summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-08-04Bluetooth: Don't send RFC for Basic Mode if only it is supportedGustavo F. Padovan
If the remote side doesn't support Enhanced Retransmission Mode neither Streaming Mode, we shall not send the RFC option. Some devices that only supports Basic Mode do not understanding the RFC option. This patch fixes the regression found with these devices. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31Bluetooth: Remove __exit from rfcomm_cleanup_ttys()Gustavo F. Padovan
rfcomm_cleanup_ttys() is also called from rfcomm_init(), so it can't have __exit. Reported-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31Bluetooth: Use list_head for HCI blacklist headDavid Miller
The bdaddr in the list root is completely unused and just taking up space. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-29cfg80211: fix dev <-> wiphy typoChristian Lamparter
Cc: Joe Perches <joe@perches.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mac80211: allow drivers to request DTIM periodJohannes Berg
Some features require knowing the DTIM period before associating. This implements the ability to wait for a beacon in mac80211 before assoc to provide this value. It is optional since most likely not all drivers will need this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29iwlwifi: fix scan abortStanislaw Gruszka
Fix possible double priv->mutex lock introduced by commit a69b03e941abae00380fc6bc1877fb797a1b31e6 "iwlwifi: cancel scan watchdog in iwl_bg_abort_scan" . We can not call cancel_delayed_work_sync(&priv->scan_check) with priv->mutex locked because workqueue function iwl_bg_scan_check() take that lock internally. We do not need to synchronize when canceling priv->scan_check work. We can avoid races (sending double abort command or send no command at all) using STATUS_SCAN_ABORT bit. Moreover current iwl_bg_scan_check() code seems to be broken, as we should not send abort commands when currently aborting. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mwl8k: change maintenance statusLennert Buytenhek
The 8366 AP support in particular is still rather incomplete, but this is unlikely to be addressed any time soon. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1271: update hw/fw version info in wiphy structJohn W. Linville
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29wl1251: update hw/fw version info in wiphy structJohn W. Linville
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29wl1271: add get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29libertas_tf: add get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1251: add get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29ar9170: add get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com>
2010-07-29mwl8k: add get_survey callback in order to get channel noiseJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-29ath9k: enable serialize_regmode for non-PCIE AR9160John W. Linville
https://bugzilla.kernel.org/show_bug.cgi?id=16476 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: stable@kernel.org
2010-07-28mac80211: inform drivers about the off-channel status on channel changesFelix Fietkau
For some drivers it can be useful to know whether the channel they're supposed to switch to is going to be used for short off-channel work or scanning, or whether the hardware is expected to stay on it for a while longer. This is important for various kinds of calibration work, which takes longer to complete and should keep some persistent state, even if the channel temporarily changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28Revert "mac80211: fix sw scan bracketing"Luis R. Rodriguez
This reverts this commit. While in theory the change is correct the patch does not address current assumptions made by some drivers, one which is definitley affected is ath9k. Prior to this change the scan complete callback would be called after we returned to the home channel and configured the hardware RX filters. After this change we call the scan complete callback prior to both the hw config and the config filter. At least for ath9k this breaks quite a few assumptions on the callback, leading to disconnects to the AP after every scan making the driver pretty useless on STA mode. The goal behind this commit was to address the now understood spurious warnings from ath9k and mac80211_hwsim on scanning on two wiphys at the same time but we have now supressed these and will address this issue in the next kernel release. When fixing this for good next we must first review the other driver's dependence on this logic and perhaps consider removal of the scan complete callback all together. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28ath9k: remove the two wiphys scanning at the same time messageLuis R. Rodriguez
When issuing two consecutive scans you could often end up getting in the logs: "ath9k: Two wiphys trying to scan at the same time" This message is due to a race in mac80211 but addressing that race requires some more major changes on the driver and perhaps optimizations on mac80211 like removing the scan complete callback alltogether. Its too late to address this this kernel release so supress the complaint and annotate this needs fixing for later. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28cfg80211: Update of regulatory request initiator handlingYuri Ershov
In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28nl80211: Fix memory leaksYuri Ershov
In case of errors during message composing msg should be freed after canceling. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28mac80211: Put some code under MESH macroYuri Ershov
In the function ieee80211_subif_start_xmit the logic related with meshdrlen is under CONFIG_MAC80211_MESH macro, but in one place it isn't. This is some update for this Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-07-27Bluetooth: Fix kfree() => kfree_skb() in hci_ath.cDan Carpenter
sk_buffs have to be freed with kfree_skb() instead of kfree(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Add __init and __exit marks to RFCOMMGustavo F. Padovan
