summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-05-20[media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th tryMalcolm Priestley
Continuous flip of bit2 reg 0x70 can cause device to become unresponsive. Also correct reg read mistake. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] m88rs2000: LNB voltage control implementedIgor M. Liplianin
Trival patch to get it working with my cards stuff. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Acked-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] sta2x11_vip: Fix 60Hz video standard handlingMauro Carvalho Chehab
This device supports V4L2_STD_ALL, but its check for 60Hz standards is broken, as NTSC is not the only standard that uses 60Hz. Cc: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] STA2X11 VIP: new V4L2 driverFederico Vaga
V4L2 driver for the Video Input Port within STA2X11 board Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] videobuf-dma-contig: add cache supportFederico Vaga
Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] adv7180: add support to user controlsFederico Vaga
Video user controls such as brightness, contrast, saturation, and hue are now handled. Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rc: Fix invalid free_region and/or free_irq on probe failureBen Hutchings
fintek-cir, ite-cir and nuvoton-cir may try to free an I/O region and/or IRQ handler that was never allocated after a failure in their respective probe functions. Add and use separate labels on the failure path so they will do the right cleanup after each possible point of failure. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rc-it913x=v2 Incorrect assigned KEY_1Malcolm Priestley
Correct incorrect scancode for KEY_1 Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] ati_remote: add regular up/down buttons to Medion Digitainer keymapAnssi Hannula
There are many different Medion X10 remotes that need slightly different keymaps. We may not yet have all the needed keymaps, in which case a wrong keymap may be used. This happened with Medion X10 OR2x remotes before the keymap for them was added, causing the ati_remote driver to select the Medion Digitainer keymap instead. Unfortunately, the Medion Digitainer keymap doesn't have the standard X10 up/down scancodes assigned to KEY_UP and KEY_DOWN keycodes, making wrongly assigned remotes mostly unusable. Add the regular KEY_UP and KEY_DOWN scancodes to the Medion X10 Digitainer keymap, making any Medion remote mostly usable even when wrongly used with that keymap (standard buttons, such as up/down/left/right, 0-9, play/stop/pause, have the same scancode in all the X10 remotes). Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] ati_remote: add keymap for Medion X10 OR2x remotesAnssi Hannula
Add another Medion X10 remote keymap. This is for the Medion OR2x remotes with the Windows MCE button. The receiver shipped with this remote has the same USB ID as the other Medion receivers, but the name is different and is therefore used to detect this variant. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20Revert "[media] staging: media: go7007: Adlink MPG24 board issues"Mauro Carvalho Chehab
This patch were applied by mistake, as it were rejected by Don, who requested it to be broken into per-change patches. This reverts commit 0982db20aba5fd124bb5942d679d8732478e992a. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Volokh Konstantin <volokh84@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] staging/media/as102: remove version.h include at as102_fe.cjoseph daniel
There was a warning when ran "make versioncheck" drivers/staging/media/as102/as102_fe.c: 20 linux/version.h not needed. Signed-off-by: joseph daniel <josephdanielwalter@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] cx23885: TeVii s471 card supportIgor M. Liplianin
The card is similar to TeVii s470, but has different LNB power control. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] uvcvideo: Fix V4L2 button controls that share the same UVC controlLaurent Pinchart
The Logitech pan/tilt reset UVC control contains two V4L2 button controls to reset pan and tilt. As the UVC control is not marked as auto-update, the button bits are set but never reset. A pan reset that follows a tilt reset would thus reset both pan and tilt. Fix this by not caching the control value of write-only controls. All standard UVC controls are either readable or auto-update, so this will not cause any regression and will not result in extra USB requests. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] au0828: Add USB ID used by many donglesIsmael Luceno
Tested with Yfeng 680 ATV dongle. Signed-off-by: Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] staging: media: go7007: Adlink MPG24 board issuesVolokh Konstantin
