summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-07-27libertas: convert DEEP_SLEEP timer to a direct commandDan Williams
Other uses were already used direct command paths. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert PS_MODE to a direct commandDan Williams
Powersave looks like it got broken at some point but we'll fix that up when the command submission stuff is more understandable, which this series helps to do. That said, this patch should not further break powersave. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect command response handlerDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert CMD_FWT_ACCESS to a direct commandDan Williams
Slightly different approach here since there are so many arguments to the firmware command. Just let the caller fill them in before pushing the command to the firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert Mesh Blinding Table access to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert register access to direct commandsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert LED_GPIO_CTRL to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove Beacon ControlDan Williams
For now; it's a pretty easy command to hook up and whenever OLPC figures out how they want the userspace interface to look (ie, not iwpriv commands) we can easily add it back in. Since the cfg80211 conversion it wasn't working anyway. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused Automatic Frequency Control commandDan Williams
It hasn't been hooked up to anything in a long time and it's not even listed in any of the firmware documentation I have (and I have v5.1, v8, v9, and v10). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect TPC_CFG command leftoversDan Williams
These were no longer used but were left around; Transmit Power Control is done through the lbs_set_tpc_cfg() function. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert 11D_DOMAIN_INFO to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up RSSI commandDan Williams
Convert to a full direct command; previous code rolled a direct command by hand but left the original indirect command code intact but disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up MONITOR_MODE commandDan Williams
Convert to a full direct command; previous code rolled a direct command by handle but left the original indirect command code lying around. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: disallow to set WEP key with non zero indexStanislaw Gruszka
On our hardware (050d:7050 Belkin Components F5D7050 Wireless G Adapter), setting any WEP key with non zero index, cause rx frames corruption. Note: perhaps (I did not check) this can be fixed differently - by using hw_key_idx the same as true MAC key index. But according to the comment in rt2x00mac_set_key(): "the hardware requires keys to be assigned in correct order (When key 1 is provided but key 0 is not, then the key is not found by the hardware during RX)" this will be quite problematic. Since WEP should not be used, disabling hardware crypto offload for it will not hurt much. Beside static one key WEP will still be offloaded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: truly disable encryption when initializeStanislaw Gruszka
Without cipher part nullify of TXRX_CSR0 register we can receive corrupted frames (removed IV or IVC), after reloading rt2500usb module with nohwcrypt=1 option, if previous some keys were configured into the hardware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: write keys to proper registersStanislaw Gruszka
Fix rt2500usb hardware encryption broken by commit 96b61bafe22b2f2abcc833d651739edb977f1b1e "rt2x00: Clean up USB vendor request buffer functions" Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: remove unused base_index from rate table.Senthil Balasubramanian
base index is not used anymore and so remove it. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Fix incorrect user ratekbs of MCS15 ShortGISenthil Balasubramanian
The user ratekbs of MCS15 ShortGI is incorrect and can not be lesser than MCS15 rate. This incorrect rate may affect switching to higher rates as the rate control algorithm always finds MCS15 is better than MCS15 ShortGI and results in lower throughput. Fix this by feeding the correct user ratekbs for MCS15 ShortGI rate. This issue affects 3 stream case very badly as the 3 stream rates are not used at all once we scale down to MCS15 from 3 stream rates. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Add three stream rate control support for AR938X.Senthil Balasubramanian
This patch adds 3 stream rate control support for AR938X family chipsets which supports 3 streams. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27ath9k: Introduce bit masks for valid and valid_single_stream.Senthil Balasubramanian
replace valid and valid_single_stream in rate table with bit masks and reorganize the code so adding 3x3 rate control would be easier. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27mac80211: Fix key freeing to handle unlinked keysJouni Malinen
