summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-08-15Merge branch 'for-2.6.36' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.37 Trivial overlap with the removal of the local revision variable. Conflicts: sound/soc/codecs/wm8994.c
2010-08-15ASoC: Automatically manage WM8580 DAC OSRMark Brown
The DAC OSR should be selected based on the sample clock ratio. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Fix inverted WM8580 capture mute controlMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Implement BCLK rate selection for WM8580Mark Brown
Drive a minimal supported number of clocks required for the current bit format in master mode. In slave mode this setting has no effect. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Automatically calculate clock ratio for WM8580Mark Brown
Implement set_sysclk() and then rather than assuming 256fs use the supplied value to calculate and configure the clock ratio for the currently used sample rate. As a side effect we also end up implementing clock selection for the ADC path. In order to avoid confusion remove the existing set_clkdiv() based configuration of the clock source for the DAC and update the SMDK64xx driver (which is the only in-tree user of the CODEC). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Remove unused rate selection bitmasks from WM8580Mark Brown
In the case of the BCLK rate the defines are at best misleading anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Convert WM8580 hw_params to use snd_soc_update_bits()Mark Brown
All the cool kids are using snd_soc_update_bits() these days. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Add a bit of resource unwinding in the S3C IISv4 driverMark Brown
There's much more needed but this'll get us started. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: update setting for pxa ssp slave modeHaojian Zhuang
SCFR bit is required to be always set if pxa ssp is in slave mode. This bit indicates clock input to SSPSCLK is only active during data transfers. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: fix pxa2xx-pcm.h pathHaojian Zhuang
Since pxa2xx-pcm.h is removed from sound/soc/pxa, we need to update the path in related files. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Tested-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: multi-component: Fix reference to moved header file, which was unused ↵Ian Lartey
anyway. Removed #include of pxa2xx-pcm.h Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-15ASoC: Remove redundant device name from debugfs directoryMark Brown
Since the core now includes deduplication in the name of CODEC devices there's no need to add extra for the debugfs directory name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-15ASoC: Set up debugfs only once per CODECMark Brown
Since the debugfs directory is current per CODEC we should only init it when the CODEC is initialised, otherwise we end up with errors being generated when an attempt is made to add duplicate debugfs entries. Since most of this stuff is actually for the card we should refactor but this can come later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-13MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devicesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-13MAINTAINERS: Make Wolfson entry also cover CODEC driversMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-13ASoC: Only tweak WM8994 chip configuration on devices up to rev DMark Brown
Any subsequent revisions will have these configuration changes applied by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-13ASoC: Optimise DSP performance for WM8994Mark Brown
Change the chip defaults to optimise performance of some of the DSP functionality. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Remove unused driver data from WM8961 probeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Staticise WM8727 codec driver structureMark Brown
Nothing should be referencing this any more. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Update WM8962 to build with multi-componentMark Brown
No notable changes, currently build tested only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-12Merge branch 'topic/multi-component' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into for-2.6.37
2010-08-12ASoC: multi-component: TWL4030: Restore registers on removalPeter Ujfalusi
Add back the register restore call, when the codec driver is removed. This does not affect normal operation, but it is usefull when debugging audio through the twl4030 class codecs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Automatically determine control_data for soc-cache usersMark Brown
Since the provision of a struct device for the CODEC is now mandatory we can use container_of() to locate the struct i2c_client and struct spi_device for relevant devices, removing the need to manually set it in each driver. A further patch will automate selection of the control type based on the bus_type of the struct device, further reducing the amount of driver code required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Add MODULE_ALIAS to Samsung DAI driversMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Remove version display from WM8971 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Remove unneeded control_data management from Wolfson driversMark Brown
Now soc-cache.c can figure out the I2C and SPI control data from the device for the CODEC we don't need to manually assign it in drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: Remove version display from WM8510 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12asoc/multi-component: fsl: add support for disabled SSI nodesTimur Tabi
Add support for adding "status = disabled" to an SSI node to incidate that it is not wired on the board. This replaces the not-so-intuitive previous method of omitting a codec-handle property. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12asoc/multi-component: fsl: fix exit and error paths in DMA and SSI driversTimur Tabi
The error handling code in the OF probe function of the SSI driver is not freeing all resources correctly. Since the machine driver no longer calls the DMA driver to provide information about the SSI, we don't need to keep a list of DMA objects any more. In addition, the fsl_soc_dma_remove() function is incorrectly removing *all* DMA objects when it should only remove one. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12asoc/multi-component: fsl: add support for 36-bit physical addressesTimur Tabi