This issuses applyed only for Adlink MPG24 board with go7007 & wis2804, all whese changes was tested for continuos load&restart mode This is minimal changes needed for start up go7007&wis2804 to work correctly in 3.4 branch Changes: - When go7007 reset device, i2c was not worked (need rewrite GPIO5) - As wis2804 has i2c_addr=0x00/*really*/, so Need set I2C_CLIENT_TEN flag for validity - some main nonzero initialization, rewrites with kzalloc instead kmalloc - STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we failed v4l2_device_unregister with kernel panic (OOPS) - some new v4l2 style features as call_all(...s_stream...) for using subdev calls - wis-tw2804.ko module code was incompatible with 3.4 branch in initialization v4l2_subdev parts. now i2c_get_clientdata(...) contains v4l2_subdev struct instead non standart wis_tw2804 struct Adds: - Additional chipset tw2804 controls with: gain,auto gain,inputs[0,1],color kill,chroma gain,gain balances, for all 4 channels (from tw2804.pdf) - Power control for each 4 ADC (tw2804) up when s_stream(...,1), down otherwise Signed-off-by: Volokh Konstantin <volokh84@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl28xxu: add small sleep for rtl2830 demod attachAntti Palosaari
Demod needs some time to wake up after power on. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: prevent hw access when sleepingAntti Palosaari
to prevent I/O errors... Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .get_frontend()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_signal_strength()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_ber()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_snr()Antti Palosaari
Reports value as a 0.1 dB. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] em28xx: disable LNA - PCTV QuatroStick nano (520e)Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] drxk: fix GPIOsAntti Palosaari
UIO-2 and UIO-3 were broken. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] fc0013 ver. 0.2: introduction of get_rf_strength functionHans-Frieder Vogt
Changes compared to version 0.1 of driver (sent 6 May): - Initial implementation of get_rf_strength function. - Introduction of a warning message Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] fc0012 ver. 0.6: introduction of get_rf_strength functionHans-Frieder Vogt
Changes compared to version 0.5 of driver (sent 6 May): - Initial implementation of get_rf_strength function. Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] fc001x: tuner driver for FC0013Hans-Frieder Vogt
Support for tuner Fitipower FC0013 Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] fc001x: tuner driver for FC0012, version 0.5Hans-Frieder Vogt
Support for tuner Fitipower FC0012 Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] fc001x: common header file for FC0012 and FC0013Hans-Frieder Vogt
Common defines for the FC0012 (v0.5) and FC0013 tuner drivers Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] lg2160: Fix a few warningsMauro Carvalho Chehab
drivers/media/dvb/frontends/lg2160.c: In function ‘lg216x_read_ucblocks’: drivers/media/dvb/frontends/lg2160.c:1336:1: warning: label ‘fail’ defined but not used [-Wunused-label] drivers/media/dvb/frontends/lg2160.c:1325:6: warning: unused variable ‘ret’ [-Wunused-variable] drivers/media/dvb/frontends/lg2160.c:1324:23: warning: unused variable ‘state’ [-Wunused-variable] drivers/media/dvb/frontends/lg2160.c: In function ‘lg216x_set_ensemble’: drivers/media/dvb/frontends/lg2160.c:420:23: warning: ‘reg’ may be used uninitialized in this function [-Wuninitialized] Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] DVB: remove "stats" property bits from ATSC-MH API property additionsMichael Krufky
Mauro is proposing a new API to handle statistics. This functionality will be returned after the statistics API is ready. Just remove them for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] mxl111sf: add ATSC-MH supportMichael Krufky
Add support for the ATSC-MH frontend on the WinTV Aero-m Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-usb: increase MAX_NO_OF_FE_PER_ADAP from 2 to 3Michael Krufky
The following patch adds support for a third frontend to exist on a single DVB adapter, in the mxl111sf driver. This patch allows that to be possible. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-usb: add support for dvb-usb-adapters that deliver raw payloadMichael Krufky
Select this feature setting the dvb-usb-adapter caps field with DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-demux: add functionality to send raw payload to the dvr deviceMichael Krufky
If your driver needs to deliver the raw payload to userspace without passing through the kernel demux, use function: dvb_dmx_swfilter_raw Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] lg2160: Don't fill the legacy DVBv3 ops.type fieldMauro Carvalho Chehab
This field should not be used anymore inside the frontend drivers. The DVB core won't rely on it. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] DVB: add support for the LG2160 ATSC-MH demodulatorMichael Krufky
This patch adds support for controlling the LG2160 and LG2161 ATSC-MH demodulators. [mchehab@redhat.com: fold with the next patch that was fixing the DVB ABI] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] mxl111sf-tuner: tune SYS_ATSCMH just like SYS_ATSCMichael Krufky
The MxL111SF tuner is programmed the same way for ATSC-MH as it is programmed for ATSC. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] increment DVB API to version 5.6 for ATSC-MH frontend controlMichael Krufky