Key locking simplification removed key->sdata != NULL verification from ieee80211_key_free(). While that is fine for most use cases, there is one path where this function can be called with an unlinked key (i.e., key->sdata == NULL && key->local == NULL). This results in a NULL pointer dereference with the current implementation. This is known to happen at least with FT protocol when wpa_supplicant tries to configure the key before association. Avoid the issue by passing in the local pointer to ieee80211_key_free(). In addition, do not clear the key from hw_accel or debugfs if it has not yet been added. At least the hw_accel one could trigger another NULL pointer dereference. Signed-off-by: Jouni Malinen <j@w1.fi> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27p54: Added get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-26rt2x00: Fix regression for rt2500pciIvo van Doorn
Since commit: commit f1aa4c541e98afa8b770a75ccaa8504d0bff44a7 Author: Ivo van Doorn <ivdoorn@gmail.com> Date: Tue Jun 29 21:38:55 2010 +0200 rt2x00: Write the BSSID to register when interface is added mananged mode in rt2500pci was broken, due to intf->bssid containing random data rather then the expected 00:00:00:00:00:00 This is corrected by sending the BSSID to rt2x00lib_config_intf only in AP mode where the bssid is set to a valid value. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: Don't set per-BSS QoS for monitor interfacesSujith
In AP mode, there is no need to notify the driver about QoS changes for the monitor interface that is created. The warning in ieee80211_bss_info_change_notify() would be hit otherwise. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: simplify noisefloor calibration chainmask calculationFelix Fietkau
The noisefloor array index always corresponds to the rx chain number it belongs to (with an offset of 3 for the extension chain). It's much simpler (and actually more correct) to directly use the chainmask to calculate the bitmask for the noisefloor array, instead of using these weird chip revision checks and hardcoded mask values. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix a small typo in the noisefloor calibration debug codeFelix Fietkau
In the noisefloor array, the extension channel values start at index 3 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k_hw: fix invalid extension channel noisefloor readings in HT20Felix Fietkau
When the hardware is configured in HT20 mode, noise floor readings for the extension channel often return invalid values, which keep the values in the NF history buffer at the hardware-specific maximum limit. Fix this by discarding the extension channel values when in HT20 mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: fix yet another buffer leak in the tx aggregation codeFelix Fietkau
When an aggregation session is being cleaned up, while the tx status for some frames is being processed, the TID is flushed and its buffers are sent out. Unfortunately that left the pending un-acked frames unprocessed, thus leaking buffers. Fix this by reordering the code so that those frames are processed first, before the TID is flushed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: fix sta assignmentJohannes Berg
I just had the following: WARNING: at drivers/net/wireless/iwlwifi/iwl-agn-tx.c:574 iwlagn_tx_skb+0x1576/0x15f0 [iwlagn]() Call Trace: <IRQ> [<ffffffff8105c5df>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8105c63a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa0290b46>] iwlagn_tx_skb+0x1576/0x15f0 [iwlagn] [<ffffffffa027076c>] iwl_mac_tx+0x5c/0x260 [iwlagn] [<ffffffffa01bdf5b>] __ieee80211_tx+0x10b/0x1a0 [mac80211] [<ffffffffa01bfb86>] ieee80211_tx_pending+0x186/0x2d0 [mac80211] [<ffffffff81062ea5>] tasklet_action+0x125/0x130 [<ffffffff810634a6>] __do_softirq+0x106/0x270 [<ffffffff8100c09c>] call_softirq+0x1c/0x30 iwlagn 0000:02:00.0: Attempting to modify non-existing station 107 Note that 107 == 0x6b which is slab poison. The reason is that mac80211 passed a freed station pointer to mac80211, because as it happened iwlwifi reset itself while mac80211 was disconnecting from the network. It turns out that we do take care to look up the station pointer in ieee80211_tx_pending_skb, but then don't use it, which obviously is a bug. Fix this by removing the ieee80211_tx_h_sta handler and assigning the station pointer directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26libertas: precedence bugDan Carpenter
Negate has precedence over comparison so the original test was always false. (Neither 0 nor 1 are equal to NL80211_IFTYPE_MONITOR). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26cfg80211: fix IBSS default management keyJohannes Berg
When wireless extensions are used to control an encrypted IBSS, we erroneously can try to set the default management key. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: remove bogus rcu_read_lock()Johannes Berg
Another remnant of the previous key locking scheme needs to be removed -- this causes a warning otherwise as ieee80211_set_default_mgmt_key will acquire a mutex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26wireless: remove unneeded variable from regulatory_hint_11d()Dan Carpenter
The "rd" variable isn't needed any more since 4f366c5dabcb "wireless: only use alpha2 regulatory information from country IE" Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26mac80211: freeing the wrong variableDan Carpenter
The intent was to free "msp->ratelist" here. "msp->sample_table" is always NULL at this point. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: Fix inconsistency between txq->stopped and the actual queue stateVasanthakumar Thiagarajan