Update the DMA driver used by the Freescale MPC8610 HPCD audio driver to support 36-bit physical addresses, for both DMA buffers and the SSI registers. The DMA driver calls snd_dma_alloc_pages() to allocate the DMA buffers for playback and capture. This function is just a front-end for dma_alloc_coherent(). Currently, dma_alloc_coherent() only allocates buffers in low memory (it ignores GFP_HIGHMEM), so we never actually get a DMA buffer with a real 36-bit physical address. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12powerpc: rename immap_86xx.h to fsl_guts.h, and add 85xx supportTimur Tabi
The immap_86xx.h header file only defines one data structure: the "global utilities" register set found on Freescale PowerPC SOCs. Rename this file to fsl_guts.h to reflect its true purpose, and extend it to cover the "GUTS" register set on 85xx chips. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: multi-component - Add Goni sound driverChanwoo Choi
This patch add sound support for the Goni board based on S5PV210. The Goni board is based on Samsung SoC(S5PV210) and include WM8994 codec over I2S to support sound. The kind of jack is below states : * SND_JACK_HEADPHONE * SND_JACK_HEADSET * SND_JACK_MECHANICAL : When TV-OUT cable is inserted on Goni board, the TV-OUT cable isn't connected to television. * SND_JACK_AVOUT : When TV-OUT cable is inserted on Goni board, the TV-OUT cable is connected to television. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: multi-component - Add Aquila sound driverChanwoo Choi
This patch add sound support for the Aquila board based on S5PC110. The Aquila board is based on Samsung SoC(S5PC110) and include WM8994 codec over I2S to support sound. This uses the I2Sv4 driver compatible with I2Sv5 to run sound. The kind of jack is below states : * SND_JACK_HEADPHONE * SND_JACK_HEADSET * SND_JACK_MECHANICAL : When TV-OUT cable is inserted on Aquila board, the TV-OUT cable isn't connected to television. * SND_JACK_AVOUT : When TV-OUT cable is inserted on Aquila board, the TV-OUT cable is connected to television. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> ASoC: multi-component: SAMSUNG: Fix wrong field name on Aquila board This patch modify the wrong field name on Aquila board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-10ASoC: add AD1980 obsolete informationSonic Zhang
This codec has been obsoleted by ADI, so add appropriate warnings to the source tree to dissuade people from using in new designs based on driver support. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-10ASoC: register cache should be 1 byte aligned for 1 byte long registerCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-08-10ASoC: Correct WM8580 Capture control namesMark Brown
Should use Capture rather than ADC so the UI tools can identify their function more readily. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-10ASoC: Document CFG switch settings for SMDK6410 WM8580 usageMark Brown
Sadly these aren't soft controllable and can't be read back either :( Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-10ASoC: Remove /s from widget names on SMDK64xx WM8580Mark Brown
Otherwise debugfs gets upset when we try to create filenames with / in them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-10ASoC: Fix inverted mute controls for WM8580Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-08-05ASoC: Fix for changed Eureka Kconfig symbol namesEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-05ASoC: Add initial WM8962 CODEC driverMark Brown
The WM8962 is a low power, high performance stereo CODEC designed for portable digital audio applications. This initial driver release supports the key audio paths of the WM8962. Extended functionality, such as microphone detection, digital microphones and the advanced DSP signal enhancements provided by the device are not yet supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-04ASoC: TWL4030: Capture route runtime DAPM ordering fixPeter Ujfalusi
Fix the ordering problem in DAPM domain, when the user changes between digital and analog sources during active capture (or loopback) scenario. Before this patch, when the user changed from analog source to digital there were a short time, when the codec enabled analog mic bias (2.2 volts) instead of the correct digital mic bias (1.8 volts) to the digital microphones. This behaviour caused by the former implementation of selecting the correct type of bias. This was done at the POST_REG event of the DAPM_MUX_E("TXx Capture Route") widget. By moving the bias type selection as DAPM_SUPPLY and connecting it to the corresponding digimic widget the problematic situation can be avoided. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-03ASoC: wm9081: fix resource reclaim in wm9081_register error pathAxel Lin
This patch fixes the error path in wm9081_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8978: fix a memory leak if a wm8978_register failAxel Lin
There is a memory leak found if wm8978_register() fail. This patch moves the buffer allocate and release at the same level to prevent the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8974: fix a memory leak if another WM8974 is registeredAxel Lin
wm8974 is allocated in wm8974_i2c_probe() but is not freed if wm8974_register() return -EINVAL (if another WM8974 is registered). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8961: fix resource reclaim in wm8961_register error pathAxel Lin
This patch fixes the error path in wm8961_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8955: fix resource reclaim in wm8955_register error pathAxel Lin
This patch fixes the error path in wm8955_register to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8940: fix a memory leak if wm8940_register return errorAxel Lin
This patch adds checking for wm8940_register return value, and does kfree(wm8940) if wm8940_register() fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03ASoC: wm8904: fix resource reclaim in wm8904_register error pathAxel Lin
This patch includes below fixes: 1. wm8904 need to be kfreed in wm8904_register() error path before return. 2. fix the error path for snd_soc_register_codec() fail and snd_soc_register_dai() fail to properly free resources. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-05 07:44:50 +0000