Those annotation save memory and space on the binary. __init code is discarded just after execute and __exit code is discarded if the module is built into the kernel image or unload of modules is not allowed. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Add __init and __exit marks to UART driversGustavo F. Padovan
Those marks are useful to save space in the binary and in the memory. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Use hci_recv_stream_fragment() in UART driverGustavo F. Padovan
Use the new hci_recv_stream_fragment() to reassembly incoming UART streams. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Tested-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Test 'count' value before enter the loopGustavo F. Padovan
Testing first we avoid enter the loop when count = 0. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Fix permission of hci_ath.cGustavo F. Padovan
.c file shall not have the 'x' permission. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Defer SCO setup if mode change is pendingMarcel Holtmann
Certain headsets such as the Motorola H350 will reject SCO and eSCO connection requests while the ACL is transitioning from sniff mode to active mode. Add synchronization so that SCO and eSCO connection requests will wait until the ACL has fully transitioned to active mode. < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 12 voice setting 0x0040 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 1 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x10 handle 14 bdaddr 00:1A:0E:50:28:A4 type SCO Error: Connection Accept Timeout Exceeded Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27wireless: Convert wiphy_debug macro to functionJoe Perches
Save a few bytes of text (allyesconfig) $ size drivers/net/wireless/built-in.o* text data bss dec hex filename 3924568 100548 871056 4896172 4ab5ac drivers/net/wireless/built-in.o.new 3926520 100548 871464 4898532 4abee4 drivers/net/wireless/built-in.o.old $ size net/wireless/core.o* text data bss dec hex filename 12843 216 3768 16827 41bb net/wireless/core.o.new 12328 216 3656 16200 3f48 net/wireless/core.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27drivers/net/wireless/at76c50x-usb.c: Neaten macrosJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27drivers/net/wireless: Use wiphy_<level>Joe Perches
Standardize the logging macros used. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27include/net/cfg80211.h: Add wiphy_<level> printk equivalentsJoe Perches
Simplify logging messages for wiphy devices Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused cmd_pending waitqDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: rename lbs_get_cmd_ctrl_node() to lbs_get_free_cmd_node()Dan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: kill unused lbs_prepare_and_send_command()Dan Williams
Remove last bits of indirect command code. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert DEEP_SLEEP timer to a direct commandDan Williams
Other uses were already used direct command paths. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert PS_MODE to a direct commandDan Williams
Powersave looks like it got broken at some point but we'll fix that up when the command submission stuff is more understandable, which this series helps to do. That said, this patch should not further break powersave. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect command response handlerDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert CMD_FWT_ACCESS to a direct commandDan Williams
Slightly different approach here since there are so many arguments to the firmware command. Just let the caller fill them in before pushing the command to the firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert Mesh Blinding Table access to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert register access to direct commandsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert LED_GPIO_CTRL to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove Beacon ControlDan Williams
For now; it's a pretty easy command to hook up and whenever OLPC figures out how they want the userspace interface to look (ie, not iwpriv commands) we can easily add it back in. Since the cfg80211 conversion it wasn't working anyway. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused Automatic Frequency Control commandDan Williams
It hasn't been hooked up to anything in a long time and it's not even listed in any of the firmware documentation I have (and I have v5.1, v8, v9, and v10). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: remove unused indirect TPC_CFG command leftoversDan Williams
These were no longer used but were left around; Transmit Power Control is done through the lbs_set_tpc_cfg() function. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: convert 11D_DOMAIN_INFO to a direct commandDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up RSSI commandDan Williams
Convert to a full direct command; previous code rolled a direct command by hand but left the original indirect command code intact but disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27libertas: clean up MONITOR_MODE commandDan Williams
Convert to a full direct command; previous code rolled a direct command by handle but left the original indirect command code lying around. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27rt2500usb: disallow to set WEP key with non zero indexStanislaw Gruszka
On our hardware (050d:7050 Belkin Components F5D7050 Wireless G Adapter), setting any WEP key with non zero index, cause rx frames corruption. Note: perhaps (I did not check) this can be fixed differently - by using hw_key_idx the same as true MAC key index. But according to the comment in rt2x00mac_set_key(): "the hardware requires keys to be assigned in correct order (When key 1 is provided but key 0 is not, then the key is not found by the hardware during RX)" this will be quite problematic. Since WEP should not be used, disabling hardware crypto offload for it will not hurt much. Beside static one key WEP will still be offloaded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 00:38:46 +0000