Sometimes txq state(txq->stopped) can be marked as started but the actual queue may not be started (in ATH_WIPHY_SCAN state, for example). Fix this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath5k: snprintf() returns largish valuesDan Carpenter
snprintf() returns the number of characters that would have been written (not counting the NUL character). So we can't use it as the limiter to simple_read_from_buffer() without capping it first at sizeof(buf). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26ath9k: snprintf() returns largish valuesDan Carpenter
The snprintf() function returns the number of characters that would have been written (not counting the NUL character on the end). It could potentially be larger than the size of the buffer. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26drivers/net/wireless/wl12xx: Use kmemdupJulia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26lib80211: remove unused host_build_iv optionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26minstrel: don't complain about feedback for unrequested ratesJohn W. Linville
"It's not problematic if minstrel gets feedback for rates that it doesn't have in its list, it should just ignore it. - Felix" Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Felix Fietkau <nbd@openwrt.org>
2010-07-26minstrel_ht: remove unnecessary NULL check in minstrel_ht_update_capsJohn W. Linville
If sta is NULL, we will have problems long before we get here... Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: Felix Fietkau <nbd@openwrt.org>
2010-07-26iwlwifi: assume vif is NULL for internal scans and non-NULL otherwiseJohn W. Linville
The current practice of checking vif for NULL in one place but not another seems to confuse some static checkers, smatch in particular. Since vif will only be NULL in the case of internal scans, adjust the checks accordingly. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: remove entry for wavelanJohn W. Linville
The driver is already removed from drivers/staging. The wireless extensions part is not really valid anymore either, since wext got moved and refactored, etc. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: orphan the zd1201 wireless driverJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: orphan the raylink wireless driverJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26MAINTAINERS: mark prism54 obsoleteJohn W. Linville
The prism54 driver had an entry in feature-removal-schedule.txt and it sees very little activity other than API-change "bombing runs". The mac80211-based p54 driver should be used instead. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: silence "dubious: x | !y" sparse warningJohn W. Linville
CHECK drivers/net/wireless/rtl818x/rtl8180_rtl8225.c drivers/net/wireless/rtl818x/rtl8180_rtl8225.c:53:33: warning: dubious: x | !y The existing code is clever and works fine, but it's not worth even a single line of Sparse warning SPAM... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-26rtl8180: improve signal reporting for actual rtl8180 hardwareJohn W. Linville
Adapted from Realtek-provided driver... Signed-off-by: John W. Linville <linville@tuxdriver.com> Tested-by: Pauli Nieminen <suokkos@gmail.com>
2010-07-26wl1251: fix sparse-generated warningsJohn W. Linville
CHECK drivers/net/wireless/wl12xx/wl1251_tx.c drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: expected unsigned short [unsigned] [usertype] frag_threshold drivers/net/wireless/wl12xx/wl1251_tx.c:118:32: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: expected unsigned short [unsigned] [usertype] length drivers/net/wireless/wl12xx/wl1251_tx.c:164:24: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: expected unsigned short [unsigned] [usertype] rate drivers/net/wireless/wl12xx/wl1251_tx.c:166:22: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: expected unsigned int [unsigned] [usertype] expiry_time drivers/net/wireless/wl12xx/wl1251_tx.c:167:29: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: expected restricted __le16 [usertype] fc drivers/net/wireless/wl12xx/wl1251_tx.c:200:43: got unsigned short [unsigned] [assigned] [usertype] fc CHECK drivers/net/wireless/wl12xx/wl1251_cmd.c drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: expected unsigned int [unsigned] [usertype] rx_config_options drivers/net/wireless/wl12xx/wl1251_cmd.c:428:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: expected unsigned int [unsigned] [usertype] rx_filter_options drivers/net/wireless/wl12xx/wl1251_cmd.c:429:39: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: expected unsigned short [unsigned] [usertype] tx_rate drivers/net/wireless/wl12xx/wl1251_cmd.c:435:29: got restricted __le16 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: expected unsigned int [unsigned] [usertype] min_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:439:47: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: expected unsigned int [unsigned] [usertype] max_duration drivers/net/wireless/wl12xx/wl1251_cmd.c:441:47: got restricted __le32 [usertype] <noident> CHECK drivers/net/wireless/wl12xx/wl1251_boot.c drivers/net/wireless/wl12xx/wl1251_boot.c:228:22: warning: symbol 'interrupt' shadows an earlier one /home/linville/git/wireless-next-2.6/arch/x86/include/asm/hw_irq.h:132:13: originally declared here Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 14:51:57 +0000