summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-10-14arch/m68k/mm/kmap.c: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); .. if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ..> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14net/rfkill/rfkill-input.c needs <linux/sched.h>Geert Uytterhoeven
For some m68k configs, I get: | net/rfkill/rfkill-input.c: In function 'rfkill_start': | net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type As the incomplete type is `struct task_struct', including <linux/sched.h> fixes it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Atari SCSI needs NVRAMGeert Uytterhoeven
ERROR: "nvram_read_byte" [drivers/scsi/atari_scsi.ko] undefined! ERROR: "nvram_check_checksum" [drivers/scsi/atari_scsi.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: init_irq_proc depends on CONFIG_PROC_FSGeert Uytterhoeven
If CONFIG_PROC_FS is not set, I get: | arch/m68k/kernel/ints.c:433: error: redefinition of 'init_irq_proc' | include/linux/interrupt.h:438: error: previous definition of 'init_irq_proc' was here This was introduced by commit 6168a702ab0be181e5e57a0b2d0e7376f7a47f0b ("Declare init_irq_proc before we use it."), which replaced the #ifdef protection of the init_irq_proc() call by a static inline dummy if CONFIG_PROC_FS is not set. Make init_irq_proc() depend on CONFIG_PROC_FS to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: remove the dead PCI codeAdrian Bunk
This patch removes the no longer used m68k PCI code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove the broken Hades supportAdrian Bunk
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14HP input: kill warnings due to suseconds_t differencesGeert Uytterhoeven
Kill compiler warnings related to printf() formats in the input drivers for various HP9000 machines, which are shared between PA-RISC (suseconds_t is int) and m68k (suseconds_t is long). As both are 32-bit, it's safe to cast to int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: <asm/pci.h> needs <asm-generic/pci-dma-compat.h>Geert Uytterhoeven
Several multi-bus subsystems: | include/linux/ssb/ssb.h: In function 'ssb_dma_mapping_error': | include/linux/ssb/ssb.h:430: error: implicit declaration of function 'pci_dma_mapping_error' | include/linux/ssb/ssb.h: In function 'ssb_dma_map_single': | include/linux/ssb/ssb.h:444: error: implicit declaration of function 'pci_map_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_unmap_single': | include/linux/ssb/ssb.h:458: error: implicit declaration of function 'pci_unmap_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_cpu': | include/linux/ssb/ssb.h:475: error: implicit declaration of function 'pci_dma_sync_single_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_device': | include/linux/ssb/ssb.h:493: error: implicit declaration of function 'pci_dma_sync_single_for_device' or legacy drivers: | drivers/net/hp100.c: In function 'pdl_map_data': | drivers/net/hp100.c:291: error: implicit declaration of function 'pci_map_single' | drivers/net/hp100.c: In function 'hp100_probe1': | drivers/net/hp100.c:707: error: implicit declaration of function 'pci_alloc_consistent' | drivers/net/hp100.c:782: error: implicit declaration of function 'pci_free_consistent' | drivers/net/hp100.c: In function 'hp100_clean_txring': | drivers/net/hp100.c:1614: error: implicit declaration of function 'pci_unmap_single' and | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_allocate_scb': | drivers/scsi/aic7xxx_old.c:2573: error: implicit declaration of function 'pci_alloc_consistent' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_done': | drivers/scsi/aic7xxx_old.c:2697: error: implicit declaration of function 'pci_unmap_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_handle_seqint': | drivers/scsi/aic7xxx_old.c:4275: error: implicit declaration of function 'pci_map_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_free': | drivers/scsi/aic7xxx_old.c:8460: error: implicit declaration of function 'pci_free_consistent' rely on PCI DMA operations to be always available. Add #include <asm-generic/pci-dma-compat.h> to <asm/pci.h> to make them happy. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Add missing dma_sync_single_range_for_{cpu,device}()Geert Uytterhoeven
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu': | include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device': | include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device' Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the `inline' for the non-static function dma_sync_single_for_device(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Define rtc_lock on AtariGeert Uytterhoeven
The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Remove unused atari_kbd_translate()Geert Uytterhoeven
If CONFIG_VT=n, I get: | arch/m68k/atari/built-in.o: In function `atari_kbd_translate': | arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state' Just remove atari_kbd_translate(), as it's unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Modular Amiga keyboard needs key_mapsGeert Uytterhoeven
| ERROR: "key_maps" [drivers/input/keyboard/amikbd.ko] undefined! Export key_maps in the Amiga core code, as its defined in an autogenerated file (drivers/char/defkeymap.c) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Reverse platform MMU logic so Sun 3 is lastGeert Uytterhoeven