increment the DVB API version to 5.6 to signify support for controlling an ATSC-MH frontend. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] DocBook: document new DTV Properties for ATSC-MH delivery systemMichael Krufky
Document the following properties for controlling an ATSC-MH frontend: DTV_ATSCMH_FIC_VER - Version number of the FIC signaling data DTV_ATSCMH_PARADE_ID - Parade identification number DTV_ATSCMH_NOG - Number of MH groups per MH subframe for a designated parade DTV_ATSCMH_TNOG - Total number of MH groups in all parades in one subframe DTV_ATSCMH_SGN - Start group number DTV_ATSCMH_PRC - Parade repetition cycle DTV_ATSCMH_RS_FRAME_MODE - RS frame mode DTV_ATSCMH_RS_FRAME_ENSEMBLE - RS frame ensemble DTV_ATSCMH_RS_CODE_MODE_PRI - RS code mode (primary) DTV_ATSCMH_RS_CODE_MODE_SEC - RS code mode (secondary) DTV_ATSCMH_SCCC_BLOCK_MODE - Series Concatenated Convolutional Code Block Mode DTV_ATSCMH_SCCC_CODE_MODE_A - Series Concatenated Convolutional Code Rate A DTV_ATSCMH_SCCC_CODE_MODE_B - Series Concatenated Convolutional Code Rate B DTV_ATSCMH_SCCC_CODE_MODE_C - Series Concatenated Convolutional Code Rate C DTV_ATSCMH_SCCC_CODE_MODE_D - Series Concatenated Convolutional Code Rate D DTV_ATSCMH_FIC_ERR - FIC error count DTV_ATSCMH_CRC_ERR - CRC error count DTV_ATSCMH_RS_ERR - RS error count Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] linux-dvb v5 API support for ATSC-MHMichael Krufky
Add the following properties for controlling an ATSC-MH frontend: DTV_ATSCMH_FIC_VER DTV_ATSCMH_PARADE_ID DTV_ATSCMH_NOG DTV_ATSCMH_TNOG DTV_ATSCMH_SGN DTV_ATSCMH_PRC DTV_ATSCMH_RS_FRAME_MODE DTV_ATSCMH_RS_FRAME_ENSEMBLE DTV_ATSCMH_RS_CODE_MODE_PRI DTV_ATSCMH_RS_CODE_MODE_SEC DTV_ATSCMH_SCCC_BLOCK_MODE DTV_ATSCMH_SCCC_CODE_MODE_A DTV_ATSCMH_SCCC_CODE_MODE_B DTV_ATSCMH_SCCC_CODE_MODE_C DTV_ATSCMH_SCCC_CODE_MODE_D DTV_ATSCMH_FIC_ERR DTV_ATSCMH_CRC_ERR DTV_ATSCMH_RS_ERR Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] gspca: the field 'frozen' is under CONFIG_PMHans Verkuil
The gspca_dev field 'frozen' is added only if CONFIG_PM is set. So add the relevant #ifdef's to various subdrivers that use it. The m32r daily build caught this mistake. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Use selection API in place of crop operationsSylwester Nawrocki
Replace deprecated crop operations with the selection API. Original crop ioctls are supported through a compatibility layer at the v4l2 core. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kuyngmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Add color effect controlSylwester Nawrocki
Add support for V4L2_CID_COLORFX control at the mem-to-mem and capture video nodes. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Update copyright noticesSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Add support for Exynos4x12 FIMC-LITESylwester Nawrocki
This patch adds driver for FIMC-LITE camera host interface. This new IP differs from the regular FIMC IP in that it doesn't have input DMA, scaler and color space conversion support. So it just plain camera host interface for MIPI-CSI2 and ITU-R interfaces. For the serial bus support it interworks with MIPI-CSIS and the exisiting s5p-csis driver. The FIMC-LITE and MIPI-CSIS drivers can also be reused in the Exynos5 SoC series. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Make sure an interrupt is properly requestedSylwester Nawrocki
Use dev_name() for requesting an interrupt so we don't get an interrupt requested with same name for multiple device instances. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Minor cleanupsSylwester Nawrocki
Tidy up the variant and driver data handling. Remove the 'samsung_' prefix from some data structures since it doesn't really carry any useful information and makes the names unnecessarily long. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Prefix format enumerations with FIMC_FMT_Sylwester Nawrocki
Prefix the pixel format enumerations with FIMC_FMT_ to make it more clear, especially when used in new IP drivers, like fimc-lite, etc. Also add IO_ prefix in the input/output enumeration. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] s5p-fimc: Rework the video pipeline control functionsSylwester Nawrocki
There is getting more entities to manage within single video pipeline in newer SoCs. To simplify code put subdevs' pointer into an array rather than adding new member in struct fimc_pipeline for each subdev. This allows to easier handle subdev operations in proper order. Additionally walk graph in one direction only in fimc_pipeline_prepare() function to make sure we properly gather only media entities that below to single data pipeline. This avoids wrong initialization in case where, for example there are multiple active links from s5p-mipi-csis subdev output pad. struct fimc_pipeline declaration is moved to the driver's public header to allow other drivers to reuse the fimc-lite driver added in subsequent patches. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 16:29:56 +0000