update the MAINTAINERS file. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: uvcvideo: Prevent division by 0 when control step value is 0Laurent Pinchart
The control step values reported by the device are used as a divisor unchecked, which can result in a division by zero. Check the step value and make it 1 when null. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: uvcvideo: Flag relative controls as write-onlyLaurent Pinchart
The UVC relative controls (exposure time, iris, focus, zoom, pan/tilt) are write-only (despite the UVC specification stating that the GET_CUR request is mandatory). Mark the controls as such, and report the related V4L2 controls V4L2_CTRL_FLAG_WRITE_ONLY. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: uvcvideo: Add support for V4L2_PIX_FMT_Y16Laurent Pinchart
The Miricle 307K (17dc:0202) camera reports a 16-bit greyscale format, support it in the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: [-next] media: fix vivi build errorRandy Dunlap
vivi uses find_font(), which is only available when FONTS is enabled, so make vivi depend on FONTS. ERROR: "find_font" [drivers/media/video/vivi.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 19:01:28 +0000