Currently Sun 3 support is the first platform option, as the Sun 3 MMU is incompatible with standard Motorola MMUs. However, this means that `allmodconfig' enables support for Sun 3, and thus disables support for all other platforms. Reverse the logic and move Sun 3 last, so `allmodconfig' enables all platforms except for Sun 3, increasing compile-coverage. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Add NOTES to init data so its discarded at bootRoman Zippel
Add .note.gnu.build-id to init data so it's discarded at boot. [Andreas Schwab] Use NOTES macro Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Put .bss at the end of the data sectionRoman Zippel
Put .bss at the end of the data section Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: Use new printk() extension %pS to print symbolsGeert Uytterhoeven
This changes the oops and backtrace code to use the new `%pS' printk() extension to print out symbols rather than manually calling print_symbol. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14m68k: use bcd2bin/bin2bcdAdrian Bunk
This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-148250: Fix lock warning (and possible crash)Alan Cox
Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal patch introduced a last minute bug. Put back the additional needed lines for the old lock init Signed-off-by: Alan Cox <alan@redhat.com> [ Ingo also reports that this can cause a spontaneous reboot crash with certain configs, and sends in an identical patch ] Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (66 commits) ata: Add documentation for hard disk shock protection interface (v3) ide: Implement disk shock protection support (v4) ide-cd: fix printk format warning piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list ide-atapi: assign taskfile flags per device type ide-cd: move cdrom_info.dma to ide_drive_t.dma ide: add ide_drive_t.dma flag ide-cd: add a debug_mask module parameter ide-cd: convert driver to new ide debugging macro (v3) ide: move SFF DMA code to ide-dma-sff.c ide: cleanup ide-dma.c ide: cleanup ide_build_dmatable() ide: remove needless includes from ide-dma.c ide: switch to DMA-mapping API part #2 ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n ide: __ide_dma_end() -> ide_dma_end() pmac: remove needless pmac_ide_destroy_dmatable() wrapper pmac: remove superfluous pmif == NULL checks ide: Two fixes regarding memory allocation ...
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits) V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default. V4L/DVB (9183): S2API: Return error of the caller provides 0 commands. V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP V4L/DVB (9179): S2API: frontend.h cleanup V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO. V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16 V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator. V4L/DVB (9175): Remove NULL pointer in stb6000 driver. V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator. V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API. V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API. V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod. V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams. V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote V4L/DVB: v4l2-dev: remove duplicated #include ...
2008-10-13ata: Add documentation for hard disk shock protection interface (v3)Elias Oltmanns
Put some information (and pointers to more) into the kernel's doc tree, describing briefly the interface to the kernel's disk head unloading facility. Information about how to set up a complete shock protection system under GNU/Linux can be found on the web and is referenced accordingly. v3: Here is some final polish including various spelling corrections pointed out by Grant Grundler and Peter Moulder. Also, I have added some information about the timing constraints related to disk head parking. The patch looks more impressive than it really is and I think it would be alright just to incorporate it into the original patch so as not to clutter up the git log. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: Implement disk shock protection support (v4)Elias Oltmanns
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: fix printk format warningAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13piix: add Hercules EC-900 mini-notebook to ich_laptop short cable listHerton Ronaldo Krzesinski
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-atapi: assign taskfile flags per device typeBorislav Petkov
There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: move cdrom_info.dma to ide_drive_t.dmaBorislav Petkov
There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ide_drive_t.dma flagBorislav Petkov
This flag is to accomodate ide-cd functionality into ide atapi. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: add a debug_mask module parameterBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: no need to zero debug_mask + move it next to module_param()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: convert driver to new ide debugging macro (v3)Borislav Petkov
Also, - leave in the possibility for optimizing away all debugging macros - add a PFX macro and prepend all printk calls with it for consistency - add debug macro calls in important driver paths - remove #if 0-ed code - mv restore_request -> ide_cd_restore_request - add a driver registration printk v2: failed_command can be NULL so check it before accessing it v3: fix another NULL ptr in debug statement There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: move SFF DMA code to ide-dma-sff.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: cleanup ide-dma.cBartlomiej Zolnierkiewicz
- s/HWIF(drive)/drive->hwif/ - s/HWGROUP(drive)/[drive->]hwif->hwgroup/ - fixup error messages in ide_dma_intr() & dma_timer_expiry() - fix checkpatch.pl errors/warnings Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: cleanup ide_build_dmatable()Bartlomiej Zolnierkiewicz
- use for_each_sg() - move printing 'DMA table too small' message below use_pio_instead label - merge '64KB bug' comment with function documentation - fix intendation There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove needless includes from ide-dma.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: switch to DMA-mapping API part #2Bartlomiej Zolnierkiewicz
Follow-up to commit 5c05ff68b9a9b40a9be949497e0aa980185565cf ("ide: switch to DMA-mapping API"): * pci_{alloc,free}_consistent() -> dma_{alloc,free}_coherent() in ide_{allocate,release}_dma_engine(). * Add ->prd_max_nents and ->prd_ent_size fields to ide_hwif_t (+ set default values in ide_allocate_dma_engine()). * Make ide_{allocate,release}_dma_engine() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n. Then convert au1xxx-ide.c, scc_pata.c and sgiioc4.c to use them. * Add missing ->init_dma method to scc_pata. This patch also fixes: - ->dmatable_cpu leak for au1xxx-ide - too early realease of ->dmatable_cpu for scc_pata - wrong amount of ->dmatable_cpu memory being freed for sgiioc4 While at it: - remove superfluous ->dma_base check from ide_unregister() - return -ENOMEM on error in ide_release_dma_engine() - beautify error message in ide_release_dma_engine() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=nBartlomiej Zolnierkiewicz
Make ide_dma_timeout() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - dump ATA Status register content on error - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=nBartlomiej Zolnierkiewicz
Make ide_dma_lost_irq() available also for CONFIG_BLK_DEV_IDEDMA_SFF=n and convert {ics,au1xxx-}ide.c to use it. While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: __ide_dma_end() -> ide_dma_end()Bartlomiej Zolnierkiewicz
While at it: - use EXPORT_SYMBOL_GPL() to match the rest of SFF DMA functions Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13pmac: remove needless pmac_ide_destroy_dmatable() wrapperBartlomiej Zolnierkiewicz
hwif->sg_nents is always != 0 when this function is called and there is also no need to explicitely zero hwif->sg_nents. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13pmac: remove superfluous pmif == NULL checksBartlomiej Zolnierkiewicz
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: Two fixes regarding memory allocationElias Oltmanns
In function ide_devset_execute() we should use __GFP_WAIT rather than GFP_KERNEL. Also, the allocation cannot possibly fail at that point. More importantly, there is a potential memory leak in the device probing code. The infrastructure seems rather complex and I hope I haven't messed anything up by trying to fix this. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> [bart: remove superfluous ide_lock taking] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: move /proc handling to ide-disk_proc.c (take 3)Bartlomiej Zolnierkiewicz
While at it: - idedisk_capacity() -> ide_disk_capacity() - idedisk_proc[] -> ide_disk_proc[] - idedisk_settings[] -> ide_disk_settings[] v2/3: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: move all ioctl handling to ide-disk_ioctl.cBartlomiej Zolnierkiewicz
While at it: - idedisk_ioctl() -> ide_disk_ioctl() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: move /proc handling to ide-floppy_proc.c (take 2)Bartlomiej Zolnierkiewicz
While at it: - idefloppy_capacity() -> ide_floppy_capacity() - idefloppy_proc[] -> ide_floppy_proc[] - idefloppy_settings[] -> ide_floppy_settings[] v2: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: move all ioctl handling to ide-floppy_ioctl.c (take 2)Bartlomiej Zolnierkiewicz
While at it: - idefloppy_ioctl() -> ide_floppy_ioctl() v2: Fix for idefloppy_ioctl name change from Stephen Rothwell. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: no need to zero drive->special.allBartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()Bartlomiej Zolnierkiewicz
Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI device drivers *_setup() methods. While at it: - use ata_id_cdb_intr() There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove ide_host_alloc_all()Bartlomiej Zolnierkiewicz
* Remove no longer used ide_host_alloc_all(). * Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS as the maximum number of host ports possible. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-generic: remove no longer needed ide_probe_legacy()Bartlomiej Zolnierkiewicz
There is now a generic solution [ide_generic_check_pci_legacy_iobases()] so MIPS-specific ide_probe_legacy() is no longer necessary. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-generic: no need to probe all ports at onceBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>